i am new at ubuntu but at random times it will go to a blank screen with a cursor in the top left that doesnt blink. Cant do anything after that. I did all the updates and I am on an Acer Aspireone the mini computer.
View 4 RepliesI have windows 7 + Ubuntu 10.04 in dual boot, I noticed that sometimes the ubuntu was not booting.
Right after I select the os in grub (ubuntu) the screen goes black with the blink cursor and nothing happens, that's all no messages it's stuck there forever.
Today, it does this every time I try to enter Ubuntu, it's just stuck there.
I have here two old identical compaq pc's with 64mb ram.I want to copy drive/os from one machine to other. So i do a drive to drive clone (witn both hd's deing connected to another machine). And it says its done and okay. But the second (cloned) machine doesnt boot. And have the black screen with the blinking white cursor in top left corner. I have already tried to do fdisk /mbr and also copying partition table from original to destination disk. Because i think it is logical that with a drive to drive clone it sould be copied. But i have a doubt in that somehow. Because why would it not boot if it was copied then
View 9 Replies View RelatedI have a problem - after installation of Ubuntu 9.10 I discovered that I do not have virtual terminals on my computer. When I am trying to switch, to another virtual terminal with, say, Ctr-Alt-F2, I am getting a black screen with lonely cursor blinking in the upper left corner (no login prompt).my tty2.conf file is
Code:
# tty2 - getty
#
# This service maintains a getty on tty2 from the point the system is
# started until it is shut down again.
start on runlevel [23]
stop on runlevel [!23]
[Code]...
I have rebuild my system, with an Asus motherboard M4A88TD-V EVO/USB3 with radeon 4250 integrated 8 Gb memory
Athlon II 4x 640 2 x 1 TB sata3 WD Harddisks I installed 10.10 64bit, and ran through the whole install with the alternate CD without problems, Installed grub in the MBR on the 120 Gb partition for 10.10, it even recognised my 2 3ware pci raidcontroler on which 8.04 is installed.
When I start I get grub, when I choose for 10.10 I get a black screen with a cursor blinking in the left uppercorner. Luckily I can start into 8.04. I have no idea how to continu. for now I will burn a knoppix cd so I can read the ext4 partition with 10.10 and hope to find something to solve this.
I'm running an Acer 1810Tz, dual boot with win7.Under 9.10 and Grub I had no boot issues, however I have just completed the upgrade to 10.04 and upgraded GRUB to GRUB2.Everything boots just fine into Ubuntu, and my GRUB menu looks right, but when I select the Windows 7 option, the machine just hangs with a black screen, white cursor top left. I'm sure this is a trivial problem, something overwritten that shouldn't have been perhaps, but I have no clue where to start.
View 6 Replies View RelatedI have XFCE and xorg-server-1.7.7 in slackware64-13.0. I have my keyboard set up in xorg.conf. X ignores that and takes info from hal. So I have a US keyboard, when I have a UK/IE keyboard actually. When I added openoffice, i found I was getting double letters am getting double letters all over the place, and the cursor blink has slowed too near zero. So when I want to remove them again, the mouse will not land the cursor in the middle of a word to delete the extras. An average of 3 double letters are happening each line. Mouse sometimes works to remove them, usually not. I have set 'repeat delay' at maximum, 'repeat speed' & 'blink delay' at minimum. No effect. Disabled key repeat - still happens.
View 5 Replies View RelatedThe day started as usual until I got the very bright idea to install Ubuntu. A new OS along side W7, that sounded great. I checked some guides on the Internet, it was all very straight forward. Install it and Grub will show you the OS:es when you boot up. I installed Ubuntu, rebooted. After the BIOS messages the screen goes blank and my screen on-button begins to blink, as if trying to find a signal, I press enter, it reboots instantly. After BIOS messages I get to a screen that says "GRUB error: uknown filesystem grub rescue>"
I've looked through everything here and nothing works. I've tried to fix the mbr-thingy using Windows Repair and even though it says "one partition was updated with new boot-thingy" when I reboot, I get into that very same grub rescue. I think my setup has something to do with it. I run RAID0 (2x360Gb hard drives), first having C: at 50Gb and then the rest as F: for programs and such. What I did was that I shrunk the F: part and then used that as partition for Ubuntu. Also please have a look at these screenshots, my partitiontables and such seems completely wacky to the raid: Where should the boot-loader go? I'm very, very new at this. I've had Ubuntu Netbook remix on my netbook for a time but still treat me as an utter beginner.
