Ubuntu :: Cpu Monitor Doesn't Continue To Update?
Apr 20, 2011
Over the past two weeks my laptop has started locking up at random. I thought maybe it was a thermal issue, because I have an upgraded hard drive (put in 2 years ago) and once a month or so I might get a heat related lockup. I keep my fans running at high speed and the laptop elevated now and don't typically have an issue.
The freezing has started to become a daily occurrence now, and yesterday it locked up three times. I am able to move my mouse (unlike thermal lockups where everything goes down) but unable to click anything. The entire display freezes, and my cpu monitor doesn't continue to update.
I finally ssh'd into my laptop and was surprised to see it responding just fine. htop showed that my X-server was at 100%. When I killed it, X restarted automatically and promped me to log in. Everything is fine after this until the next lockup.
When I don't have access to ssh I have to hard-shutoff the laptop. That can't be good on this 5 year old macbook. I have done my system updates in the past two weeks that may have triggered this, but I don't remember anything specifically. I've tried all versions of my kernel that are installed but nothing, I have the intel video and have not had problems with it up until now.
2$ uname -a
Linux macbook 2.6.32-30-generic #59-Ubuntu SMP Tue Mar 1 21:30:46 UTC 2011 x86_64 GNU/Linux
3$ lspci|grep VGA
00:02.0 VGA compatible controller: Intel Corporation Mobile 945GM/GMS, 943/940GML Express Integrated Graphics Controller (rev 03)
Can anyone suggest something to try? I'm not sure how to go back to older versions of the the video drivers, but I'm not even sure if that is the issue. I did add the following to /etc/apt/sources.lst after the lockups started occuring:
Code:
# X
deb http://ppa.launchpad.net/ubuntu-x-swat/x-updates/ubuntu lucid main #X-Updates PPA
deb-src http://ppa.launchpad.net/ubuntu-x-swat/x-updates/ubuntu lucid main #X-Updates PPA
and did a full update, but this hasn't helped.
I'm running Ubuntu 10.04 LTS
View 5 Replies
ADVERTISEMENT
Dec 25, 2010
In my tmp directory some logs are creating continue (with name logs.txt1, logs.txt2 up to 245). Some times these logs are creating continue within 1 or 3 second gap, now I want to write a bash script that continue monitor the tmp directory and if any time logs create simultaneously within 1 or 3 section gap it will alert me..( generally logs are create with the gap of 5 or 10 minutes duration or some time after one hours )
View 1 Replies
View Related
Jul 6, 2011
I'm just a newbie to this operating system. Even though I'm having some trouble, it still seems more sensible to me than Windows. I'd like to continue to use it, but I'd like to know why it doesn't work for me sometimes, and I'd like to see if I can't make it work better for me.
After I upgraded to 11.04 I've had a host of problems. My USB ports have intermittant trouble recognizing storage devices. My USB ports also have intermittant trouble recognizing my USB WiFi device. The VLC player will crash the Gnome Desktop whenever I use it. I still haven't figured it out.
I'm interested in the following question:
Why can't software and hardware that already works be insured to continue to work after an upgrade?
View 3 Replies
View Related
Jul 18, 2010
I have an issue with normal boot (fail safe boot doesn't have this problem). The boot process just stops and nothing happens, I just see the green background, the white lizard and no moving progress bar. I've given it about 40min without touching it, but nothing happened. If I press escape, the last log print says its mounting/mounted the hard drive. Not until I touch the head pad or press a key, it wakes up and the boot procedure continues. I once had a similar problem on opensuse 11.1 which could require much tickling before booting up completely. This was never seen on 10.3, 11.0 and 11.2, but now its back in 11.3.
View 9 Replies
View Related
Apr 10, 2010
I just installed F12 lastnight and I went to run updates and the update manager said that there were unexpected errors and could not continue. I tried again today and same results. There are something like 321Mb of updates to run so...would be nice to get this machine updated.
View 2 Replies
View Related
Apr 3, 2010
I installed Karmic on an older PC I had laying around, and the only trouble I am having is with screen resolution. It uses an old ATI chipset (onboard) for video, and it doesn't seem to do EDID correctly, so I can't display anything higher than 800x600. I have tried creating an xorg.conf, but it's still not working. How can I tell Xorg to ignore the fact it can't detect a widescreen monitor and display something larger than 800x600? I noticed the log says the sync's are out of range, but I am not sure how to fix it.
