I have a laptop and wanna have it set up for going to sleep and waking up at certain time and then run certain files/programs. I used a single program for this back in windows but cant remember the name. Do yo know a program that will do this for me?
View 6 Repliesuser of Kubuntu 10.0.4. So far, one of the major things I miss is the ability to have my system sleep when I close the lid of my laptop. Any tips on how to enable this behavior? Note: as I said, I'm brand new to linux, so the simpler you can explain things, the better!
View 2 Replies View RelatedSince installing 10.04 yesterday my laptop will not wake correctly from sleep mode. Opening the lid wakes the machine up but the graphics are all wrong. Loads of tightly packed horizontal lines. Turning the machine off and restarting makes all ok. It's only on wake up does the problem happen. The laptop is an Acer 1652,with an ATI Mobile Radeon X300 graphics card. Intel Pentium M.
View 1 Replies View RelatedI have a WD MyPassport 320GB external hdd and Ubuntu 10.10. The problem is that I can't access my drive after waking from sleep. I can't even unmount it; gives me an error like: "umount: /media/0A26FE8626FE71D5 mount disagrees with the fstab".
View 2 Replies View RelatedAt home in Guangzhou, I have no problem connecting to a WPA-secured wireless router.Now I'm on vacation in another city trying to use a dLink DI-624 router. If I connect immediately after reboot, no problem. If I suspend the session and then wake the machine up again, it will try to connect and then tell me WPA authentication failed.This happens both with network manager and wicd.sysinfo says the network controller is an Atheros AR9285 (ethernet is Realtek RTL8101E/8102E, probably not relevant).Since everything works correctly with routers other than the dLink, I'd have to guess it's not a general wireless configuration problem, nor a wireless card malfunction. Maybe some bad handshaking that manifests only after waking from sleep?More out of curiosity -- I'll only be here for a few weeks and a wired connection is readily available. But, say I end up in a hotel somewhere that uses dLink for WiFi
View 2 Replies View RelatedI have had a issue with the trackpad not working (cursor does not move, does not click) after I wake up my MacBook Pro 4,1 from sleep. I am pretty sure this is an X issue and not a driver issue because if I log out the trackpad works again. This is also sporadic. Sometimes it occurs, sometimes it does not. Is there some configuration I need to set to fix this?
View 3 Replies View RelatedI have Fedora 10 x86_64 installed on my Think Pad T61p and when ever I put it to sleep and then try to wake it back up, it doesn't wake back up, all I get is a blank screen
View 2 Replies View RelatedUpgraded to Ubuntu 10.10 recently. (Now that was a mistake...) Problem occurring now that when I close lid of my laptop (Asus K40IN series) , which I set to suspend, it won't wake up (and I have to shut down and reboot). It used to be fine (in both Windows and 10.04) though so must've something to do with the upgrade to 10.10.
View 2 Replies View RelatedMy AspireOne with Xubuntu 11.04 goes back to hibernate just after I hit a key to wake it up. I recorded a video of the problem, but this forum won't allow me to post the link. I guess you can PM if you want to watch the problem.
The trouble started immediately after I followed the instructions to test out Unity. I was going to post the link, but again, noobs like me can't do that.
I am having problems with my wuxga 1900x1200 laptop display.The machine is a Dell inspiron 8600 with nvidia chipset.I am running driver 175 from the Karmic repo. My problem is when the machine wakes up after a suspend, the display blooms to bright white.The only way I have found to recover is power off the machine. After a bit of research I suspect it may be the refresh rates in xorg.conf, but lowering the values has not changed anything. Here is what I have currently.
Code:
# nvidia-xconfig: X configuration file generated by nvidia-xconfig
# nvidia-xconfig: version 1.0 (buildmeister@builder75) Wed Jan 27 03:02:48 PST 2010[code]....
orig values were horiz 30-128 and vert 50-90.I'm not sure it's the refresh...
I have upgraded from Ubuntu 9.x to 10.04 LTS after the upgrade, my netbook goes to sleep in a short period of time and makes me login every time i resume. This is very annoying as i have to wait for login and sometimes my wifi connection drops. I just quickly want to check my messages. The delay is annoying and has me using a windows (argh) laptop instead. i miss my ubuntu netbook.
i have tried adjusting power management setting to never go to sleep and adjusted some other power management module from the command line, but with no luck. is there a way to reset the sleep pref's or any way to fix this.
All audio and sounds work just fine until I close my laptop's lid for a spell and reopen. On resume, there is simply no sound at all. It's all fixed when I restart, but being a laptop, I like being able to close the lid and come back to it every now and then.
I believe it's an issue from when Ubuntu changed their audio in the transition between Jaunty and Karmic, and it never got fixed. FYI, it worked just fine in Jaunty.
From past postings and research, it seems to be a lack of something 'waking up' or restarting when the lid opens. However, it's not 'alsa restart' or 'pulseaudio restart' or whatever. It's one little bug that keeps me from having sound without a restart.
