I have a 500 GB dual boot debian jessie + windows laptop; I intend to erase windows completely and add the extra space to my existing /home partition. What is the best way of doing it without harming data in my present /home partition?
View 12 Replies
Trying to clean install 11.2 dual boot with Win xp already installed. How do I create a new home partition, don't want to preserve the existing home partition from a previous attempt. DVD installation and automatic config keeps saving the thing.
View 5 Replies View RelatedBeen digging around and not finding anything that quite works.
Background: I had an existing 10.10 install and 10.04 on another partition. When I installed the 10.04 I told it to use the existing /home partition which is also being used by the 10.10 install. All good, both users have directories with all their data in the same /home partition.
Issue: So, as the 10.04 was 32bit (experimenting but another story) I decided I would replace with 10.04 64bit. All went well except when I did the manual partitioning I screwed up and instead of setting the existing /home partition to 'use but don't format' - which I think is what I must have done last time - I left it as 'don't use and don't format'. So, obviously, now the new 10.04 install has its /home inside /, which I don't want. I want it on the existing /home partition as it was with the previous 10.04 install.
Question(s): Is there any simple(ish) way of doing this without a reinstall? Not a major problem as I have only just installed and can do it again without losing anything but time, but I would like to figure out a way to do it without if possible.I want to essentially move the /home/user directory (rather than the /home) and make it /media/home/user inside the existing partition. Seems easy enough on the surface but becomes involved as I investigate.Ubuntu 10.04 minimal install with Xfce DE.
I am trying to replace an existing ubuntu installation with the current debian testing release. But when it comes to select partitions to install on none of the existing partitions is visible. I only see my SATA hard drive empty. The existing installation of Windows is still bootable and fdisk as well as cfdisk correctly recognize the partition table while parted (which I assume is used by the installation process; all tools run from a live cd) is not:
[root@localhost liveuser]# cfdisk /dev/sda
cfdisk (util-linux-ng 2.18)
Disk Drive: /dev/sda
Size: 160041885696 bytes, 160.0 GB
Heads: 255 Sectors per Track: 63 Cylinders: 19457 .....
[root@localhost liveuser]# parted /dev/sda unit s print
Error: Can't have overlapping partitions.
I am not sure what parted's error message means. I can hardly imagine that it complains about the logical partitions with in the extended one. The reasons for the trouble might come frome the fact that sda4 is marked as primary partition (see cfdisk output). If this is the case, how can I repair this?
I have an issue with Gparted v0.19.0 (Jessie) which has replaced v0.12.1 (Wheezy) which works fine. I had hoped to ask this question in Gparted's own forum, but after three weeks and multiple attempts no-one has approved my account there.
Unfortunately, my existing partition structure (on two different laptops) seems to be invisible to the new version of Gparted. Since parted seems to be used by the Debian installer, the Jessie installer cannot install on these machines without repartitioning the entire disk. That means that on such machines, the only option is to wipe everything or install Wheezy, then edit sources.list to upgrade to Jessie.
Both Gparted v0.19.0 and the Jessie installer report the entire hard disk as a single Fat16 partition,The same partitions which are invisible to Gparted appear as normal in the Places sidebar, of either Thunar or the PCManFM file manager. They can be mounted and used, seemingly without issue (I have experienced the same problem under Ubuntu/Lubuntu 15.10). Below, is the shell output of fdisk, which can see the partition structure and parted, which cannot:
Code: Select all$ sudo fdisk -lu
Disk /dev/sda: 74.5 GiB, 80026361856 bytes, 156301488 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
[code]...
extended sata partition shrunk at 15 partition limit, how to re-enlarge i hit the 15 partition limit, forgetting it now exists for sata drives, thinking i would add more. upon creation of the 15th, it squished the end of the extended partition to meet the last logical partition, leaving a large unallocated portion after the extended partition, which seemingly nothing can be done with, just sat being wasted space. i have since deleted a few of those partitions, but so far have still failed to find a way to recoup the unallocated space back into the extended partition.
