Debian Installation :: None Of Existing Partition Visible
Feb 14, 2011
I am trying to replace an existing ubuntu installation with the current debian testing release. But when it comes to select partitions to install on none of the existing partitions is visible. I only see my SATA hard drive empty. The existing installation of Windows is still bootable and fdisk as well as cfdisk correctly recognize the partition table while parted (which I assume is used by the installation process; all tools run from a live cd) is not:
[root@localhost liveuser]# cfdisk /dev/sda
cfdisk (util-linux-ng 2.18)
Disk Drive: /dev/sda
Size: 160041885696 bytes, 160.0 GB
Heads: 255 Sectors per Track: 63 Cylinders: 19457 .....
[root@localhost liveuser]# parted /dev/sda unit s print
Error: Can't have overlapping partitions.
I am not sure what parted's error message means. I can hardly imagine that it complains about the logical partitions with in the extended one. The reasons for the trouble might come frome the fact that sda4 is marked as primary partition (see cfdisk output). If this is the case, how can I repair this?
View 5 Replies
ADVERTISEMENT
Mar 19, 2016
I have a 500 GB dual boot debian jessie + windows laptop; I intend to erase windows completely and add the extra space to my existing /home partition. What is the best way of doing it without harming data in my present /home partition?
View 12 Replies
View Related
Jan 12, 2016
I have an issue with Gparted v0.19.0 (Jessie) which has replaced v0.12.1 (Wheezy) which works fine. I had hoped to ask this question in Gparted's own forum, but after three weeks and multiple attempts no-one has approved my account there.
Unfortunately, my existing partition structure (on two different laptops) seems to be invisible to the new version of Gparted. Since parted seems to be used by the Debian installer, the Jessie installer cannot install on these machines without repartitioning the entire disk. That means that on such machines, the only option is to wipe everything or install Wheezy, then edit sources.list to upgrade to Jessie.
Both Gparted v0.19.0 and the Jessie installer report the entire hard disk as a single Fat16 partition,The same partitions which are invisible to Gparted appear as normal in the Places sidebar, of either Thunar or the PCManFM file manager. They can be mounted and used, seemingly without issue (I have experienced the same problem under Ubuntu/Lubuntu 15.10). Below, is the shell output of fdisk, which can see the partition structure and parted, which cannot:
Code: Select all$ sudo fdisk -lu
Disk /dev/sda: 74.5 GiB, 80026361856 bytes, 156301488 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
[code]...
View 6 Replies
View Related
Sep 15, 2009
I have a problem that Google didn't give me a workable solution so I'm posting my question here, hoping that someone has an idea.On a virtual server (VMWare) running Debian 5 I have a disk of 15Gb.
Can anyone tell me if this is possible? I've been playing around with GParted but unsuccessfully. The other option is to 'move' the whole server to a new (to create) virtual server that uses LVM. Any ideas?
View 5 Replies
View Related
Apr 8, 2010
i tried installing windows 7 on a partition on my laptop but i'm getting this message:"setup was unable to create a new partition or locate an existing system partition "i tried googling and found that it has something to do with the number of partitions:my hard disk layout right now:
p1 ext4 21gb /home
p2 ntfs 64gb
p3 ext3 18gb ubuntu installation
[code]....
View 6 Replies
View Related
Jun 10, 2010
What I am trying to accomplish, is have 3 partitions on my hard drive. The first one being Windows 35GB. The second being 15GB Ubuntu. The remaining just being backups. I have set up partitions for this, but I have failed thus far in finding a way to install to the Ubuntu partition I have created. Should I have left that space unallocated? How would I make this work?
View 1 Replies
View Related
Mar 27, 2010
I can't boot to Windows XP after recently installing Ubuntu (Ubuntu boots fine). The error that comes up (straight after selecting XP) is that it can't find "system32hall.dll".
Reason for the problem: Ubuntu is looking at the old, corrupted version of XP that I have. The 'real' version is on another partition, for reasons too lengthy to explain. Note: neither of these partitions were touched when installing Ubuntu - I placed Ubuntu in the pre-existing partitions I had setup when installing previous versions of Linux (last was Mandrake 8.)
Now, I can understand why it is looking at the old version, because it is on the first partition of the hard drive, "dev/sda1", the new version is on "dev/sda3" (nomenclature according to Ubuntu, obviously).
