I'm a Chinese user and installed ubuntu server. I choosed Chinese when installing and the console could display Chinese, but when finished installation and rebooted, the console couldn't display Chinese filename. Any body knows why and which terminal was used when installing?
View 1 RepliesI heard after I install debian, it could display Chinese information normally without any further work, but I have trouble to see all the Chinese characters.
So I googled and installed Chinese fonts, use dpkg-reconfigure locales to add Chinese support, but none of them work.
Here is my setup
# locale
#locale -a
I have no problems displaying Chinese characters in IE in Windows and I just switched over to Ubuntu.
I have gone to view-> Character Encoding and set it to simpified Chinese but the screenshot still looks like the attachment.
I see only squares. What should I do?
I update system today. Just before , everything is normal. Once it finished , I found that my KDE can't display some characters. I am a Chinese user. The English words are normal,. Just some Chinese characters can't be displayed. When I refreshed the browser, they can be displayed again but some of them are font default and some of them are font Yahei. And they are displayed messed together. It is not pretty. AND it is not only in browser, anywhere displayed Chinese characters looks the same as browser. How to change them back to default font as one font not two types of font messed together?
View 1 Replies View RelatedI have used Chinese simplified language as default language, at that time I can use gedit to open some chinese file, also at panel of gedit, there were Chinese like open blah blah.
After I closed it and open it again, strange things happened, there were no Chinese words at panel , and could not display Chinese.....
Later, i have tried to logout session and login with Gnome session and set the default language as Chinese. This time, file names , program names can be showed in Chinese perfectly, somehow for gedit, nothing has changed, and English panel, no Chinese can be displayed.
Is there a way to get Document Viewer to display Chinese characters in a pdf? Adobe Viewer does but I would prefer to avoid proprietary software. I cannot get either Document Viewer or Okular to properly show Chinese characters in pdf documents downloaded from my college class homepage.
I have all the Chinese language support files, bells and whistles (both traditional and simplified) loaded and operational. When I create a Chinese document in OO Writer and save it as a pdf, both DocViewer and Okular display the the Chinese characters properly. I just cannot get either DocViewer or Okular to display Chinese in pdfs that are downloaded from the website of my course's online textbook/workbook.
Running 9.10 full boat version on an EEE 1000HD netbook.
I just installed CentOS 5.2. I have both fonts-japanese and fonts-chinese installed. But I cannot see characters displayed correctly. All Chinese and Japanese characters are displayed as blocks of hexadecimals, except Japanese kana. How can I make them displayed correctly?
*** Appendix 1: /etc/X11/xorg.conf ***
# Xorg configuration created by system-config-display
Section "ServerLayout"
Identifier "single head configuration"
Screen 0 "Screen0" 0 0
InputDevice "Keyboard0" "CoreKeyboard"
InputDevice "Synaptics" "CorePointer"
EndSection .....
On Linux Mint FBReader (both the latest version and the one in the 10.04 repositories)displays Chinese characters as boxes(see screenshot) for some reason, but on Windows it works fine. Is there any way to fix it?
View 1 Replies View RelatedUsing Fluxbox, have tried this in XFCE and KDE. Chinese characters display properly in whatever browser I use online. I do need to see some in the file manager and this is not working.
I have installed the following chinese display files from Slack -
No results so far.
I've choice English as "primary language" in language configuration in Yast, and have also installed Chinese as secondary language.In most programs Chinese displays normally, like Evolution, Firefox, Dolphin, but in VLC media player and some other applications, Chinese couldn't be displayed properly.
View 8 Replies View RelatedWhen try to deployed squirrelmail, configured display language to "Chinese Simp" or "Chinese Trad", it could not display mail folder and reported "Reason Given: GB2312 character set is not supported." Checked locale/zh_CN[zh_TW]/LC_MESSAGES/squirrelmail.po, file charset encode is utf-8, also locale/zh_CN[zh_TW]/setup.php charset to utf-8, but at functions/i18n.php, it used charset of zh_CN/zh_TW to gb2312/big5. after changed it to utf-8, it working fine.However, all messages received is corrupted characters in chinese
Either the title is corrupted characters, or information is corrupted characters.
