I have Ubuntu (command line only) installed as a part of XBMC Live installation. My disk is 1TB that's currently partitioned like this:
10GB root
2GB swap
950GB media
Is there a way to split the existing 950GB partition into two (900GB and 50GB) without altering or moving the data that's currently on it?
I have an external 320gb Hard drive. My plan was to have 250gb for My Documents of mainly music, films and word documents. And 50gb set aside for ubuntu, in a separate partition.To do this I need to partition the 50gb partition as ext4? then add a swap file of how big? Do i even need a swap space if I have 4gb of physical RAM?
View 4 Replies View RelatedI'm relatively new to ubuntu. I want to run ubuntu alongside my windows partition. I have shrunk the volume that leaves me 50 gb of free space for ubuntu. Will the system automatically set the system and mount volume sizes? If not can I have some tips on manually using the 50 gb to set it up.
View 1 Replies View RelatedI have a PC that has 10.04 installed and no other operating system. The 1 TB hard disk has two partitions:
* 940 GB NTFS for data storage
* 50GB ext4 (which has 10 GB extended and 10 GB sawp)
The system has become sluggish and slow and browsers and so on often "hang" for a few seconds prior to executing. There is an epiphany dependency problem that I cannot solve.
My questions are:
1. Is it possible to do a clean install on the 50GB partition from a live CD?
2. Is it better to do this than upgrade to 10.10 and thence to 11.04? [When I ungraded like this in the past, I had problems, so I would prefer a clean install].
3. If it is possible to do a clean install on the 50GB partition, should I reformat the partition and if so, can I do that from the live CD?
I want to install from scratch or change a current system, which ever works best to have the following partitions: I have a 160GB HD and want a 50GB root partition 3 GB swap and the rest for home. When i go throught the guided partitioning process the largest i can get is 8GB. The root partition is the bootable partition correct?
View 2 Replies View RelatedHow would I combine a empty partition with my existing partition? A reinstall is just an option and I need more disk space
View 2 Replies View RelatedHow do I split my partition in 2?
View 2 Replies View RelatedIs there any way to split partition, in which my ubuntu 11.04 is.I don't wanna loose data, but I dont wanna reinstall it too.P.S. Now I have 750gb HDD, I want to split off 100gb~ for dual boot win7
View 9 Replies View RelatedWhen the system was setup, it was setup with one physical LVM, and one logical LVM (aside from the swap and boot) as the "default" partitioning. Now I want to make /var sit on it's own partition.
1. I booted with a Live CD, and reduced the size of the LogVol00 from 1.5T to 100G (I plan to split out more than just /var...but I'll start with /var)
2. I created a new logical LogVol02 for 100G Ext 3 FS (step 1 and 2 with LVM GUI Utility) which seems to have worked just fine.
3. I did the following (from the LIVE CD) :
[Code]...
Right now, if I had to reinstall and define each partition at install time, it wouldn't be a problem, the system hasn't been fully configured...but the point of the exercise was to work with LVM (i've never used it before, I always used just fdisk only) and learn to split off directories into their own parition.
Server have extended partition size around 490 GB. I want to spilt the extended partition to each two partition(ut0 & ut1) size 100 GB. How to split the extended partition in Redhat linux 5?
View 3 Replies View Relatedi tried installing windows 7 on a partition on my laptop but i'm getting this message:"setup was unable to create a new partition or locate an existing system partition "i tried googling and found that it has something to do with the number of partitions:my hard disk layout right now:
p1 ext4 21gb /home
p2 ntfs 64gb
p3 ext3 18gb ubuntu installation
[code]....
i've recently installed 11.04 and am giving banshee a shot. it seems pretty good although has crashed a few times. but when i import my music folders (about 900GB, 175,000 items .. and growing..) it takes days. that's not such a big problem because it only needs to be indexed once, i assume, ... but the UI is very slow now - so that clicking on an album can take several seconds to bring up the tracklist. also typing into the search box there is a large delay before the matches are shown. is this just to be expected for such a large db? i recall i had google desktop indexing and returning results almost immediately back on winblows.. other ones i have tried include rhythmbox , amarok, songbird .. but have not found any of them to be stable and simple enough to my liking.
can anyone recommend a good player , my essential requirement is a fast and efficient indexing - with tag support would be grand, but just based on filenames is ok too. drag and drop into a play queue like rhthmbox had would be nice.