Im running netbook remix on a eeepc 1005ha. It is my only OS and Im loving it except for one obnoxious quirk. It randomly cuts text and randomly pastes it. If there is something in the clipboard, it will usually paste that, but just as often it will cut random text and paste that. The pastes occur when the cursor focus jumps back to the location of the cursor on the screen. I dont know a better way to phrase that, but thats what it is doing. Say... I put the cursor over the word "pastes" in the paragraph above... even though Im typing in this paragraph, the focus will "jump" to the cursors physical locale (the word "pastes") and then paste whatever is in the clipboard. If the cursor is outside of the textbox, the page will jump to the bottom.
This behavior occurs across programs and in any place text can be entered. I can find no rhyme or reason for it... it just... happens. Sometimes even when Im away from my computer, so its not like Im hitting some key on accident. I have loved everything about this ubuntu distro, but this issue is just toany obnoxious. Writing psych papers on this thing is going to be near impossible if I dont get this fixed before I go back to school.
I would like to use two monitors with my desktop, so connected them the other day and it worked straight away, which is good but... The monitor configuration app always want the primary monitor to be on the left hand side, thus it always extend my desktop right. Can I do anything to extend my desktop to the left instead of to the right so I can have background application on the screen to the left?
View 8 Replies View RelatedI've got a problem with my Arch flashdisk. When I start xorg, my mouse cursor keeps moving left until it reaches the edge of the screen, where it stops. I checked the connector, etc., but it didn't help, so I guess it's software-related.What can be causing the problem?
View 2 Replies View RelatedThis issue was solved On June 9th. Root cause was Kore 2 controller device being misinterpreted as a pointing device. I hope to eventually use the Kore as a straight-up MIDI controller in Ubuntu Studio, but that's a long way off. For now I will unplug it whenever I boot Ubuntu Studio. XINPUT LIST gave me the hint I needed to figure this out. Original post and problem resolution thread follows:
I'm a total Linux newbie, but well versed in Windows. Just installed Ubuntu Studio 10.10. This was a clean install, not an upgrade.. Installation went fine, but when I boot into it, I get the cursor stuck at the upper left corner of the screen. When I move the mouse, the cursor will move, but it immediately jumps back to the upper left corner. I can't select anything except to open the main menu. Then I must use keyboard cursor control to navigate.
[Code]...
For some reason the mouse curser starts out in the middle of the screen after booting as normal but as soon as i move it, it gets stuck in the top left corner of the screen.It still responds to clicks and i can sometimes see it "wants" to move but itets repositioned into that corner.he problem exists in the live-cd session as well as in the installed session.I looked into the Xorg.0.log file and it said something along the lines of:Code:HID XXXX:XXXX: failed to initialize for relative axesI suspect this to be the culprit, yet i've never had any problems with the mouse in any other operating system (writing from kubuntu 9.10 right now) and i've used most of the popular ones.Is there anything i can do about it? Seems that X is doing things differently in Fedora... There's got to be some switch or something.
View 1 Replies View RelatedI finally got around to installing Fedora 15 on my HTPC. I noticed that the mouse cursor starts in the upper left corner of the screen as soon as the login screen appears. This means that after login, if I only used the keyboard so far, the Gnome Shell overlay starts immediately.This is at most an interesting quirk until I try to set XMBC to automatically launch. Now I have to press <Esc> or move the mouse to de-activate the overlay before I can use the program.Is this mouse cursor thing intended behaviour, is there some software fix, or is it a hardware quirk? I have a Radeon HD 4650 graphics card (Smolt profile).
View 1 Replies View RelatedAfter playing one of the kde games in squeeze- breakout - which I had a hard time exiting - and even after I restarted the computer the cursor will not go to the lower left corner of the desktop, where the kde menu button is.
View 1 Replies View RelatedTwo days ago, the down arrow cursor key quit working on my usb keyboard. I could go up, or left and right, but not down. I figured the key was broke and pulled out a PS/2 keyboard and plugged it in. Problem seemed to be solved.This morning, the down arrow cursor key again was not working. I thought that was a weird coincidence, so I plugged in the old usb keyboard, and the down arrow cursor key was again working!
