I have an Aspire One with Linux operating system.
I have an external hard drive that I want to save data to from my Aspire One however when I try I get a message that the external hard drive is full.
I know it isn't full and when I use the external hard drive on my other pc with Window 7 it is fine.
I am assuming my problem is something to do with the ACER Aspire One
I connected an external 22" monitor to my new linux netbook and now I am trying to improve the display clarity. By shifting the "clock" monitor bar to 100 ,the letters were less faded but edges of my screen were lost (by zooming in). Can I fix that through Linux?
View 3 Replies View Relatedhow to set up a boot partition on the first hard drive separate from two RAID 5 configurations on a Supermicro server with 1-750GB hard drive for the boot partition, and 15-1TB hard drives for data. The 15 hard drives are split into two RAID 5 configurations (7 -TB drives and 8 1-TB drives). I will be installing CentOS 5.2, and the 15 Terabytes of data will store data, and the 750GB hard drive(on port 0) will only have the 100MB boot file. I am using 3ware BIOS Manager to configure the first array of 7 hard drives, and the second array of 8 hard drives (1 drive with boot information will not be included in the array).
to recap, picture this: I want to load CentOS on this server. /dev/sda1 (on the bottom left drive) needs to house the boot partition set for 100MB. The remaining 7 drives (the left half, not counting the boot drive) need to be set up as a RAID 5 array. The eight drives on the right (right half) also need to be setup as a RAID 5 array. After I configure this in BIOS, I run the CentOS setup disk in graphical mode. I get to the portion after the Language and keyboard setup where it says "Installation requires partitioning of your hard drive. By default, a partitoning layout is chosen which is reasonable for most users. You can either choose to use this or create your own. Select the drive(s) to use for this installation". The drives listed are:
"sda 5721980 MB AMCC 9650-SE-8LP DISK"
"sdb 1020 MB AMCC 9650-SE-8LP DISK"
"sdc 714218 MB AMCC 9650-SE-8LP DISK"
"sdd" 6675643 MB AMCC 9650-SE-8LP DISK"
When I choose "Remove Linux partitions on the selected drives and create default layout." or any other option, I get different errors. I notice when configuring via text mode I get better options to install. I can't install the boot drive separate from the two RAID configurations?
I have a server with RHEL 5. I have bought a HDD and put it into a USB box. Then I plug it to my server by USB cable. I want to mount it but the fdisk -l command don't show external usb device.
View 7 Replies View RelatedI have an Acer Aspire One with Linux operating system.Using Easy Peasy.No optical drive of course, but have bought an external one.The AA One recognises it and I want it primarily to install a program which is on CD. Familiar with Windows but a novice with Linux.
View 2 Replies View RelatedI'm looking for a tool similar to synctoy in linux. For those who dont know what synctoy does is... its a simple syncing application that allows you to copy your data between multiple hard drives and keeps all copies in sync with the latest data. I'm specifically looking for KDE based tool if KDE based is not available then my second preference will be for gtk based app.
View 2 Replies View RelatedI'm using Ubuntu 10.04 and am trying to use it to recover data from a failed External HDD (NTFS).
The drive failed with an accompanying smell of electric burning and subsequently was not recognised by Windows. It would recognice the enclosure, but told me that the drive had to be reformatted.
I removed the drive from the external enclosure and hooked it up to my PC with a power cable and USB to SATA connector. I can mount the drive in Ubuntu (eventually) and I've learned enough about BASH to navigate through the files on the drive.
Those that I can access I am able to copy across to my internal drive (VERY slowly, but it does do it) but a lot of the directories show up with an Input/output Error when I run the ls -l command.
Is there any way for me to be able to access these files or to recover them? Should I be trying a different technique rather than just attempting to access and copy the files?
et me know what will be the required settings under /etc/fstab for adding external usb floppy device?
View 3 Replies View Relatedi want to secure the USB port by any external device connection. so i need the code of detection of an external device when plugged in the USB port.
View 1 Replies View RelatedI wish to read the Manufacturer data and other details such as Device ID, Serial number on a USB drive.
1. Could anyone help me out with information on the memory structure of a USB drive? (which location is the mnfr data stored?)
2. Are there are any commands in Linux that will help in reading/accessing this data?
I've got an external hard drive with one large data partition on it. I also have four computers to connect it to (individually, not at the same time). Three machines are running Slackware and one is running Ubuntu 9.10. I need to be able to just plug the drive into whichever machine, mount it (preferably to the same location each time) and not have to worry about user permissions and such. Do I just chmod 777 all the files and folders or is there a better method for different 'users' to access the same partition? And how about mounting to the same location each time?
