I am using a Canon MP560 and every time I try to print something I have to go back into the printer settings and change the settings from "From Driver" to grayscale and it is really annoying. How to I set it so it stays like that?
View 1 Replies10.10 x64. This did not occur before I dist-upgraded from 10.04.I use a USB headset that has always "just worked," as long as I have it selected under both Input and Output in Sound Preferences.Now, periodically I'll hear a pop in my headset, the music/sound will mute for a second, and then come back louder. What's happening is that in Sound Preferences, the default selections are being reset. The sound comes back louder because of my volume settings. Additionally, on boot I run a script to set a few keybindings I use for Ventrilo. When all of this happens, I have to run this script again to get the bindings back.
To fix it, I have to go into sound preferences, select my headset in both Input and Output, fiddle with the volume so it returns to normal, and then rerun my binding script.My first guess was that the headset's connection is "farting", like it'd do a disconnect/reconnect, and Ubuntu deals with it by selecting visible hardware. But I can't for the life of me reproduce it. It just happens randomly.I guess it's possible that the script's issue is related to ventrilo/wine, and not a direct result of this sound issue. I'm mentioning it in case it isn't.I reproduced it by pulling the USB cable out and putting it back in. So there's either a short or Ubuntu is resetting the USB port periodically. Does it drop ports like that?
As said in the subject, desktop decoration settings keeps resetting after rebooting. For me it is quite boring and annoying. Why it happens? Ubuntu should keeps my preferences (as in previous versions - my Ubu 10.10, Unity)
View 4 Replies View RelatedI was curious about the XF86Home shortcut for home folder, so I switched to Alt+Home. That's great, but just curious, how do you reset it to the default settings?There should be a configuration file somewhere, but anybody knows where exactly?
View 2 Replies View RelatedWhen I sudo apt-get install['ed] kolourpaint, I had to download all the stuff necessary for a KDE environment, I think. When I restarted the machine, everything went from black to light grey. Even NetworkManager went from the three or four curves to the pair of blue monitor computers. How do I restore the desktop environment settings?Since things changed after a command-line instruction, feel free to post the appropriate command-line instruction.
View 2 Replies View RelatedUbuntu Lucid, Asus T101MT tablet netbook.
Background Info: Normally the microphone doesn't work with some applications such as Empathy or the new Google Talk plugin for Linux. The workaround I'm using (and I don't know why this works) is to unlock the left and right channels in Pavucontrol and set one channel to zero, and to boost volume I set the other to max.
Issue: The Google Talk plugin is resetting the channels to be locked together. This is pretty frustrating because now they have free calling and I have no cell reception in my dorm room.
I've just installed Debian 8 XFCE and I can't get the sound working properly after a reboot. I mean I can but it keeps resetting to default audio output (analog-stereo) after reboot.
I set it to Digital Stereo in Pavucontrol settings, reboot and here comes analog-stereo again.
I've tried setting digital stereo as default using pactl in the terminal but same problem. When I change settings then relog in my session, sound is working, but when I reboot it reverts back to default output. Strange.
Here's my sound card info :
lspci | grep -i audio
00:1b.0 Audio device: Intel Corporation 7 Series/C210 Series Chipset Family High Definition Audio Controller (rev 04)
01:00.1 Audio device: NVIDIA Corporation GF114 HDMI Audio Controller (rev a1)
When I reboot, and check "synclient -l" all the options except the last two ("VertTwoFingerScroll","HorizTwo FingerScroll") are configured the way I made it. These keep getting reset to zero and I tried adding this snippet to the end of files in /usr/share/X11/xorg.conf.d but to no avail.If I do "synclient VertTwoFinger Scroll=1" then it my two finger scroll works, but I want it to be permanant. Anyone have a clue why it keeps going back to 0?
View 3 Replies View RelatedCurrently my partner is printing on my Epson Stylus Photo R265 from her XP system. I am attempting to convert her over to Lucid but every attempt so far to replicate the printer settings fails miserably.I had a look at Picasa which on first view appeared to give me exactly what I wanted being an A4 print without any border. However when I attempted to produce the final result it failed miserably, quality was wishy washy and displayed print lines across the paper.I raised the matter on the Picasa forum only to be informed that the method used by them is to forward the print to the printer. The responder assumed that it was via Cups and suggested that I look to the print settings in Ubuntu.