I want to partition an existing partion(to get room for another partition) without loosing data (without formatting)
View 2 Replies View RelatedTrying to clean install 11.2 dual boot with Win xp already installed. How do I create a new home partition, don't want to preserve the existing home partition from a previous attempt. DVD installation and automatic config keeps saving the thing.
View 5 Replies View RelatedI sudo apt-get uninstalled a bunch of stuff I shouldn't have. Now my Ubuntu Partition doesn't boot up correctly, something about the graphic system, video system, etc. all being unconfigured. (I'll get the exact error later.) All I can use is the command line.can I install Ubuntu over my old Ubuntu partition without messing up rebooting/GRUB and all that?
View 3 Replies View RelatedI am running ubuntu 10.10 on a drive with 3 partitions. 1 windows and 2 ubuntu partitions.
The ubuntu that I am running right now is on a partition that is too small. I need to either expand it to include the other ubuntu partition or reinstall 10.10 and copy my existing partition to it. Can this be down?
I have this version working the way I like it and have tried 11.04 and am holding of for now. Still the fact remains that my working copy is on a partition that is really too small I only have 2 gig free space on a drive that is a 500gig.
What I am trying to accomplish, is have 3 partitions on my hard drive. The first one being Windows 35GB. The second being 15GB Ubuntu. The remaining just being backups. I have set up partitions for this, but I have failed thus far in finding a way to install to the Ubuntu partition I have created. Should I have left that space unallocated? How would I make this work?
View 1 Replies View RelatedYesterday, I deleted/reformatted one of my internal hard drive which had two partitions. Now everytime I log-in, Ubuntu tries to mount the two partitions that no longer exist. The only way I can resolve this is by pressing "S" twice while trying to log in to skip the auto-mounting process. Is this problem in the grub or should I just disable auto-mounting?
Auto-mounting was enabled automatically when I installed ubuntu in May, so I have no idea how to disable it or how to mount drives that are not automatically mounted at log in.
I can't boot to Windows XP after recently installing Ubuntu (Ubuntu boots fine). The error that comes up (straight after selecting XP) is that it can't find "system32hall.dll".
Reason for the problem: Ubuntu is looking at the old, corrupted version of XP that I have. The 'real' version is on another partition, for reasons too lengthy to explain. Note: neither of these partitions were touched when installing Ubuntu - I placed Ubuntu in the pre-existing partitions I had setup when installing previous versions of Linux (last was Mandrake 8.)
Now, I can understand why it is looking at the old version, because it is on the first partition of the hard drive, "dev/sda1", the new version is on "dev/sda3" (nomenclature according to Ubuntu, obviously).
Question: How do I point the config file to sda3? I have tried setting root to "hd0,3" and "hd3,1" with no luck. Original code is below:
Code:
### BEGIN /etc/grub.d/30_os-prober ###
menuentry "Microsoft Windows XP Professional (on /dev/sda1)" {
insmod ntfs
set root=(hd0,1)
[Code]....
I have been using Ubuntu 9.10 on my Macbook Pro for a couple of weeks now and I want to make the jump to Ubuntu on the iMac. However I have some issues and questions:
1) iPhone support: this is coming in 10 right?
2) Wireless keyboard, does this work?
3) Second monitors, does this work?
4) I presume it is best to keep the existing OSX on it and partition it and use Ubuntu as the default, keep OSX for firmware updates and the like.
I recently upgraded to ubuntu 10.04 from 9.10. I now have grub 1.98 and my problem is that when i select windows xp from grub it just goes to a black screen with a white flashing line. If i boot ubuntu it does the same thing for about five seconds then ubuntu loads right up. I hit e on windows xp in grub and this is what came up.
insmod ntfs
set root='(hd0,2)'
search --no-floppy --fs--uuid --set 7a841c73841c33db
drivemap -s _hd0) ${root}
chainloader +1
I then hit c on windows xp and entered each line on its own and the only error was this. error unknown argument '--fs-uuid'
I'm having a installation problem. I am trying to install Ubuntu on my laptop that is currently running Windows 7, and win7 is needed for use in projecting songs in our church services. The HD is a 500 gb already partitioned with the max. of 4 partitions. Win7 files are on the sda2 partition and my data files are on sda3. Sda1 and sda4 are smaller partitions, one is 3 gb's the other is 1 gb.
