I have a piranha magnum mp3 player which is connected with usb cable. When i connect the player it's resetting. dmesg output;
Code:
[11326.752063] usb 2-3: new full speed USB device using ohci_hcd and address 2
[11326.964442] usb 2-3: configuration #1 chosen from 1 choice
[11327.742086] Initializing USB Mass Storage driver...
[11327.742319] scsi2 : SCSI emulation for USB Mass Storage devices
[Code]...
after few days of hard work about redhat cluster and piranah, i have done 90% hopefully,but i am stuck with iptables rulesi am attaching full piranah server screen shot of my network .please have a look and please tel me, what else to do in piranah server ...a) from firewall (Lynksys) what ip shall i forward port 80 ?? ( 192.168.1.66 or 192.168.1.50 ??)b) Currently its looks like http request is not forwarding from Virtual server to real server , what iptables rules shall i write ?(Please have a look to iptables rules)also, this link for my piranah server setupi guess i am stuck somewhere where i need some experts eye to catch it upso please look at the all the pictures , ifconfig and iptables rulesifconfig :
ifconfig
eth0 Link encap:Ethernet HWaddr 00:0F:3D:CB:0A:8C
inet addr:192.168.1.66 Bcast:192.168.1.255 Mask:255.255.255.0
[code]...
This is my first time to test piranha and I can't understand couple things:
1. how to setup public floating IP address between active and backup piranha node?
2. does piranha nodes have to run on public IP?
3. how to connect active piranha node with backup nodes?
4. does piranha only support http and ftp?
5. do I need to create common login for load monitor so that piranha could login to real servers and check the load ?
6. what is the hardware requirement for piranha to run on heavy loading site? I am using VMs all the time.
I am using web gui interface with minor file editing, but I prefer done it with GUI. Currently running Centos 5.6 x86_64.
I'm trying desperately to get ipvs load balancing up and running using the RedHat Piranha utility.I'll post my config files later in the message.In order to simplify things, I've only got one LVS director running (no backup director), and I've only got one realserver running.I can ping the realserver static ip from the LVS director when the pulse daemon is NOT started.About one minute after I start the pulse daemon, I can no longer ping the realserver static ip.I can ping the realserver static ip from any other box on the subnetThe LVS app requires that the LVS director be able to ping (or CONNECT) the realserver as a sanity check to make sure the realserver(s) is/are still alive.
/var/log/messages entries:
Jul 28 10:49:21 emclb98 pulse[11281]: STARTING PULSE AS MASTER
Jul 28 10:50:51 emclb98 pulse[11281]: partner dead: activating lvs
[code]....
I seem to be having a strange problem configuring Piranha to load balance (Direct route) 2 ports across 2 w2k3 servers in a test environment. What is strange is that 1 of the ports are working fine but the other port doesn't work. I've read many how-to and after many frustrating hours I disabled the firewall, iptables and arptables services and one of the ports are load balanced across the 2 real servers. Here's the environment.
[Code]....
I can telnet from the client to the realserves on both ports and it's works. When I telnet to the VIP only one port gets through and the other gives me "could not open connection to host port 32777 : connect failed. The configuration in Piranha for one port is the same as the other. I can't help but think that some other configuration for port 32777 was missed.
So I was fiddling around with things earlier today, trying to figure out how to use ssh to remotely view a desktop, and I accidentally set the DISPLAY property to something else using Code: export DISPLAY=something I can't remember.But I don't know how to set it back, nor what it should be set back to.
View 1 Replies View RelatedA simple and small problem but annoying all the same...I don't like having the downloads/pictures etc bookmarks in the places menu so I remove them but every time I restart my machine they come back.
View 7 Replies View RelatedI am using a Canon MP560 and every time I try to print something I have to go back into the printer settings and change the settings from "From Driver" to grayscale and it is really annoying. How to I set it so it stays like that?
View 1 Replies View RelatedI have Lucid. I played with compiz and emerald. I put everything back. But my theme is no longer as it was before I started. Similar, but the icon set and windows are a little different. Under 'appearance' the theme, which I'm told is called 'light' isn't visible. And I don't know the original icon set. How can I restore my desktop to look as it did on installation.
View 1 Replies View RelatedI added two lines on the Xcorg.conf file to try and add forward/back buttons on my mouse but after I restarted Ubuntu will not boot past the splash screen. Can I reset Xcorg.conf in recovery mode to undo things?
View 1 Replies View RelatedI'm trying to reset the password that Evolution prompts you for when working with certs.Specifically, the "Enter the password for 'NSS User Private Key and Certificate Services'" password. I followed the instructions here, but they seem to be out of date. The files cert8.db, key3.db, and secmod.db are not in my ~/.evolution, nor was I able to find any files with those names in any folder referencing evolution in my home folder.