Here is my current xorg.conf.
Code:
Section "ServerLayout"
Identifier "X.org Configured"
Screen 0 "Screen0" 0 0
InputDevice "Mouse0" "CorePointer"
InputDevice "Keyboard0" "CoreKeyboard"
EndSection
[Code]....
View 1 Replies
View Related
Apr 20, 2011
Normally Update Manager always finds the update to the next version of Ubuntu. It still hasn't given me any notion whatoever. I allready changed the settings from regular to LTS, but nothing changes. There are updates to the kernel, but I cannot download them, so I'm kinda stuck here.
View 5 Replies
View Related
Jun 23, 2011
I upgraded from 10.10 to 11.04 and when i try to check for updates in the update manager it says:
W:Failed to fetch http://ppa.launchpad.net/and471/kaza...source/Sources 404 Not Found
, W:Failed to fetch http://ppa.launchpad.net/and471/kaza...amd64/Packages 404 Not Found
[Code].....
View 3 Replies
View Related
Apr 12, 2011
I have GNOME mplayer installed. Update Manager offers an update for it, "movie player for Unix-like systems," with the following:Changes for the versions:
2:1.0~rc4~try1.dsfg1-1ubuntu1
2:1.0~rc4~try1.dsfg1-1ubuntu1+medibuntu1
But when I tell Update Manager to perform the update it says,Requires installation of
[code]...
View 2 Replies
View Related
Jul 14, 2011
I have Update Manager set to check for updates on a daily basis but to prompt me before downloading or installing them. Because I have Update Manager set to check on a Daily basis, I expect that I will receive a prompt that an update is available no later than the day after the update is available (assuming of course I have my computer turned on). Yet I only receive a prompt days or even a week after the update was made available.
For example, let's say that my PPA of Google Chrome issues an update on Tuesday. Despite the fact that my ubuntu computer was on for a couple hours in the morning on Wednesday, Thursday, and Friday, no update prompt appears alerting me to available updates. If I manually open Update Manager on Friday afternoon, then the update is there and waiting for installation. But how come I don't get an automatic prompt that an update is available? Do I have my settings wrong or something?
View 9 Replies
View Related
May 11, 2010
The computer is used as a server and I connect remotely on it with VNC. It has no monitor. It was working fine until I upgraded to Lucid. Now, it only works with a basic vesa driver (800x600 max res). The log says:
NVIDIA(0): No display devices found for this X screen.
Screen(s) found, but none have a usable configuration.
If I plug a monitor, it work fines. Is there a way to disable monitor detection?
View 6 Replies
View Related
Apr 29, 2011
Before ubuntu can even boot I get this on my monitor Out of range set to 1280x1080 60Hz I get that a grub. I'm not even sure if ubuntu can even boot because my monitor won't let me see anything. I'm using the driver off the nvidia website, not the stock one that came with ubuntu.
View 1 Replies
View Related
Feb 18, 2010
I am experiencing a strange problem. I have two vga monitors and a ATI Radeon HD 3300 embedded on my motherboard. My embedded graphics card has a vga and dvi output. When I plug my monitors in (one uses a dvi to vga dongle) only the one with out the dongle gets a signal. I can swap which monitor uses the dongle and still only the one that does not use the dongle gets a signal (both monitors work, only if they are not using a dongle). Both Ubuntu and Windows are having trouble displaying video, but no trouble detecting the monitors (display settings show both monitors but do not tell me good resolutions for them). My friend has a different dvi to vga dongle, his only has about half of the dvi pins while mine has all the pins. Could the problem be that my dongle has all the dvi pins
View 5 Replies
View Related
Sep 14, 2010
I'm running 10.04 on a Radeon HD 4650 card with fglrx. The driver installation went without a hitch, and the log file contained no errors.
When I try to run
Code:
aticonfig --initial
i get the response
Code:
Found fglrx primary device section
Unable to find any supported Screen sections
Running
[Code]....
My best guess is that I have to write an Xorg.conf file, in which I say what type of monitor I have.
I cannot do that, as I need to shut down the Xserver in order to make it generate my xorg.conf file. When I shut it down I get the black screen.