Now the second part of my question I'm pretty sure I'm not able to do but just in case..... is there any way to encrypt the information safely and make it compatible with a Windows XP machine?
i have the following challenge: i have a Bluetooth GPS device that i have connected to my linux notebook. but now i also want to use the same device (or better, GPS data stream) for my Navigation device (HP Ipaq with TomTom). make an serial port bluetooth service (sending) that my Navigation device can connect to. copy the incoming bluetooth serial port data stream to the outgoing bluetooth serial port.
i have already installed GPSD so i have the TCP port where the GPS data is available for everything on my notebook. but now i also want it to send it out through bluetooth.
1. is there someone out there who already did this?
2. how to make an bluetooth serial port service on Fedora 12?
3. how to copy a data stream from 1 device to the next device?
I have an Acer Aspire One 1551 netbook. After I installed Ubuntu 10.10 Netbook Remix (my first Ubuntu, though), I discovered that wi-fi device isn't being recognized - ifconfig says that I only have ethernet device present.Somehow rfkill list indicates, that acer-wireless is always blocked. How to unblock it? rfkill unblock 0 doesn't resolve the issue - device is still blocked.somehow 'Fn+WiFi' combination on keyboard activates/deactivates Bluetooth instead of WiFi. Can I alter the behavior of the combination to turn on/off wireless networking? I googled for a while but fruitlessly. Is it a known problem? Is there a workaround for it already? Is there any additional information (clues) I can provide to speedup the process a bit?
This is what lspci returned:
Code:
00:00.0 Host bridge: Advanced Micro Devices [AMD] RS780 Host Bridge Alternate
00:01.0 PCI bridge: Acer Incorporated [ALI] Device 9602
00:04.0 PCI bridge: Advanced Micro Devices [AMD] RS780 PCI to PCI bridge (PCIE port 0)
[code]....
I initially thought the problem had to do with the Lucid Lynx upgrade, a lot of people have been reporting similar issues with drive mapping and things along those line. My issue is that an external drive, formatted in FAT32 appears to be corrupted, and overtime begins to read or mounts as 'read-only.'
What I've read, and deduced, is that this is ultimately and issue with the drive. I've backed it up, reformatted, and been able to write to the drive successfully, but I've been moving a lot of files (backing up) and the system has been reporting input/output errors in transferring some files (through the GUI).
The only thing I can think of, is that the device itself is corrupted or damaged, and that I need to be thinking of other back-up options for the future. Any suggestions on disk-doctoring? I'm hoping to do a clean-install of the OS once I back up my files manually.
I just tried to install ubuntu 10.04 to the hard drive of my netbook as i prefer it greatly over the standard linpus one. The operating system booted fine from a bootable usb drive and so i thought if i install it it should run.
so...i got to work installing the system...it completed and asked me to restart, which i did. From there the boot up screen comes on for the pc.....the one where it says press f2 for setup and f12 for boot priority....then goes to a black screen. on this black screen i have a message which says...
"error: no such device: 992fddd7-54c1-45e0-b990-7220c6fa9005 grub rescue>"
I have a Linux application(ProMAX 5000) running in a virtual Machine on my windows OS. I am using an external Hard drive of 250G in ext2 file system as my device for large data read, write & execute file system. I have already mounted the device from /etc/fstab. But i want my application to access this device as a Primary data storage device OR Secondary storage device. What command will i invoke to partition this 250G drive as my primary or secondary storage device.
View 1 Replies View RelatedThe external hard drive which contains all my photos and where I backed-up all my important documents is no longer recognized. It is a three month old 500GB Iomage Prestige Desktop Hard Drive.When I plug it in, it is recognised as a USB device, because it shows up when I type lsusb, but dmesg gives this error message.
[19712.013250] usb 2-2: new high speed USB device using ehci_hcd and address 21
[19712.145347] usb 2-2: configuration #1 chosen from 1 choice
[19712.147214] scsi25 : SCSI emulation for USB Mass Storage devices
[code]....
I popped the disk out of the casing put it on a SATA connect internally and then tried the file recovery programs testdisk/photorec and SpinRite, but both failed because they couldn't recognize the external hard disk.
I'm interested in storing my SSH keys and gpg keys on a smartcard for added security. However, I'm a bit uncertain on a few points, which are as follows:
How many keys can I get on a card? I assume both SSH and GPG can store keys on the card. Is there a limit to key size? I see a lot of cards saying they support 2048-bit keys, what about larger sizes? Hardware: can anyone recommend a card/reader combination that works well? I've done a fair amount of research and it seems PC/SC readers can be a bit iffy - is this your experience? Have I missed anything I should be asking? Are there any other hurdles?