When i ssh to server using -X, i always confuse about which display number i should export. It seems to me sometimes the display number has been used by something, so what i can do is only
export DISPLAY=localhost:0 && xclock
export DISPLAY=localhost:1 && xclock
export DISPLAY=localhost:2 && xclock
[code]....
I'm a comp systems engineering student who's been running ubuntu on one of my machines for about a year and can do basic command line stuff but I'm stumped.I tried to hook a 2nd monitor up and ubuntu said it needed to install a pkg so I let it and then it said to re log in, I did. It now comes up acting like a terminal instead of a gui. I rebooted a bunch of times loading the old system snapshots (pressing esc during boot) and got kernel 2.6.28-15-generic to boot with normally which was great.But the only mouse that worked was the little button one in the middle of the keyboard and there was no sound and a couple of other funny things. Being more used to windows still I figured I'd reboot it from the same kernel and see if that fixed it. Now all of my kernel images act like the 2.6.31-19-generic one and only boot command line.I spent about 6 hours trying every command I could find in the man and help pages and consistently got three errors:1:failed to load apparmor2: Failed to fetch http://us.archive.ubuntu.com/ubuntu/dists/karmic- ... with about 30 different endings followed byTemporary failure resolving ' *.ubuntu.com'3: RuntimeError: could not open display
View 2 Replies View RelatedI have downloaded a command line version of Ubuntu so I can install everything I want almost from scratch. Problem is, when I install an x display manager it wont let me login. It just flashes for a second with a cross, then returns back to the login screen...stuck in a loop."sudo startx" works but not "startx". I have tried lxdm and xdm.
View 1 Replies View RelatedI currently using Ubuntu 10.04 LTS.Whenever I try installing any new package(*.deb) it will display red error message that I don't understand.What happen? and how to solve this problem?
View 8 Replies View RelatedI have reloaded windows xp and now after installing ubuntu latest version, I get a boot menu that gives options. if I select the Ubuntu option, within a few seconds(2)the monitor shows "out of range"! However it is possible to get a command prompt from this menu,(Grub)by pressing "C" then Tab, which lists about 30 commands! But I cannot find what command will overide the ubuntu boot display setting! yet if it is possible in the disc boot F6 menu, then it follows that it must be possible in the hard disk boot menu? (ie nomodeset available on the disk F6, so using F6-nomodeset on the disk allows me to install or run from the disk, which then runs perfectly) Only I cannot make changes in the Ubuntu live that runs direct from the disk, to the installation on the hard drive. My Monitors Max is 75hz 1280x1024, LCD. And although not the latest model, Its still relatively current. Windows from the boot menu works fine.
View 1 Replies View RelatedMy computer boots up but just as its about to load debian I lose video output. Where do I start with troubleshooting this?
Also there was an option to install debain as "graphical installation" or just "installation". I chose just "installation", whats the difference? I dont know if that has anything to do with why i cant get output.
Im running Ubuntu 10.10 on an Nvidia ION gpu. I've installed the latest driver using the built in driver tool and by downloading from nvidia. Both times this has been the result at every resolution:[URL]
View 3 Replies View RelatedI just installed Ubuntu last night parallel to windows vista ultimate (no problems). My biggest problem is that when I tried to install the nvidia display drivers, I somehow downloaded a server based driver (and am having amazingly difficult problems). I use a dual monitor set up (both are plug and play LCD displays) and i'm not too worried about aesthetics but rather, performance. I downloaded the correct driver but now I don't know how to install it. Is there a way to uninstall this server driver?
View 1 Replies View RelatedI have a laptop that doesn't display correctly since installing F10 x86-64. Instead of using the i810 driver, I see the experimental intel driver. I am running on a Dell D630 laptop with the default intel integrated graphics.
Just to note: Running gnome. I tried KDE and I can actually get this to work and display in 1600x1200. I don't want, "well use kde then" to be the solution. Also, in gnome, if I go to the screen resolution option from the menu, the mirron screens is clicked. Even when I detect monitors and unselect the mirror screens and pick the correct resolution, when I click OK, the screen flickers, and I go back to the same screen with the original default values? Wierd.
I got the bright idea to install system-config-display (something like that), which installed fine. I then changed my default resolution to 800x640 just to try it (really want 1600x1200). Well, I decided to reboot. Not the laptop doesn't start, it stops right after loading anaconda, and just won't go any further.