View 7 Replies View Relatedi somehow screwed my xserver (I guess it is the xserver). I got the following problem:
1) When i have 2 monitors connected, the cursor stays at the left one even though i select text on the right one.
2)(i plugged the left one out)As soon as i open a window and click on something in the window the window cannot be moved anymore, and the desktop cannot be selected anymore either (though u still can do something inside the window), as soon as you close the window (if you are lucky and there is a "close" button) the desktop can be used again.
This all started when i played a flash game which froze like everything but the game, and i had to restart the computer. I guess it somehow screwed the .conf file or the xserver. I already tried the xorg.conf.backup but it didn't help!
I set my drives up with MY boot loader, and I boot several OSes.I installed Ubuntu and told it to place grub on the / drive, which is where I always put it with any other install and it works fine.I find now that despite telling the install where to put it, you guys have taken it upon yourselves to alter the MBR of the volume ANYWAY!
SO, what I need to do is re-install grub, but I see that you also have no repair facility on this disc either. All I want to do is use MY boot loader. Currently, when I point at the / volume it just hangs with a non-blinking cursor in the upper left.No other Linux installs I have performed over the years do this. I want the drive to boot by merely pointing my bootloader at that volume.It always has in the past, so what did you guys change? I want NO action on my MBR, but I DO want a working grub on the actual root volume, which is NOT the first volume on the drive.
What does it mean if you boot from a live CD, the CD spins, a screen appears with the keyboard and human icons at the bottom, then a blank screen appears with a blinking cursor in the upper left corner - and that's it? It just stays that way.
I've tried two different discs, one 10.04 and one 10.10; and two different disc drives.
I running 1 pc touchsmart IQ816 (windows7, standalone) and a sunfire server (fedora 14, standalone).Because my touchsmart screen doesnt support dual screen input, i'm reaching my server true vnc. Is there a beter way (VMware?) to handle this problem?Im new in VMware: Can a esxi server from vmware help me out in this situation?
Do some people have experience on this?
I installed Ubuntu 11.04 today as the main OS on my laptop.I had deleted my XP partition, and repartitioned it according to a guide I had found. (http:url)......Basically it was setup like this: 500mb ext2 primary partition, has the grub folder, I believe this is either the '/' partition, or the '/boot' partition 2gb swap space logical partition
10gb ext4 logical partition -- this is either the '/' or the '/boot', it contains the 'bin,boot,cdrom,dev' etc folders 243gb (the rest of my hard drive, with the exception of a partition that contains documents and files from my XP OS, formatted to NTFS) ext4, this is the one that has all my desktop/documents/etc folders.After Ubuntu was done installing, I had some message pop up about installing an ATI proprietary driver for my ATI graphics card (an ATI Radeon HD 4330, I believe, I may have messed that number up). I installed it and rebooted, no problem.
Next, I had another update window pop up with 198 items checked and ready to download and install. I went through all of this, and rebooted, again, no problem.Next thing I did was install some apps that were essential for me to have to use for my work (an ide, chat programs, etc). No problem with any of that.Last thing to install was the OSE Virtualbox, and then I installed WindowsXP Pro and Windows Vista Business, then installed the guest addition addon for VB. This all worked without any issues whatsoever.
Time goes on, and I notice my computer is heating up much more than (seemingly) normal. I begin to wonder if its my graphics card. So I shut down the computer and let it cool down. Reboot, and no problem, still working fine.Then I opened a couple of apps and tried a simple game (can't remember the name) I believe it was a simple 3d topdown, as I wanted to test my graphics card. This is where things seemed to start to go wrong. My laptop began hanging, not even allowing me to access the terminal via ctrl+alt+f2. The screen flashed and I saw the blue/green/grey fuzz that I get when the graphics card is starting to heat up too much. Then everything hangs and I can't do anything at all, including move the mouse. I did a hard reboot (I believe this is what you call pulling the plug/pressing the power button, correct me if I'm wrong). I then rebooted, saw a chkdisk, then it booted seemingly normal, but it hung right after the purple screen after the grub screen.
This is pretty much where I'm at right now. I strongly suspect the fault is with the ATI drivers, but have been completely unsuccessful in my attempts to fix it. I've googled just about everything I could think of, along with searching these forums. I've tried just about everything listed in the forums, but to no avail.I've tried the commands that are supposed to purge the ati drivers, but all I get are errors that say they can't remove the 'virtual drivers'.
