Ubuntu :: Process Continue After The Start XAMPP?
Apr 20, 2011I have installed XAMPP in Ubuntu, but I do not know how the process continue after the start XAMPP.
View 3 Replies
ADVERTISEMENT
General :: Kills A Process Internally Or From Where It Picks File To Continue Its Process?
Jan 8, 2010one tell me the internal working of kill command. that is how it kills a process internally or from where it picks file to continue its process.
View 3 Replies View RelatedGeneral :: Save The Process And Log Out Then Log In And Continue The Process?
Nov 16, 2010I've been running my shellscript for about half an hour now. It's taking longer than I thought to process all the data. I have the process ID of it. Is it possible to save the process and log out then log in and continue the process? I know how to pause a process using kill -pause pID and continue it using kill -cont pID. But that only work if you don't log out after pausing it.
View 5 Replies View RelatedFedora :: Share The Process To Make Xampp Work On F64 Bit?
Jul 22, 2009I've just installed LAMPP on F11 I wanted to share the process to make Xampp work on linux (fedora) 64 bit.
1- Download Lampp : [URL]../en/xampp-linux.html#374
2- log as root, and unzip the archive file in "/opt" : it is installed !
3- to launch lampp : log as root (or sudo), and use "/opt/lampp/lampp start"
You should have error messages ! So do the following : - modify "/opt/lampp/lampp" : comment this part of the script [URL]..it-rhel.html):
# XAMPP is currently 32 bit only
#case `uname -m` in
# *_64)
# if /opt/lampp/bin/php -v > /dev/null 2>&1
# then
# :
# else
[Code]...
Networking :: Forcing SSH Process To Continue Running?
Apr 27, 2009running a large program on a remote SSH server the other day when I was disconnected. This is a large program, ~48 hours to complete, and I was disconnected around hour 40. I have restarted the program using the following (Note: I am already ssh'd into the server) ./20090427_9crossing > 20090427_9crossing.out & Now, I believe this will run the program in the background and output to the file. So, if I get disconnected again will it continue to run? If not, is there a way that I can get it to keep running?
View 7 Replies View RelatedServer :: Continue The SCP Transfer Process Once Break?
Jul 23, 2011My requirement is nearly transferring 50GB files from remote server to local server via SCP command,while transferring the data its break-en because of some reasons in 35% itself. is it possible to resume the transfer process again from this 35% process.
View 3 Replies View RelatedSoftware :: Does Open Process Continue To Work If Putty Session Is Closed
Apr 14, 2010I am downloading a big file on linux VPS, and I am connecting remotely via Putty to do it? Once I initiated the wget command to download the file, if I close the putty window, will wget continue to download the file in the background even though the session is technically closed?
View 11 Replies View RelatedUbuntu Servers :: How To Start Xampp From Crontab
Apr 5, 2010i want to Xampp run and start all time when i start pc. i don know correct command for use crontab when i want to use it i must delete ># m h dom mon dow commandor not ?
View 2 Replies View RelatedUbuntu Servers :: Xampp Will Not Start On Boot?
Sep 29, 2010I have recently set up my web server using the LAMPP package for Ubuntu. Now I'm running Ubuntu Server 10 so my machine boots into the console and not gdm. Also I have my machine autologin as root so I can simply turn my server on and not mess around with logins. Now I created a simple shellscript for starting lampp and then I put it into etc/init.d/, chmod -x file.sh to give it executable permissions, then I update-rc.d file.sh defaults but nothing happens on startup. It simple takes me to the console and nothing more happens. I have to manually start lampp on every bootup.
View 1 Replies View RelatedServer :: XAMPP - Could Not Start MySQL? (Ubuntu 11.4)
Jul 21, 2011XAMPP: Couldn't start MySQL! I have Ubuntu 11.4. After downloading XAMPP, I went to my Downloads. I then went to the Folder (xampp-linux-1.7.4.tar.gz) and right clicked on it. The options window opened, and I selected "Extract Here"! after doing so a Folder called lampp appeared. The next step I did was open my Terminal and typed ( sudo nautilus / ). I pressed Enter and a window with a bunch Folders opened up. I selected, and opened the opt Folder. I then dragged the lampp Folder to the opt Folder.
The lampp Folder is now in the opt Folder. I right clicked on the lampp Folder and selected Properties, and then the Permissions tap. I set all 3 Folder access: -to- Create delete files and all 3 File access: -to- Read and write. I checked Allow executing file as program, and Apply Permissions to Enclosed Files button, then closed. I went back to Terminal and typed (sudo /opt/lampp/lampp start) and pressed Enter. Everything is working fine execpt MySQL!
Starting XAMPP for Linux 1.7.4...
XAMPP: Starting Apache with SSL (and PHP5)...
