Ubuntu Multimedia :: Sound Settings Resetting
Dec 10, 2010
10.10 x64. This did not occur before I dist-upgraded from 10.04.I use a USB headset that has always "just worked," as long as I have it selected under both Input and Output in Sound Preferences.Now, periodically I'll hear a pop in my headset, the music/sound will mute for a second, and then come back louder. What's happening is that in Sound Preferences, the default selections are being reset. The sound comes back louder because of my volume settings. Additionally, on boot I run a script to set a few keybindings I use for Ventrilo. When all of this happens, I have to run this script again to get the bindings back.
To fix it, I have to go into sound preferences, select my headset in both Input and Output, fiddle with the volume so it returns to normal, and then rerun my binding script.My first guess was that the headset's connection is "farting", like it'd do a disconnect/reconnect, and Ubuntu deals with it by selecting visible hardware. But I can't for the life of me reproduce it. It just happens randomly.I guess it's possible that the script's issue is related to ventrilo/wine, and not a direct result of this sound issue. I'm mentioning it in case it isn't.I reproduced it by pulling the USB cable out and putting it back in. So there's either a short or Ubuntu is resetting the USB port periodically. Does it drop ports like that?
View 1 Replies
ADVERTISEMENT
Aug 26, 2010
Ubuntu Lucid, Asus T101MT tablet netbook.
Background Info: Normally the microphone doesn't work with some applications such as Empathy or the new Google Talk plugin for Linux. The workaround I'm using (and I don't know why this works) is to unlock the left and right channels in Pavucontrol and set one channel to zero, and to boost volume I set the other to max.
Issue: The Google Talk plugin is resetting the channels to be locked together. This is pretty frustrating because now they have free calling and I have no cell reception in my dorm room.
View 2 Replies
View Related
Sep 1, 2011
I am using a Canon MP560 and every time I try to print something I have to go back into the printer settings and change the settings from "From Driver" to grayscale and it is really annoying. How to I set it so it stays like that?
View 1 Replies
View Related
Jun 10, 2010
I have no sound, is it possible to restore the default sound drivers/settings in 10.04?It was work well before except for one issue, I couldn't get mic in for Rosetta Stone using wine. I have followed so many howto's to try and get Rosetta Stone working and then my sound working again.I think this is my main problem I upgraded alsa to "alsa-driver-1.0.23". I could easily be wrong about that assumption though.I have a Dell XPS M1210Ubuntu 10.04 64bitI think this is my sound card, "lspci -v | less"00:1b.0 Audio device: Intel Corporation N10/ICH 7 Family High Definition Audio Controller (rev 01)Subsystem: Dell Device 01d7Flags: bus master, fast devsel, latency 0, IRQ 11 Memory at efffc000 (64-bit, non-prefetchable) [size=16K]Capabilities: <access denied> Kernel modules: snd-hda-intelBut I don't think it is being recognized,
$ aplay -l
aplay: device_list:223: no soundcards found...
$ arecord -l
[code]....
View 1 Replies
View Related
Mar 27, 2011
As said in the subject, desktop decoration settings keeps resetting after rebooting. For me it is quite boring and annoying. Why it happens? Ubuntu should keeps my preferences (as in previous versions - my Ubu 10.10, Unity)
View 4 Replies
View Related
Apr 24, 2010
I was curious about the XF86Home shortcut for home folder, so I switched to Alt+Home. That's great, but just curious, how do you reset it to the default settings?There should be a configuration file somewhere, but anybody knows where exactly?
View 2 Replies
View Related
Jan 10, 2011
When I sudo apt-get install['ed] kolourpaint, I had to download all the stuff necessary for a KDE environment, I think. When I restarted the machine, everything went from black to light grey. Even NetworkManager went from the three or four curves to the pair of blue monitor computers. How do I restore the desktop environment settings?Since things changed after a command-line instruction, feel free to post the appropriate command-line instruction.
View 2 Replies
View Related
Nov 19, 2015
I've just installed Debian 8 XFCE and I can't get the sound working properly after a reboot. I mean I can but it keeps resetting to default audio output (analog-stereo) after reboot.
I set it to Digital Stereo in Pavucontrol settings, reboot and here comes analog-stereo again.
I've tried setting digital stereo as default using pactl in the terminal but same problem. When I change settings then relog in my session, sound is working, but when I reboot it reverts back to default output. Strange.
