Ubuntu :: 10.04 Not Waking Properly From Sleep Mode
Apr 30, 2010
Since installing 10.04 yesterday my laptop will not wake correctly from sleep mode. Opening the lid wakes the machine up but the graphics are all wrong. Loads of tightly packed horizontal lines. Turning the machine off and restarting makes all ok. It's only on wake up does the problem happen. The laptop is an Acer 1652,with an ATI Mobile Radeon X300 graphics card. Intel Pentium M.
I have Fedora 10 x86_64 installed on my Think Pad T61p and when ever I put it to sleep and then try to wake it back up, it doesn't wake back up, all I get is a blank screen
I have a laptop and wanna have it set up for going to sleep and waking up at certain time and then run certain files/programs. I used a single program for this back in windows but cant remember the name. Do yo know a program that will do this for me?
I have a WD MyPassport 320GB external hdd and Ubuntu 10.10. The problem is that I can't access my drive after waking from sleep. I can't even unmount it; gives me an error like: "umount: /media/0A26FE8626FE71D5 mount disagrees with the fstab".
At home in Guangzhou, I have no problem connecting to a WPA-secured wireless router.Now I'm on vacation in another city trying to use a dLink DI-624 router. If I connect immediately after reboot, no problem. If I suspend the session and then wake the machine up again, it will try to connect and then tell me WPA authentication failed.This happens both with network manager and wicd.sysinfo says the network controller is an Atheros AR9285 (ethernet is Realtek RTL8101E/8102E, probably not relevant).Since everything works correctly with routers other than the dLink, I'd have to guess it's not a general wireless configuration problem, nor a wireless card malfunction. Maybe some bad handshaking that manifests only after waking from sleep?More out of curiosity -- I'll only be here for a few weeks and a wired connection is readily available. But, say I end up in a hotel somewhere that uses dLink for WiFi
I have had a issue with the trackpad not working (cursor does not move, does not click) after I wake up my MacBook Pro 4,1 from sleep. I am pretty sure this is an X issue and not a driver issue because if I log out the trackpad works again. This is also sporadic. Sometimes it occurs, sometimes it does not. Is there some configuration I need to set to fix this?
Is anyone else having trouble with waking up from suspend mode? After bringing the computer (Dell Studio 1555) back from suspend mode, GNOME moves very slowly. Cursor is unresponsive for significant amounts of time - any open windows do not respond to selection... Effects don't usually go away until a reboot is performed. This evening, one such restart resulted in a crash, where the shutdown process locked at the attempt to shut down the mouse/pointer module..
Asus u43f wont go into sleep/suspend mode. Either manually from the shut down menu or by closing the lid. the screen will turn off but the various lights do not turn of and hard drive continue to spin.
I found this suggested test with a google search but no fix
sudo /etc/acpi/sleep.sh
which returned:
cat: /var/lib/acpi-support/system-manufacturer: No such file or directory cat: /var/lib/acpi-support/system-product-name: No such file or directory cat: /var/lib/acpi-support/system-version: No such file or directory cat: /var/lib/acpi-support/bios-version: No such file or directory
I'm on the computer for 15 min, and then it randomly goes into a sleep mode, and I can't recover it (system lights are on, monitor on, mouse/keyboard fine). I've replaced pulseaudio with alsa, and whenever I go into the screensavers tab to disable sleep mode, the computer does its thing and randomly goes to sleep. This is REALLY frustrating because I leave the computer on for downloads, but when I come to check on them the computer has gone to sleep, and I et corrupted files on my HDD. How to disable sleep from terminal?
i'm having this problem:when i put Fedora to sleep the system disconnect all my usb (or so i think)basically i can't wake up my computer becouse there is no where to do it.it gets back to normal after i power it off/on...how can i fix this?please since i'm new both to fedora and linux try to be detailed with the explanations, or there is a good chance i won't understand a thing
My screen has started going into sleep mode if the computer is idle for around ten minutes - sometimes longer, no discernable pattern. The setting is of course set to 'never' in System / Preferences / Power Management
I upgraded to fedora 11 from fedora 10 yesterday, I like it ok but when I put the machine in sleep mode and then go to turn it back on it comes up to the log in screen and thats it its frozen. I hate to completely shut down the machine every time I get off.