[URL]
if necessary, i'll do it the painful long winded way of backing up and starting the extended partition again from scratch, but i really rather wouldnt have to do that. i'm sure there must be a way of telling the extended partition to once again reach the end of the drive.
How is the best way to rename an existing user and his home directory under Debian Lenny? BTW I'd like to have the same settings like Desktop Icons, Bookmarks etc.
View 5 Replies View RelatedI've installed fedora on my PC by reducing the existing NTFS partition and installing Fedora on free space at the end of the disk. Now I'd like tho enlarge fedora's partition. How can I do this? If I just move the partition back in disk, can I boot normally on fedora?
View 14 Replies View RelatedOk. I have a media server running debian amd64. when I installed it I made separate partitions for root (/) home (/home) var (/var) and swap.
I'm adding some new hardware (mobo and ram) and want to reinstall debian. I would like to keep my home and var partitions intact and just reinstall everything in root (/) partition.
I'm unsure of how to do this during the installation. Do i need to format? how do I tell it to use the /var and /home partitions?
I want to increase the size of my Linux partition (yellow and highlighted in image), which is situated in an extended partition, along with my biggest partition.
When I try to select the options from any partitioning software (EASUS, Paragon, Gparted) the option to resize is not available (or can't enlarge).
For example in the Paragon Hard Disk Manager, I can't add free space before the partition, even if I first shrink the "G:" partition, then try to enlarge the one with Linux.
Do you know what's happening here? Why am I not allowed to resize the partition?
I am trying to grow my array to make full use of my drives. I have a raid 6 using mdadm on my home server. The array used to consist of 6 1.5TB drives when it was created. Since then I've been replacing the 1.5TB drives with new 2TB drives. And now I have replaced the last 2 drives.
When I added the first 3 disks I did not use the whole disk for the raid partition but rather made it the same size as the 1.5 partitions. As it turns out this may have been a bad idea. (But it gave me another 3 partitions of 500GB that I turned into 1 disk using mhddfs.)
Now I'm trying to grow the array. I've been testing in a virtual enviroment on how to do it but I cannot find another method than this :
1) fail 1 disk.
2) re-partition the disk with the size of the whole disk.
3) re-add the drive as a spare.
4) start the now degraded array to let it resync.
5) wait quite a while. (aprox 5 hours)
6) start again from step 1 for the other disks.
7) use mdadm with grow command to enlarge the array
use resize2fs to fill array to max size
Now although since this is a raid 6, I keep some redundancy but I still worry about degrading the array so manny times and rebuilding the whole thing. I mean I read the thing out 3 or 4 times over doing this.
Having read several threads and received excellent previous advice there are just a couple of points I want to check please before proceeding on laptop. I want to upgrade to 11.4 from 11.2. My disk setup is as follows:-
Disk /dev/sda: 120.0 GB, 120034123776 bytes
240 heads, 63 sectors/track, 15505 cylinders
Units = cylinders of 15120 * 512 = 7741440 bytes
Disk identifier: 0x462d462c
[Code]..
If I select existing /home root and swap partitions, format root but prevent formatting of /home and use a different user ID I believe that will leave my existing data intact and will allow me to trial new os. Is this correct approach? If all goes well and when I have new system working correctly, what is best way make old user id date accessible. Can I simply create my old id on new system and will that allow me to access data when I log on with that id?
Second question; at present I have the ability to boot to openSUSE, OS/2 and windoze. (It used to be done entirely by Boot Manager but during my last Linux installation I messed this up a bit so now machine boots to grub and this offers all three operating systems but chain loads Boot Manager if I select OS/2)
When I do the new installation what should I select to retain this setup so that I still have access to windoze and OS/2 but when selecting linux have new 11.4 system run.
I have a problem that Google didn't give me a workable solution so I'm posting my question here, hoping that someone has an idea.On a virtual server (VMWare) running Debian 5 I have a disk of 15Gb.