So two questions:
1. What do I need to change to get the laptop to actually boot?
2. How to get the external monitor to display in 1600x1200.
I'm writing this post from the BT5 Live CD. However, after install and reaching a CLI (on the HDD), when I run startx, my monitor simply displays 'invalid format' (obviously this works fine via the LiveCD)... I've installed Ubuntu and Fedora a few times on a few machines, and have never had any issues with the display... not sure where to start troubleshooting.
View 4 Replies View RelatedI bought a new laptop 2 months ago, with a GeForce GT 335M VGA and win 7 preinstalled. I installed in parallel Ubuntu 10.04 64 bit but face the following problem When I activate nvidia driver from the "hardware drivers" tab ( it gives me only one choice ,to install :version current" driver ), I get after restarting, my screed divided in 4 quadrants with something like a corridor in the middle ,each quadrant showing a tiny ubuntu log screen Only after uninstalling it or booting in graphics fail safe mode I get a normal screen again but then, google earth e.g runs slowly and complains that it works in open gl mode or something like that.
May be its only that the VGA card is new and there is not yet a proper driver for it? Or should I try some changes in some configuration file? I have tried the advices from [URL] but it didnt help . In win7, the card works fine but ....
I am trying to install a ubuntu server to serve sites. More than one, so Ill use Apache VirtualHost.When installing ubuntu server ask me about installing DNS Server? do i need it?
View 6 Replies View RelatedI have a Compaq Presario CQ60 laptop with an Nvidia 8200M graphics card. When I try to enable visual effects I am asked to install the Nvidia restricted driver. When I do this and reboot, I get 6 copies of the Ubuntu screen on my display. Does anyone know what is causing this? I'm not sure which version it installed, I assume either 173 or 185. I have downloaded version 190 from the Nvidia web site. Should I install that version? If so, it is a .run file, how do I install it?Also, how do I reinstall the old driver. I fixed the problem this time by reinstalling Ubuntu, but that will get old if I have to do it too often.
View 4 Replies View RelatedI've been installing Debian Stable on a IBM Thinkpad R60 with SXGA display. Running the system works for around 10-30 min, after which period of time there begin screen distortions, which last for always few seconds only. Working can be continued in the time between these distortions.
Running Ubuntu 11.04 for testing has brought up none of these problems. I have enabled "nomodeset" as a kernel parameter, but without success.
Just finished wiping and re-installing F12 From a DVD on an Dell Inspiron 9300 with a NV 6800. The NVidia site driver refused to install, so I used the method documented here
[Code]...
as instructed to in the sticky. On rebooting, after the load animation, the screen goes blank/black. If I click around, I can hear some beeps from the OS so I assume that things are running but i just can't see anything.
I wanted to installed Skype on Mandriva 2009 x64, but qt4 was a pre requisite so I installed it first (from the control panel). I still got an error when trying to install Skype (downloaded rpm), so I tried to reboot. However, now I just get a black screen instead of a login prompt. I have had a lot of issues with X11, but I usually get at least a prompt, I don't even get that now. Just a black screen... If I hit ctrl+alt+F2 I can log in as root, and I tried to start x, but I get a message saying there is a problem with D-sub.
View 3 Replies View RelatedI installed the new debian_lenny_5.0.1_amd64 x64, i am having a nVidia Geforce 8500 GT 512 RAM display card. I was trying to install the driver using the synaptic package manager. I installed them, but i was not able to use the driver. I don't know where the drivers are installed and how to use it. I checked the xorg.conf , and the nVidia driver is not listed there. how to install them .
View 9 Replies View RelatedAs the title says I have a problem with Windows 7. After installing openSUSE 11.2 on my Dell v1320 laptop Windows cannot initialize the device driver for its display adapter ( Code 37 ). The Dell Touchpad also couldn't start (Code 10). I have reinstalled an older version of the Touchpad driver from Alps and it didn't work. I also tried system restore but that didn't work either.
View 9 Replies View RelatedI can see and edit chinese file in console by
vi testfile
I also can gedit the testfile and print it in chinese perfectly. But I can't see the chinese by cli to print file , can only see some small rectangles to instead.
lpr testfile