Ubuntu :: Laptop Screen Blooms To Bright White After Waking From Suspend?
Mar 14, 2010
I am having problems with my wuxga 1900x1200 laptop display.The machine is a Dell inspiron 8600 with nvidia chipset.I am running driver 175 from the Karmic repo. My problem is when the machine wakes up after a suspend, the display blooms to bright white.The only way I have found to recover is power off the machine. After a bit of research I suspect it may be the refresh rates in xorg.conf, but lowering the values has not changed anything. Here is what I have currently.
Code:
# nvidia-xconfig: X configuration file generated by nvidia-xconfig
# nvidia-xconfig: version 1.0 (buildmeister@builder75) Wed Jan 27 03:02:48 PST 2010[code]....
orig values were horiz 30-128 and vert 50-90.I'm not sure it's the refresh...
View 4 Replies
ADVERTISEMENT
Apr 10, 2010
I've got Karmic installed on an HP 6930p, and with relatively little intervention, all hardware has been supported beautifully. I'm using the ATI driver for graphics. Battery life increased dramatically after an update a couple of months ago. However, occasionally (1 in 8 times maybe), the screen is black when waking from suspend. Disk wakes, etc, but the screen is off. Trying to re-suspend with fn key doesn't work. Ctrl-alt-f key combos don't work. I have to hold the pwr button down.
View 5 Replies
View Related
Oct 25, 2010
If I suspend this toshiba satellite, and the battery is or gets low it will wake from suspend to tell me that it will need to suspend due to a critical low battery. Which is pretty dumb. I've experimented with this by plugging and unplugging the ac adapter.
View 1 Replies
View Related
May 29, 2011
I've been away from Kubuntu for a while but came back when Kubuntu 11.04 was released because it's awesome. I have a newer laptop since then, a Latitude E6410 with Intel graphics and 8GB of RAM. Everything works great, except......Sometimes when I resume from suspend to RAM, the screen flickers with thin white lines across the screen. I can switch to a tty and reboot it from there, but I'm unable to use KDE until I reboot. A lot of times resuming from suspend works without issue, but sometimes this problem occurs. I haven't figured out exactly what triggers it. In fact, the most recent time it happened, I didn't even have an application open.
I would like to figure this out because I use suspend a lot. I rarely turn off my laptop unless an update requires me to. I prefer to be able to close my lid and resume whatever I was working on later, but with this glitch I cannot trust it to do that.
View 5 Replies
View Related
Feb 4, 2010
when I put my lappy to sleep, it looks as if it sleeps well.the light blinks, just like when it did on windows when it slept but when I try to wake it up, it powers up the fan and hdd and i see nothing on my screen, it doesn't even light up.I am always forced to do a hard reset.do I need to blacklist a driver or something?
View 5 Replies
View Related
Jul 5, 2011
when I put my lappy to sleep, it looks as if it sleeps well.... the light blinks, just like when it did on windows when it slept but when I try to wake it up, it powers up the fan and hdd and i see nothing on my screen, it doesn't even light up!! I am always forced to do a hard reset I followed a debug tutorial and got this out of it:
[ 1.355059] Magic number: 0:291:740
[ 1.355065] hash matches /build/buildd/linux-2.6.31/drivers/base/power/main.c:419
do I need to blacklist a driver or something?
View 2 Replies
View Related
Dec 18, 2010
Is there a way to check what caused Ubuntu to wake from suspend mode?
Ubuntu 10.10 on a desktop.
Have tried disabling all BIOS wake events (and WOL).
Have ensured mouse doesn't move.
Need a way to know what caused it to wake. Happens 90% of the time, usually 3 seconds after it suspends.
View 2 Replies
View Related
Mar 3, 2011
I have an Intel DG35EC motherboard with on-board NIC. It is an Intel 82566 Gigabit NIC. It is wired, not wireless. I am using an Ubuntu "Live CD". Just out of curiosity (to see if it worked), I "suspended" Ubuntu and it suspended very well, but when I "resumed" Ubuntu the NIC would not connect back to the network. If I actually installed Ubuntu and didn't use a "Live CD" do you think it would behave differently?
View 1 Replies
View Related
Dec 15, 2010
I'm using ubuntu 10.10 on an hp pavilion dv9620.
For some reason, all of the sudden;
-my computer quit waking from suspend
-when my computer reboots (because I had to hold in power switch until it restarted) some of the items on my screen looks wierd for a few minutes, like there are tracers on some items (dock, top of screen, etc)
-when i try to wake my computer from suspend, the screen is a funny gray color with wierd blobby shapes that move around a little bit. And of course, doesn't load GUI or anything like that, just gray screen.
View 2 Replies
View Related
Aug 10, 2011
I'm looking to find a way to schedule my computer to wake up at say 7:00am. Every night before I go to bed, I put my computer into suspend so the fan doesn't wake me (old computer). I can't seem to find a task scheduler that allows me to be able to wake the system.
