I have no problems displaying Chinese characters in IE in Windows and I just switched over to Ubuntu.
I have gone to view-> Character Encoding and set it to simpified Chinese but the screenshot still looks like the attachment.
I see only squares. What should I do?
I update system today. Just before , everything is normal. Once it finished , I found that my KDE can't display some characters. I am a Chinese user. The English words are normal,. Just some Chinese characters can't be displayed. When I refreshed the browser, they can be displayed again but some of them are font default and some of them are font Yahei. And they are displayed messed together. It is not pretty. AND it is not only in browser, anywhere displayed Chinese characters looks the same as browser. How to change them back to default font as one font not two types of font messed together?
View 1 Replies View RelatedIs there a way to get Document Viewer to display Chinese characters in a pdf? Adobe Viewer does but I would prefer to avoid proprietary software. I cannot get either Document Viewer or Okular to properly show Chinese characters in pdf documents downloaded from my college class homepage.
I have all the Chinese language support files, bells and whistles (both traditional and simplified) loaded and operational. When I create a Chinese document in OO Writer and save it as a pdf, both DocViewer and Okular display the the Chinese characters properly. I just cannot get either DocViewer or Okular to display Chinese in pdfs that are downloaded from the website of my course's online textbook/workbook.
Running 9.10 full boat version on an EEE 1000HD netbook.
I just installed CentOS 5.2. I have both fonts-japanese and fonts-chinese installed. But I cannot see characters displayed correctly. All Chinese and Japanese characters are displayed as blocks of hexadecimals, except Japanese kana. How can I make them displayed correctly?
*** Appendix 1: /etc/X11/xorg.conf ***
# Xorg configuration created by system-config-display
Section "ServerLayout"
Identifier "single head configuration"
Screen 0 "Screen0" 0 0
InputDevice "Keyboard0" "CoreKeyboard"
InputDevice "Synaptics" "CorePointer"
EndSection .....
On Linux Mint FBReader (both the latest version and the one in the 10.04 repositories)displays Chinese characters as boxes(see screenshot) for some reason, but on Windows it works fine. Is there any way to fix it?
View 1 Replies View RelatedUsing Fluxbox, have tried this in XFCE and KDE. Chinese characters display properly in whatever browser I use online. I do need to see some in the file manager and this is not working.
I have installed the following chinese display files from Slack -
No results so far.
What command could I use in terminal to delete all ASCII characters? That is, delete a-z, A-Z, 0-9, and all punctuation? I have a file containing Chinese characters, and I want to remove everything else and leave just the Chinese.
I can use grep to leave only the lines that have Chinese in them, but this still leaves a lot of non-Chinese stuff on those lines. Does anyone know how I could actually remove everything that isn't Chinese?
This is to do with accessing Dos era CD rom under Linux.The characters in directory and file titles appear as "chinese".As I know that I've loaded and installed programs from these CD roms onto a Windows 2000 machine, I'm wondering why I can not read the file names now. They are definitely in English.I've research and found the mount -o "characterset" but I shouldn't need to do that as they are not foreign language CD roms.The only other thing I can think off is that they are both degraded, but I would not have expected that of commercial CD roms.
View 5 Replies View RelatedMy installation of slakware linux 12.0 seemed Ok, I can see the beautiful KDE Window and I can also read Chinese homepages by Foxfire browser. But I don't know how I can input Chinese characters. I in fact installed everything from the DVD-package. It appeared that SCIM was installed, and I don't know if I have CLE.
View 1 Replies View RelatedI am a starter ,though there are lots of software installed almost for everything, I found that it is uneasy for a Chinese learner to use it.Almost every PC user prefer sip to linux around me. it is likely that there is still a long way to go.but I have every confidence in myself! one of my question is:Why my pdf reader does not support Chinese characters?What should I do to improve this situation?
View 6 Replies View RelatedWhen try to deployed squirrelmail, configured display language to "Chinese Simp" or "Chinese Trad", it could not display mail folder and reported "Reason Given: GB2312 character set is not supported." Checked locale/zh_CN[zh_TW]/LC_MESSAGES/squirrelmail.po, file charset encode is utf-8, also locale/zh_CN[zh_TW]/setup.php charset to utf-8, but at functions/i18n.php, it used charset of zh_CN/zh_TW to gb2312/big5. after changed it to utf-8, it working fine.However, all messages received is corrupted characters in chinese
Either the title is corrupted characters, or information is corrupted characters.