View 3 Replies
View Related
Jan 24, 2011
first time poster after having read gobs of threads trying to find the answer to my issue here. I'll try to post as much information as I can, and then will supply whatever else is inevitably left out and deemed necessary. I'm running 10.10 on a Gateway MX3701 laptop which has an ATI Radeon Xpress 200M graphics controller (lspci | grep VGA) and am hooking it up to my Samsung P2770HD monitor/TV via VGA (VGA-0 port if that's important).
So, the issue: In resurrecting my old laptop by killing XP and putting on Ubuntu, I found I needed a VGA cable to connect to my monitor. Borrowed a friend's to get my setup going, and all was well in 1920x1080 with all the other monitor settings working well too (laptop monitor off, etc.. When my new VGA cable (cheap from Amazon) arrived and I shutdown, made new connection, and rebooted, my monitor was no longer recognized (it was before) and I am limited to weak sauce resolutions meant for my blinding grandmother.
So I've tried to find similar issues on here and have struggled to do so. I did find one thread that was similar, but the issue was never resolved.
View 2 Replies
View Related
Feb 17, 2011
Last night I was able to set up my server so that I can just connect vnc. I even was able to be connected at the log on screen so I could select which user I wanted to log in at. For some reason today, I have to have the monitor plugged in all the until the logon screen comes up before vnc will connect. Once the logon screen is up, I then can connect via vnc & select which user I want to logon as. It's odd because it worked last nigh, but today - Nope nada, it doesn't work & I can't explain why. I did clean up - Removing some applications I don't need on my server. (I'm hoping that isn't the problem) It's odd as well because I don't have to be logged on as a user to connect via vnc, I just have to wait until the logon screen is available...Then I can unplugged the monitor & logon.
View 1 Replies
View Related
Apr 29, 2011
Before ubuntu can even boot I get this on my monitor
Out of range Please set to 1280x1080 @ 60Hz
I get that a grub. I'm not even sure if ubuntu can even boot because my monitor won't let me see anything. I'm using the driver off the nvidia website, not the stock one that came with ubuntu.
View 2 Replies
View Related
Jun 1, 2011
I have recently installed Ubuntu 11.04 on my PC with these configuration:CPU: AMD Athlon 7750 Black EditionRAM: 2GB 1066 MHzVGA: ATI Radeon HD 3200 (on AMD 780G)After I installed Natty Narwhal I felt that my CPU runs at the highest clock all the time (2.7GHz), even if I don't have any program run. I tried all settings for AMD Cool'n'Quiet from mainboard BIOS, but nothing's changed. I installed "CPU Frequency Scaling Monitor" to manually change CPU clock. It recognizes two clock for my CPU, 2.7GHz and 1.35Ghz plus 4 other options; Conservative, Ondemand, Performance and Powersave but the CPU indicator doesn't change on every option!
View 9 Replies
View Related
Jul 16, 2011
I am running ubuntu 11.04. I am able to set my screen size to 1600x1200 in windows but ubuntu doesn't offer me that size in xrandr, though it says my maximum size is 4096x4096, I have posted my xrandr results below. What do I do to set my screen to the higher resolution?
Screen 0: minimum 320 x 200, current 1280 x 960, maximum 4096 x 4096
VGA1 connected 1280x960+0+0 (normal left inverted right x axis y axis) 0mm x 0mm
1024x768 60.0
800x600 60.3 56.2
[Code]....
View 3 Replies
View Related
Dec 31, 2010
I bought a Samsung 2033HD monitor and I connected it to my PC (ubuntu lucid) with the D-Sub cables (the blue ones). When I switch to the "PC" source (the screen supports also television) a blue notice reading "No signal" appears for a few seconds, followed by a black screen.
The screen isn't broken: I tried it on a laptop with windows XP and it worked fine!
View 3 Replies
View Related
Apr 19, 2010
i've installed suse 11.2 on an Acer laptop with Gnome 2.28 without any hicups. Everything working. External Harrdrive, USB Mouse & Keyboard. So been playing about with it and installed a Mac Theme which worked. Now I thought i'd start using the laptop through my Hannon 25 inch monitor, but i pluged it in set it to not display on the laptop only on the monitor and the monitor jsut displays wavy lines. Which i think is because it doesn't have the drivers for the monitor?
View 9 Replies
View Related
Feb 27, 2011
I've installed Linux suse 11.3 on my laptop, but the monitor doesn't work. my laptop is a VAIO one and it's graphic card is NVIDIA GEFORCE 310m, so
what should i do?