View 6 Replies
View Related
Feb 22, 2010
Is anyone else having trouble with waking up from suspend mode? After bringing the computer (Dell Studio 1555) back from suspend mode, GNOME moves very slowly. Cursor is unresponsive for significant amounts of time - any open windows do not respond to selection... Effects don't usually go away until a reboot is performed. This evening, one such restart resulted in a crash, where the shutdown process locked at the attempt to shut down the mouse/pointer module..
View 3 Replies
View Related
Apr 26, 2011
I have a new clean install of 64bit current slackware on a machine which previously run 12.1 to 13.1. It had suspend to ram working quite reliable before, but now i get black screen (sometimes with nonresponding mouse cursor on it) at every second or third wake-up.
I found out that it is not a complete lockup - full access to kde desktop could be restored by hitting alt+sysrq+s followed by alt+sysrq+l several times. I wonder what is causing this? How to get it to wake up normally at once?
Edit: I've installed latest nvidia drivers (260.19.44) for GeForce 8500GT card - previous version (260.19.21) of drivers exhibited the same behaviour in my current install of slack.
View 2 Replies
View Related
May 12, 2010
It's been a while now I've been experiencing an annoying issue with F12. The thing is that after the machine resumes from suspend (which is otherwise a perfect procedure), video performance (and sometimes audio, through Rhythmbox) reduces and videos play sluggishly. Rebooting the system fixes the issue.
Is there a solution for this behavior (other than rebooting)? Here are the details of my system: F12 x86_64 on an ATI graphics powered machine (Radeon HD3200) which obviously uses the free drivers mesa-drivers-dri-experimental which, otherwise work perfect on this hardware.
View 2 Replies
View Related
Dec 14, 2010
I like to suspend my laptop when I close the lid. I have squeeze installed. When I open the laptop lid all lights indicated that it coming out of suspend but the monitor stays black. It is worse since I install the ati drivers for the card instead of the xorg. It did it with both but worse with nonfree drivers. I can get it to come out by ctrl alt f2 and the ctrl alt f7. However yesterday that did not work but that was the first time. My laptop is an acer 5251-1513 amd processor v120, and hd 4250 radeon
View 6 Replies
View Related
Jun 22, 2011
I'm running Debian Squeeze on a Dell Studio 1558 laptop, and I have my laptop set to suspend when my lid is closed. Resuming from suspend seems to work but the screen remains blank, forcing me to hard reboot every time. Upon reading this thread
Code:
Tue Jun 21 23:07:12 AKDT 2011: performing suspend
Tue Jun 21 23:07:28 AKDT 2011: Awake.
[code]...
View 1 Replies
View Related
Jun 22, 2011
I'm running Debian Squeeze on a Dell Studio 1558 laptop, and I have my laptop set to suspend when my lid is closed. Resuming from suspend seems to work but the screen remains blank, forcing me to hard reboot every time. Upon reading this thread:
Tue Jun 21 23:07:12 AKDT 2011: performing suspend
Tue Jun 21 23:07:28 AKDT 2011: Awake.
Tue Jun 21 23:07:28 AKDT 2011: Running hooks for resume
[code]...
View 8 Replies
View Related
Feb 26, 2011
I'm using a dell latitude d630 with an nvidia quadro 135M card. I'm able to suspend without any problems while running the X server. If I try to suspend on console without the X server running, the laptop wakes up to a blank screen. The screen remains blank and my only resort is to type sudo halt (with the screen off).I'm using the proprietary nvidia driver with the nvidia-kernel package on testing.
View 4 Replies
View Related
May 2, 2010
I have a Sony Vaio VGN-FZ340E. I installed Ubuntu about 6 months ago and had a problem-free time with it. I then got busy with other stuff (house work, etc.) and hadn't worked on Ubuntu for about a month. Now I switch on my Vaio with Ubuntu and I find the screen is just too bright.Since 10.04 was just coming up, I thought this would be fixed when I update. I updated, but the screen is still too bright.
I searched the forum for answers and found only some pretty old threads which were about the Fn key combos (which, obviously, doesn't work), spicctrl, etc.So I followed the instructions here. I did just what Step 1: Checking for Module says, but Terminal just doesn't give any output.
View 1 Replies
View Related
Apr 13, 2011
Upgraded to Ubuntu 10.10 recently. (Now that was a mistake...) Problem occurring now that when I close lid of my laptop (Asus K40IN series) , which I set to suspend, it won't wake up (and I have to shut down and reboot). It used to be fine (in both Windows and 10.04) though so must've something to do with the upgrade to 10.10.
View 2 Replies
View Related
May 23, 2011
3 questions i have about "pm-suspend-hybrid"
1. is it possible to schedule this command in the same manner as shutdown ? eg sudo shutdown -h 60
2. is it possible to schedule the laptop to come out of suspend ?
3. i have a usb sound card (xfi go). when waking from suspend, the internal sound card is selected. i have to manually select the external sound card & for whatever reason, also unmute it too
View 1 Replies
View Related
Apr 6, 2010
I'm running Fedora 12 x86_64 Gnome and my video card is an ATI Radeon HD 3650. I'm using the open source video driver.After updating the kernel to version 2.6.32.9-70, my LCD display has started being too bright, which makes it barely readable.The problem is still there after upgrading to kernel 2.6.32.10-90. I've even tried to boot a live USB of Fedora 13 Alpha (desktop-x86_64-20100404.17.iso - downloaded from here - which ships with kernel 2.6.33.1-19)
View 6 Replies
View Related
May 31, 2010
I have a laptop and wanna have it set up for going to sleep and waking up at certain time and then run certain files/programs. I used a single program for this back in windows but cant remember the name. Do yo know a program that will do this for me?
