I have followed all the steps as mentioned on documentation.except automake (I am not clear as where to make automake)
I logged in as Root on a Ubuntu system and then
Code: cd /opt svn checkout svn://svn.lighttpd.net/lighttpd/branches/lighttpd-1.4.x/ cd lighttpd-1.4.x ./autogen.sh ./configure make make install
After this what do I need to do to be able to start the lighttpd ?After this I did not found any script /etc/init.d/lighttpd. so what more has to be done ?
Im trying to run synergy on startup. This works fine on the client, but it wont start automatically on the server. I put this line in an entry in startup applications:
I have setup a CentOS 5.5 server as a DHCP server. That will be it's only task in a Cisco callmanger VoIP environment The DHCP server that comes with CentOS 5.5 is from ISC V3.0.5 -redhat.
The server (HP DL360) has two physical NIC's of which only NIC1 is used (ETH0)
ifconfig shows:
Code:
The interface has a fixed IP setup.
My dhcp.conf file looks like this:
Code:
When I start (try to) dhcpd via the service interface or via the prompt as
Code: service dhcpd start
I get an [FAILED] message and the following is in /var/log/messages
Code:
But when I start the DHCPD on the comamnd prompt in debug mode it looks as follows:
Code:
and /var/log/messages shows:
Code:
Why does the system ask a declaration for eth0 0.0.0.0?
I'm configuring a new Centos 5.5 server in replacement of an old W2K server.The topology of our network is simple : one file/dhcp/dns relay server and workstations (PC's and some MAC's) plus network printers and scanners.All the workstations have dynamic IP addresses (easier because a lot of 'dynamic' changes : new persons with their own laptop, ...) and the server and printers/scanners have fixed IP addresses.I edited the dhcpd.conf (see here underneath), I have the file dhcpd.leases but it doesn't start !
i've made a big update of almost 300Mb.I'had a working DNS server.Now, when i boot the box, named works and it resolves all the clients.If i make any change (enter a new client for example) and of course i restart named (service named restart), named stop but does not start again !!!In order to get a working named, i 'm obliged to reboot the box?
what the procedure is to file bugs against slackware so I will post here. The rc.lighttpd I have works but the function to check if lighttpd is running has an exception when there's no lighttpd.
I'm trying to find how to schedule a process to start at a specific time (not on start up). How would I schedule a process/application to start at a specific time (if it matters, it will be a background process). For instance, have process abc start every weekday at 5am. I've done this for windows many times though have only been using linux regularly for a few months and haven't figured out the best way of doing this.
So far the best solution I have is to create a program that will start on boot and have it check the time and sleep until the required time and then start the required process(es) at the required time(s). But this seems more of a hack since I'd expect there to be a proper way of doing this.
I did a clean install of Ubuntu 11.04 64bit and the start up time is abnormally slow. If I start up the computer and don't press anything, the start up time is 30 minutes but it usually doesn't start up at all. It just boots into a purple screen, no splash, then it sits there and the computer doesn't have any loading lights flashing.
I had a similar problem with 10.10, but I assumed it would go away when I did a clean install of 11.04.
I can't get a read out of what's going wrong because when I press Esc it doesn't display anything, though weirdly it can sometimes get the start up process moving. I have also found that pressing enter really fast can sometimes help and something that seems completely oxymoronic, if I press the power button while it's starting up that can make it work, but nothing works every time.
I have a mysql database and i use it with apache for my webpages. And I guess it dosen't start when the computer starts so I have to manually start it with "sudo /etc/init.d/mysql start" This returns fail so i went to '/var/run/mysqld/' and the folder was empty. I don't know if this is the problem or not. How can I fix this?
I am using Rhel5 and I'm new to linux so pardon me for sounding a bit green around the ears.Anyway..I got an error message a few weeks ago about how the start up script that displays icons on the far right of my start panel was malfunctioning and it was going to be deleted from the start-up. didn't really know what it really meant and I just clicked ok.wireless eth0 status icon as well as my amarok status icon are hidden on the start panel. How do I get it back/add that script back to the start-up
I just moved my / from sda1 to an ide drive, hde1. i dont see how this could have caused any of these issues, but it did.