Did an upgrade from 10.04 to 10.10 and it was very smooth. One minor issue is now when I close my laptops lid (Sony Vaio) it does not sleep it just shuts downs. Same with habernate. It just shuts down all together. Then when I boot I get a brief error message to fast to read and the old 10.04 password screen rather than the new 10.10. This does not happen when I just shut down from inside Gnome and this never happened in 10.04. I am using generic video settings and all else works a charm.
View 7 Replies View RelatedI had screwed up a unsolvable Ubuntu install, so I had to reformat and reinstall. I did all that, installed my apps, but then saw and was convinced to upgrade to 10.10. It took forever, but it downloaded and installed the upgrade package. Since then, I have had a few issues that I had never had in 10.04. The other ones are in their own threads though. So, now when I either close my laptop lid or hit suspend, I can see it do some things, then either A. It goes to sleep. Or B. It just freezes.
No HDD activity, just those messages it displayed for suspending like it does when it works. I have screenshots attached of that. Also, in the default applet that provides you with the sleep option and shut-down, etc, sometimes the option Hibernate disapears. Now, I have seen how the menu is without it and like it that way. I think I need to be looking for a prefrence file for it, because I would like the option Hibernate to be removed from that menu.
1. How can I get the machine to go to sleep properly? This is mainly because I hate loosing what I am doing.
2. How do I remove the option "Hibernate" from Indicator Applet Session 0.4.6?
Running Ubuntu 11.04 on a Gateway LT3103U netbook. It's running fine except for that fact that when it goes to sleep (timeout or lid closed) or going into suspend or otherwise restarted/shutdown, my router restarts. It's a DLink DIR-655 that has been working fine until I changed this netbook to Ubuntu.After installing Ubuntu on the netbook, it found my SSID being broadcast and I added the connection by supplying the WPA2 password. I have full network access (local and internet).
It's just the router restarts and all my other machines lose connections. The router is using DHCP but supplying IPs based on MAC. Netbook is set to use DHCP.
I have a HP laptop with an internal tv-tuner card, which i use once in a while, because i don't have a tv. The problem is, that the kernel module i installed to make this piece of hardware work, for some reason makes my laptop unable to sleep. So if i want to suspend my pc, i have to first unload the module, using
[code]...
My laptop won't wake from sleep. I hit the powerbutton and it'll blink a few more times, turn green and the keys will light up but the screen stays black.
Running sony vaio s with windows 7 and 11.4 duelboot. I really need it to be able to suspend and wake because I'll be taking it to college in the fall.
I am using a old laptop as a server now and its running great! I would like to disable sleep/hibernation when I close the lid (i would prefer the screen still shut off if possible) ...
This has to be done via command line because I don't use a gui ...
Installed openSUSE into my Thinkpad T410 and noticed that when I closed the laptop lid, the moon icon does not light up.
Reopening the lid and will see a screensaver password screen immediately.
Does this means that the laptop does not have Sleep (or is it called hibernate) mode enable? How can I enable it?
This also happens with Debian that this laptop is dual booted with.
I have an old Acer laptop that I am trying to use as a server for Vortexbox (Fedora distro that turns computer into a media server for use with DLNAh Squeezeboxes).Randomly the laptop will go into standby mode and I cannot figure out why. It's very annoying since when the laptop goes to standby the server goes down and all my boxes disconnect. Everything reconnects when I simply press a key on the laptop and it wakes up and the screen turns back on.Here's what I've tried:I've tried checking the BIOS for power management settings and there are none.
I think my CMOS battery is fried since the time keeps drifting. I tried to replace it but could not get to the battery (either through the keyboard or the back of the laptop) so I put in a cron.hourly script that would fix the time every hour and it's keeping things on point in terms of the time but the sleep issues are still there (of note the script does not run when the laptop is sleeping). This is my first script eveo I'm a big newbie...The laptop battery is nonfunctional (I leave it plugged in all the time anyway). Not sure if that has anything to do with it.I installed FreeNX and NoMachine for remote desktop to Gnome. When I have a remote desktop session open on another computer it SEEMS to last longer between sleeping.I tried reading about ACPI and sleepstates and I'm totally lost. I downloaded some thing called ACPItool and ran it to get the following output:
[vortexbox.localdomain ~]# acpitool -e
Kernel version : 2.6.30.10-105.220090320 - ACPI version : 20090320
Battery #1 : present
[code]...
Note: I use debian testing.GUI very frequently completely breaks for me, it looks like this:URL....It usually happens after a short freeze or after going back to GUI from TTY (which doesn't display because of a known Nvidia proprietary driver issue).And sometimes my laptop goes into sleep state by itself while it's being used. This is lenovo ideapad z510 laptop, with intel+nvidia GPU (nvidia Optimus). To use nvidia GPU I use bumblebee.