View 6 Replies
View Related
May 23, 2011
My AspireOne with Xubuntu 11.04 goes back to hibernate just after I hit a key to wake it up. I recorded a video of the problem, but this forum won't allow me to post the link. I guess you can PM if you want to watch the problem.
The trouble started immediately after I followed the instructions to test out Unity. I was going to post the link, but again, noobs like me can't do that.
View 1 Replies
View Related
May 28, 2010
today while using 10.04 Lucid Lynx 64 bit I decided to do something about the low resolution boot screen, I've seen the bugs thread but I thought startup manager would be the way to go Anyway I changed the resolution and the bits to the highest they would go I rebooted and I got the normal coloured boot screen but no logo just text, then I tried disabling text and enabling the boot logo Then I rebooted and the same thing again Then I removed startup manager and the whole boot screen turned bright pink and still had a text logo!
View 9 Replies
View Related
Aug 3, 2010
I'm running Slackware64 13.1. When I change the bright of my screen, xfce power manager show a info bar. But now it disappear, when I run xfce4-power-manager from a terminal I get this info:
Quote:
Another thing, Slackware don't have cpu governors?
View 7 Replies
View Related
Mar 5, 2011
Running Fedora 14, and when I wake the computer after not using it for a few hours I get a black screen with only the mouse pointer visible. This can sometimes be for a minute or up to 5 or 10 minutes, I'm not quite sure what the issue is. I have the screen saver set to blank screen, and I have the computer set to never go into sleep mode, however the display turns off. I just tested it out with the screen saver only activated and it wakes fine, and then set it to turn the display off after 5 minutes, and it wakes up fine if I try then. The issue is when it has been idle for the night or longer. I am running this machine through a KVM, so I'm not sure if that may have something to do with it. You can see from the output here that the mouse seems to be getting discovered all over every time I switch back to this machine.
[Code].....
This isn't a major issue, but it is very annoying if I want to switch over to this machine to get a few things done and switch back. Also, if I am waiting at the blank screen with the mouse, I can still press ctrl + F2 to access the terminal immediately, so the computer is functional but the GUI seems to be delayed in coming back.
View 4 Replies
View Related
Jun 3, 2015
I am running Debian 8 with the Xfce Desktop Environment.
I was unhappy with the lock screen on Xfce so I removed xscreensaver and wrote a short custom locking script, which basically involves using i3lock along with some additional commands to make things pretty. I was able to change the default locking behaviour by modifying /usr/bin/xflock4 to run my_lock.sh.
Unfortunately, no lock screen appears whenever I suspend ie after waking the computer from suspension I don't need to type a password in. I would like to force Xfce to lock the screen with my_lock.sh before actually suspending, but I don't know how to do this.
I know that Xfce runs Code: Select allxfce4-session-logout -s when suspending, but xfce4-session-logout is a binary file which I cannot edit.
View 3 Replies
View Related
Jun 1, 2010
After succesfully installing Ubuntu 10.4 x32 and rebooting pc hangs on black screen with a flashing white dot in the top left corner of my screen, i've tried installing it twice with the same results.
my setup is: Asus p5q-e,
4 gig of corsair dual ram,
ati 4850 graphics,
onboard audio.
ahci mode
win 7 installed on intel ssd, and xp on a samsung 320 gb sata 2,
i had this configuration running fine for 2 months without boot loaders,
on pc start up i choose from which hdd to boot from.
i installed ubuntu on the samsung drive where it was recognised fine, wiped it all and installed automatically.
pls let me know if there is anything i missed, and advice if possible in what to do.
thanks
kannanni
View 2 Replies
View Related
May 3, 2010
Just installed a clean version of 10.04 onto my Sony VAIO with an ATI Radeon Mobility x700 video card.Whilst using 9.10 KK I was getting low resolution but the dual monitors worked totally fine.Which I use to connect to my TV via a RGB/PC Cord.Since upgrading to 10.04 the resolution is awesome BUT when I merge both monitors the laptop goes mental and shows a white/whitish screen.If I use have both monitors side by side its OK but then I cant run xbmc to show movies. I'm stuck with making the TV my main monitor, which is a pain.Why is the laptop going white after merging screens? Does anybody have any ideas?
View 2 Replies
View Related
Jan 5, 2010
All I want to do is to be able to shut the lid on my laptop, have it go into suspend like it already does, but upon opening it again, successfully start up again. It'll sleep just fine, but if you close the lid and try to open it again later, the lights will indicate it is starting up, but the screen won't initialize, and I am left with a blank, black screen.I've tried a line of code to enter into my menu.lst file, and it seemed like it should work, but it borked my computer and I had to manually reinstate the line of code it had before.
View 9 Replies
View Related