My question is, what is the best set up for me to install Ubuntu? I can't create an extended partition since I already have 4 partitions. I like my current partition set up as far as windows goes, but I would really like to get Ubuntu installed. I'm fairly new with Ubuntu, I like what I've seen so far. I had it installed with wubi in windows XP on a laptop that I just sold, and I've upgraded to the windows 7 laptop now, and I'm stuck!
My Laptop is Dell Inspiron 1525 with Dual boot Windows vista as well as Linux mint. I was trying to install Ubuntu over Linux Mint, but it is not detecting the existing partitions asking me to go ahead and edit the partitions manually (which I am not familiar with). Earlier when I was installing Linux Mint or SUSE, it was detecting the existing partitions and could install easily. Currently I am sure how to go about, but I would like to install Ubuntu badly.
View 1 Replies View RelatedI have a doubt with how to add un-used space in my RHEL 4.0(linux) server to a existing partition. I will explain the scenario:-I have some 220 GB space on my linux server as shown by the command as below-
[root@JispNewDB ~]# fdisk -l
Disk /dev/cciss/c0d0: 733.9 GB, 733909245952 bytes
255 heads, 63 sectors/track, 89226 cylinders
[code]...
I am trying to replace an existing ubuntu installation with the current debian testing release. But when it comes to select partitions to install on none of the existing partitions is visible. I only see my SATA hard drive empty. The existing installation of Windows is still bootable and fdisk as well as cfdisk correctly recognize the partition table while parted (which I assume is used by the installation process; all tools run from a live cd) is not:
[root@localhost liveuser]# cfdisk /dev/sda
cfdisk (util-linux-ng 2.18)
Disk Drive: /dev/sda
Size: 160041885696 bytes, 160.0 GB
Heads: 255 Sectors per Track: 63 Cylinders: 19457 .....
[root@localhost liveuser]# parted /dev/sda unit s print
Error: Can't have overlapping partitions.
I am not sure what parted's error message means. I can hardly imagine that it complains about the logical partitions with in the extended one. The reasons for the trouble might come frome the fact that sda4 is marked as primary partition (see cfdisk output). If this is the case, how can I repair this?
how to create a new partition from the existing system I am using ubuntu 9.04 as Host system and work on LFS. The command given in LFS book throws i.e
khirod@khirod:/dev$ mke2fs -jv /dev/sda5
mke2fs 1.41.4 (27-Jan-2009)
/dev/sda5 is mounted; will not make a filesystem here!
I have a 120GB HD that I installed my linux-mint distro to and have been using for a while now, maybe a year or so. However, it has been running great so I haven't paid much attention to the actual install. Recently, I have been getting notifications of very low disk space remaining. I ran gparted and discovered that there is a very large extended partition that doesn't appear to be mounted. Can I just boot into a terminal, set a mount point and be on my way or will this hurt my existing installation? What is the safest set of steps to mount this partition since it looks to be the swap space as well?
Code:
Here is output of fdisk for the drive:
Disk /dev/sdb: 122.9 GB, 122942324736 bytes
255 heads, 63 sectors/track, 14946 cylinders
[Code]....
I have a 500 GB dual boot debian jessie + windows laptop; I intend to erase windows completely and add the extra space to my existing /home partition. What is the best way of doing it without harming data in my present /home partition?
View 12 Replies View RelatedIn the process of preupgrading to FC12. Towards the end of the process I get a warning that my /boot partition isn't big enough (12 recommends minimum of 300Mb).
My disks:
[root@fatbeast boot]# df -h
Filesystem Size Used Avail Use% Mounted on
/dev/mapper/vg_fatbeast-lv_root
35G 6.6G 28G 20% /
/dev/sda1 194M 176M 8.4M 96% /boot
/dev/mapper/vg_fatbeast-LogVol02
29G 25G 3.2G 89% /home
tmpfs 1.9G 676K 1.9G 1% /dev/shm
/dev/sdb 7.5G 319M w7.2G 5% /media/CDF2-6BE2
[root@fatbeast boot]#
Is there a tool I can use to resize my existing partitions WITHOUT data loss? I've been using gparted up to now for sorting partition stuff, does that maintain data when resizing (assuming I run from a boot CD or USB rather than a running system)?
If I have a partition like /dev/hd1 that is unencrypted and want it to be encrypted, but want to keep everything currently in that partition, how can I do that?
View 2 Replies View Related