I'm aware fsf europe give away cards with membership - I'm not sure I want to join, but... are these cards any good?
i'm using awk inside bash. i've got an array in awk called arrayinawk. everytime i call another awk command in bash i have to keep creating arrayinawk to work with it. is there anyway i can store arrayinawk in bash and just call the stored value next time i use awk?
View 14 Replies View RelatedI have two students whose windows laptops are riddled with malware and not working properly. They want me to help them install Linux (which we use in school), but they are concerned about their iTunes.
Having avoided iPods as "defective by design", I know nothing about iTunes whatsoever. However I remember reading about DRM locking and such problems that have me concerned that I won't be able to do it.
Where does iTunes store its stuff?
Can I copy its data store to an external drive, and then into a linux home?
Then will it work on wine, or can another manager (rhythmbox etc) access the itunes data?
Alternatively, if I partition the drive and install linux, can rythmbox/wine/something access itunes data on the win partition?
Supposing they are buying music through iTunes, what will happen to that account?
Finally, one of them has an iphone. Does that work with linux?
Ironic that an apple application is blocking migration away from windows.
I want to use PROMPT_COMMAND variable to build a history of all the commands i execute. So Basically i want to append the last executed command to my own command log file. How can i find the last executed command ?
I want to add PROMPT_COMMAND="echo $last_executed_command >> my_command_log" But I am not sure how to find the last executed command
Installed configured the squid2mysql, now i can get the control panel but the report is not storing in the database
other wise if you are having any other squid monitoring tool
On command line I have no problem storing a variable e.g
Code:
:~/bin$ process=`ps -ef | awk ' $8 == "idesk" { print $2 }'`
:~/bin$ echo $process
26736
:~/bin$
When I try to incorporate this into a shell script I get a blank.
Code:
:~/bin$ cat process_idesk
#!/bin/bash
process=`ps -ef | awk ' $8 == "idesk" { print $2 }'`
[code]....
The process_idesk script has been chmoded to be executable by the user. I'm sure there must be a silly omission on my behalf.
Currently we use an iSCSI SAN as storage for several VMware ESXi servers. I am investigating the use of an NFS target on a Linux server for additional virtual machines. I am also open to the idea of using an alternative operating system (like OpenSolaris) if it will provide significant advantages.What Linux-based filesystem favours very large contiguous files (like VMware's disk images)? Alternatively, how have people found ZFS on OpenSolaris for this kind of workload?
View 1 Replies View RelatedI'm writing a bash script where I read a text file (containing a column of numbers) and store each line in an array. There seem to be some problems with the whole thing however, but only for some files and not others. Here's what I do:
Code:
#!/bin/bash
file=time_notOk.txt ### The file with a column of numbers
i=0 ### Array counter
### Read the file
[Code]....
I have a spare harddrive that I want to store my videos on. They are in mp4 format. I'm using cfdisk to create a new clean partition on the drive. What filesystem type should i make it (linux,HPFS/NTFS,FAT16...)
View 2 Replies View RelatedI want to know how can I use sender an receiver of the email in name of file for storing mail in procmailrc. I made one but it does not work.
Quote:
SUBJECT=`formail -xSubject:` # regular field
FROM=`formail -rt -xTo:` # special case
:0 b
* ^FROM.*
| sed -e '/^To: +?[0-9]*$/,/report/!d' > ${FROM}${SUBJECT}--`mktemp 20`date +%y-%m-%d-%S--`XXXXXX`
it works when I use :
Quote:
| sed -e '/^To: +?[0-9]*$/,/report/!d' > `mktemp 20`date +%y-%m-%d-%S--`XXXXXX`
I have to read a couple of numbers from a random.txt file. In this .txt file there are random numbers. They are separated by a space. Example if you opened test.txt:
test.txt :1 6 1 3 6 8 10 2 4
I would like to read those numbers using CAT and store them into an array:
numlen=${#num[*]} - (must be like this because it is a part of a larger program)
I had tried to install Ubuntu 10.10 on an external harddrive, the Laptop was running Vista. It all worked fine, but now, when the external hd isn't connected, I ge the message: error: no such device : ... grub rescue> the I put the ls command grub rescue> ls (hd0)(hdo,msdos3)(hd0,msdos)(hdmsdos1) Now I just want to get Vista working again, without having to connect the hd.
View 9 Replies View RelatedExternal USB TV device to work on 10.04 I have an External USB TV tuner[URL] Device,That is Compatible with Windows.Is there any way to make it work with UBUNTU 10.04.
View 7 Replies View Related