First my network card failed to start. i added a line in my rc.local file (where i put all of my additional programs, etc i want to start):/etc/rc.d/rc.inet1
The above now starts my network card with my static ip configured. dhcpcd also worked but i wanted this static.
Now samba will not start. i have the following line in my rc.local: /etc/rc.d/init.d/samba start
This used to work just fine. at first i thought that samba may be trying to start before my network card gets an ip, but the line is *after* the network startup line. just to make sure, i made an additional script called startsamba which contained a sleep 60 followed by samba start, to delay the startup of samba even further.
The message samba reports is very vague, something like failed - core dumped. most of the core dump log is garbage characters, but here is the beginning which seems like it might contain some info:
Code:
ERROR: Can't log to stdout (-S) unless daemon is in foreground (-F) or interactive (-i) after the system starts, i can drop to a console and type "/etc/rc.d/init.d/samba start" and the service starts just fine. i've also tried starting samba manually with "smbd -d" which also produces the core dump when started from rc.local, but not when started from a console after startup.
I want to monitor my work on the terminal.I know we can use script command.But every time when I start the terminal, I have to type script to start it.I want to automate it. So where should I include this command so that it will start as soon as I start the terminal ?
MY WORK TILL NOW: I have put this "script" command in the .profile.The when I start the terminal, it became an INFINITE LOOP.I am able to "echo".Thats coming only once.....but if I write a "script" command then it is becoming an INFINITE LOOP.
I've been fighting to get my wireless working and I've finally made some progress. I can actually manage to connect to my wireless network and so far it has been quite stable (fingers crossed).
However there is one slight nag. My wlan0 interface driver refuses to start at startup. When I type iwconfig its just not there. To fix this I have to manually run "rmmod rtl8187" and then "modprobe rtl8187". Then it works fine.
I've been trying to make a script to automate this but without success. I've tried both editing my rc.local and kde startup .xinitrc
How I could get those two commands to run automatically at startup after the boot process? I'm running Arch Linux and KDE 4.3
I use Opensuse 11 with fvwm. How can I get conky start automatically when I start fvwm?
I setup the conky under fvwm session for my Opensuse 11 but it won't start automatically. I am wondering how to write some kind of scripts to force it to start automatically and with a delay about 10 seconds after fvwm starts.
I just installed TuxGuitar - very cool - and to get the sound to work I had to install Timidity++ as well. Before I start TuxGuitar I have to execute:timidity -iA -Osin a terminal window first, which is kind of a pain to do every time I run TuxGuitar.How do I get this line to execute on startup such that timidity is running when I start up? I tried adding that line to rc.local
when i start the computer i will have 3 seconds to choose windows xp or else it will go on linux but someone told me that by changing the grub.cfg when i start my computer i will have 3 seconds to start linux or else it will be xp is this true ? and if it is can someone explain me how to do it because i would like that
I'm currently running SUSE 11.1 and trying to start Amavis so I can use Kmail. I have just run the latest updates via Yast. I'm getting the following when I try to start Amavis: /etc/init.d/amavis start returned 7 (program is not running):
When I am trying to run the Xserver using the command startx I am getting the below mentioned error
xauth: creating new authority file /oracle/oracle10g/.serverauth.22555 Fatal server error:PAM authentication failed, cannot start X server. Perhaps you do not have console ownership?
I am running CentOS 5.4 and Postfix. So when I start Postfix server than immediately maillog is starting to grow. And the first lines that I see in it are:
[Code]...
Server is already in several blacklists and I desperately need to do something.
I have one server with Jboss and Tomcat installed, I have to start these servers manually everytime I do reboot the server.How I could do to start Jboss and Tomcat automatically, when I do reboot the server?
I installed IBSng in ubuntu-server .but i can not start this server :Code:[root@myserver]# /etc/init.d/IBSng start.: 8: Can't open /etc/rc.d/init.d/functions"functions" file is in RPM base system . and ubuntu have not this file
I'm trying to move a mysql 5.1.50-community InnoDB database from one location to another.When starting the service I get:Starting MySQL.Manager of pid-file quit without updating file [FAILED]I've searched for a way to do this but I can only find people who describe what I've just done.