Question: How do I point the config file to sda3? I have tried setting root to "hd0,3" and "hd3,1" with no luck. Original code is below:
Code:
### BEGIN /etc/grub.d/30_os-prober ###
menuentry "Microsoft Windows XP Professional (on /dev/sda1)" {
insmod ntfs
set root=(hd0,1)
[Code]....
View 3 Replies
View Related
Apr 14, 2010
I recently upgraded to ubuntu 10.04 from 9.10. I now have grub 1.98 and my problem is that when i select windows xp from grub it just goes to a black screen with a white flashing line. If i boot ubuntu it does the same thing for about five seconds then ubuntu loads right up. I hit e on windows xp in grub and this is what came up.
insmod ntfs
set root='(hd0,2)'
search --no-floppy --fs--uuid --set 7a841c73841c33db
drivemap -s _hd0) ${root}
chainloader +1
I then hit c on windows xp and entered each line on its own and the only error was this. error unknown argument '--fs-uuid'
View 6 Replies
View Related
May 20, 2010
I'm having a installation problem. I am trying to install Ubuntu on my laptop that is currently running Windows 7, and win7 is needed for use in projecting songs in our church services. The HD is a 500 gb already partitioned with the max. of 4 partitions. Win7 files are on the sda2 partition and my data files are on sda3. Sda1 and sda4 are smaller partitions, one is 3 gb's the other is 1 gb.
My question is, what is the best set up for me to install Ubuntu? I can't create an extended partition since I already have 4 partitions. I like my current partition set up as far as windows goes, but I would really like to get Ubuntu installed. I'm fairly new with Ubuntu, I like what I've seen so far. I had it installed with wubi in windows XP on a laptop that I just sold, and I've upgraded to the windows 7 laptop now, and I'm stuck!
View 9 Replies
View Related
Jan 7, 2011
My Laptop is Dell Inspiron 1525 with Dual boot Windows vista as well as Linux mint. I was trying to install Ubuntu over Linux Mint, but it is not detecting the existing partitions asking me to go ahead and edit the partitions manually (which I am not familiar with). Earlier when I was installing Linux Mint or SUSE, it was detecting the existing partitions and could install easily. Currently I am sure how to go about, but I would like to install Ubuntu badly.
View 1 Replies
View Related
Oct 30, 2010
I've been using Ubuntu 10.10 for just under a week. Recently, a partition called 'Data' has disappeared, and all my music and documents along with it. The folder is not to be seen in Places or on my desktop. My only way of finding it is to go to terminal. But when I try to open it there I get an error saying I don't have permission to read it. In Puppy Linux and SliTaz I can easily find the partition and read it. What should I do to bring it back in Ubuntu?
View 3 Replies
View Related
Nov 21, 2010
I'm currently working on fixing another problem url
I have a 60 g internal laptop hard drive, 30g is Windows 7 and 30g is Ubuntu.
When in Ubunutu I can access the window's driver and mount it, however, when I am in windows 7 it only shows the Window's partition.
Is there a simple way I can get the ubunutu partition to show up>
View 2 Replies
View Related
Oct 13, 2010
I have been upgrading from 9.04 to 10.04. Now, I want to install 10.10 from the beginning without losing the data in my current partitions but when I run the Maverick installer it recognize my disk as a whole with no partitions. From another posts, I suspect that the problem is in the partition list because it seems to be a duplicate partition but don't know how to fix it. This is the fdisk output:
Code:
jgarcia@jgarcia-laptop:~$ sudo fdisk -lu /dev/sda
Disco /dev/sda: 250.1 GB, 250059350016 bytes
255 cabezas, 63 sectores/pista, 30401 cilindros, 488397168 sectores en total
Unidades = sectores de 1 * 512 = 512 bytes
[Code]....
View 2 Replies
View Related
May 20, 2010
I have a problem after installing Debian and running it on my machine. Instead of taking me to a splash login screen, it instead remains a black screen like a console where I type in my username and password, and it remains in this black command line mode beginning ben@ben-desktop:~$. Like it does in a terminal. What can I do to resolve this? This is completely new to me and hasn't happened to me in Ubuntu or Mint. I am familiar with using the terminal for the odd task but obviously I can't use it like this without a visible desktop.
