General :: Shutdown-command Doesnt Work Properly - End Up With A Black Screen
Jan 14, 2010
When i use the shutdown-command in the terminal as root, it nearly works. It starts to shut down, and it looks like all programs and the kernels shuts down. I end up with a black screen, sometimes with the ubuntu-logo on, but it never powers off. I have to force it off by holding the power button. When i use the graphical interface to shut it down, it works perfectly. The poweroff-command works without problem too.
I was messing around with the screen orientation and thought it would be funny to orient it sideways. Big mistake The screen went black.I can force a shutdown, login and I get the same black screen. I tried hooking up an external monitor and the monitor showed no input so I'm guessing my laptop doesn't have that capability with Fedora.This is my main computer.
I have recently installed 11.04 natty on Intel Core i3-2100 3.1 GHZ using its own graphic accelerator. When the screen is idle for a long time, more than 1 hour, I get a black screen with the mouse arrow but nothing else. the mouse moves the cursor and Ctl+Alt+F1 does work. How to fix this problem?
I have been trying to fix this for some time, on and off, and have been unable to, I have also ben unable to find a solution in the forums.I have installed openSUSE11.2 GNOME on a laptop, the install went fine, and it runs great, except for two problems:When I start up the splash screen doesn't show (this isn't really important, and I am happy to watch as everything is loaded)When I shutdown/reboot the computer freezes and I have to use the power button to switch off.This doesn't happen every time I shutdown, but most of the time.The freeze happens at different points of shutdown, so I don't know where to find what is causing the problem.As I mentioned point 1 is not really important, although I would like to know why this is happening, but problem 2 is very important.
I have an 80GB HDD where I installed Windows XP first and then Ubuntu. The thing is that whenever I shut down my computer and then turn it back on (wether it's right away or a few hours later, or the next day), I get the GRUB screen where you have to choose Ubuntu, but after that just a completely black screen. I then have to force a shutdown, then turn it back on, and it works. Whenever I restart it works too, this seems to happen only after a shutdown.
Specs: Dell Dimension 4600 P4 2.8 GHz procesor 2GB RAM ATI Radeon x1650 video card 80GB HDD
I'm use ubuntu 8.10 ( on a msi 645 notebook ) and i'm trying to shutdown from grub. I have add these entries to menu.lst after the ### END AUTOMAGIC KERNEL LIST
title Halt halt
I only get a black screen but the pc is still running someone said it only put grub to sleep or something. I also tried this commands sudo shutdown -h now or init 0, poweroff... but there all "unrecognized commands" in grub... Is there a possibilty to shutdown from grub.
I want to connect my OpenSuse 11.3 Distribution with the Internet via WLAN. But i can't open the KNetworkManager. It doesnt respond to my clicks. If I click on the KNetworkManager "Button" it doesen't react.
When i log in as root, and try to click the lock screen button, lock screen doesnt work? Is it disabled by default?is there anyway to lock screen when logged in as root
I have tried loading 11.4 from the DVD from Linux Magazine. Everything goes swimmingly until I get to using it when the screen shows black rectangles, is "twitchy" and nothing works properly. I currently run 11.3 which works fine.
my printer is not listed the type of drivers it mentions to download in plug and play.the drivers listed dont come close to the number(465cn).I have a brother mfc-465cnwhere do i find the drivers that will be compatible. generic diver listed didnt work or other numbers listed under the 'brother' or 'mfc' brandI went to the open printer website and my printer isnt listed there either. just brother and some other mfc's but nothing near what my printer is.
I turned on my Acer laptop and during bootup it seemed normal. After it passed the blue Acer logo, all I could see is a black screen and a black cursor outlined in white in the shape of an X. Thinking it would be a one time thing, I turned it off again.it still was a black screen.
I updated Debian system yesterday. I am getting black screen after I execute startx command. I am using system as server and manually boot into GUI mode whenever required.
For some reason Fox News Video, does not work in FC12, but CNN BBC video are all fine and plays. Flash is installed.e.g. URL... results in just a black screen with a fox logo and no video.
I just upgraded to 10.10 version (32 bit) and istalled gmameui along with mame. Although when i try to run gmameui preferences the program crashes, it recognizes the roms and am able to play so it doesnt really bother me. The problem is that joystick works but not properly despite jscal calibration .My joystick is recognized as js0. I reinstalled "joystick" package but the problem persists
today I have updated OpenSuse 11.2 to 11.3. When the system boots I can see BIOS output and selftest. After GRUB is passed the screen goes black, but boot process is continued to "init 3". SSH and all daemons work fine. I get a screen on the remote inside board, but no output on the attached LCD (Graphic: ATI ES1000 on board). I seams that output is redirected to "Remote Inside Board" only. how to switch output back to screen?
