OpenSUSE Wireless :: KNetworkmanager Doesnt Work - Doesnt Respond To My Clicks
Nov 23, 2010
I want to connect my OpenSuse 11.3 Distribution with the Internet via WLAN. But i can't open the KNetworkManager. It doesnt respond to my clicks. If I click on the KNetworkManager "Button" it doesen't react.
I used to be able to connect to the wireless but recently Ubuntu has gone waywards on me.How do I find out what wireless hardware I have? How do I get the right driver for it?Currently I can identify the wireless but cannot connect. Connecting with Ethernet works.
I had some Problems with analog Modems.We have now new Server Hardware witch don't work with Suse 10.2, now we Upgrade to 11.2, but the Devolo Modem doesnt work with the Drivers vor 10.2, No Problem, this Modems are sold out, i had to search for other Modems.Now I Test an Softmodem with Motorola Chipset, Bad Luck.Then i Think, Try a Hardware Modem From US-Robotics, Expensive but working on Linux: USR802981-OEM But don't working on Suse 11.2.If you had some Other Modem (internal Pci) witch works for DialIn Data Connections please sent me Type and Configs
I've installed yast2 on suse 10.3but when i start suse i there should normally be something in the right column but the column is empty. Does anyone know how to fix it
This is the first time I'm trying out chmsee on 11.4 (I've tried on previous version - never had any issues with it).The problem is chmsee fails to start. It gives error as shown below:
Code: ** (chmsee:11798): WARNING **: GECKO_UTILS >>> Couldn't find a compatible GRE! ** ERROR **: Initialize html render engine failed!
The situation:At my workplace there is a shared printer installed in WINDOWS. It's installed also in my windows system(WINDOWS 7 ULTIMATE version 7600). It's working very well. From windows I shared it to have the option for printing from openSuSE 11.3. In Samba I can see the other colleagues connected to the same workplace network. I shared also the printer with Samba.I can see it.
The problem :The printer doesn't work.I can't find a opensuSE11.3 driver for it (Samsung CLX 3170 FN).The question 1:Is it really need a properly driver for it if it installed in windows? The question 2:How can I make printing from openSuSE11.3 with the shared installed in windows server printer? Steps done:in MS Win system I shared ,I noted the WORKGROUP,the PC name and the IP for the printer. //ALso I know the domain and my IP.well done in resolv.conf,in fact I have internet connection from openSuSE 11.3,no problem,e-mail/evolution and kmail are working very well,configured both for the workplace). Now in openSuSE what should I do? I need some advices/right steps) about configuring this printer USING few ways(Samba,Printer config from YAST etc) because I am thinking somehow I did something wrong. When I make print test page the printer make the noise is preparing but nothing is happening. I believe that maybe the driver missing is the problem. BUT ONCE AGAIN,it's installed in my PC in Windows system,/I have dual boot system/GRUB MANAGER/openSuSE and Windows 7 Ultimate 7 7600. Can I work with the printer via internet/network //Samba/CUPS/etc,etc with localhost /IP,or other way if I DON'T have a driver for openSuSE
I am using 8.04 Sometimes, when I start some video or audio file, I cant hear the sound. Even if it is working some time back. Then it starts all of a sudden or mostly I need to do a restart.
i've come to replacement my 80 yr old fathers win98 machine with lucidFirefox 3.6.3 says 'connecting to .....' when accessing a webpage (eg his home igoogle page,bbc.co.uk ) and then times out .It all works with opera and links2 and pings are the usual times and its doing DNS . I've added 4.4.4.4 and 8.8.8.8 to /etc/resolv.conf for good measure FF its configured NOT to use a proxy ( Im fed up looking and checking !) and ive tried the 'detect settings automatically'this is a 'mission critical' step. Going to linux is a big enough change , so getting FF working will be a deal-breaker
Code: bahie@bahie-laptop:~$ sudo apt-get install screenlets python-rsvg [sudo] password for bahie: Reading package lists... Done Building dependency tree Reading state information... Done python-rsvg is already the newest version.
I am installing in Kubuntu (I cant stand ubuntu anymore) But when i try to use dd to install to a USB, I cant because Ubuntu got rid of the root and when i sudo it, It doesnt seem to work!
I have coriander-2.0.0-1.fc14.i686 installed and it does n t work anymore as it used to with my IIDC compliant ieee1394 camera.
I understood that raw1394 and video1394 modules are now deprecated. So firewire_ohci and firewire_core are loaded when I plug in the camera. There is no more /dev/raw1394 and /dev/video-0 streams, but now there are /dev/fw0 and /dev/fw1.
When I run Coriander, I receive: Erreur de segmentation (core dumped)
If I create the following link: ln -s /dev/fw1 /dev/raw1394
right now im using the nm-applet but i dont like it. it produces lags. i think the periodical ssid/broadcast check might be the cause :/it lags every minute or so...in games and skype it is very annoying! if there is a possibily to disable these scans in nm-applet it would be fine too.for the moment im "using" this wpa_supplicant config:
I have a computer that i wish to install ubuntu 10.04 on, it wont install tho, it tells me that it cant detect the cd rom (the drive it is booting from) and that i should insert a removable device with the drivers on it, except i dont have those and don't know where to get them. i cant boot from a usb but i have a usb with 10.04 on it just incase. i tryed this with both alternate install and desktop. i dont know what to do, i have invested 2 days to try and do this and i would really like to put this on my computer.
I have previously installed 8.04 on my computer with out such error and all of the hardware is the same (even the hard drive), and i lost the 8.04 disk. <(it was a live disk)
I am running xubuntu 11.04 (ISO from early this week). During install, I selected to NOT auto login but to present this gdm panel where I have to enter the password (or other users could log in).
Now I decided to enable auto-login (and to start the screensaver right afterwards) ... so I opened up the "login screen settings" (systems menu), unlocked that window and changed it to "login as xxx".
Then i rebooted and would have expected to be greeted with my screen saver on a logged-in session afterwards. But what happens is that there is a gdm panel sitting ... showing me
AUTOMATED login Other
Where the first item wont do anything.
So I have to select other and enter user name + password ?
my printer is not listed the type of drivers it mentions to download in plug and play.the drivers listed dont come close to the number(465cn).I have a brother mfc-465cnwhere do i find the drivers that will be compatible. generic diver listed didnt work or other numbers listed under the 'brother' or 'mfc' brandI went to the open printer website and my printer isnt listed there either. just brother and some other mfc's but nothing near what my printer is.
I found some code and tuts that tell me how to create a playlist, and I followed it to the letter but it doesnt work...I'm guessing it has somethin to do with my configuration settings with apache, otherwise here's the code:
I installed linux on my imac G5(i did not dual boot) and now i want to install os x again on my mac but when i try to boot the installation cd it doesnt work.
I have ubuntu (gnome) but I prefer to use Kile as tex editor. Since maverick, the side symbols tool box stopped working.I click, double-click ou press return but the symbol code (e.g. cup ) is not inserted in the text.Does any one have the same problem? How can I fix it?
For some reason Fox News Video, does not work in FC12, but CNN BBC video are all fine and plays. Flash is installed.e.g. URL... results in just a black screen with a fox logo and no video.