Ubuntu Installation :: 3 Disks Partitions And Windows XP - Install 10.10 In SDB Without Loosing The Data In SDA And SDC
Oct 11, 2010
I'm trying to install Ubuntu 10.10 in a desktop computer with three disks. SDA with NTFS in SDA1, where I have Windows XP, SDB where I had Ubuntu 10.04, and SDC where I have an NTFS partition. I want to install Ubuntu 10.10 in SDB without loosing the data in SDA and SDC. When I try to install it, when I choose specify manual partition, I only find this: Where is SDB abd SDC? What do I choose in Device for Boot Loader Installation?
View 2 Replies
ADVERTISEMENT
Jun 22, 2010
I had i a dual boot win. 7 and ubuntu 9.10,recently i had some problem in my windows os so i restored the c drive to factory settings since both operating systems where in c drive so when i tried to boot grub was showing problem.the information displayed was loading grub, the file does not exist rescue grub> so what should i do to restore grub so that i can boot again into windows 7 and ubuntu without loosing my data.
View 1 Replies
View Related
Oct 24, 2010
i specifically told ubuntu to install alongside my operation system (windows) and instead it installed over windows and deleted all the other partitions... i had 200gb of data that i completely lost is there anyway to recover this data?
View 4 Replies
View Related
May 18, 2010
Hello everyone! I use UBUNTU 9.10 (karmik). But I am totally disappointed!!! Everything is too slow! I want to install UBUNTU ULTIMATE 2.0. Can I do that without loosing any data? (music, movies, etc) Do I have to store my data in another HDD?
View 2 Replies
View Related
Oct 23, 2009
I had a fedora 11 on a IDE HDD and a raid 5 with 4 SATA HDD with a rocketraid card 1640 After a crash of my HDD, i try too install a centos 5 on a new HDD and the problem is to install a raid 5 without loosing my datas who are on the raid.
View 1 Replies
View Related
Jan 15, 2010
i have ubuntu 9.04 i want to know if i can do a partition base on what i have right now cause when i installed ubuntu i didnt do the partition to install windows so i want to do it now or in any case how can i reinstall ubuntu again without loosing my data store in my hard drive what is best to be perform in my pc i am very happy with ubuntu and wanna keep with it but sometimes a have some app in windows
View 9 Replies
View Related
Dec 8, 2010
I installed Fedora on a VMWare, hosting OS is Windows 7
How can I access Disks and NTFS Partitions on the Host OS "Windows 7"
From Fedora?
View 1 Replies
View Related
Apr 3, 2011
Brand new HP Compaq Presario CQ56, want to dual-boot 7 & Ubuntu. Too many partitions I think:
HD0 - 298.09 GB
System
199 MB NTFS
C:
279.36 GB NTFS
RECOVERY D:
18.43 GB NTFS
HP TOOLS
103 MB FAT32
Want to add Ubuntu + Swap in the 90 or so GB range, fairly new to partitioning. Trying to create recovery disks using system tools is over 16 Gb, for that kind of expense I may as well just order recovery disks OEM if (When) Windows falls apart.
View 1 Replies
View Related
Jul 11, 2010
I'm trying to install Fedora 13 on my HP dv6 laptop and when I try to use the Use Free Space installation type, I receive a Partitioning Error: Could not allocate requested partitions - not enough free space on disks. Before I started the install, I used the Disk Management utility in Windows 7 to shrink the volume of the C: drive down to 242 GB and leaving 210 GB Unallocated. Here is what the screen looks like when I select Create Custom Layout (also receive the not enough free space error):
Device (sda) Size Type
sda1 199 ntfs
sda2 248,018 ntfs
Free 215,175
sda3 13,443 ntfs
sda4 103 vfat
View 5 Replies
View Related
Feb 9, 2011
I am installing Ubuntu on the same hard drive as Windows 7. The partitions of Windows 7 have already occupied the left part of the hard drive. From left to right, the Windows partitions are one partition for Windows booting, one for Windows OS and software installation, and one for data which is planned to mount on Ubuntu. I was wondering how to arrange the order of partitions of root, home and swap, i.e. which is on the left just besides one Windows partition, which is in the middle and which is on the far right?
View 1 Replies
View Related
Apr 8, 2010
I have Dell Laptop 1545 which already installed windows 7 home premium which is also having two partitions one is reserved by the oem and another is for recovery partition and another 200gb i am using for windows 7 now i have left only 80gb hard disk. So I started to install the Fedora 12 in my laptop every thing is going fine but
at the time of creating the partitions iam unable to allocate the partitions the left 80gb i tried to select and tried for custom partition but to my surprise it is giving the following message "Could not allocate requested partitions: not enough free space on disks"
View 3 Replies
View Related
Oct 17, 2010
While installation of openSUSE on machine already having winXP and Ubuntu, I chose "Edit partition setup", I also chose GRUB: change locaiton to "MBR" enabled installation summary was something like this, shrinking sda1 to 13.02 and sda5 to 12.3 Gb, swap partition to sda3 (old linux), root partition to sda6(old linux), then began installation, and after sometime, while shrinking done with sda5, when started with sda1, it showed the following error- Failure occured during following action: Shrinking partition /dev/sda1 to 13.03 GB (progress bar might not move) System error code was: -3027. Now, currenly, i am not able to have my winXp back, during booting it shows: error: no such partition grub rescue>_
View 7 Replies
View Related
Dec 11, 2010
I rebuilt a server and am now trying to recover my large data arrays. The server was ubuntu 10.04lts before. I decided to rebuild it with CentOS simply because I am more familiar with it. I had 2 raid-5 arrays on the old server:4 x 1tb -> md0 5 x 2tb -> md1 The newly built server does not know about these arrays yet. How can I reassemble the arrays without loosing my data? I know the data can still be accessed because booting the server with a live-cd mounts and shows the arrays just fine. Should I boot with a live cd and copy the mdadm config file?