XAMPP: Starting MySQL...
XAMPP: Couldn't start MySQL!
XAMPP: Starting ProFTPD...
XAMPP for Linux started.
I don't know if it makes any difference but I do have Netbeans IDE 7.0 php installed and I've only worked on html and CSS on it.
Ubuntu :: Server - Start The GUI And Continue Using VNC?
Mar 24, 2010I run a headless Ubuntu file server which I access remotely via ssh or using VNC. After reboot, short of moving monitors around, is there anyway to start the GUI and continue using VNC as I normally would? I still rely on the GUI to get done what I need for the most part.
View 9 Replies View RelatedOpenSUSE :: Mysql Wont Start On Xampp?
Oct 24, 2010I've just executed /opt/lampp/lampp security and restarted lampp, now it shows as deactivated in status when I browse to http://localhost
The default username lampp doesn't work with my new passwords, phpAdmin doesn't let me log in.... everything.
Fedora :: 14 Didn't Start - Cannot Continue In Login Step
Jul 14, 2011In my pc i have installed Fedora 14 x86_64 and my Fedora didn't start. My problem is that i can not continue in login step and when i press F1 or Esc I get this message:
[Code].....
General :: LiveUSB - Boot Screen Appears But Do Not Start And Continue
Aug 5, 2010I created a live usb and I am trying to boot linux, but after it starts a large written ubuntu screen when starting appears i.e its boot screen but it do not start and continues as if it is still loading.
View 8 Replies View RelatedDebian :: Remove "continue With Installation Process" From Windows XP?
Sep 9, 2011I installed Debian 5.0.8 alongside Windows XP 64bit, and the installation went fine. However, when I choose to boot into Windows, the menu still shows the option to continue with the Debian installation. Debian was installed by burning the iso in Windows and then launching the CD rather than booting into the CD. My searches turned up with results to actually continue with the installation process, which like I said, went just fine. I want to boot right into Windows from Grub (if Windows is selected) instead of having the installation menu pop up again.
View 1 Replies View RelatedFedora :: Schedule A Process To Start At A Specific Time (not On Start Up)?
Jan 19, 2010I'm trying to find how to schedule a process to start at a specific time (not on start up). How would I schedule a process/application to start at a specific time (if it matters, it will be a background process). For instance, have process abc start every weekday at 5am. I've done this for windows many times though have only been using linux regularly for a few months and haven't figured out the best way of doing this.
So far the best solution I have is to create a program that will start on boot and have it check the time and sleep until the required time and then start the required process(es) at the required time(s). But this seems more of a hack since I'd expect there to be a proper way of doing this.
Ubuntu :: 10.10 - What Process Start Thrashing HD
Nov 20, 2010ubuntu 10.10 At times something starts thrashing the HD. Often after the computer has been taken out of Suspension. The whole things slows down and stays slow. This can be fixed by logging off (which takes quite a while under this condition while the HD light stays on, solid) and logging back on. Then the system becomes responsive, with only HD light flickers. Anyway, I can't determine what process is doing the thrashing. System Monitor doesn't show any memory problems, and neither do top or htop. htop shows plenty of swap space available, and memory usage is on par with what it looks like when there is no thrashing. Is there some tool that can display what processes are running the HD so hard?
View 3 Replies View RelatedUbuntu Installation :: 10.10 - No Enough Space To Start Process
Dec 4, 2010I have just build a new computer, and I want to install Ubuntu 10.10 on it. The problem is that when I run the Live cd and start the installation it cant find enough space to install. I have a 1TB WD Black Caviar disc installed and I can see that the BIOS detects it.
View 3 Replies View RelatedUbuntu Installation :: Connect To Itunes For The Start Up Process?
Oct 5, 2010i just got my iphone ,and as we know it is asking me to connect to itunes for the start up process ... so what should i be doing ? i got wine just installed itunes 7.2 ( ya is a old version but some 1 ol suggested it will b better , i did it ) anyways coming to the point , i c itunes is having some problem,as it is hanging and not working i thought it would .so is there any ways i can install itunes , and will give a better performance
View 2 Replies View RelatedUbuntu :: Start A Non-terminating Process In Terminal Window?
Oct 18, 2010how to start a process in Ubuntu terminal window that is not killed when the terminal window closes.
View 9 Replies View RelatedUbuntu Servers :: Sometimes Does Not Start - Boot Process But Then Hangs
Oct 31, 2010Running Ubuntu Server 10.04 32 bit. Sometimes when I reboot it does not start up, It seems to be going through the boot process but then just hangs. I have had a look at the log files and can't see anything, but I'm not really sure what I am looking for.
View 2 Replies View RelatedUbuntu :: Gnome-panel Process Doesn't Start?