I heard after I install debian, it could display Chinese information normally without any further work, but I have trouble to see all the Chinese characters.
So I googled and installed Chinese fonts, use dpkg-reconfigure locales to add Chinese support, but none of them work.
Here is my setup
# locale
#locale -a
I'm a Chinese user and installed ubuntu server. I choosed Chinese when installing and the console could display Chinese, but when finished installation and rebooted, the console couldn't display Chinese filename. Any body knows why and which terminal was used when installing?
View 1 Replies View RelatedI have used Chinese simplified language as default language, at that time I can use gedit to open some chinese file, also at panel of gedit, there were Chinese like open blah blah.
After I closed it and open it again, strange things happened, there were no Chinese words at panel , and could not display Chinese.....
Later, i have tried to logout session and login with Gnome session and set the default language as Chinese. This time, file names , program names can be showed in Chinese perfectly, somehow for gedit, nothing has changed, and English panel, no Chinese can be displayed.
I've choice English as "primary language" in language configuration in Yast, and have also installed Chinese as secondary language.In most programs Chinese displays normally, like Evolution, Firefox, Dolphin, but in VLC media player and some other applications, Chinese couldn't be displayed properly.
View 8 Replies View RelatedI've installed 11.4 KDE x86-64,which downloaded last night,a GM version. Things working great except 2 thing : SCIM & wifi.SCIM Chinese input works great when 11.3 KDE,but in 11.4 KDE it ONLY works in Dolphin,not works in Firefox.........
View 5 Replies View RelatedI am having issues with displaying Asian characters when using the $ tree command. I have tried changing it via Terminal -> Set character Encoding -> Unicode (UTF-8.) in terminal options.I have also tried changing it to various other Asian encodings as well.Asian characters do display correctly in Pcman, Firefox, Leafpad and Terminal if I open Terminal from Pcman. When I try the command
[code]....
I recently intalled Debian lenny and I'm having issues with some of the unicode characters. Instead of displaying the symbols properly it shows one of the following depending on font/app:
1) Square outline with four letters/numbers arranged inside
2) Just a blank square outline
3) Just a blank space
I haven't been able to test all possible characters, but from a quick check it seems that Cyrillic works properly, Japanese doesn't.A few Google searches later and I'm no wiser on how to fix the issue. Any help?
I have a weird issue in Firefox on Ubuntu 10.10, and sadly it's a periodic mistake that I don't know how to initiate... Sometime in firefox some of the characters seems not fully rendered, and as I recall it can also happen in menu fonts sometimes. In the attached screen-shot you can see that it's the a character that has the problem - but only for one font type or? But I have seen this with most characters I think - and as stated this happens randomly.For instance right now I looked again in the tab in firefox where I just 5 minutes ago did the screen-shot and now all characters are correct?? I have tried to reload or even restart firefox when it occurs, but this is now guaranty for a solution... When it happens it makes many homepages unreadable
View 9 Replies View RelatedI've been seeing things like this in Firefox since installing:
Franais
Espaol
where the is a special/accented character. I've also been seeing the in places that seem likely to have some kind of quote mark, probably curved quotes. I can see straight single and double quotes. To correct this, I've tried changing the display font and the character encoding. I've also looked at the Mozilla Add-On site to see if I could find a plug-in to fix it, to no avail.
What should I try now? Currently I'm using Liberation Sans with UTF-8. I'm a native English speaker so I need a western encoding (I think), but I'd still like other characters to display properly.
Firefox is having trouble displaying characters. At times, a web page will display only partial of a certain character, and it will affect every character on the screen. In other words, sometimes when I load a page, the bottom half of all the 'i's or 'r's are missing. The problem persists when I refresh the page, and resolves on its own. It will happen to most web pages. Also, at times, a white or black stripe will run through some characters, usually a heading title on the page. I'm running Firefox 3.6.10 on Ubuntu 10.10. I did a complete reinstall of Ubuntu 10.10 when it came out (i.e. I reformatted and installed 10.10) and have been having this problem since then. Never had the problem with 10.04, which I had been running since May. Firefox and Ubuntu are both updated currently.
Please note the attachments, where in one there is a problem with the letter 'i', and in the other, on the Heading "Search New Posts" there are white lines running through the words.
