I want to install from scratch or change a current system, which ever works best to have the following partitions: I have a 160GB HD and want a 50GB root partition 3 GB swap and the rest for home. When i go throught the guided partitioning process the largest i can get is 8GB. The root partition is the bootable partition correct?
View 2 Replies1. Pentium 4 with 1.8 gh 2. 512 ram 3. 15 gb hard disk. installation specially regarding partition option (eg.. how much alloted should be for swap/ root/home etc)
View 1 Replies View Relatedwant to install 11.2 version. my machine config is as belows. pentium 4 with 1.8 gz, 512 ram and 15 gb hard disk. i want to know what should be the partition size specially for swap, root ,home etc.and what version i.e genome or kde should i install.
View 1 Replies View RelatedI have an external 320gb Hard drive. My plan was to have 250gb for My Documents of mainly music, films and word documents. And 50gb set aside for ubuntu, in a separate partition.To do this I need to partition the 50gb partition as ext4? then add a swap file of how big? Do i even need a swap space if I have 4gb of physical RAM?
View 4 Replies View RelatedI have a PC that has 10.04 installed and no other operating system. The 1 TB hard disk has two partitions:
* 940 GB NTFS for data storage
* 50GB ext4 (which has 10 GB extended and 10 GB sawp)
The system has become sluggish and slow and browsers and so on often "hang" for a few seconds prior to executing. There is an epiphany dependency problem that I cannot solve.
My questions are:
1. Is it possible to do a clean install on the 50GB partition from a live CD?
2. Is it better to do this than upgrade to 10.10 and thence to 11.04? [When I ungraded like this in the past, I had problems, so I would prefer a clean install].
3. If it is possible to do a clean install on the 50GB partition, should I reformat the partition and if so, can I do that from the live CD?
I am installing Ubuntu on the same hard drive as Windows 7. The partitions of Windows 7 have already occupied the left part of the hard drive. From left to right, the Windows partitions are one partition for Windows booting, one for Windows OS and software installation, and one for data which is planned to mount on Ubuntu. I was wondering how to arrange the order of partitions of root, home and swap, i.e. which is on the left just besides one Windows partition, which is in the middle and which is on the far right?
View 1 Replies View RelatedIs there a command that tells you what the partitions are fdisk -l shows partitions I want to know which is root swap home etc, Labels the partitions?
View 6 Replies View RelatedI've set a side 80GB on a separate partition, I have 4GB of RAM. I know it will ask me to set /home /root and /swap. How much should I set each one to be with my partition size and RAM.
View 2 Replies View RelatedLooks like I missed defining a /home dir during installation. It's been a while I have a spare partition now that I'd really love to use. Can you specify this still, or is it only allowed during an install?
View 3 Replies View RelatedOk. I have a media server running debian amd64. when I installed it I made separate partitions for root (/) home (/home) var (/var) and swap.
I'm adding some new hardware (mobo and ram) and want to reinstall debian. I would like to keep my home and var partitions intact and just reinstall everything in root (/) partition.
I'm unsure of how to do this during the installation. Do i need to format? how do I tell it to use the /var and /home partitions?
I have finally been convinced to partition my 500GB hard drive from a two partition setup with root and swap to a three partition setup with root, swap, and home. I found a nice tutorial about how to do this, but here is my question:
A) How much space do I leave for the root partition and the home partition?
I'm relatively new to ubuntu. I want to run ubuntu alongside my windows partition. I have shrunk the volume that leaves me 50 gb of free space for ubuntu. Will the system automatically set the system and mount volume sizes? If not can I have some tips on manually using the 50 gb to set it up.
View 1 Replies View RelatedI have Ubuntu (command line only) installed as a part of XBMC Live installation. My disk is 1TB that's currently partitioned like this:
10GB root
2GB swap
950GB media
Is there a way to split the existing 950GB partition into two (900GB and 50GB) without altering or moving the data that's currently on it?
I am having issues with Grub 2 after installing Debian 7.8.0.The computer is a HP Pavilion 500-307nb. I made the original harddrive /dev/sdb and inserted a Samsung Evo 840 as /dev/sda. From the original hard drive (/dev/sdb), I wiped the windows partition, but left all other partitions unchanged (in case I would ever want to recover the desktop to its original state). I replaced the wiped windows partition with a swap partition and an LVM partition.These are my hard drive partitions:
/dev/sda (Samsung Evo 840)
Number Start End Size File system Name Flags
1 1049kB 3146kB 2097kB primary bios_grub
2 3146kB 944MB 941MB ext4 boot
3 944MB 94.4GB 93.4GB host lvm
4 94.4GB 1000GB 906GB guests lvm
[code]....
