I installed IBSng in ubuntu-server .but i can not start this server :Code:[root@myserver]# /etc/init.d/IBSng start.: 8: Can't open /etc/rc.d/init.d/functions"functions" file is in RPM base system . and ubuntu have not this file
View 2 Replies
The setup: 2 identical boxes running Fedora Core 15 2.6.38.8 kernel, 64bit that Im trying to setup in a cluster using luci.
So far: Managed to create the cluster.conf file, defined the nodes with hosts and such.
The problem: When I try to have the 2 nodes (nod1 and nod2) join the cluster via luci's web interface, I get
"Starting cman: Job failed. See system logs and 'systemctl status' for details."
When I check code...
Now. I know that cman service is installed. I even tried removing and reinstalling the whole thing, dependencies and all, but it just won't start and I've run out of ideas.
I have installed fedora 11 and I have installed on it hosting control paneland for a week the server was working fine for no reasonI have regulated control panel and I have added other functionswhen the hosting control panel was turned off, I have turned off the serverNext day I have turned on a server again and fedora 11 started to go onbut some window where the log in has to be does not appearinstead that window I saw a black screen with the cursorand around the cursor the revolving thingI have tried for several times to load it- it does not workWhat can it be and how can that be fixed
View 14 Replies View RelatedI have installed nfs-kernel-server on the server and nfs-common on the client. Assumeserver 192.168.1.1client 192.168.1.3
content of /etc/exports is:
/home 192.168.1.0/255.255.255.0(rw,sync,no_root_squash)
/home/nfsroot 192.168.1.0/255.255.255.0(rw,no_subtree_check,async,no_root_squash)
[code]....
I have a RHEL5 machine having mysql5.0.22 is installed in it. i also installed java through "jdk-1_5_0_19-linux-i586.bin" package, and its version is 1.5.0_19. I am trying to check if any JDBC driver for Mysql Server is installed on my system . How can I do this? If any driver is already installed How can I get the file path for those driver files? is it comes along with jdk packages? As i am not a programmer, and does't know more about jdbc.
View 1 Replies View RelatedI know this seems obvious but i'm stuck. I'm trying to install squid via the command "yum install squid" and here is the output:Quote:
Setting up Install Process
Setting up repositories
update 100% |=========================| 951 B 00:00
[code]....
I'm trying to get my server back up to snuff. I'm using Debian Squeeze right now and I'm up and atom with apache, mysql, php, pureftpd, ssh, and I have squirrelmail installed.
My dilemma comes with the mail part of the whole ordeal, Postfix and Courier are installed, have their keys made, and for what I assume, are configured correctly. HOW do I make new virtual users? My domain points to this machine as well as my MX record for mail.mydomain.com.
I need IMAP and POP working. And upon the creation of new email users, will SquirrelMail interface with Postfix and Courier? When I installed SM I set it up for use with Courier.
When I am trying to run the Xserver using the command startx I am getting the below mentioned error
xauth: creating new authority file /oracle/oracle10g/.serverauth.22555
Fatal server error:PAM authentication failed, cannot start X server. Perhaps you do not have console ownership?
[code]....
I am trying to do a https access with virtual hosting with apache.
But when I install mod_ssl rpm httpd server does not start again
I am stumped
httpd -t shows syntax is OK
I am running CentOS 5.4 and Postfix. So when I start Postfix server than immediately maillog is starting to grow. And the first lines that I see in it are:
[Code]...
Server is already in several blacklists and I desperately need to do something.
I have one server with Jboss and Tomcat installed, I have to start these servers manually everytime I do reboot the server.How I could do to start Jboss and Tomcat automatically, when I do reboot the server?
View 1 Replies View RelatedI'm trying to move a mysql 5.1.50-community InnoDB database from one location to another.When starting the service I get:Starting MySQL.Manager of pid-file quit without updating file [FAILED]I've searched for a way to do this but I can only find people who describe what I've just done.
View 6 Replies View RelatedI have installed a linux server in my office to run 16 machines. Its main use will be a internal mail server but will be also running websites.
I have installed Ubuntu 9.10 server x64 and have got apache running.
I am looking for the simplest more robust solution for smtp, pop3 and imap. I have only ever used qmail before and found it a pain to configure and its getting old so I though I should probably try something new. I have not much experience with running pop3 or imap on linux so would love a suggestion on that.
I have developed a small website using jspx pages.Now i want to host the website to a server which is a linux machine.The linux machine which i m referring to is already hosting some web pages(jspx) through a web server Which is running at port 8888.My first question would be "How would i check which web server is installed in the server?"Due to my little knowledge about linux machine .I have copied some simple html pages to /var/ www/ html location. The pages are getting accessed correctly on port number 80.But how would i go about hosting jspx pages.
View 13 Replies View RelatedWondering if most people have GNOME or KDE installed on their server, and how much memory do these guys consumed.
I have been running a VPS website with only 256MB of RAM fine, though memory does appear to be a bottleneck at times. So got a new server with 1GB RAM but I'm surprised to see after installing CentOS 64-bit with GNOME the memory consumption varies between 600MB-1GB.
The only difference is I've never had used any GUI desktop on the VPS (don't think the hosting company offers one). Wondering if the memory consumption came entirely from the GNOME desktop I installed.
Would most people install with GNOME, configure all the stuff required, and then remove it?
how to start and stop jboss server i had done but it is saying permission denied.