I'm testing HTML5 for the first time, using Firefox (beta) 4.0b8 and SeaMonkey (beta) 2.1b1, and its ignoring some CSS. Specifically, I have problems with the <details> tag. (It is nested in a paragraph...I am using it to provide an in-paragraph definition in hopes it can be toggled.)
Firefox only partly supports <details>. It's not supposed to show anything except the content of <summary>, unless you click on <summary>'s content. Instead, it puts a line break before the content of <details>, splitting the paragraph in two peices (which looks silly), without the "closed/open" functionality.
So I tried using "display:inline" in my CSS, but that gets ignored. Just for fun, I also tried "display:hidden" (also ignored) and "display:none" (obeyed).
SeaMonkey doesn't doesn't do anything special with the content of <display>...but it also ignores the same CSS as Firefox.
The only thing I can do to support semantic design is apply "font-style:italic" to all <details> elements.
Granted, you might ask, "why bother using <details> at all. then?" Well, I would like to have <details> for the browsers that support it, with the "font-style:italic" to degrade the page nicely for those that don't (such as for SeaMonkey).
Does anyone know why "display:inline" and "display:hidden" get ignored?
I am using ubuntu10.04-server 64bit AMD with fluxbox. After I ran Matlab in a shell (without GUI) the shell does not display characters anymore, but will execute any command, I just can't see the characters that I'm typing.. I use aterm and xterm, does anybody know why that is, am I missing a package?
View 1 Replies View RelatedWhile modifying the definition of my PS1, I saw that "[" and "]" markers should be added to help bash to compute the right display lenght. Many exemples on the web do not use them or even mention them.I searched for a solution to add them automatically, like with sed, but I didn't find any example.Are they still needed and is there a recommandation not to use sed to define PS1?
View 1 Replies View RelatedI have my OpenSuse 11.1 box set up with utf-8, however, every time I try to open a file with utf-8 characters with vi it can't handle those characters properly.
View 6 Replies View RelatedI don't use Firefox much, my default browser is Google Chrome. But I've noticed sometimes things like Flash on some sites runs smoother in FireFox. So yesterday I opened up FF because Facebook was giving me some issues, so i wanted to see if it was Chrome or FB. Now, I haven't run FF in a few weeks, and I've noticed a few updates had rolled in for it since my last use.
When I opened FF and went to FB the login page wouldn't display correctly, and in fact would display no text whatsoever except for the links for the Japanese and Chinese FB pages. I assumed it was FB since I was already having issues with it. Later, I tried again and got the same loading issue. So I ran a Google search for FF issues with FB and got the same problem with Google search results, I got the logo and all the little search icons, but no text.
I tried everything I could think of and everything anyone I asked could think of including:
The only thing that I can do to make FF work is run Alt+F2 gksu firefox. That allows it work with out any issues. Has anyone come across this issue or anything similar? I'm including a couple screen shots of what it looks like when it's not working correctly. Note: these pages have finished loading, the text isn't "white on white" it's just not displaying, view source of these pages shows the complete page is loaded including all text it just isn't being rendered.
how can I set DISPLAY command to run Firefox on say tty1?
View 4 Replies View RelatedRight now I'm getting little boxes with hexcode instead of text-critical marks in my Greek texts that have been marked up. Also, I can't get xml to display in my firefox browser. What am I missing? Shouldn't Firefox parse xml and display something like an html page?
View 2 Replies View RelatedFirst of all I want to say that I'm new to Linux. I am using Ubuntu 10.04 LL and i want to create a html page, in terminal mode, but firefox does not display it correctly. i used this tutorial, http://linuxcommand.org/wss0030.php , but it seems that whatever i do, when i run the page with firefox (x@ubuntu:~/bin$ firefox page.html), the page displays the #!/bin/bash line, it doesn't interpret variables, reserved words, or any other special characters ( $, <<- ). I've tried to change the encoding in firefox from Unicode-8 to Unicode-32 but no luck
View 9 Replies View RelatedI'm having trouble getting the usual display in firefox as I had in fedora 12. Here is what my fedoraforum.org page looks like: By twohot at 2010-07-19
I suspect something is wrong with the interpretation of "sans, sans-serif, serif ... etc" within fedora but i don't know how to go about fixing it. I'd like to leave the default settings in firefox as this has been the case in previous releases.