Ubuntu Installation :: Reinstall Again Without Loosing Data Store In Hard Drive?
Jan 15, 2010
i have ubuntu 9.04 i want to know if i can do a partition base on what i have right now cause when i installed ubuntu i didnt do the partition to install windows so i want to do it now or in any case how can i reinstall ubuntu again without loosing my data store in my hard drive what is best to be perform in my pc i am very happy with ubuntu and wanna keep with it but sometimes a have some app in windows
View 9 Replies
ADVERTISEMENT
Dec 8, 2009
I have two students whose windows laptops are riddled with malware and not working properly. They want me to help them install Linux (which we use in school), but they are concerned about their iTunes.
Having avoided iPods as "defective by design", I know nothing about iTunes whatsoever. However I remember reading about DRM locking and such problems that have me concerned that I won't be able to do it.
Where does iTunes store its stuff?
Can I copy its data store to an external drive, and then into a linux home?
Then will it work on wine, or can another manager (rhythmbox etc) access the itunes data?
Alternatively, if I partition the drive and install linux, can rythmbox/wine/something access itunes data on the win partition?
Supposing they are buying music through iTunes, what will happen to that account?
Finally, one of them has an iphone. Does that work with linux?
Ironic that an apple application is blocking migration away from windows.
View 9 Replies
View Related
Aug 29, 2010
I would like to completely erase my hard drive and install Ubuntu 10.04 on again fresh. I think some files have become corrupted from a power cut that I had last night whilst the laptop was plugged in (and turned on).
I'm not bothered about completely wiping the hard drive since there are no important files on it (at most there are just a lot of packages I downloaded from the repro...) I don't have any Windows installations either - it's just a simple; wipe the hard drive and reinstall all over again case
View 2 Replies
View Related
May 18, 2010
Hello everyone! I use UBUNTU 9.10 (karmik). But I am totally disappointed!!! Everything is too slow! I want to install UBUNTU ULTIMATE 2.0. Can I do that without loosing any data? (music, movies, etc) Do I have to store my data in another HDD?
View 2 Replies
View Related
Apr 21, 2010
I am trying to setup my ubuntu machine to automatically log some data I am trying to collect and write the data to a flash drive. I have everything setup so that when the machine boots up it starts that logging process. The problem I am having is that sometimes (not always) ubuntu creates a directory with the same path that I expect my flash drive to mount to i.e., /media/data/ then my flash drive instead mounts to /media/data_/. I need to know the path of the flash drive so I can store my data on it.
View 2 Replies
View Related
Aug 30, 2010
i have a 200gb hard drive and im upgrading to a 1tb hard drive and i want all my stuff like settings and files on my new hard drive whats the best and easiest way to transfer all my stuff from the old hard drive to the new one
View 9 Replies
View Related
May 26, 2011
I've read the official documentation regarding hard drives and partitions. My pc has two hard drives. a 160gb primary hard drive with windows 7 a 1.5 tb secondary hard drive with about 80gb of free space I would like to know whether I can install ubuntu on the secondary hard drive, without touching any of the data present on that drive. From my limited understanding of storage, files are written all over hard drives during copy, move etc... Is the ubuntu partition manager smart enough not to overwrite any files during installation? Will I get a warning if there is a risk of any data loss on the secondary hard drive? I cannot backup any of the data on the secondary hard drive due to all my external drives currently being full.
View 9 Replies
View Related
Jun 22, 2010
I had i a dual boot win. 7 and ubuntu 9.10,recently i had some problem in my windows os so i restored the c drive to factory settings since both operating systems where in c drive so when i tried to boot grub was showing problem.the information displayed was loading grub, the file does not exist rescue grub> so what should i do to restore grub so that i can boot again into windows 7 and ubuntu without loosing my data.
View 1 Replies
View Related
Oct 11, 2010
I'm trying to install Ubuntu 10.10 in a desktop computer with three disks. SDA with NTFS in SDA1, where I have Windows XP, SDB where I had Ubuntu 10.04, and SDC where I have an NTFS partition. I want to install Ubuntu 10.10 in SDB without loosing the data in SDA and SDC. When I try to install it, when I choose specify manual partition, I only find this: Where is SDB abd SDC? What do I choose in Device for Boot Loader Installation?
