I run a headless Ubuntu file server which I access remotely via ssh or using VNC. After reboot, short of moving monitors around, is there anyway to start the GUI and continue using VNC as I normally would? I still rely on the GUI to get done what I need for the most part.
View 9 RepliesI have installed XAMPP in Ubuntu, but I do not know how the process continue after the start XAMPP.
View 3 Replies View RelatedIn my pc i have installed Fedora 14 x86_64 and my Fedora didn't start. My problem is that i can not continue in login step and when i press F1 or Esc I get this message:
[Code].....
I created a live usb and I am trying to boot linux, but after it starts a large written ubuntu screen when starting appears i.e its boot screen but it do not start and continues as if it is still loading.
View 8 Replies View RelatedMy requirement is nearly transferring 50GB files from remote server to local server via SCP command,while transferring the data its break-en because of some reasons in 35% itself. is it possible to resume the transfer process again from this 35% process.
View 3 Replies View RelatedI have a server here and want to set up transfer jobs to run overnight.
I log in via SSH to it from my laptop and would like to start the job, disconnect yet still have it run.
Is this possible, if so, how?
Im trying to run synergy on startup. This works fine on the client, but it wont start automatically on the server. I put this line in an entry in startup applications:
[code]...
but still no dice.
I have setup a CentOS 5.5 server as a DHCP server. That will be it's only task in a Cisco callmanger VoIP environment The DHCP server that comes with CentOS 5.5 is from ISC V3.0.5 -redhat.
The server (HP DL360) has two physical NIC's of which only NIC1 is used (ETH0)
ifconfig shows:
Code:
The interface has a fixed IP setup.
My dhcp.conf file looks like this:
Code:
When I start (try to) dhcpd via the service interface or via the prompt as
Code: service dhcpd start
I get an [FAILED] message and the following is in /var/log/messages
Code:
But when I start the DHCPD on the comamnd prompt in debug mode it looks as follows:
Code:
and /var/log/messages shows:
Code:
Why does the system ask a declaration for eth0 0.0.0.0?
I'm configuring a new Centos 5.5 server in replacement of an old W2K server.The topology of our network is simple : one file/dhcp/dns relay server and workstations (PC's and some MAC's) plus network printers and scanners.All the workstations have dynamic IP addresses (easier because a lot of 'dynamic' changes : new persons with their own laptop, ...) and the server and printers/scanners have fixed IP addresses.I edited the dhcpd.conf (see here underneath), I have the file dhcpd.leases but it doesn't start !
DHCPD.CONF
ddns-update-style interim;
ignore client-updates;
[code].....
I installed IBSng in ubuntu-server .but i can not start this server :Code:[root@myserver]# /etc/init.d/IBSng start.: 8: Can't open /etc/rc.d/init.d/functions"functions" file is in RPM base system . and ubuntu have not this file
View 2 Replies View RelatedI'm installing Ubuntu Karmic Koala via Wubi. Tried many times, still didn't work. It said "Cannot find the ISO /ubuntu/install/installation.iso bla bla bla..."
I'm not sure why but I've reboot the computer properly. Anyone know why is this happening?
One thing, please don't say "Do a real Ubuntu installation" as I need my brother's permission first before making a partition and install it, in case of anything happen.
I had some problems with the latest kernel (didn't play well with Warcraft)... So, I when I rebooted; I selected an older kernel in Grub Worked perfectly. How can I get rid of the newer kernel, and continue to use the old one?
View 2 Replies View RelatedI have been trying to install on my toshiba satellite c655 laptop the ubuntu operating system. Anytime it gets to where i can use it as a live DVD and I would want to install, it gets to stage 3 of 7 and gets stuck. No error messages are given, the install dialog can be minimized and other task done but the installation will never continue. Anyone with idea about how to go round it.