View 2 Replies View RelatedI'm using Ubuntu 10.04 LTS - the Lucid Lynx.
I have reinstalled mysql-server-5.1 using the command "sudo apt-get --reinstall install mysql-server-5.1".
But its giving error message at the end of installation when its trying to start the server.
The error message is as follows.
When i tried to start the server after the installation, i get this error message
Note : The file "/etc/mysql/my.cnf" is empty.
have to create a webhost on an running fedora server which runs multiple webpages + a coldfusion serveri have to add an coldfusion virtual host to these.what i would do:*crate a new user & group*enter vhosts.conf and copy an existing host and modify it for the new one.*create an new folder and copy the main files (phpstarter and webroot) *chown the files for the right useri think an apache graceful would be needet
View 1 Replies View RelatedRight now i have a HP DL 180 Server with 130 Gb Hard Disk & 8 Gb ram after Raiding0+1. i want to configure Domain Controller Server for my office for 200 to 300 Users. what should the partition size must be mentioned in my 130 Gb Hard Disk, is that going to be Sufficient for ME ?
i am bit confused about /Usr /Var /Boot partitions, as i need to manage perfectly in 130 GB
if i go with 4 Gb swap and remaining for " / " is that will be fine ? should i need to specify partition sizes separately for / tmp /var / usr ..
I'm running a linux cloud server with the following config
1.2ghz Processor allocation
752MB Ram
The site loads slow and clicking a link almost freezes the page for a second. Also, the page loads could be much faster. We've been running mysqltuner and have pretty much optimized all slow queries. Is there anything we can do to fine tune the server for faster and more responsive?
Httpd.conf
Timeout 20
KeepAlive Off
MaxKeepAliveRequests 100
KeepAliveTimeout 5
<IfModule prefork.c>
code....
iam trying to sync file server data into backup server machine by command- rsync -avu path/of/data ipaddress-of-backup-server:/path/where/to/save after running it ask for root password and manually it is successful.but i want to make it automatic.for that i also tried cronjob and also generated authentication key but iam not successful in login automatically..anybody know how to authenticate root to login for storing data in backup server.
View 14 Replies View RelatedI will be relocating to a permanent residence sometime in the next year or two. I've recently begun thinking about the best way to implement a home-based network. It occurred to me that the most elegant solution might be the use of VM technology to eliminate as much hardware and wiring as possible.My thinking is this: Install a multi-core system and configure it to run several VMs, one each for a firewall, a caching proxy server, a mail server, a web server. Additionally, I would like to run 2-4 VMs as remote (RDP)workstations, using diskless workstations to boot the VMs over powerline ethernet.The latest powerline technology (available later this year) will allow multiple devices on a residential circuit operating at near gigabit speed, just like legacy wired networks.
In theory, the above would allow me to consolidate everything but the disklessworkstations on a single server and eliminate all wired (and wireless) connections except the broadband connection to the Internet and the cabling to the nearest power outlets. It appears technically possible, but I'm not sure about the various virtual connections among VMs. In theory, each VM should be able to communicate with the other as if it was on the same network via the server data bus, but what about setting up firewall zones? Any internal I/O bandwidth bottlenecks? Any other potential "gotchas", caveats, issues? (Other than the obvious requirement of having enough CPU and RAM).Any thoughts or observations welcome, especially if they are from real world experience in a VM environment. BTW--in case you're wondering why I'm posting here, it's because I run Debian on all my workstations/servers (running VirtualBox as a VM for Windows XP on one workstation).
I have got a running mail server on CentOS5.4 Final using Zimbra free edition. . Assume that domain is organization.com.local And it is running fine with users created and bugzilla running on the same machine can send mails using this server. But it can obviously send messages to the internal users. There is this option to configure it to use external mail server to send mails outside the network but my external smtp server needs an authentication.Is it possible to configure it this way to use my external server to send mails from internal domain to say gmail?
View 15 Replies View Relatedi recently installed apache2 mysql php exc. to run a realtime stat site for my servers.the only thing is that the buttons/ images are not showing up.i checked that my GD was up to date and installed perl5 GD. dont know what else to check.my site with problems go to:http://24.20.177.228/stats_public
View 2 Replies View RelatedI am working on linux server with below specifications.Linux EDT 2008 i686 i686 i386 GNU/LinuxWhile checking the status of the server using the command 'opmnctl status' and when server is down the output is not getting redirected to file.I m using the command as,opmnctl status > abc.txt.
View 2 Replies View Relatedi have been trying to complete the following project1) Configure a FTP server where we can upload and download files.........2) server must run at 9 pm & stop at 9 am automatically ............although the first task was easy ,i have no idea how to accomplish the 2nd task(not to mention I'm a new user)
View 5 Replies View Relatedwhen I reboot the server with centos 5.5 the SMB deamon doesn't start?
View 2 Replies View RelatedI've two internet based server ( xx.xx.xx.xx and yy.yy.yy.yy ) The Y server is running VNC server and is responsible for answering to VNC sessions. But I need to hide the IP of Y server so I want X server to be as VNC Proxy and redirect all VNC sessions to Y server.
I guess the best way is to use iptables but actually I can't get it working so
I'm trying to setup RAID 1 on a CentOS 5 server for a zimbra email server.I get a partion schema error. Can I do this?The server is a HP Proliant ML150 G3 server with two 80GB HDD.
View 1 Replies View RelatedIm new in linux i want to configure my redhat machine as both router and transparent proxy!
View 1 Replies View Related