I have to questions: I am new with Linux and using ubuntu on my laptop computer. when i reopen my leptops cover after i closed it, meaning - putting computer to sleep, every thing is working, but the screen is black and nothing is seen. No matter what i tried to do, i cant make it to "wake up".
Using the computers battery, with no electric supply, the battery time is only half of what i get when using windows. i tried using less lumination but it didnt seem to help.
Recently did a fresh installation of Maverick 10.10.and have hopefully everything including the updates, etc.But...I have the following problems, Not been able to get the "auto-login" to work ...(systems/administration/login screen), and I've unable to switch off the "sleep mode", of which I tried to change in..systems/preferences/power management).
Gnome would sleep after specified 10 min and put this machine into <1 Wt saving mode.KDE just invokes screensaver and turns off display. It won't even spin down HDDs.There are no profiles in KDE power settings and I can't create any - create button works, but 'new profile' dialogue does not actually create any profiles.This is a brand new default install of F14 on AMD 890 chipset.
1. start Firefox, but it goes into sleep mode. no matter reboot machine, etc.
2. after entered a static IP address in network manager, fedora hanged in boot process, halted in "send email" which is one of many processes at boot up.
Used DHCP, can ping to other PC in LAN, but can't go internet.
Linux downloaded new updates and worked perfectly. Next time I started mint, just before the login screen appears display says No Signal and goes in sleep mode. I think that mint downloaded somekind of display driver update wich is not compatible with my driver card. I can't see desktop, I just hear the login sound and that's all. What should I do? I'm new with linux.
I am using Ubuntu 10.10 on an IBM ThinkPad t43. I have a 9 volt battery that I use only occasionally. Usually I use the AC connection and when I'm finished working I leave the laptop in "sleep" mode. (Not always, but often.) When using the AC is it okay to leave the battery in the computer or is it better to remove it? Some swear it shortens the battery's life to leave it installed when not in use. Others swear--with equal fervor--that the newer ion batteries know when they are fully charged and don't have to be removed. Which is true? It's inconvenient to keep taking the battery in and out, but if it's necessary to prolong it's life I guess it's worth it. Some clarity good because, as I said, you can find equally impassioned arguments for both sides of this issue.
after totem is done playing a movie from my external harddrive ( usb 2.0 750 gb Western Digital HDD) the computer screen will go blank but the computer will not suspend or hibernate. I have gnome-power-manager to go to suspend after 30 min of inactivity. I will usually fall asleep during the movie and the laptop will remain on. I will wake up to find the laptop on for the whole night and that it didn't go to sleep or suspend power after the movie stopped. Note ** I have already tried reinstalling gnome-power-manager & totem ... Also have turned on and off Dbus plugin, and totem is not set to always on top.
I recently came to Debian. As I have an ati card, I tried the proprietary drivers first, but then came back to radeon (open-source). In the process, I think I may have broke my xorg.conf . Sometimes, when the monitor goes into sleep mode, when I came back, the screen remains black (sometimes I see just the cursor).
Here is my xorg.conf # NOXORGCONFEXISTED: No X.org configuration file existed when this backup was created.
Also, I have lots of backups in my X11 folder, like xorg.conf.fglrx-3, xorg.conf.original-1, or backup.xorg.conf. Is it safe to remove them? What should I do about the main xorg.conf?
Installed Squeeze into my Thinkpad T410 and noticed that when I closed the laptop lid, the moon icon does not light up.Reopening the lid and will see a screensaver password screen immediately.Does this means that the laptop does not have Sleep (or is it called hibernate) mode enable? How can I enable it?[Solved]Managed to found out what I've done wrongFor KDE users, go to the menu-> Power Management-> Chose the Profile as Powersave
I've tried ubuntu, kubuntu, fedora and linux mint. all 64 bit versions. I've also tried to suspend through applications like acpitool. But nothing works. When I click on Suspend, the screen goes blank but the computer is still running. The wireless network adaptor gets disabled for a second and then comes back on. All I have to do is press a key and I get the unlock screen prompt. Basically, suspend works like 'Lock Screen'. I have a HP Pavillion laptop. Core 2 Duo @ 2 GHz and 4 GB RAM.