View 2 Replies
View Related
Oct 8, 2010
I'd like the final layout to have a Windows partition (will start out as XP and will become Win7 when I can afford yet another copy), a partition for Ubuntu, and a shared Data partition that I can use for all my files between both OSs. I think this should be fairly straight forward with Linux on a Primary partition with / and swap. Only thing is, from what I've read (and yes I know this is a bit old school) it might be a good idea to put in a /Home partition so that I can reinstall new upgrades and maintain settings. But I don't want to max out my 4 primary partitions so I can use a 4th partition as a kind of sandbox for OS testing without using VirtualBox all the time.
This leaves me in need of some advice, I've never used Fdisk and I was planning on just using the Ubuntu installer to do all of this, but I don't know if I can create /Home as a logical partition in the main Ubuntu partition and still have the benefit of being able to reformat /root without losing /Home. I might have just confused myself, because no matter how many guides and How Tos I read I still don't really get extended partitions, I understand logical vs. primary but extended is...confusing. I need the Ubuntu partition to be bootable, so it needs to be a primary partition...I think. Unless I can have: /boot, /, swap, and /Home...
Also, if Ubuntu can read NTFS, and Win7 can read Ext3, what should a do with /Data? Or should I just go with FAT32 and be done with it. (It's a big HDD btw, 640 GB, so /Data will be fairly large)
View 6 Replies
View Related
Jan 25, 2011
I've got 4 identical 1 TB drives and would like to use them in a software RAID configuration on my home server. I'm running Debian Linux using 'mdadm' utility to manage the software RAID. I don't know how much I've read is fact or dated or even false so I decided I would ask here to get help from people who know more about this than I do. This is essentially just a file server machine to store all my data so being that I've got four identical SATA hard drives, I was thinking about doing RAID level 5. I guess I'll start here and ask if that is the recommended level of RAID. I think RAID level 5 will be fine for my general server usage. My second issue is partitioning the four individual drives to get maximum performance / space from them. Basically just asking here how would you or you recommend I partition the drives? I was thinking about doing three seperate partitions per drive:
/dev/sda1 = 4 GB (swap)/dev/sda2 = 1 GB (/boot)/dev/sda3 = 995 GB (/)Now from that partition schema above, obviously all the types will be 'fd' for RAID and the partition for /boot is going to be bootable. My confusion is that I read Grub doesn't support booting from RAID 5 since Grub can't handle disk assembly. If /dev/sdx2 (sda2, sdb2, sdc2, sdd2) are partitioned for /boot (bootable), how would you guys configure this RAID to match up equally? I don't think I do a RAID level 1 on 4 identical partitions, right?
View 1 Replies
View Related
Apr 23, 2010
I have version 10.4 running on my computer, but when I boot I get a kernel panic. I then restart hit ESC and load a previous working copy. How do I reinstall over my 10.4 without loosing my programs etc? my problems started after a normal morning update.
View 9 Replies
View Related
Aug 15, 2010
So in essence, my drive has become a cluster of random partitions, multiple Ubuntu installs, and random windows systems. It's gotten so bad that on my entire 250gb system my main Ubuntu install only gets 40gb of memory. Could anybody give me a step by step guide to do the following:
1. Completely wipe and departition my disc.
2. Install Ubuntu from a backup .tar file
3. Install a 40gb windows 7 partition
View 2 Replies
View Related
May 24, 2011
every-time i try to install, i get this
Error executing command
>>command=C:Windowssysnativecdedit.exe /create/d Ubuntu/application bootsector
>>retval=1
>>stderr=The boot configuration data store could not be opened
The system cannot find the file specified
>>stdout=
View 1 Replies
View Related
Jul 4, 2010
I have recently gotten hold of a device that helps me plug my old ATA/IDE hard drive to my computer and view my old files that I wish to recover. I am using Ubuntu and the harddrive that I wish to retrieve the data from also has an Ubuntu install on it. The files I wish to recover are old .doc files, which I want to keep to remember my old writings.