Here's my sound card info :
lspci | grep -i audio
00:1b.0 Audio device: Intel Corporation 7 Series/C210 Series Chipset Family High Definition Audio Controller (rev 04)
01:00.1 Audio device: NVIDIA Corporation GF114 HDMI Audio Controller (rev a1)
View 1 Replies
View Related
Jun 17, 2010
When I reboot, and check "synclient -l" all the options except the last two ("VertTwoFingerScroll","HorizTwo FingerScroll") are configured the way I made it. These keep getting reset to zero and I tried adding this snippet to the end of files in /usr/share/X11/xorg.conf.d but to no avail.If I do "synclient VertTwoFinger Scroll=1" then it my two finger scroll works, but I want it to be permanant. Anyone have a clue why it keeps going back to 0?
View 3 Replies
View Related
May 7, 2011
I am running a dedicated audio PC (Ubuntu 10.04 on Intel Atom 525) with a Juli@ sound card. I had everything set up and working great up until I accidentally pulled the sound card out of its slot while the computer was running. After that, the computer no longer recognized the Juli@ card.
I managed to fix the basic problem by following the Comprehensive Sound Problem Solution Guide- deleting and reinstalling ALSA is what did the trick. The only problem remaining is that the computer no longer remembers the output settings in the Sound Preferences dialog. The setting stays for as long as the computer is on, but as soon as I turn it off and reboot it, the sound output setting reverts back to the internal audio. I tried 'sudo alsactl store 1', but this does not work. Does anyone know how to fix this?
View 2 Replies
View Related
Jan 4, 2010
My system (Ubuntu 9.10 Gnome Desktop) keeps 'forgetting' my sound settings. every day I have to go into sound preferences and select a different hardware device setting and then change it back to the right one in order for it to work. For instance my sound goes out of my onboard intel based sound via optical to my amp and so the hardware setting for this is IEC598 output + analog stereo input But everytime I boot their is no sound (and hence no light coming through the optical cable) so then I'll change it to Analog surround and the light comes out so then I can change it back to the 1st setting and it works again. Hope that makes sense, I have had this problem and also my video settings have been 'forgotten' and samba also won't work ever since about 4 days ago when the system updated, everything was working fine before that (i have run update manager since and everything is up to date)
View 2 Replies
View Related
Oct 25, 2010
Since I installed the system-wide equalizer I've been having some problems with my sound system. The problem is it has changed some system settings (visible in gconf) and after I uninstall it, I can't change any sound settings, except the volume in a given application, but the system-wide volume doesn't work, even the tray icon shows three dashes next to the little speaker and the sound settings won't start. I'd like to revert the settings to the original after removing the equalizer, as at this moment I can't change any settings even with the equalizer enabled. Is there any way to reset the sound settings
(I suppose it must be in gconf, but I don't know what the values should be. Currently the musicaudiosink settings are: audioresample ! audioamplify amplification=0 ! pulsesinkv)
Those are the settings that definitely changed after installing the equalizer, but they obviously won't change back after uninstalling it.
View 3 Replies
View Related
Jul 21, 2009
Every time I reboot I have to reset the audio card and run alsaconf. These settings are never saved. How can I get Suse to save these settings?
View 9 Replies
View Related
Jun 7, 2010
I've just moved from Ubuntu 9.04 and installed 10.04. I have 5.1 sound set up and selected the Analogue Surround 5.1 in the hardware selection. I'm using on board sound so i have the correct device selected. I have sound but my problem comes when trying to adjust the balance and sub etc. I can move the subwoofer on its own and set the fade on its own but if i try to change the balance the fade moves with it (not always in the same way, sometimes it fades to the rear, some times to the front). Also, when i move the master volume the subwoofer level follows it.Is there a fix for this problem?
Also how can i acquire the sound drivers and settings panel that where in 9.04 if not? will they still be comparable with 10.04?
View 1 Replies
View Related
Nov 30, 2010
I have a Debian Sid x86_64 installation on my laptop. I used to use skype a lot when I was on ArchLinux in chrooted 32bit environment. Nowdays, I tried running skype straight on the 64bit environment, when I finally got it running, I couldn't get into sound settings, it froze right when I clicked the Sound options... So I decided to make the 32 bit environment, so I used debootstrap and schroot and now I have fully functional 32bit chrooted system. It does the same thing all over again! it drives me crazy... I should probably tell you, I use pulseaudio. This makes it a little hard to like the distro for me... I used to be an ArchLinux user for quite few years, but I didn't want to solve so many things every day, so I went with debian
View 1 Replies
View Related
Apr 6, 2010
I hava a ASUS P5GC-MX/1333 and I want to install the driver from my Realtek audio, because, in windows 7 the volume is very loud, but in fedora even in the maximum is very low.