Jan 8, 2011I forced a quick restart with 'sudo shutdown -f now' and when logged back in gnome-panel doesn't start at all. I can right-click on the desktop & run terminal from there, so I'm running web browser from terminal. I tried 'sudo killall gnome-panel' & got 'no process found' I tried doing a full restart, still the same.
I tried running gnome-panel from the terminal.
'gnome-panel' gives me my panel after a 4 or 5 second delay. If I exit the terminal or Ctrl-C I lose the panel again.
'sudo gnome-panel' gives me what appears to be the panel for the root user.
Ubuntu Servers :: 10.04 - MySQL Process Does Not Start At Boot
Apr 13, 2011On my Ubuntu 10.04 LTS Server, mysql does not start at boot. I tried this but does not work.
Code:
root@dev:~# chkconfig mysql ON
The script you are attempting to invoke has been converted to an Upstart job, but lsb-header is not supported for Upstart jobs.
insserv: warning: script 'K02mysql' missing LSB tags and overrides
insserv: warning: script 'S10vzquota' missing LSB tags and overrides
The script you are attempting to invoke has been converted to an Upstart job, but lsb-header is not supported for Upstart jobs .....
How to make sure mysql process comes up automatically after every reboot
General :: Start Process Automatically?
Jul 7, 2010I want to start process automatically For Ex:- To start snort it need the root user, So here I need a script which will start snort automatically without asking the root user or password.So that I can start snort from anywhere as same as root
View 3 Replies View RelatedUbuntu Security :: Post-start Process Terminated With Status 1?
Feb 22, 2010When I restart my computer the following messages come up:
__________________________________________________ _
init: usplash post-start process (2221) terminated with status 1
* Stopping ClamAV virus database updater freshclan
[code]....
Ubuntu Servers :: How To Use Start-stop-daemon To Execute Process
Sep 27, 2010I've just installed subversion.I need to create a script /etc/init.d/svnserve that will start at boot time.I want to use start-stop-daemon --start so I can track my process and eventually kill it using start-stop-daemon --stop.My problem is that I can't get it to work and the documentation shows no exemple.
I've replaced $DAEMON by the whole line: svnserve -d -R -r $REPO_ROOT and got -d is not an option.I'm not quite sure what to do at that point. If someone has some experience with start-stop-daemon it would be great.
Ubuntu Installation :: 10.10 DVD Hanging - No Window Opened To Start Process
Dec 27, 2010I downloaded Ubuntu 10.10 and made created a DVD. When I started installing it, I'm not able to do it. I think its hanging. This is what happening: First I found a screen saying 'ubuntu 10.10' and it loaded for some time then I got a screen with a black color task bar at the top of the screen, then after some time it turned into white color and after some time it disappeared. Nothing else happened. I didn't find any pop-up window to start installation of OS..
But when I tried this in my friends house, I found that instead of 'ubuntu 10.10' there came 'Ubuntu' LOGO and it was little bit slow but a pop-up window opened to start installation..
Why its not coming in my PC..
my computer configuration :
Windows XP, SP 2
256 MB RAM, 1.81 Ghz
AMD 64 Athlon Processor 1800+
I want to shift my OS to Ubuntu completely.
Debian :: How To Add Own Application In System Start Process
Sep 25, 2015I am new to this debian plotform. How can I add my app to init.d linkup.
I did my programe for I2C Bit banging method and got output on Beaglebone black rev.C hardware.
I want to run my code after booting of beaglebone with out connecting to laptop or login process.
I want just powerup,then run my programe default.
/***************************Extra Information*************
#etc/inittab file
# The default runlevel.
id:2:initdefault:
# Boot-time system configuration/initialization script.
# This is run first except when booting in emergency (-b) mode.
si::sysinit:/etc/init.d/rcS
[Code] .....
Software :: How To Check Which Script Start Process?
Sep 7, 2010When my system starts this command is executed by a script /usr/sbin/apache2 -k start...How can I find which one start it? I check in rc2.d/ dir in the apache script but didn't found anything similar. Where else should I look?
View 7 Replies View RelatedUbuntu Installation :: Init: Dbus Pre-start Process (511) Terminated With A Status 1
Aug 19, 2010I had been having problems with every LiveCD after 8.04.1 I tried both xubuntu and ubuntu (same internals, same results)
I ended up installing xubuntu 10.4 using the text mode installer.
The system basically works, I can not get gdm running.
dbus fails as noted above. I found launchpad bug #446971 and tried some of the work arounds with no success.
The system is an old eMachines T1120
Code:
CPU: Intel Celeron Processor 1.20GHz (w/256KB)
Operating System: Genuine Microsoft Windows XP Home Edition
Chipset: Intel 810e chipset
[Code]....