The partition /dev/sda3 has 2 logical volumes with filesystem ext4 that I mount to / and /home.The partition /dev/sda2 is mounted to /boot..When I install like this, Debian installs fine, however Grub2 is not installed correctly.Debian installs grub-pc which seems not able to boot the gpt partition. So I boot the Debian CD in rescue mode and execute:
mount /dev/sda2 /boot
aptitude purge grub-pc
aptitude -y install grub-efi
After rebooting, I come in the grub rescue shell, which says: error: no such device: 986f2176--4a4b-4222-83b9-8636a034b3c7.
When I then enter in the grub rescue shell:
set boot=(hd0,gpt2)
set prefix=(hd0,gpt2)/grub
insmod normal
normal
Grub and Debian start up correctly.why can Grub not start up automatically correctly? Where does the UUID 986f2176--4a4b-4222-83b9-8636a034b3c7 come from? I have reinstalled Grub several times, I have reinstall Debian several times, I have even wiped all partitions from /dev/sda and recreated a new gpt table with parted and manually set the partitions in parted. Still on each reinstallation, Grub fails because it cannot find exactly the same UUID. Since this UUID is always the same, it must be stored somewhere, but it cannot be the partitions, I have wiped them and the partition table several times.
I did though a firmware update of the Samsung Evo 840 before reinstallation, could this be a cause?Also the problem is not in grub.cfg. Grub starts correctly if I enter the commands above in the grub rescue screen and the UUID value does not appear there.
I have a brand new thinkpad X301 with 4GB of RAM and thinking of getting fedora 11 on it. The plan is to have it triple boot with vista/seven and hopefully OSx86. I am aware of the 4 primary partitions limit on an MBR disk. I was thinking of having a swap file instead of swap partition and not creating a boot partition as well. If I install the boot loader(GRUB?) on the root partition will I be able to boot it without any problems by using vista's boot loader?
Or Maybe I should install GRUB on the MBR and add all the other operating systems on it? Does anyone have any objections for not creating a swap partition or a boot partition? When comes to desktop environment I've been using KDE in the past, is there any major advantage of using Gnome over it? KDE seems to look really nice on fedora where Gnome is maybe more stable?
I have the partition like below. Now i want merge the /home partition into /dev/sda1 partition .
[Code]...
l my root (/) partition has 11G free space and my /home is only left with 5g around and /usr has around 8g in my fedora 13 .So is there any possibility to "resize" the root partition and add it to home partition bcoz i see the opposite in the threads(resize home to add space to root).My home has nothin more than a movie which is 700MB and i've installed some new application yesterday. But it shows half of the space is almost used!!!
/dev/sda7 12G 925M 11G 9% /
tmpfs 497M 2.6M 495M 1% /dev/shm
/dev/sda9 12G 5.0G 6.0G 46% /home
/dev/sda8 12G 4.1G 7.3G 36% /usr
My total filesystem capacity:39.9 GB(used 4.2GB,available:35.7 GB)
Currently,i have only single partition.
i wanna make again a new partition from the single existing partition where root(/) folder stored.
my aim is to separate the home folder from the existing partition to the new partition.
So, I wan't completely paying attention to the default partitioning that Red Hat Enterprise 6 does.
I was setting up a base image for VMWare and the disk was 200GB, but for some reason the default is for about 40% to go to the root partition and then the rest of it to go to /home (this doesn't include the 2GB or so in swap).
Is there an easy way to recover the space under /home and expand the root partition? Assume there are no user accounts created.
What formula does the installer use to decide the default sizes of /, swap, and home?
View 2 Replies View RelatedDoes one need to Check the Swap filesystem, from time to time
View 4 Replies View RelatedI'm installing a new SSD this upcoming weekend. My thought was to go easy on it so it lasts longer by putting my swap files on a mechanical drive instead of the SSD. I don't - however - want to waste space for swap files. It would be nice if I could use the same 6GB FAT32 partition for swap files for both Windows 7 and Ubuntu. Is this possible? It might not even be necessary though, I have enough RAM that I rarely use the swap file at all (I've even considered going without swap all together), so it probably won't pose a huge load to the drive.