I just installed Maverick on my HP tx1000. Jockey offered me two drivers for my NVidia Go 6150. I tried the recommended one--and it seemed to be working. It had a green light next to it in Jockey, Compiz worked, etc. Then I rebooted.
Except it didn't reboot--the disk thrashed for a while, and then I was met with a black screen. I tried recovery mode and got a bash prompt...which crashed when I ran `startx'. Then I tried Failsafe X, which did work. After some experimentation, I realized it was the Nvidia driver at fault, so I tried the not-recommended one, which didn't work, and now I've disabled both of them. But isn't there a proper driver for me to use? IIRC, I was using a restricted one with Lucid, and it was working all right.
Fun fact: The day before I installed Maverick, Windows 7 randomly decided to not boot all the way. It would show the splash screen, and then hang with a black screen too. But it works in Safe Mode. And had been working fine for a while beforehand. There must be demons in my graphics card.
I'm having a pretty serious problem, whenever I try to boot into Ubuntu the screen goes black, I see a flash of purple or violet and then i get a prompt asking for my login credentials, afterwards I'm stuck with a terminal trying to start the gui... I don't know what I'm doing wrong, fresh install tried to reboot after getting the display driversinstalled idk if that could be a problem. I tried to commands in the terminal already:
startx sudo service gdm start return = start: Job is already running: gdm
I am using a server where i need to login twice. The first time i login as my boxname and pass. The 2nd login is 'root' so i can access the content of the box (i dont understand it but that hasnt stopped me from using it as normal).Now i like a GUI so i can browse files easier and drag and drop multiple files instead of using the command line. WinSCP doesnt work as it locks up. I suspect its because there is a prompt to log in again.
I'm trying to fix this problem: [URL] I have a problem with fglrx driver since Catalyst 9.9. After installation and reboot I get only black screen when X tries to start and keyboard doesn't work however when I press power button then the system shuts down properly after a while. I have noticed this for the first time on Hardy after installing Catalyst 9.9 and since then I have the same problem on Karmic and Catalyst 9.10/9.11 as well. I don't understand the bold text, What is this X he's talking about?
I running 1 pc touchsmart IQ816 (windows7, standalone) and a sunfire server (fedora 14, standalone).Because my touchsmart screen doesnt support dual screen input, i'm reaching my server true vnc. Is there a beter way (VMware?) to handle this problem?Im new in VMware: Can a esxi server from vmware help me out in this situation? Do some people have experience on this?
i am fairly new to Ubuntu. i was using it fine for a month, but today, when i booted my computer up, it came up with a black screen instead of the normal purple ubuntu screen. the black screen had white text on it, and asked for my username and password. from there, it was a terminal prompt. i have been google searching for a while, and have tried typing "startx", "sudo apt-get install ubuntu-desktop", "sudo gdm", and i have also tryed uninstalling xorg, and reinstalling, and none of these things wanted to do anything for me.
I've been a happy Arch Linux user for years now. Recently, on my eee 1000he (an Atom netbook with intel GMA graphics) I've been seeing strange things. After it has been on for some time (usually hours), the screen starts to jitter, just for a fraction of a second, every now and then. After this has happened some times, the screen goes black (one time it went red). The backlight is still on and I can still ssh to the machine which reacts normal appart from the black screen. I can only regain the screen when rebooting. What could this mean? Is it hardware or software? X logs don't shown anything weird, where should I look? I haven't found anyone with the same problem on the net.
looking for a command that shutdown/reboot my ubuntu just same as process that happened when I press shutdown buttonIn fact I need to close all programs that are running and then PC shutdown (that happened when I press shutdown button).
I am using inotify-tools in order to achive my task. inotify-tools has two commands inotifywait or inotifywatch. I am using inotifywait. I want to be able to extract unique paths that inotifywait will output and then take those unique file path run them through clamscan and quarantine the files if necessary. Here's what I have come up with so far.
I have a very weird issue here. At work I have a machine that runs ubuntu 10.04.1 and whenever I do a "shutdown -h now" the system shutsdown for a few seconds and the comes back up again.
The system itself is a HP DC7900 SFF machine. It was the network setup along with wild flying magic packages that caused this.