View 3 Replies View RelatedI had a dual boot of Ubuntu 11.04 with Windows XP SP3. I formatted the ext4 partition of Ubuntu. Now when I start my pc, it says "Unknown Filesystem" and then gives me a grub command line. How can I get rid of that and just continue using my Windows?
View 3 Replies View RelatedI got this keyboard no found error...no problem since my grub menu 1st entry is ubuntu...so once I got to load ubuntu, the keyboard magically works.
Basically when booting, it show "Keyboard not detected, press f1 to continue" then at the grub menu, I am not able to select win xp or anything. So by default 1st entry is ubuntu so I can boot into ubuntu.
Once ubuntu is loaded, I can use the keyboard to enter my password....
So I was wondering if the cmos battery is flat...but still why can't my key board be detected when booting up?
I am trying to install some software through wine, but unfortunately the cd is not auto-mounting, is there a way I can manually mount the cd and continue installation?
View 9 Replies View RelatedOver the past two weeks my laptop has started locking up at random. I thought maybe it was a thermal issue, because I have an upgraded hard drive (put in 2 years ago) and once a month or so I might get a heat related lockup. I keep my fans running at high speed and the laptop elevated now and don't typically have an issue.
The freezing has started to become a daily occurrence now, and yesterday it locked up three times. I am able to move my mouse (unlike thermal lockups where everything goes down) but unable to click anything. The entire display freezes, and my cpu monitor doesn't continue to update.
I finally ssh'd into my laptop and was surprised to see it responding just fine. htop showed that my X-server was at 100%. When I killed it, X restarted automatically and promped me to log in. Everything is fine after this until the next lockup.
When I don't have access to ssh I have to hard-shutoff the laptop. That can't be good on this 5 year old macbook. I have done my system updates in the past two weeks that may have triggered this, but I don't remember anything specifically. I've tried all versions of my kernel that are installed but nothing, I have the intel video and have not had problems with it up until now.
2$ uname -a
Linux macbook 2.6.32-30-generic #59-Ubuntu SMP Tue Mar 1 21:30:46 UTC 2011 x86_64 GNU/Linux
3$ lspci|grep VGA
00:02.0 VGA compatible controller: Intel Corporation Mobile 945GM/GMS, 943/940GML Express Integrated Graphics Controller (rev 03)
Can anyone suggest something to try? I'm not sure how to go back to older versions of the the video drivers, but I'm not even sure if that is the issue. I did add the following to /etc/apt/sources.lst after the lockups started occuring:
Code:
# X
deb http://ppa.launchpad.net/ubuntu-x-swat/x-updates/ubuntu lucid main #X-Updates PPA
deb-src http://ppa.launchpad.net/ubuntu-x-swat/x-updates/ubuntu lucid main #X-Updates PPA
and did a full update, but this hasn't helped.
I'm running Ubuntu 10.04 LTS
I'm just a newbie to this operating system. Even though I'm having some trouble, it still seems more sensible to me than Windows. I'd like to continue to use it, but I'd like to know why it doesn't work for me sometimes, and I'd like to see if I can't make it work better for me.
After I upgraded to 11.04 I've had a host of problems. My USB ports have intermittant trouble recognizing storage devices. My USB ports also have intermittant trouble recognizing my USB WiFi device. The VLC player will crash the Gnome Desktop whenever I use it. I still haven't figured it out.
I'm interested in the following question:
Why can't software and hardware that already works be insured to continue to work after an upgrade?
I use FC8 and i want some services like HTTPD and NAMED to start at the start of the system , how to create a script to do that .
View 9 Replies View RelatedFresh install, followed the directions,
# ./configure --with-mysql --with-openssl --with-openssl-libs=/usr/lib (MySQL 5.5.12 & OpenSSL 1.0.0)
Everything seemed to go well enough. Stock lighttpd.conf. However, it won't start on boot. Not even manually via:
# /etc/init.d/lighttpd start
or
# /etc/init.d/lighttpd -f /etc/lighttpd/lighttpd.conf (came across that while scouring Google).
No messages, no logs, nothing. ?