When I access the printer via the System settings all it gives me is connectivity details. Where should I be looking to access the settings where I can set the printing details. I am aiming to have the best photo quality on premium glossy paper and printing without borders.Is this possible to achieve ?? I have been round the houses with F-Spot, Photoprint, Shotwell etc etc. Please dont mention Gimp as it is well over my head. Surely there must be some way of setting print quality within Ubuntu. I feel that I am so near to my aim and would like to achieve it as even she who must be obeyed is getting cheesed off with windows.
how can I make KDE applications to use duplex printing as default? In CUPS, I changed the default settings to "long edge binding". It works in non-KDE Applications like Openoffice, but in e.g. Okular I always have to set it every time I print. I'm using Suse 11.3 with KDE4.
View 2 Replies View Relatedwhat I need to do to the firewall in order to make a shared printer available to other machines on my network?
I have the printer set up and have tested it with the firewall switched off, but as soon as I restart the firewall, the printer is inaccessible.
I thought that all traffic on the internal network was allowed, but it seems that I need to create an explicit rule in order to get the shared printer working. Unfortunately, I haven't been able to figure out how to do that yet.
When I try to change some settings of my printer using HPLIP it tells me to add myself to the lp an sys group. Is that safe ? What are those groups used for ?
View 9 Replies View RelatedI have two 11.3 systems, one with my printers set up. Is there a basic method to export or transfer my printers' settings and drivers to the other system? Running Gnome on both.
View 1 Replies View RelatedUsing openSUSE 11.2 & 11.3, where should I look for the default printer settings?
I have a Brother HL-1440 laser which for some reason prints right down to the bottom of the page cutting off the top part of the last line on that page. The default settings for the top and bottom margins are 0.50 inches. During installation using Yast2, the test page printed with correct borders.
When I change the bottom margin in options (from Ctrl-P), the page prints with the bottom margin set to 0.50 inch. The problem is I have to reset that margin every time I print a new document.
Where can I change that default setting? I've searched in /etc, /var, and /home but can't find it.
I have recently installed Fedora 13 on my netbook. I wish to use my HP Officejet via the HPLIP utility. The problem with this is that when I have the firewall turned on, the printer is not recognised at all during setup. When the firewall is switched off, the printer is recognised. The printer in question is an HP Officejet 8500a which is connected via Ethernet cable to a wireless router. I would like to know if there are any network ports (that's used by HPLIP) that I could 'turn on' in the firewall that could let my computer recognise the printer.
[Code]....
I'm trying to figure out how to change the default settings for my printer under Firefox. I'm mainly interested in changing the default print resolution and the pages-per-side layout setting I can change the settings for all KDE applications through [URL], but I can't seem to be able to find the respective dialog for Firefox / GTK applications.
Firefox itself doesn't seem to have a dialog for the printer default settings; I've looked into about:config but all the value names are rather confusing.
My system environment:
openSUSE 11.3
KDE 4.4.4
Printer: Brother MFC-7420
I have access to a "virtual" Windows server terminal, which I can access through my Ubuntu Linux via tsclient or rdesktop. Additionally, there are printer shares on this network, which can be accessed from any Windows PC on the network (including the "virtual" terminals); lets say the address is [URL]. Now, I open \printshares.company.com in the "virtual" terminal in rdesktop (avoiding tsclient since it has a Bug #94743 in tsclient (Ubuntu): Terminal Server Client isn't able to copy to/from clipboard) - and I can see all printers fine.. However, when I'm on my Linux machine directly on the work network, I try and do something like:
$ ping printshares.company.com
PING printshares.company.com (192.168.0.200) 56(84) bytes of data.
^C64 bytes from 192.168.0.200: icmp_req=1 ttl=124 time=10.4 ms
[code].....
Is it possible to retrieve the - let's call them "connection settings" - from the Windows terminal session, so I could replicate them under Linux when running smbclient? the IT department running these Windows servers is quite irritated by people using Linux; and will offer no support to those kinds of "customers". Furthermore, if obtaining those settings requires some installation on the client session, since I don't have permissions to install anything on the Windows terminal session.