The problem I have encountered arises when I wish to open some of the files. The icon for some of the files, which happen to be my best writings, has an X on the top right, indicating that I cannot view the contents. When I click on the files, the following error message pops up: "Access to /media/c885571b-a6e5-4a2d-937a-78af7050910/george/Courses/hist388/Passion.doc was denied."
Now, I am guessing that I need to be able to log in as superuser or something to be able to access these files, so I logged in my terminal as super user by following the instructions outlined on this page: [url]
I still did not have the sufficient access required to be able to open the files that I would like to retrieve.
View 2 Replies
View Related
Sep 27, 2010
I have the strangest issue where my HDD reports full, but I can only account for about a tenth of the data.
Specs:
Ubuntu 10.4
laptop Toshiba Tecra A11
HDD 250GB
4Gb RAM
/home 20.3GB
/usr 2.4GB
/var 742MB
/lib 132.9MB
/opt 71.3 MB
/boot 15.4MB
/etc 14.2MB
sbin 7.4MB
bin 6.4MB
The rest are below a MB. This system is not a dual boot so 241Gb is ext4 and 8.9Gb is Extended and 8.9GB is Swap. This system has been loaded for about a month, when I initially loaded it there was 230GB free.
View 9 Replies
View Related
Jul 28, 2011
So, I recently acquired a second hard drive (1.5 TB) and I wish to partition Ubuntu 11.04 with Windows 7. I've set everything up properly and using the Disk Utility in my System Settings I've created a 1 TB partition which I want to use for Linux. I think it has the proper partition type but how do I exactly go about transferring all my files from the hard drive I'm using now to the partition I would like to have?
View 2 Replies
View Related
Apr 25, 2010
I am trying to transfer files from a SATA hard drive with Windows Vista (Home Premium) installed on it. Some files I can easily copy over, others just say Access Denied.
I'm sure permissions is part of the issue, unofrtunately Windows is unable to boot at all (surpise surprise) so I can't adjust anything from within in. I know with XP drives I can easily copy and paste onto my Ubuntu machine. I'm using a SATA to USB converter that let's me plug it in and my desktop reads it like an external hard drive.
I've gone into the properties and under permissions it shows my account as having access to Create and delete files under folder access amd "---" under File access. My group and others show None and --- for Folder and File access. I can post a link to a screenshot tomorrow. I've tried to also select Read and Write for File access but it goes back to the dashes before I can apply it.
I am running 64 bit Ubuntu 9.10 and do not have the sharing aspect installed. Any questions please feel free to ask me.
View 6 Replies
View Related
May 22, 2010
I'm running 10.04 LTS (64 bit) During a recent attempt at dual booting Windows 7, the Windows installer made a boot partition on the wrong drive, formatting the drive, and therefore destroying all my data.
The original partition was NTFS, and the new (unwanted partition) is NTFS.
Is there something in Linux I can do to recover the data that was there, or am I going to have to install Windows on yet another drive and use some Windows tools?
The data on this drive is extraordinarily important, containing ten years of digital photos, my source codes, and musical compositions (protools sessions etc).
View 7 Replies
View Related
May 24, 2010
Can not save data to external usb hard drive
formated and mounted on Ubuntu 9.10
visible on desktop /Dev/Sdb1
View 1 Replies
View Related
May 28, 2010
I should have seen this coming when I lost the ability to boot windows, or mount that drive from ubuntu. But now I think my hard drive has failed. Is there any way to retrieve the data from the hard drive, or my settings and the like for ubuntu? I'm at a loss for what to do as i'm booting from a CD right now =X.
View 4 Replies
View Related
Aug 11, 2010
I just want one last attempt at seeing if there's a solution. My Dell Studio 15 laptop HDD that runs Vista failed, I booted Ubuntu from a CD knowing that I should be able to recover my data.
However, Ubuntu can't find my HDD, it's not listed and "fdisk -l" doesn't result in anything. The BIOS seems to know that the HDD is there though.
View 4 Replies
View Related
Mar 24, 2011
I have a friend that has a computer running UBUNTU he has not used in a while and has forgotten the user name and password for it. Is there away to retrieve the data from this hard drive?
