Ubuntu :: "reformat" External Hdd Without Loosing Data?
Jul 28, 2010
I have an external hdd I use at work to backup files and transport larger files. When I first formatted it I used FAT32, so these silly computers with fruit on the side of them could also use the drive. I've now come to the conclusion it is best to do away with those fruity computers, and stick with linux (and when needed, windoze).
As such I'd like to "convert" the external hdd from FAT32 to NTFS; that way I can support >4GB files while still retaining windoze comparability. Is it possible to do this without loosing the files currently on the drive, or do I have no option but to re-format?
View 5 Replies
ADVERTISEMENT
Jul 3, 2010
Just bought a 'my passport essential' wd external drive. Before putting anything on it I want to get rid of the partition that holds a windows exe for backing up and some security features. Not sure whether its a hidden partition but wondered whether the on-board disk utility could achieve the same as 'f' disc used to.
View 3 Replies
View Related
May 18, 2010
Hello everyone! I use UBUNTU 9.10 (karmik). But I am totally disappointed!!! Everything is too slow! I want to install UBUNTU ULTIMATE 2.0. Can I do that without loosing any data? (music, movies, etc) Do I have to store my data in another HDD?
View 2 Replies
View Related
Apr 9, 2010
I recently reformatted my external hard drive. Somewhere along the way I think my fstab got messed up because now my hard drive won't mount. Instead I get the following error:
Error mounting: mount exited with exit code 1: helper failed with:
mount: wrong fs type, bad option, bad superblock on /dev/sdb1, missing codepage or helper program, or other error
In some cases useful info is found in syslog - try dmesg | tail or so
If I mount it through Gparted, it mounts just fine.
My fstab currently looks like this:
View 3 Replies
View Related
Aug 30, 2010
Short version: How do I reformat an external hard-drive (read-only, NFTS) so that I can rw to it.
Long version: I had a self-built Ubuntu desktop that is now dead. I have pulled out the hard-drives and have bought one of the connector's to convert the SATA cable to USB so I can put the data on my Mac. Unfortunately, my Mac is not able to read the hard-drive for some reason... So, I've decided to boot my old Ubuntu laptop to pull the files from the SATA drive to an external drive then hopefully connect that external drive to transfer the files to the Mac. The external drive is currently formatted as NFTS and I'm unable to reformat it with gparted--I'm guessing that's because it's read-only mode...?
Ubuntu ext3 SATA -> connector -> Mac OS X
or
Ubuntu ext3 SATA -> connector -> Ubuntu ext3 laptop -> external NFTS HD -> Mac OS X
View 3 Replies
View Related
Feb 8, 2011
I was trying to reformat my Seagate external hard drive and I selected "free Space," in disk utility not realizing that the computer would no longer recognize the device. I'm trying to install Snow Leopard on it so now how do I format it now to the GUID format? I luckily backed up the entire contents of the hard drive (The essential files on it), but what do I do now that the computer doesen't recognize it!?
View 9 Replies
View Related
Aug 19, 2011
I tried to install ubuntu 11.04 on my external hard drive (WD My Passport, thats all i remember about the name) and all was well, until I tried to reformat it from ext4 to FAT, and no such luck, it isn't even being READ, not in fdisk -l, not by gparted, disk manager, or anything else. Windows is no help at all... I tried that out of desparation.
View 9 Replies
View Related
Dec 11, 2010
I rebuilt a server and am now trying to recover my large data arrays. The server was ubuntu 10.04lts before. I decided to rebuild it with CentOS simply because I am more familiar with it. I had 2 raid-5 arrays on the old server:4 x 1tb -> md0 5 x 2tb -> md1 The newly built server does not know about these arrays yet. How can I reassemble the arrays without loosing my data? I know the data can still be accessed because booting the server with a live-cd mounts and shows the arrays just fine. Should I boot with a live cd and copy the mdadm config file?
View 5 Replies
View Related
Jan 15, 2010
i have ubuntu 9.04 i want to know if i can do a partition base on what i have right now cause when i installed ubuntu i didnt do the partition to install windows so i want to do it now or in any case how can i reinstall ubuntu again without loosing my data store in my hard drive what is best to be perform in my pc i am very happy with ubuntu and wanna keep with it but sometimes a have some app in windows
View 9 Replies
View Related
Jun 22, 2010
I had i a dual boot win. 7 and ubuntu 9.10,recently i had some problem in my windows os so i restored the c drive to factory settings since both operating systems where in c drive so when i tried to boot grub was showing problem.the information displayed was loading grub, the file does not exist rescue grub> so what should i do to restore grub so that i can boot again into windows 7 and ubuntu without loosing my data.