Can anyone tell me if this is possible? I've been playing around with GParted but unsuccessfully. The other option is to 'move' the whole server to a new (to create) virtual server that uses LVM. Any ideas?
i tried installing windows 7 on a partition on my laptop but i'm getting this message:"setup was unable to create a new partition or locate an existing system partition "i tried googling and found that it has something to do with the number of partitions:my hard disk layout right now:
p1 ext4 21gb /home
p2 ntfs 64gb
p3 ext3 18gb ubuntu installation
[code]....
My debian 5 is up and running smoothly and act as file-server in the middle of windows network jungle using samba the only problem is, after backup an external hdd (213 GB) to my /home partition, I end up with message say that I'm running out free space. Fyi my debian installed on 1TB SATA disk, and I separate my /home partition from system what happen to my free space ? here is screenshot of my disk, using disk usage analyzer: is there is a way to get my space back or something missing on my setup.or I have to reinstall my debian and use LVM when partitioning my disk?
View 8 Replies View RelatedWhat I am trying to accomplish, is have 3 partitions on my hard drive. The first one being Windows 35GB. The second being 15GB Ubuntu. The remaining just being backups. I have set up partitions for this, but I have failed thus far in finding a way to install to the Ubuntu partition I have created. Should I have left that space unallocated? How would I make this work?
View 1 Replies View RelatedI can't boot to Windows XP after recently installing Ubuntu (Ubuntu boots fine). The error that comes up (straight after selecting XP) is that it can't find "system32hall.dll".
Reason for the problem: Ubuntu is looking at the old, corrupted version of XP that I have. The 'real' version is on another partition, for reasons too lengthy to explain. Note: neither of these partitions were touched when installing Ubuntu - I placed Ubuntu in the pre-existing partitions I had setup when installing previous versions of Linux (last was Mandrake 8.)
Now, I can understand why it is looking at the old version, because it is on the first partition of the hard drive, "dev/sda1", the new version is on "dev/sda3" (nomenclature according to Ubuntu, obviously).
Question: How do I point the config file to sda3? I have tried setting root to "hd0,3" and "hd3,1" with no luck. Original code is below:
Code:
### BEGIN /etc/grub.d/30_os-prober ###
menuentry "Microsoft Windows XP Professional (on /dev/sda1)" {
insmod ntfs
set root=(hd0,1)
[Code]....
I recently upgraded to ubuntu 10.04 from 9.10. I now have grub 1.98 and my problem is that when i select windows xp from grub it just goes to a black screen with a white flashing line. If i boot ubuntu it does the same thing for about five seconds then ubuntu loads right up. I hit e on windows xp in grub and this is what came up.
insmod ntfs
set root='(hd0,2)'
search --no-floppy --fs--uuid --set 7a841c73841c33db
drivemap -s _hd0) ${root}
chainloader +1
I then hit c on windows xp and entered each line on its own and the only error was this. error unknown argument '--fs-uuid'
I'm having a installation problem. I am trying to install Ubuntu on my laptop that is currently running Windows 7, and win7 is needed for use in projecting songs in our church services. The HD is a 500 gb already partitioned with the max. of 4 partitions. Win7 files are on the sda2 partition and my data files are on sda3. Sda1 and sda4 are smaller partitions, one is 3 gb's the other is 1 gb.
My question is, what is the best set up for me to install Ubuntu? I can't create an extended partition since I already have 4 partitions. I like my current partition set up as far as windows goes, but I would really like to get Ubuntu installed. I'm fairly new with Ubuntu, I like what I've seen so far. I had it installed with wubi in windows XP on a laptop that I just sold, and I've upgraded to the windows 7 laptop now, and I'm stuck!
My Laptop is Dell Inspiron 1525 with Dual boot Windows vista as well as Linux mint. I was trying to install Ubuntu over Linux Mint, but it is not detecting the existing partitions asking me to go ahead and edit the partitions manually (which I am not familiar with). Earlier when I was installing Linux Mint or SUSE, it was detecting the existing partitions and could install easily. Currently I am sure how to go about, but I would like to install Ubuntu badly.