View 5 Replies
View Related
Jul 28, 2010
I would like to combine my Linux partition (/sda3) and /sad1 to give me more disc space. I would also like to combine the two unallocated partitions to install a Windows 7 dual-boot with Ubuntu. How would I do that without totally raping my current Ubuntu install?
View 1 Replies
View Related
Jun 3, 2009
I have a home directory which is mounted on the LVM partition,How can i reduce the size of LVM partiotion without loosing the data on home directory...whenever i use lvreduce command it show me a warning mesg that the whole data will be lost...reducing the size of LVM partition without loosing my home directory data.
View 1 Replies
View Related
Mar 28, 2010
I've installed Arch Linux onto my Western Digital SATA drive.I love it, best ever, however, I need the fglrx proprietry driver for better 3-d performace, and decided to create a new partition. I decided to install Linux Mint.Sadly, in all my noobishness, I forgot about the 4 primary partition limit (oops!) and as I have /, /home, swap, and /boot partitions (all primary) already installed, I have run into a bit of a problem.I resized my /home partition (almost 500GB) to about 225, and was then told I have over 200GB unusable space. Is it possible for me to change at least 1 of my primary partitions to logical partitions AND keep all the data intact (AND edit the arch configuration so that it'll still work) so I can install a second linux? I sincerely doubt it
View 10 Replies
View Related
Oct 24, 2009
Created abt 16.4 gb free space using Disk Management in vista. I read the sticky on installing from the live cd and did accordingly. Whatever Partition i create first (boot or /), it gets done. However, when tryin to create the 2nd partition, i get "Could not allocate requested partitions:Not enough free space on disks." Cant proceed any further.
View 5 Replies
View Related
Nov 16, 2010
In my hard disk I have win xp, opensuse 11.1 and ubuntu 10.4. I'd like to replace 11.1 version of opensuse with the last one 11.3 without losing data and setting in other partitions. this is my hd:
[Code]....
I think (but I'm not totally sure) I installed opensuse in dev/sda6 and dev/sda7...what is the right thing to do?? should I have to delete /dev/sda5 /dev/sda6 and /dev/sda7 partitions and then install opensuse 11.3 in the new free space??
View 9 Replies
View Related
Jan 15, 2011
I would like to install ubuntu on windows xp which has 6 partitioned hard disks. When I try to install ubuntu on hard disk F, it says i need to select a root. However, I could not succeed in selecting a `root`. I also tried wubi, but it was terminated with an abrupt error just before it was finished. Furthermore, what does boot directory mean?
View 5 Replies
View Related
Mar 5, 2011
I have an ASUS A8N-SLI board with an nForce4 raid 1 setup hosting a Windows 7 array over two 500GB disks. I have a third SATA drive with opensuse 11.3 installed and working perfectly. By changing the boot order in the BIOS, I can alternate which system boots at startup. What I want to do is set up a dual boot configuration... I don't care how, but I want a screen that asks me which OS to use, preferably defaulting to Windows so my wife can stil check her email without calling me at work.
I thought the easiest setup would be to set the LINUX drive as the primary device and then add then chainload the Windows disks, and set them first in the boot queue. That way, without any intervention, the system would pause for 8 seconds and see if I wanted to boot LINUX, then boot Windows if I didn't do anything.
The problem is, I can't figure out how to add Windows to the GRUB menu and recognize it. All of the documentation I can find seems to assume that your Windows and LINUX partitions are on the same disk, which mine are not.
View 9 Replies
View Related
May 1, 2011
I have 10.10 installed within my Windows Xp.All was fine.Then,I upgraded to 11.04.Boot screen etc is fine .Log in is automatic in Classic.Unity & Compiz not supported.Now,again everything is fine except that my xp partitions are not recognised and hence I can not mount them and access them.
View 5 Replies
View Related
Jul 1, 2011
I've a clean installation of Ubuntu 11.04 (AMD64) and i'm having problems with automount ntfs partitions/disks.
[Code]....