Right now I'm booting off a live cd, so I know the computer still works fine, just not my actual installed OS. I'd really like to get the issue resolved without having to reinstall, as it took quite awhile just to get it usable in the first place, but this has already taken so much time, I may just resort to that if we can't solve it any other way. Got too much work to catch up on as it is.As a re-instated note, perhaps if you have any tips, but not particularly about fixing the OS, my laptop (I'm strongly guessing my graphics card) is heating up much more than normal, compared to that when XP was installed. Is this more than likely just a driver issue, as is the rest of it? Also, I did have Compiz installed, though I didn't choose for it to be installed, I believe it came pre-installed. I've heard it could cause some issues, though I have no idea as to the validity or relation to this particular issue.
Edit:
I just remembered while searching for a solution, I found a post somewhere that said something about the information not being sent to the monitor from the graphics card properly, thus no desktop. I'm guessing that'd still fall under the driver issues, but again, I'm unsure. I would think that wouldn't be entirely true anyway, since I can still see my mouse fine, just no desktop, only a black screen.
After succesfully installing Ubuntu 10.4 x32 and rebooting pc hangs on black screen with a flashing white dot in the top left corner of my screen, i've tried installing it twice with the same results.
my setup is: Asus p5q-e,
4 gig of corsair dual ram,
ati 4850 graphics,
onboard audio.
ahci mode
win 7 installed on intel ssd, and xp on a samsung 320 gb sata 2,
i had this configuration running fine for 2 months without boot loaders,
on pc start up i choose from which hdd to boot from.
i installed ubuntu on the samsung drive where it was recognised fine, wiped it all and installed automatically.
pls let me know if there is anything i missed, and advice if possible in what to do.
thanks
kannanni
When i log in as root, and try to click the lock screen button, lock screen doesnt work? Is it disabled by default?is there anyway to lock screen when logged in as root
View 6 Replies View RelatedThis has happened in natty more than once. Once the screen gets locked after long periods of no keyboard/mouse activity (all ok for short periods of time), I don't even get back the familiar unlock screen with password.I get a blank screen and then Io a ctrl-alt-f7Is this a known issue in natty? Or is this a gnome bug
View 2 Replies View RelatedI want to connect my OpenSuse 11.3 Distribution with the Internet via WLAN. But i can't open the KNetworkManager. It doesnt respond to my clicks. If I click on the KNetworkManager "Button" it doesen't react.
Result : I can't modify my WLAN-Connection.
When i use the shutdown-command in the terminal as root, it nearly works. It starts to shut down, and it looks like all programs and the kernels shuts down. I end up with a black screen, sometimes with the ubuntu-logo on, but it never powers off. I have to force it off by holding the power button. When i use the graphical interface to shut it down, it works perfectly. The poweroff-command works without problem too.
Here is the command i use:
Code:
defult theme however the close, maximize and minimize buttons are on the left of the screen instead of the right. Is there a way to move thoes back to the right side of the screen?
View 4 Replies View RelatedI install UBUNTU 1104 on HP Desktop PC, but now it doesnt start. Just appears a Black screen with this msg: Error Code = 1001.
I want reinstall but PC is not reading CD, But the CD drive is working.
I install UBUNTU 11 in other 6 PCs, and work fine.
PC inf.: HP Compaq dc5800 Small Form Factor
I never install Windows on this PC. The original OS was UBUNTU 9.04 and updates.
I have an Acer Aspire 5220 with and AMD processor and 1 GB of RAM. I had Windows vista and now have Dual Boot Vista / Kubuntu 9.10 clean install. Recently a blank white box appeared in the upper left corner of the screen. About 10-20 minutes after I log in it appears and disappears after 1-2 hours.
View 2 Replies View RelatedI shut down my laptop, which is running Ubuntu 9.10, without any problems. When I got home and tried to boot it, it finishes the POST and then I get a blank screen with a cursor for a few seconds. The word "GRUB" then appears in the upper left hand corner and that's it. The system is hung and I have to power off.
I've seen a lot of discussion that 9.10 uses grub2. Any ideas how I get out of this? Do I need to downgrade to legacy grub?