View 1 Replies View RelatedInstalled Ubuntu along with Debian on my Notebook and use Grub Manager to choose between them on startup. Since i like Debian now a lot (in past days it was a very hard system to handle, but there has been some progress i noticed), i have to change some things (want Debian as main system now) For Ubuntu i have: (was meant to be main system on Notebook) "/", "/home" and a "swap" partition, but since i am now going to use mainly Debian, i wanted to store my files all in the "/home"-folder of my extended Ubuntu partition (has much more space available) not in the "/home" folder of the Debian system. So i want both (Debian and Ubuntu) to use the same extended partition ("/home") which i created for Ubuntu to save their files like downloads, videos, and so on.
View 14 Replies View Relatedi have instaled ubuntu 11.04 wubi on my pc with windows 7. i installed and everything was going ok i navigate on ubuntu already. but the problems star here i went on my ubuntu to the partition section and i format my windows partion to be the home partion and changed the nfts to ext, i did the upgrades but i forgot that theyr running yet and i restart my computer when it boot again it gaves me an error:
try (0,0) : nfts5 : wubildr
try (0,1) : ext2 :
and the windows7 says that i have to instal again. so i went to another pc and i made a cd boot and a pen boot. i burned the iso (downloaded from the ubuntu oficial site the 11.04 32 bit version) image to the cd and pen drive prperly, i adjust my boot options to star from usb or cd rom and nothing im struck.
I was wondering what the best way is to partition multiple distros to share one home partition.
View 8 Replies View RelatedI want to install debian 6.0 on not-bootable debian 5, with lvm usage. Is any way to store "home" partition unformatted during standart installation process( I want to store information on "home" partition)?
View 2 Replies View RelatedI have been upgrading from 9.04 to 10.04. Now, I want to install 10.10 from the beginning without losing the data in my current partitions but when I run the Maverick installer it recognize my disk as a whole with no partitions. From another posts, I suspect that the problem is in the partition list because it seems to be a duplicate partition but don't know how to fix it. This is the fdisk output:
Code:
jgarcia@jgarcia-laptop:~$ sudo fdisk -lu /dev/sda
Disco /dev/sda: 250.1 GB, 250059350016 bytes
255 cabezas, 63 sectores/pista, 30401 cilindros, 488397168 sectores en total
Unidades = sectores de 1 * 512 = 512 bytes
[Code]....
Trying to refresh my diseased memory & tell me how to expand/enlarge trash folder?
View 6 Replies View RelatedI have my partitions as follows:- Windows 7- UbuntuIf I shrink the Windows partition will I be able to enlarge the Ubuntu root partition with gparted live cd?I know I can add space after Ubuntu but can it be done before it?
View 3 Replies View RelatedI was surprised not to find an existing thread on this anywhere, as I would expect this to be a common problem: I have the following partitions on my eee PC 100HE:
10GB Windows XP
5GB Linux Mint 8
5GB Ubuntu 9.10 NBR (awesome distro by the way!)
130GB Home partition shared by Linux Mint and Ubuntu NBR
2GB Swap partition shared by Linux Mint and Ubuntu NBR
I installed Ubuntu NBR after Mint. Immediately after install, the panel layout, menus and colour scheme were slightly messed up - presumeably because they had been "adopted" from the Mint settings in the home folder. I corrected them easily, but now I have the same problem in Mint. Is there any way I can get both distros to use the same /home folder, but different settings (i.e. the /home/username/. folders)? Can I get these settings folders put on a different partition for example?
And is this problem due only to the fact that these are 2 Ubuntu-based distros? Or will I have the same problem if/when I replace Mint with another distro, such as Fedora or Moblin?
How would I combine a empty partition with my existing partition? A reinstall is just an option and I need more disk space
View 2 Replies View RelatedI have moved /home to it's own partition and all is good. Testing is on sda1 and /home on sda2. However a bit later I wondered what would happen if I had to reinstall testing, would I then have /home on both partitions?
View 4 Replies View Related