View 1 Replies
View Related
Oct 11, 2010
I'm trying to install Ubuntu 10.10 in a desktop computer with three disks. SDA with NTFS in SDA1, where I have Windows XP, SDB where I had Ubuntu 10.04, and SDC where I have an NTFS partition. I want to install Ubuntu 10.10 in SDB without loosing the data in SDA and SDC. When I try to install it, when I choose specify manual partition, I only find this: Where is SDB abd SDC? What do I choose in Device for Boot Loader Installation?
View 2 Replies
View Related
Oct 23, 2009
I had a fedora 11 on a IDE HDD and a raid 5 with 4 SATA HDD with a rocketraid card 1640 After a crash of my HDD, i try too install a centos 5 on a new HDD and the problem is to install a raid 5 without loosing my datas who are on the raid.
View 1 Replies
View Related
Jun 3, 2009
I have a home directory which is mounted on the LVM partition,How can i reduce the size of LVM partiotion without loosing the data on home directory...whenever i use lvreduce command it show me a warning mesg that the whole data will be lost...reducing the size of LVM partition without loosing my home directory data.
View 1 Replies
View Related
May 24, 2010
Can not save data to external usb hard drive
formated and mounted on Ubuntu 9.10
visible on desktop /Dev/Sdb1
View 1 Replies
View Related
Jul 29, 2010
So I am working on a clients PC, and after I saved their data on an external hard drive I left it plugged in while I reinstalled Windows for them.....I HATE Windows. Stupid OS doesnt know any better than to just go deleting everything. Ubuntu would have known better than to delete multiple hard drives like that.
Anyway, please tell me I can salvage this data for my client? It was probably just reformatted. The data should still be there right?
View 4 Replies
View Related
Sep 21, 2010
I have a problem I don't know how to solve. Today I bought a netbook and while waiting for the new Ubuntu Unity release to come out, I thought of trying out Crunchbang instead of Windows that came with it. Browsing on my Ubuntu desktop machine, I found a guide for making Crunchbang live USB stick, and i followed the procedure. However, I made a very stupid mistake. The guide said I should enter the command:
sudo dd if=/path/to/iso/crunchbang-10-alpha-01-openbox-i686.iso of=/dev/sdX bs=4M;sync
where "of=...." part should be replaced with the name of the HDD. I forgot that I have an external HDD mounted and mistakenly copied the data to it.
After this, I cannot see the content of my external HDD anymore. Instead, i have this 620mb large Crunchbang-install device.
I know what I did was stupid, but is there a way to get the content of my HDD back? I have some valuable data on it.
View 4 Replies
View Related
Nov 18, 2010
I have a 1TB External HD that at the time of purchasing was used with my PS3 which only allowed FAT32 HDs. But now I am using it for other uses. I have came across the problem of the file size limit of 4gb that FAT32 has.The problem is I have about 200 GB filled of data on this HDD and wish to convert it to NTFS with no data being lossed. Is this possible and if so how?
Edit: BTW no Microsoft just Ubuntu
View 2 Replies
View Related
Feb 19, 2010
Using AWN 0.3.9 on Ubuntu 9.10. AWN calendar applet returns the message "Unable to return calendar data from external source" when started. It is configured to read Evolution which is functioning normally.
View 4 Replies
View Related
Mar 26, 2010
I'm getting a really low speed (2-3 mbps) while transferring data to my USB drive and external hard drive. I've heard this problem's there in Karmic but not in Jaunty but i have Jaunty and yet I'm facing this problem.
View 3 Replies
View Related
Apr 6, 2011
I was trying to fix some hardware on my laptop and i ended up mucking the whole thing up. The HDD seems to fine though. I have it in a external HDD enclosure and it's plugged into my mothers desktop through usb.I'm trying to print some files I have, but my home directory on the external HDD is encrypted.
View 3 Replies
View Related
Jun 23, 2010
I have Western Digital 1 TB external HDD. I had slackware 13 and it could copy data to it with speed around 30 MB/s (copy from machine to HDD) and it was cool. It's usb 2.0 as KInfoCenter says. But now in fedora 13, it's like 1 MB/s or even less (KInfoCenter still says usb 2.0). Any special mount option to set in fuseblk to speed it up? I mean something like blksize or like that?