View 9 Replies View RelatedI have Ubuntu 10.04 installed. When I run Ubuntu 10.04 LiveCD and I start GParted I see that there is a "key" on my swap partition marking it as locked I guess. When I right click, I cannot select "Delete" option. What does this mean? What if I want to rearange my partitions sizes including swap partition for whatever reason?
View 1 Replies View RelatedI'm using ubuntu 10.04 and it seems that I forgot to set up a swap partition when I installed my system. So, I can't install hibernate, and I don't think I have any virtual memory any more.
I know that I can always set up a swap file to play the same role, but since swap file is not contiguously stored on hard disk, the performance is expected to be worse than a swap partition.
So, how can I add a swap partition and make my system boot with it every time from now on? I have unused space on my hard disk, and re-installation is NOT an option.
I am using a Dell Inspiron 580 that I recently recieved as a gift. I wouldn't normally purchase a Dell, but I have no money and it my old computer was WAY past it's prime. After going through a miniature nightmare I now wonder how to create swap space for my ubuntu installation. I am running 10.04, 64 bit. I am having no problems, but I have no swap space. My computer is a new -Intel i3- with 6GB of ram; so I assumed I could worry about getting it installed, then set a swap file later. As I said, it runs well, but i don't feel comfortable with ZERO swap space.
When I installed Ubuntu I already had a problem because Dell had included 2 special partitions that are diagnostic and recovery. This didn't surprise me, but I want to make my system backup less than 100GB, so I shrank the "c:" partition to 100Gb and made the free space "storage":NTFS partition. After backing everything up (before messing with the partitions), I installed Ubuntu. Since I had created the backup that Dell asked me to (the very first time I turned the PC on) as well as my own system image I wasn't concerned.
Using GParted Boot disk I deleted the Dell "Recovery" partition and marked the "C:" drive (COS)) as active. I used a Windows 7 install disk to "repair" the bootmgr problem. Had to run "repair" twice, but it worked.
My question now is: why didn't Ubuntu installation say anything about a swap partition until I had already set up my partitions? I could easily give up a gig or two for swap space but I cannot make a swap partition unless I delete the Dell diagnostic partition (NOT the "recovery" partition; the other hidden one). I don't mind deleting the "recovery" partition because it is backed up, but I would prefer not to delete the "diagnostic/utility" partition, just in case. The 40MB is crap anyway.
It hadn't occurred to me that I would have trouble making swap space. I am used to windows (I am dual booting with GRUB BTW, if that matters) and the swap FILE doesn't need it's own partition. I understand why a separate partition would be better, but unless I can somehow create a logical/extended partition for swap, I need to know what else I can do.
I believe Ubuntu is a better system for many reasons, but little things like this do puzzle me. I am no engineer, or software designer, but I don't understand why I wasn't given an option, such as: You cannot make another primary partition; would you like to use a virtual disk/file as your swap space?"
I have a dual-boot Vaio, with Windows Vista (for WOW only,I promise!) and Ubuntu 10.10. I have a HDD with 250 GB, where 170GB is for Ubuntu and around 40 GB for Windows and a Swap that is 6 GB. This Swap seems a little too big, so how o I edit its size (make it smaller like 3GB) and then add the "free space"-leftovers to the big Ubuntu partition ( / )?
View 4 Replies View Relatedi have instaled ubuntu 11.04 wubi on my pc with windows 7. i installed and everything was going ok i navigate on ubuntu already. but the problems star here i went on my ubuntu to the partition section and i format my windows partion to be the home partion and changed the nfts to ext, i did the upgrades but i forgot that theyr running yet and i restart my computer when it boot again it gaves me an error:
try (0,0) : nfts5 : wubildr
try (0,1) : ext2 :
and the windows7 says that i have to instal again. so i went to another pc and i made a cd boot and a pen boot. i burned the iso (downloaded from the ubuntu oficial site the 11.04 32 bit version) image to the cd and pen drive prperly, i adjust my boot options to star from usb or cd rom and nothing im struck.
I was wondering what the best way is to partition multiple distros to share one home partition.
View 8 Replies View RelatedIs there a way to encrypt your swap partition after installation?
View 3 Replies View RelatedRAM of the machine is 4M. I never see the swap partition has been used via system monitor. So can I safely delete the swap partition?
View 7 Replies View Related