View 2 Replies View RelatedInstalled Squeeze into my Thinkpad T410 and noticed that when I closed the laptop lid, the moon icon does not light up.Reopening the lid and will see a screensaver password screen immediately.Does this means that the laptop does not have Sleep (or is it called hibernate) mode enable? How can I enable it?[Solved]Managed to found out what I've done wrongFor KDE users, go to the menu-> Power Management-> Chose the Profile as Powersave
View 1 Replies View RelatedMy laptop, which is running Ubuntu 9.10, will periodically make a sound that sounds like someone is plugging something into a sound jack. I will try to get a recording of it, but that doesn't seem likely anytime soon. I tried disabling my internal mic, and that didn't fix it. It makes it even when my speakers are muted, which makes me think it's because some hardware is not correctly configured. I have an HP dv6236us laptop.
Here is my lspci output. Dunno if it will help, but it can't hurt: Code: 00:00.0 Host bridge: Intel Corporation Mobile 945GM/PM/GMS, 943/940GML and 945GT Express Memory Controller Hub (rev 03) 00:02.0 VGA compatible controller: Intel Corporation Mobile 945GM/GMS, 943/940GML Express Integrated Graphics Controller (rev 03)
[Code].....
I have Debian Jessie 8 installed on a Acer 5733 Laptop. After I closed the screen, it goes sleeping, and when I open it, aleatory, it freezes. I don't have graphical interface, and the tty are not accessible. Sometimes, I get access to the computer 10 seconds, and then freeze.I have to shutdown the computer...and lose my work I was doing.I thought it was a X-problem, but the tty don't work too, so it's not ? When I restart the computer, it shows Code: Select allclearing orphaned inode <some inode number.
View 0 Replies View RelatedI dont want to go by synaptic application one by one for update the whole thing!
Surely there should be a easier way!
I was thinking there must be a command which would list all the package installed on my old PC
and then take that list to synaptic some how to look for the newest package on the repository and install it!
I have a strange problem in my new debian 8.3 LXDE install. Every time I boot my laptop it goes in to sleep mode automatically after a min. It is a default install and I have not configured any power management options. How do I find out the reason for the automatic sleep and how can I rectify it?
View 4 Replies View RelatedI installed Kubuntu 11.4 (64 bit). But now I can't update it, all time it shows error Now I wanna uninstall Kubuntu and also wanna install Ubuntu Please tell me how to uninstall kubuntu without losing any data. I'm also user of Windows 7. I installed kubuntu as duel boot. now need to uninstall kubuntu without making any change of my laptop and wanna intall Ubuntu as duel boot.
View 9 Replies View RelatedLast week I installed suse 11.3. Most of the time it runs fine, but sometimes my laptop just hangs. Mostly I'm just browsing the internet using firefox. For example when I just installed opensuse, and I tried to maximize the terminal window it would hang and not recover. I'm not sure what is causing it. When it hangs I also can't move the mouse pointer, or open the system activity window. I'm not sure I have the minimum specs for kde though, but I can run kde without any problems, it's fast, it reacts fast. At first I thought maybe the amount of ram 512 was not enough so I turned off all the kde effects, but it still seems to crash once in while. I tried checking .xsession-errors to see if I could find something, and I found this
Code:
updateapplet(2142): Failed to lock file "/var/tmp/kdecache-donald/kpc/kde-icon-cache.lock" , last result = 1
"/usr/bin/kdeinit4(2127)" Error in thread 3041617680 : "org.freedesktop.DBus.Error.ServiceUnknown - The name org.kde.nepomuk.services.nepomukstorage was not provided by any .service files"
"/usr/bin/kdeinit4(2127)" Error in thread 3041617680 : "QLocalSocket::connectToServer: Invalid name"
"/usr/bin/kdeinit4(2127)" Error in thread 3041617680 : "org.freedesktop.DBus.Error.ServiceUnknown - The name org.kde.nepomuk.services.nepomukstorage was not provided by any .service files"
"/usr/bin/kdeinit4(2127)" Error in thread 3041617680 : "QLocalSocket::connectToServer: Invalid name"
"/usr/bin/kdeinit4(2127)" Error in thread 3041617680 : "org.freedesktop.DBus.Error.ServiceUnknown - The name org.kde.nepomuk.services.nepomukstorage was not provided by any .service files"
"/usr/bin/kdeinit4(2127)" Error in thread 3041617680 : "QLocalSocket::connectToServer: Invalid name"
Connecting to deprecated signal QDBusConnectionInterface::serviceOwnerChanged(QString,QString,QString)
I'm using Slackware 13.1 on my laptop, and sometime ago it make some beeps on shutdown, and when I don't find any word on a page on Firefox(using the find tool on Firefox).
View 2 Replies View RelatedUntil now i haven't had to dabble with bash scripts.
I have a program that reads in data files. These are named datafile01_R, datafile01_G, datafile01_B, they then increment, so datafile02_R etc i have about 600 of these. the program reads in 3 data sets at a time from each run, so files_01 r, g, and b.
The program then does its magic, and outputs about 40 different files, depending on the file, they gone to folders named R, G, B, psa, or tracking.
The program itself has configuration files to say where the files should gone when analyzed, there is also the config files that reads in the data sets.
At the moment i have to run one set of data, then go in and manually change the input file location, and run again. But, doing this, even though a different data set, the new set overwrites the old set in one of the output folders. So i need a way to increment the output filenames after they are written and before the program is run again with the new data set.