View 1 Replies
View Related
Feb 18, 2010
I'm using Ubuntu 9.10 and previously had a separate partition with another distro on it. I decided to delete the other distro's home and swap partitions and install XP in place of it. I've been following these instructions: [URL] and [URL] I have gotten to the point where I am booting to the XP CD and want to install it, but I get the message, "Setup did not find any hard disks installed on your computer" when I should be getting to the screen that asks me to select a partition to install XP on. This is what my HDD looks like in GParted:
I want to install XP in the unallocated partition, but I have a feeling I screwed up somewhere along the way and probably don't fully understand the whole thing. Even if I try to format the unallocated partition to NTFS I can't make it a primary partition (I assume because it's within sda2). The very last thing I want to do is delete my Ubuntu partition and start from scratch, but if that's my last option let me know.
View 4 Replies
View Related
Jul 28, 2010
I have an external hdd I use at work to backup files and transport larger files. When I first formatted it I used FAT32, so these silly computers with fruit on the side of them could also use the drive. I've now come to the conclusion it is best to do away with those fruity computers, and stick with linux (and when needed, windoze).
As such I'd like to "convert" the external hdd from FAT32 to NTFS; that way I can support >4GB files while still retaining windoze comparability. Is it possible to do this without loosing the files currently on the drive, or do I have no option but to re-format?
View 5 Replies
View Related
Jun 6, 2011
turn off the feature that causes the inactivate windows to loose their opacity. I use two monitors and have a number of applications running on each monitor. All the windows on the monitors have important information that I use. However, all the windows that are not active loose opacity and it's very hard to read their content unless I constantly click on the windows. One of my next upgrades for this year includes adding a Video card that has support for more than two monitors so that I have easily have even more windows in view. With the opacity lost it's going to be very hard t work in the environment.
I'm running Ubuntu 11.04 with the default Unity desktop. By the way, I'm sure if I boot into Ubuntu Classic or Unity 2D the problem would go away. However, I'm trying to use the default Unity desktop, as much of my reading appears to indicate some of the alternate boot options might be eventually be removed as an option. Also, I would like to experience the Unity as suggested by the developers. So hopefully this is a feature of the Unity 3D that has a user adjustment control.
View 1 Replies
View Related
Aug 17, 2010
I use slackware 13.1 and I want to create a RAID level 5 with 3 disks. Should I use entire device or a partition? What the advantages and disadvantages of each case? If a use the entire device, should I create any partition on it or leave all space as free?
View 4 Replies
View Related
Dec 22, 2010
I have got 2 disks available and would like to create 3 main partitions: one for file system (maverick), one for home folder and one for linux swap.
I read many howtos and now I feel more confused!
I would like to obtain the more efficient solution in order of speed (performance): as far as I can understand (not so far) .. it seems that the best choice is:
Quote:
disk 1: [beginning] ubuntu | home | others [end]
disk 2: [beginning] swap | others [end]
My situation now is, according to guides I read before:
Quote:
disk 1: [beginning] ubuntu | others [end]
disk 2: [beginning] home | others | swap [end]
now .. before moving all my staff ..
I thought to have understood that ubuntu use swap only for hibernation / suspend activities, and therefore it's recommendable to put the system at the beginning of one disk, and the home folder at the beginning of a second disk in order to have quickly two disk reading / writing on the right position without moving too much and spend time.
But now I'm confused because it seems that ubuntu DOES use swap for normal activity (and so it's better to put it) at the beginning of a second disk.
I always saw my swap next to zero during my activities .. is ubuntu using swap like windows with pagefile.sys?
View 1 Replies
View Related
Mar 31, 2010
I have/had a PC with several hard drives, and a mix of ubuntu and windows on multi boot.The old boot drive died screaming, and I need to start again. (But my data is safe! yay!)
Is there anything special about which drive can be the main drive to start booting from? Or to put it another way, can I install to any of the other 3 and expect it to work, or do I need to switch them around so a different drive is on the connections for the recently dead one?
View 2 Replies
View Related
Mar 1, 2011
Last week I installed Ubuntu 10.10 on my system in dual booting. I had installed succesfully both but unable to see data files from windows OS. Though I have excercised the options in various resources available on internet/blogs. System takes about 03 hrs during installation process. I am also unable to configure Thunderbird.
System hardware info is as -
System ManufacturerVIA Technologies, Inc.
System ModelKM266APro-835
System TypeX86-based PC
[code]....
View 8 Replies
View Related
Feb 7, 2010
I'm browsing on my phone which is not letting me scroll to the end of this text box so I will say thank you in advance for any replies now.After my computer was switched off abruptly after a power outage I have many errors upon booting. My hard drive setup consists of a RAID0 array of two 500GB sata disks. The partition table (from my head!) goes like this:50GB NTFS Windows XP /c/50GB ext4 Ubuntu 9.10 /4GB swapThe rest is a large NTFS partition all the way up to the end of the array at 987GB. Mounted at /media/share/I am thinking I will have to start again (I won't lose much, I have recent backups), but what is the best way of restoring the system as much as I can? Currently my computer has been booted into Ubuntu for over an hour, and after pressing ctrl+alt+shift+F2 I can see that it is finding errors still, now at sector 6008. Should I let this run its course or REISUB it and boot onto a live CD. I think the main problem is with an NTFS partition
View 1 Replies
View Related