I would like to ask your opinion for a new C++ project.I just finished writing a chess engine in a software engineering lecture.I don't see any way to continue with that project and I would like some new ideas.I would prefer to start something on my one but suggestions about small open source projects that are already out there are welcome.
View 3 Replies View RelatedHow exactly do I continue typing after putting in a command in a post?
View 2 Replies View RelatedToday for strange reason, one of my Ubuntu 64 bit server Linux VM failed to start ? it stopped in the FSCK scan status with the error as attached. few days back I've added new hard disk successfully and format it as sdb5 without problem.
View 3 Replies View RelatedI'm having trouble installing Ubuntu Netbook edition (v10.10) on my (brand new, No other OS installed) Asus Eee PC 1215T. I've successfully booted from the flash drive and can "Try Ubuntu," and everything works when doing so, however when I try to install it, the installer freezes on the second screen, right after language selection. To be a little more specific, that's the screen with the checkmarks next to "has at least 2.5 GB available drive space," "is plugged in to a power source," and "is connected to the Internet."
After I hit the "Forward" button on this screen, I just get an infinite wait cursor. I can still freely check and uncheck the boxes, and click the "Quit" button, so it's not entirely frozen, but it just won't progress any further.
I had this *exact* same problem just over a week ago when I tried to install Ubuntu on my desktop, also using the flash drive method. I ended up using the Windows installer to get it installed on my desktop, but as the netbook doesn't have any OS installed, that's not an option this time.
I have downloaded Ubuntu 9.10 4 times from various sites and have burn the ISO on CD.Half way during the installation a message jums up concerning faulty CD or faulty CD ROM and that ubuntu can't continue coppying files from CD which in this case it doesnt apply, as my CD ROM is in good order.I have been dissapointed after noumerous tries installing UBUNTU.
View 2 Replies View RelatedI have a folder called VIDEO-TS filled with .vob files and other things. I did it before, but don't remember what I used to make it a regular dvd video. I tried Devede, but when I drag the folder to the app, it says "folder contains non-vob files and can't continue" or something like that.
View 1 Replies View RelatedI was downloading to a USB drive and went to continue the download without the USB drive plugged in. "Save location not found " etc. So I plug in the drive now it wants to start all over. How do I make it start from where it left off. There are no transmission files on the ISB drive dir. that seem to hold the info and the transmission "queue" has reset as if I had not downloaded any data yet.
View 2 Replies View RelatedI am running Debian squeeze and I am trying to install hplip-3.10.5 so I can use my new HP Photosmart C4750 printer.I downloaded the automatic installer and ran it and it gave me the following error message:
RE-CHECKING DEPENDENCIES
------------------------
error: A required dependency 'cups-image (CUPS image - CUPS image development files)' is still missing.
error: Installation cannot continue without this dependency.
error: Please manually install this dependency and re-run this installer.
So I ran apt-get install cups-image and got the following:
raygo75@RayGo1:~/Desktop$ sudo apt-get install cups-image
Reading package lists... Done
Building dependency tree
Reading state information... Done
E: Couldn't find package cups-image
does the package "cups-image" exist? and if it does were can I find it. I have looked to no avail. I have posted a question on hplip seeing as that is were I got the script from.
I largely believe the name of the program is irrelevant, but if you must know, it is Qjoypad. Anyway, I follow the instructions, but an error is returned "libXtst is required to continue with the installation". Well, I have libXtst6.
View 5 Replies View Relatedrunning a large program on a remote SSH server the other day when I was disconnected. This is a large program, ~48 hours to complete, and I was disconnected around hour 40. I have restarted the program using the following (Note: I am already ssh'd into the server) ./20090427_9crossing > 20090427_9crossing.out & Now, I believe this will run the program in the background and output to the file. So, if I get disconnected again will it continue to run? If not, is there a way that I can get it to keep running?
View 7 Replies View Related