I've bought a HP Photosmart printer, HP Photosmart wireless e-All-in-One printer - B110a and i've got a problem installing it properly. I'm using Debian 6.0 Squeeze. When i connect the printer, Debian doesn't recognize my printer as the Photosmart B109 printer for unknown reason. When i go to the site of HP and search for a driver, it directs me to this site:I've downloaded that latest hplip file as a .run file and installed it. My printer is recognized proparly, but when i try to print a colored image, it comes out black/white. Something is not crrect. Does anyone recognize this problem with this type HP printer?
View 7 Replies View RelatedI just upgrade to Fedora 11.
I have problem in installing the printer, no matter add printer in local network or Windows Printer via Samba.
The summary is as follow:
I have download a printer driver and had installed but got error when I tried to printer a test page.
So I was fiddling around with things earlier today, trying to figure out how to use ssh to remotely view a desktop, and I accidentally set the DISPLAY property to something else using Code: export DISPLAY=something I can't remember.But I don't know how to set it back, nor what it should be set back to.
View 1 Replies View RelatedA simple and small problem but annoying all the same...I don't like having the downloads/pictures etc bookmarks in the places menu so I remove them but every time I restart my machine they come back.
View 7 Replies View RelatedI have a piranha magnum mp3 player which is connected with usb cable. When i connect the player it's resetting. dmesg output;
Code:
[11326.752063] usb 2-3: new full speed USB device using ohci_hcd and address 2
[11326.964442] usb 2-3: configuration #1 chosen from 1 choice
[11327.742086] Initializing USB Mass Storage driver...
[11327.742319] scsi2 : SCSI emulation for USB Mass Storage devices
[Code]...
I have Lucid. I played with compiz and emerald. I put everything back. But my theme is no longer as it was before I started. Similar, but the icon set and windows are a little different. Under 'appearance' the theme, which I'm told is called 'light' isn't visible. And I don't know the original icon set. How can I restore my desktop to look as it did on installation.
View 1 Replies View RelatedI added two lines on the Xcorg.conf file to try and add forward/back buttons on my mouse but after I restarted Ubuntu will not boot past the splash screen. Can I reset Xcorg.conf in recovery mode to undo things?
View 1 Replies View RelatedI'm trying to reset the password that Evolution prompts you for when working with certs.Specifically, the "Enter the password for 'NSS User Private Key and Certificate Services'" password. I followed the instructions here, but they seem to be out of date. The files cert8.db, key3.db, and secmod.db are not in my ~/.evolution, nor was I able to find any files with those names in any folder referencing evolution in my home folder.
View 1 Replies View Relatedi recently installed ubuntu 10.10 64-bit on my laptop and installed all the drivers and updates i saw. When i first started it up my top panel was a solid gray and had a classic look, i saw online that i had to do Alt-F2, type gconf-editor then go to apps,panel,global click locked down, then i log out, log back in and it is fixed with my system theme. after i restart my computer it has the same classic look, and i have to go back to gconf, log out, relog, log out, relog and it finally works. why is it doing this?
View 2 Replies View RelatedAfter installing Windows 7 I didn't know how to restore GRUB and I installed a new Ubuntu 10.4, so that now the former installation is in 6th position on the booting screen.I tried to edit the "menu.lst" but, now in Grub 1.9 I can't find the "menu.lst"
View 2 Replies View RelatedI tried to adjust my system clock to daylight savings time, but now everytime I restart the computer it's reset. For example, I set the clock to 11:40 AM, Mon. 15 Feb. Upon restart, it's now 12:05 AM, Tue. 16 Feb. I've readjusted the clock several times, and it resets at every reboot.
View 3 Replies View RelatedI have a problem with my client PC. PC has a static ip 10.162.41.159 (supplied by editing and saving eth0 file, not by command line) in LAN. netmask is 10.162.41.128 and gateway is 10.162.41.129. My problem is after rebooting, ip is resetting into 10.162.41.130. It happens after rebooting even network cable is removed!!!if i restart network service ip will reassigned into 10.162.41.159. i dont know why this happens.
View 4 Replies View RelatedMy problem is I need a broad method to reset the rpm database on my [almost] up-to-date RHEL 5 WS system.
I do not fiddle around with installing new things on this system or perform strange configurations.
A little over a week ago, I started encountering packages in conflict. I entered a RHEL help desk ticket that has been open for over a week. The person assigned the ticket is trying to clear one error at a time.
Once I remove the package in conflict, I get pending transactions; follow the instructions to clear those; and then get more conflicts. I'd like to reset everything without re-installing.