Code:
/dev/sdc1 on /media/My Book type fuseblk (rw,nosuid,nodev,allow_other,blksize=4096)
View 4 Replies
View Related
Nov 19, 2010
When installing Mint 10, I re-did some partitions, but forgot to turn off my old 30Gb external HDD, and deleted it's partitions. Which is the best software to recover it? It was partitioned with Windows software I think. Or should I use XP and freeware? Or else it will cost me $70-$80.
View 1 Replies
View Related
Feb 12, 2010
I specified the wrong out file while using the dd command to write a .img to what I thought was my thumb drive. Browsing the hard drive shows the liveOS folder but no longer any of the previous folders.I used PhotoRec to see if I could recover the files and it was able to recover files. So the files are still there. Is there a way to get these files without having to wait for PhotoRec to work on the 500GB drive, since this will take a while.
View 1 Replies
View Related
Feb 25, 2011
I have 2 external drives that I'm using for movies and they're both formatted to fat32. The problem I'm experiencing now is that some of the high quality mkv files are not able to be moved to the drive because of fat32's limitations.
I'd like to convert to ext3 (or 4) and I wanted to check to see if I can do it without having to reformat and without loss of data.
View 4 Replies
View Related
Feb 28, 2011
I am running Ubuntu 10.04, and i recently purchased an tandberg LTO-4 SAS tape drive. I want to access it and backup data on it. Do I simply just connect plug it into the server,and I should be able to backup/transfer data to the tape drive? Or are there intermediate steps before I can do that. Here are some results from commands that I have typed:
Quote:
ls /dev/tape/
by-id
Quote:
ls -lt /dev/tape/by-id/
total 0
lrwxrwxrwx 1 root root 9 2011-02-25 14:54 scsi-3500110a00145553e -> ../../st0
lrwxrwxrwx 1 root root 10 2011-02-25 14:54 scsi-3500110a00145553e-nst -> ../../nst0
[code]....
View 4 Replies
View Related
Nov 30, 2010
I'm looking for a tool similar to synctoy in linux. For those who dont know what synctoy does is... its a simple syncing application that allows you to copy your data between multiple hard drives and keeps all copies in sync with the latest data. I'm specifically looking for KDE based tool if KDE based is not available then my second preference will be for gtk based app.
View 2 Replies
View Related
Jan 10, 2010
I have a 300 external usb drive which I have got when using windows and so is using a fat32 filesystem. I have since moved to linux only and am mounting the drive as vfat however I think I may as well convert it to ext4 if possible for (amongst others) performance and security reasons. The problem is I don't have a separate drive which would hold the 250gb of data temporarily whilst I changed the filesystem of the drive so I am hoping there is a way to format as ext4 whilst retaining the files?I know partition magic on windows allowed you to change between filesystems whilst keeping the data but does anything similar (and free! ) exist for linux?
View 14 Replies
View Related
Nov 20, 2010
This community is very helpful to me.i have one external usb harddisk but its not getting detected any where.i have some important data.i want to recover that data.so could any one telme how to recover data from dead usb external hard drive.any help appreciated please helpme.no hardware is detecting but one small green light is coming.
View 3 Replies
View Related
Mar 19, 2011
I'm using Ubuntu 10.04 and am trying to use it to recover data from a failed External HDD (NTFS).
The drive failed with an accompanying smell of electric burning and subsequently was not recognised by Windows. It would recognice the enclosure, but told me that the drive had to be reformatted.
I removed the drive from the external enclosure and hooked it up to my PC with a power cable and USB to SATA connector. I can mount the drive in Ubuntu (eventually) and I've learned enough about BASH to navigate through the files on the drive.
Those that I can access I am able to copy across to my internal drive (VERY slowly, but it does do it) but a lot of the directories show up with an Input/output Error when I run the ls -l command.
Is there any way for me to be able to access these files or to recover them? Should I be trying a different technique rather than just attempting to access and copy the files?
View 1 Replies
View Related
Aug 14, 2010
I have an Aspire One with Linux operating system.
I have an external hard drive that I want to save data to from my Aspire One however when I try I get a message that the external hard drive is full.
I know it isn't full and when I use the external hard drive on my other pc with Window 7 it is fine.
I am assuming my problem is something to do with the ACER Aspire One
View 7 Replies
View Related