View 10 Replies
View Related
Jun 17, 2015
debian 8 64bit
How do I enable louder than 100% in sound settings?
View 4 Replies
View Related
May 28, 2010
I just did an upgrade from F12 64bit to F13 64bit and sound causes problem, It does work, but even when I set everything to max, the sound level is still way too low. I checked pulseaudio volume control, sound preferences etc, everything seems to be normal.
View 2 Replies
View Related
Apr 9, 2011
This computer runs KDE4.4, Debian Squeeze, used by my wife who is a complete computer illiterate. Sound is provided by a HDA Intel card with controller with Realtec ALC888 chip. The C200 webcam is connected but not use for sound.When she starts the computer, she is not able to use Skype: the sound is not captured. She is barely able to find KMixer, but when she does, there are 2 input controls shown:- Internal Audio Analog Stereo- Logitech C200 Analog MonoNothing more, no controls, no flags, no way to add any more controls, not even through settings or whatever.
<rant mode>What else did you expect in KDE4. This desktop is famous for oversimplification of settings, making sure that whatever you want o change is not possible thru the GUI. But gets controlled thru KDE anyway in the way you didn't intend.</rant mode>Anyway, when I open alsamixer, not less than 6 capture controls are available:
- Front Mic Boost (level)
- Mic Boost (level)
- Capture (flag + level)
[code]....
View 5 Replies
View Related
May 18, 2010
Using Dell Inspiron 1564. In windows 7 and other distros like ubuntu, openSUSE sound was perfect. However the sound here is pretty low. Not sure if there's some configuration I am missing. I ran alsaconf, maxed out the bars in alsamixer and did a alsactl store. But the sound is still low.
Code:
# lspci | grep Aud
00:1b.0 Audio device: Intel Corporation 5 Series/3400 Series Chipset High Definition Audio (rev 06)
02:00.1 Audio device: ATI Technologies Inc RV710/730
View 14 Replies
View Related
Jan 26, 2011
Once I bring up alsamixer, or mixer from menu, how do you save the settings and have them restored next boot so you don't have to always set them again after a re-boot up?
View 1 Replies
View Related
Dec 26, 2015
Jessie 8.2
Cinnamon 2.2.16
Sound settings crash when accessed from cinnamon-settings menu:
Code: Select all$ cinnamon-settings
Could not find bluetooth module; is the cinnamon-control-center package installed?
__init__ took 79.102 ms
(cinnamon-settings.py:3856): Gtk-WARNING **: Symbolic icon cin-audio-input-microphone-low-symbolic-ltr of size 16 is in an icon theme directory of size 128
[Code] .....
Segmentation fault
Here is the output when trying to open 'Sound' directly:
Code: Select all$ cinnamon-settings sound
Unknown module sound, using cinnamon-control-center
Could not find bluetooth module; is the cinnamon-control-center package installed?
(cinnamon-settings.py:3877): Gtk-WARNING **: Symbolic icon cin-audio-input-microphone-low-symbolic-ltr of size 16 is in an icon theme directory of size 128
[Code] ....
Segmentation fault
I've never been able to get bluetooth working. Installed version is:
Gnome-bluetooth (3.14.0-2)
View 2 Replies
View Related
Oct 20, 2014
Here is some info about my system:
System: Host: notosh Kernel: 3.16-2-amd64 x86_64 (64 bit) Desktop: KDE 4.14.1
Distro: Debian GNU/Linux jessie/sid
Machine: System: TOSHIBA product: Satellite C75D-B v: PSCLEU-003002
Mobo: TOSHIBA model: Portable PC v: MP Bios: Insyde v: 1.10 date: 04/30/2014
CPU: Quad core AMD A6-6310 APU with AMD Radeon R4 Graphics (-MCP-) cache: 8192 KB
Clock Speeds: 1: 1000 MHz 2: 1000 MHz 3: 1000 MHz 4: 1000 MHz
[Code] .....
View 5 Replies
View Related
Jun 23, 2011
Not sure if others have noticed this. When I go into sound settings, click the output tab, select the sound device I want to edit and change the bass levels etc, close the window and go back in all the settings are reset to default and no changes are saved.