View 14 Replies
View Related
Jun 20, 2015
Debian 8.1
Kernel 3.2.0
xfce4
I own a secondary SATA disk I used without problems. In the last days I updated to 8.1 and after that I was not able to read the disk. The fdisk -l command has the output:
Code: Select allDevice   Boot Start    End  Sectors Size Id Type
/dev/sdc1Â *Â Â Â Â 63 117194174 117194112 55,9GÂ 7 HPFS/NTFS/exFAT
Disk /dev/sdb: 37,3 GiB, 40020664320 bytes, 78165360 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disklabel type: dos
Disk identifier: 0x00087e23
The disk is mounted on:
Code: Select all/dev/sdc1 on /media/stefano/MobileSata type fuseblk (rw,nosuid,nodev,relatime,user_id=0,group_id=0,default_permissions,allow_other,blksize=4096,uhelper=udisks2)
When i access to the disk, i always have the error:
Code: Select allstefano@GhilbaDebian:~$ ls -l /media/stefano/MobileSata
ls: impossibile to access to /media/stefano/MobileSata: input/output error
In the dmesg there is no particular message.
View 4 Replies
View Related
Oct 22, 2014
I manage to install debian on my flex 10 (lenovo), but now internet is not working, i can see the network, but even being able to connect to them i can't access the net...
View 14 Replies
View Related
Jul 19, 2011
I have DL120 Proliant server that has a P212 raid card, if I install Lenny it works fine however I need squeeze. If I upgrade or install a new version of squeeze the raid controller is no longer visible. I have done some snoopping and it seems as though the ciss drivers have been replaced by the hpsa drivers but I still cant seem to get the raid card recognised any body got any tips ?
View 1 Replies
View Related
Sep 18, 2010
How would I combine a empty partition with my existing partition? A reinstall is just an option and I need more disk space
View 2 Replies
View Related
Jan 23, 2011
I have Lenny installed.Is it possible to create a Live CD/DVD with all settings from this installation to use it on the same Hardware?
View 5 Replies
View Related
Jun 21, 2011
we have an existing debian server which host our moodle installs , but i need to look at converting to virtual and host within our test network for breal fix testing... but i cant find anything that will allow me to convert it as it stands.
we use Virtual machine manager, i would like to have used Redhat but its a no no ...
View 8 Replies
View Related
Oct 19, 2010
I have an old external 20GB HD formatted with NTFS. It used to be able to mount in Ubuntu just fine. One day I copied a huge file into it, then suddenly it failed to mount. nitially the message was something like the following:
Code:
Error mounting: mount exited with exit code 13: ntfs_attr_pread_i: ntfs_pread failed: Input/output error
[code]...
View 4 Replies
View Related
Aug 29, 2010
I've decided to install openSUSE on my Dell PowerEdge SC1420. It's got an onboard Adaptec CERC SATA 2S RAID controller that I've used to set up a RAID 0 using 2x 250GB SATA drives. The SATA RAID is enabled in BIOS (which I've updated to v. A04) and the logical device is set to bootable.
openSUSE sees the logical device and sets up 4 partitions (3x Ext4 and 1x SWAP) and install seems to go okay. I get through to the GNOME desktop and everything seems to be working okay until I reboot. Then I get an error saying that no partition is detected from the CERC 2S device.
Can anyone tell me what I'm doing wrong? I've spent the entire weekend trying different configurations of raid and partion file systems! I'm on the verge of buying windows 7 and I guess I'll have to if this just isn't going to work.
View 9 Replies
View Related
Mar 25, 2010
I want to partition an existing partion(to get room for another partition) without loosing data (without formatting)
View 2 Replies
View Related
Dec 20, 2010
I am going back to Windows for good. All I need to know is what are the partitions settings so that it will be reconized able in windows. I planning on saving some of my songs and other media that I have collected but I dont want loss all of on some wasted space that isnt readable. So simply put what setting are needed to make a partition visible in windows 7 using gparted.
View 1 Replies
View Related
Sep 8, 2015
I'm trying to upgrade my Win8/Wheezy 64-bit machine to Jessie 8.1 by installing from the amd64-bit netinstall iso image on a USB flash drive. I had done the previous, Wheezy, install on a disk partition that was whole-partition LUKS/LVM drive, with separate logical partitions for swap, root, and home.
Before doing the upgrade, I booted to the BIOS to ensure that my UEFI system had the correct, CSM and Legacy modes enabled in it, so that installer would boot using the non-efi BIOS mode.
Step one of the upgrade was to boot the netinstall and enter the rescue mode so that I could manually do the cryptsetup/LVM business. When I returned to the installer, I mounted the now-recognized logical partitions normally, choosing to format only the swap and / partitions.
During the entire process, I had to go into rescue mode one more time to manually mount the unencrypted /boot partition, along with my /home partition. I copied a backup of my old /etc/crypttab from the latter, and after returning to the installer, finished the install. That finish included installing grub on my hard drive's main boot partition.