View 1 Replies
View Related
Jul 15, 2010
I have an Nvidia card and I am using ubuntu 10.04. Before installing the ubuntu nvidia restricted drivers, the boot screen with the ubuntu logo would cover the entire display area of the monitor. But now, after installing the Nvidia driver and fixing the display resolution of the boot screen with the Plymouth fix, the boot screen doesn't expand to fit the entirety of the monitor display area. How can I fix this? There is a good 2 inch off from either side of the display while booting.
View 3 Replies
View Related
Jul 15, 2011
I've got a fresh install of Natty on my Dell Studio 17 laptop. The screen on the laptop doesn't work so I have it plugged into my Panasonic TV with an HDMI cable. The only problem is that the TV is not showing the outer edges of my desktop. So, I can't see the "Applications" menu, for example, or the button to click to Logout. I've messed with every setting available on the TV and nothing has helped.Can anyone provide any advice? I've started messing around with xrandHere is the output of 'xrandr':
Screen 0: minimum 320 x 200, current 3360 x 1207, maximum 8192 x 8192
LVDS1 connected 1440x900+1920+0 (normal left inverted right x axis y axis) 367mm x 229mm
1440x900 60.1*+ 59.9
[code]....
View 1 Replies
View Related
Jul 19, 2011
I have an old computer (Pentium 4) without a monitor. To make the most of it I installed Ubuntu server on it and have been using it for almost a year. A couple of months ago I don't really recall what I did but since then it doesn't start-up unless a monitor was plugged in.
I've tried pinging it but it doesn't respond when no monitor is plugged in. meaning it's not even booting correctly.
I'd like to know what the problem is and how to fix it. And I'd really appreciate any help in diagnosing the problem. I just don't know where to start.
View 3 Replies
View Related
Aug 3, 2011
running top shows:
Tasks: 165 total, 1 running, 164 sleeping, 0 stopped, 0 zombie
Cpu(s): 3.5%us, 2.2%sy, 0.0%ni, 93.9%id, 0.5%wa, 0.0%hi, 0.0%si, 0.0%st
Mem: 3721884k total, 3376604k used, 345280k free, 107524k buffers
Swap: 3855356k total, 40k used, 3855316k free, 2013536k cached
but System Monitor tells me that only 33.9% (1.2gb of 3.5gb) is being used. Why is the memory used difference so great?
View 3 Replies
View Related
Apr 7, 2016
Debian Jessie does not detect one of my monitors (I have two) when I use the default drivers (nouveau) for my NVIDIA graphics card. It does work when I install the proprietary drivers, but then, after a couple of reboots, I get many problems (when I log in, it does not manage to load the desktop environment). I've tried this a couple of times unsuccessfully.
How to make the machine recognize the dual screen with the default drivers?
View 9 Replies
View Related
May 1, 2010
It used to work perfectly on Ubuntu 9.10 but I get "input not supported" in the secondary monitor.
View 9 Replies
View Related
Mar 8, 2011
Ubuntu system monitor applet doesn't show internet traffic although my wireless is working just fine. I use a conky to monitor bandwidth through vnstat and had no problem till I upgraded to maverick.
**ifconfig
wlan0 Link encap:Ethernet HWaddr 00:24:d2:c4:3e:da
inet adr:192.168.0.100 Bcast:192.168.0.255 Masque:255.255.255.0
adr inet6: fe80::224:d2ff:fec4:3eda/64 Scope:Lien
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
[Code]...
View 1 Replies
View Related
Jun 15, 2009
I just upgraded from FC10 to FC11 (32-bit) on an old Dell laptop. I set my power management settings (in Gnome) to turn the monitor off after some idle period but always leave the computer running and the hard drives powered. I also set my screen saver to a blank screen. I noticed that the screen saver does come on (turning the screen black), but the monitor back lighting never goes off. I tried different idle times for the power management settings (I usually set it to 1 min, but some other posts implied that 11 mins might work). I should also mention that this is after I've logged into a user account, not sitting at the login screen.
I didn't have this problem in FC10 (the monitor would actually turn off) so I figured it was a bug in FC11, but I can't seem to find a thread addressing this issue. I've found some what similar threads, but none mentioning this particular problem.
View 13 Replies
View Related