If I leave the window open and make the changes they are reflected in VLC for example, but if I close the window it again resets to defaults and my Bass is back at Maximum....
Is this a BUG I should report or is there something I can download to get this configured elsewhere or to fix this issue? I seem to recall something similar in Fedora 14 that was fixed, but I cant remember how I did it now
View 2 Replies
View Related
Jan 3, 2010
I am unable to hear any sound at all using my M-audio delta 44 soundcard (which works fine in Windows - Dual boot).how I can get this working?
View 4 Replies
View Related
Dec 20, 2010
I have been using Ubuntu as my main OS on my desktops for a couple of years now. Started off with a HP with a Creative Labs XiFi soundcard, but am now using a Dell with a Creative Labs Audigy. Sound worked perfectly on the Dell since a clean install (about 7 months ago). I turned it on a week or so ago, and no sound! Even the little sound indicator in the notification area has gone.
View 8 Replies
View Related
Jun 7, 2011
After installing I was not able to get many of the audio programmes to work. After some reading, I realised that this was probably due to jack not starting.
I was unable to get jack to start normally but have been able to get it started with the playback only option selected. Programmes that use jack now work, however there is no sound once jack has been started. The sound does work in other programs when jack is not started. Strangely, I only have to open qjackctl for the sound to stop, and jack is not even started. Initially I thought these problems were due to my sound card not being supported, but I believe that alsa support was added for the via 1708 codec at some point. I found that support had been added in a document showing the changes between alsa versions; however I cannot find the exact model listed as a supported sound card on the alsa site.
I believe that altering jack settings could fix the problem, as i have been able to get audio to work in hydrogen by selecting plughw:0 but there is still no sound in other programs. I have tried altering many other settings but to no avail, however I do not really understand the meaning of the settings that i am adjusting.
Does anyone know what settings to adjust or know something else that might fix this problem so that sound works once jack has been started?
Also, would programmes that use jack such as audacity, hydrogen, and ardour work with pulseaudio as the main sound server if I were to install normal ubuntu - it might be worth seeing if my soundcard works with the puleaudio sound server
if this helps, here is the error message received when jack does not start when the normal duplex option is selected.
21:24:04.867 Patchbay deactivated.
21:24:04.868 Statistics reset.
21:24:04.886 ALSA connection change.
Cannot connect to server socket err = Connection refused
[Code].....
also, when i open alsamixer in the terminal for some reason the headphone part is greyed out, even when the sound is working before qjackctl is opened.
View 4 Replies
View Related
May 1, 2010
I've got a custom compiled kernel, just built on Lucid 10.04 from the kernel sources.System works fine, except for sound.When I log in as normal user and try to play a wav file using.The sound file is being played, but I hear no sound.However, when I do "sudo -s" and become root, execute the same mplayer command then I can hear the sound.My Sound preferences shows no input device and only "Dummy Output" as output device.On the generic kernel as came with the Lucid 10.04 CD, sound preferences shows different devices.The strange thing is: when I compiled my custom kernel, I changed nothing to the sound options in the kernel config file.
View 6 Replies
View Related
Nov 29, 2010
For a couple of days ago, maybe a week or two I beguinne to get a 'snap-sound' in my compurt sound, like an eletrick charge or someting. I comes with about a minutes period. I resently find out that it came from the center-speaker. I run Ubuntu 10.04 LTS and have this sound-card: 00:09.0 Audio device: nVidia Corporation MCP73 High Definition Audio (rev a1)
My speaker system is Logitech X-530 I have located the problem to center-speaker, but the snap-sound only disappear if I mute the center, not lower the input, in the GNOME ALSA Mixer. I have tried to disconnect the antenna to the analoge-TV-tuner. Has anyoe a similar problem, and a trick to fix it? I don't know if it's related to any recent update of the system?
View 1 Replies
View Related
Dec 14, 2010
Playing a song works at first; then it quits after 1-5 minutes. If you select a different output device, it will work for another 1-5 minutes, but switching back to an already used up device will not play sound. Running 'sudo killall pulseaudio' resets everything and each output device works for another 1-5 minutes. This is on on 9.10.
Code:
lspci -v
00:00.0 Host bridge: Intel Corporation 82845G/GL[Brookdale-G]/GE/PE DRAM Controller/Host-Hub Interface (rev 02)
Subsystem: EPoX Computer Co., Ltd. Device 4002
[code]....
View 6 Replies
View Related