Everything seemed to finish with no problems. However, when I try to boot the debian bootloader, I get tossed to grub rescue with the message that '/grub/x86_64-efi/normal.mod' doesn't exist. At this point I returned to the installer, mounted the /boot partition, and saw that there grub-install didn't create that an x86_64-efi directory at all. Instead, it had created an i386 directory. The exact name escapes me at the moment.
I *think* that my install was clean other than the last bit that was related to installing the bootloader. How to reinstall the bootloader in such a way as to make all of this work.
View 2 Replies
View Related
Jan 14, 2010
Trying to clean install 11.2 dual boot with Win xp already installed. How do I create a new home partition, don't want to preserve the existing home partition from a previous attempt. DVD installation and automatic config keeps saving the thing.
View 5 Replies
View Related
Apr 26, 2011
I sudo apt-get uninstalled a bunch of stuff I shouldn't have. Now my Ubuntu Partition doesn't boot up correctly, something about the graphic system, video system, etc. all being unconfigured. (I'll get the exact error later.) All I can use is the command line.can I install Ubuntu over my old Ubuntu partition without messing up rebooting/GRUB and all that?
View 3 Replies
View Related
May 7, 2011
I am running ubuntu 10.10 on a drive with 3 partitions. 1 windows and 2 ubuntu partitions.
The ubuntu that I am running right now is on a partition that is too small. I need to either expand it to include the other ubuntu partition or reinstall 10.10 and copy my existing partition to it. Can this be down?
I have this version working the way I like it and have tried 11.04 and am holding of for now. Still the fact remains that my working copy is on a partition that is really too small I only have 2 gig free space on a drive that is a 500gig.
View 3 Replies
View Related
Jun 10, 2009
I have a doubt with how to add un-used space in my RHEL 4.0(linux) server to a existing partition. I will explain the scenario:-I have some 220 GB space on my linux server as shown by the command as below-
[root@JispNewDB ~]# fdisk -l
Disk /dev/cciss/c0d0: 733.9 GB, 733909245952 bytes
255 heads, 63 sectors/track, 89226 cylinders
[code]...
View 6 Replies
View Related
Jan 17, 2015
I am having issues with Grub 2 after installing Debian 7.8.0.The computer is a HP Pavilion 500-307nb. I made the original harddrive /dev/sdb and inserted a Samsung Evo 840 as /dev/sda. From the original hard drive (/dev/sdb), I wiped the windows partition, but left all other partitions unchanged (in case I would ever want to recover the desktop to its original state). I replaced the wiped windows partition with a swap partition and an LVM partition.These are my hard drive partitions:
/dev/sda (Samsung Evo 840)
Number Start End Size File system Name Flags
1 1049kB 3146kB 2097kB primary bios_grub
2 3146kB 944MB 941MB ext4 boot
3 944MB 94.4GB 93.4GB host lvm
4 94.4GB 1000GB 906GB guests lvm
[code]....
The partition /dev/sda3 has 2 logical volumes with filesystem ext4 that I mount to / and /home.The partition /dev/sda2 is mounted to /boot..When I install like this, Debian installs fine, however Grub2 is not installed correctly.Debian installs grub-pc which seems not able to boot the gpt partition. So I boot the Debian CD in rescue mode and execute:
mount /dev/sda2 /boot
aptitude purge grub-pc
aptitude -y install grub-efi
After rebooting, I come in the grub rescue shell, which says: error: no such device: 986f2176--4a4b-4222-83b9-8636a034b3c7.
When I then enter in the grub rescue shell:
set boot=(hd0,gpt2)
set prefix=(hd0,gpt2)/grub
insmod normal
normal
Grub and Debian start up correctly.why can Grub not start up automatically correctly? Where does the UUID 986f2176--4a4b-4222-83b9-8636a034b3c7 come from? I have reinstalled Grub several times, I have reinstall Debian several times, I have even wiped all partitions from /dev/sda and recreated a new gpt table with parted and manually set the partitions in parted. Still on each reinstallation, Grub fails because it cannot find exactly the same UUID. Since this UUID is always the same, it must be stored somewhere, but it cannot be the partitions, I have wiped them and the partition table several times.
I did though a firmware update of the Samsung Evo 840 before reinstallation, could this be a cause?Also the problem is not in grub.cfg. Grub starts correctly if I enter the commands above in the grub rescue screen and the UUID value does not appear there.
View 5 Replies
View Related