View 2 Replies
View Related
Apr 5, 2011
I'm trying to make a simple task as complicated as possible, so bear with me.
I'm going to force a friend onto Ubuntu soon, and the biggest requirement is photo management.
He wants his extensive photo library backed up, and backed up some more, and then when all feels safe, backed up even again.
Currently, all his photos reside on a 4 disk striped RAID array, based on his cousin's recommendation. The intent was a RAID 1+0, but they failed, and that needs to be fixed immediately.
So, instead of going with more mirrored hard drives in a RAID, which I know Ubuntu will do just fine, I'd like to simplify and just do manual backups of each hard drive.
So, I'm looking for a program that could possibly be set up to automatically back up a hard drive onto another hard drive on a weekly basis or something like that. Ultimately, doing a manual copy/paste of the data in the drive could work, but would be time consuming.
I'm scared of RAIDs lately because of a recent fiasco with a BIOSTAR motherboard and how it set the RAID mirror on a set of hard drives for a Windows load that rendered the harddrives basically useless for anything but a RAID mirror, with that motherboard and a Windows load, and I almost lost a lot of data because of it.
I'm also not sure how well Windows would recognize a RAID partition created in ext3, if he ever wanted to go back to Windows.
View 5 Replies
View Related
Jun 20, 2011
My servers (10.10) motherboard has failed so to access my data I've taken the hard drive out and tried to connect to it via my ubuntu desktop (10.10). I've tried it in a hard drive caddy and installed in my pc, but could only see a 255Mb Filesystem with a few folders and files on it. how to mount the portion of the disk that I can't see? Ie. the part with all of the data on it.
View 7 Replies
View Related
Jan 30, 2010
I need to store a copy of my c drive someplace in case installing corrupts my hard disk, I was wondering if it is safe to store a entire c drive on another computer in a folder, and if I do, can I format a corrupt hard drive then copy the contents of the stored c drive folder back into it and the computer will work again.
View 2 Replies
View Related
Oct 3, 2009
Im using rhl 5 on my new hard drive,i want to transfer data from my older hardrive (which has windows xp installed,one partition has fat32 and another has ntfs filesystem) to the new hardrive...
View 3 Replies
View Related
Jul 19, 2010
I have a Seagate 1TB external USB 2.0 hard disk which contains 740 GB of data. Everytime I connect, it shows the memory occupied and the remaining memory(190GB)..but when i try to access the folders inside they read empty... nothing is seen in the folders.. I am unable to read any data from it or write to it... Same is the case with Windows When I run self-test in Linux ubuntu I get
Reallocated sector count
threshold: 36
Normalized: 61
Worst: 61
value: 6488
Current pending sector count:
Normalized:1
threshold: 0
worst: 1
value:2036
View 1 Replies
View Related
Oct 4, 2010
My friend just got a gaming laptop that he won't let anyone else use (his last one got infected when his girlfriend surfed on it for just one hour -- he refuses to use antivirus since he claims he knows how to keep clean, but he doesn't trust others).
Because I used Linux a bit once, I said to him what if I could promise not to make any changes to your hard drive, and I told him that I was pretty sure I could boot to a live cd and then only write files to a usb key. He's actually willing to let me try (I showed him some linux sites I was looking at, and he believes me that we can do this).
1) Is there anything I either MUST do or else must NOT do to make sure I make no changes to his laptop's hard drive? And so that any changes are only going to go on the usb drive I hook up?
2) Since he's got an i7 processor, I assume I should get a version of ubuntu that supports 64 bits, right?
View 6 Replies
View Related
Dec 11, 2010
I rebuilt a server and am now trying to recover my large data arrays. The server was ubuntu 10.04lts before. I decided to rebuild it with CentOS simply because I am more familiar with it. I had 2 raid-5 arrays on the old server:4 x 1tb -> md0 5 x 2tb -> md1 The newly built server does not know about these arrays yet. How can I reassemble the arrays without loosing my data? I know the data can still be accessed because booting the server with a live-cd mounts and shows the arrays just fine. Should I boot with a live cd and copy the mdadm config file?
View 5 Replies
View Related