View 1 Replies View Related10.10 x64. This did not occur before I dist-upgraded from 10.04.I use a USB headset that has always "just worked," as long as I have it selected under both Input and Output in Sound Preferences.Now, periodically I'll hear a pop in my headset, the music/sound will mute for a second, and then come back louder. What's happening is that in Sound Preferences, the default selections are being reset. The sound comes back louder because of my volume settings. Additionally, on boot I run a script to set a few keybindings I use for Ventrilo. When all of this happens, I have to run this script again to get the bindings back.
To fix it, I have to go into sound preferences, select my headset in both Input and Output, fiddle with the volume so it returns to normal, and then rerun my binding script.My first guess was that the headset's connection is "farting", like it'd do a disconnect/reconnect, and Ubuntu deals with it by selecting visible hardware. But I can't for the life of me reproduce it. It just happens randomly.I guess it's possible that the script's issue is related to ventrilo/wine, and not a direct result of this sound issue. I'm mentioning it in case it isn't.I reproduced it by pulling the USB cable out and putting it back in. So there's either a short or Ubuntu is resetting the USB port periodically. Does it drop ports like that?
As said in the subject, desktop decoration settings keeps resetting after rebooting. For me it is quite boring and annoying. Why it happens? Ubuntu should keeps my preferences (as in previous versions - my Ubu 10.10, Unity)
View 4 Replies View Relatedi recently installed ubuntu 10.10 64-bit on my laptop and installed all the drivers and updates i saw. When i first started it up my top panel was a solid gray and had a classic look, i saw online that i had to do Alt-F2, type gconf-editor then go to apps,panel,global click locked down, then i log out, log back in and it is fixed with my system theme. after i restart my computer it has the same classic look, and i have to go back to gconf, log out, relog, log out, relog and it finally works. why is it doing this?
View 2 Replies View RelatedAfter installing Windows 7 I didn't know how to restore GRUB and I installed a new Ubuntu 10.4, so that now the former installation is in 6th position on the booting screen.I tried to edit the "menu.lst" but, now in Grub 1.9 I can't find the "menu.lst"
View 2 Replies View RelatedI tried to adjust my system clock to daylight savings time, but now everytime I restart the computer it's reset. For example, I set the clock to 11:40 AM, Mon. 15 Feb. Upon restart, it's now 12:05 AM, Tue. 16 Feb. I've readjusted the clock several times, and it resets at every reboot.
View 3 Replies View RelatedI have a problem with my client PC. PC has a static ip 10.162.41.159 (supplied by editing and saving eth0 file, not by command line) in LAN. netmask is 10.162.41.128 and gateway is 10.162.41.129. My problem is after rebooting, ip is resetting into 10.162.41.130. It happens after rebooting even network cable is removed!!!if i restart network service ip will reassigned into 10.162.41.159. i dont know why this happens.
View 4 Replies View RelatedMy problem is I need a broad method to reset the rpm database on my [almost] up-to-date RHEL 5 WS system.
I do not fiddle around with installing new things on this system or perform strange configurations.
A little over a week ago, I started encountering packages in conflict. I entered a RHEL help desk ticket that has been open for over a week. The person assigned the ticket is trying to clear one error at a time.
Once I remove the package in conflict, I get pending transactions; follow the instructions to clear those; and then get more conflicts. I'd like to reset everything without re-installing.
In Ubuntu 10.04 using Document Viewer 2.30.0 I've noticed that every time I open the program or a PDF file I haven't opened before the window size seems to reset to default. Thumbnails sidebar re-enables, view goes back to "Fit Page Width" and the actual size of the window goes back to being very small (default).
View 4 Replies View RelatedI was curious about the XF86Home shortcut for home folder, so I switched to Alt+Home. That's great, but just curious, how do you reset it to the default settings?There should be a configuration file somewhere, but anybody knows where exactly?
View 2 Replies View RelatedI upgraded Ubuntu a few times now (since 7.10) - and it still seems to be going well. I really enjoy some of the new features in Lucid - Ubuntu just keeps getting better! I dual-boot with Windows, but I use Ubuntu much more than I do Windows. I have a minor problem - my resolution keeps on re-setting itself to 1440x900 rather than 1920x1200. I think I've managed to isolate the problem. I have a single monitor, a DELL 2408wfp. I have the VGA and DVI connectors connected to the monitor at the same time - primarily because I could not get DVI to work under Karmic. I have disabled the VGA mode, so that only DVI is being used (i.e. I did this via ATI Catalyst Control Center).
When the computer boots, the screen defaults to 1440x900, on DVI. I use ATI Catalyst Control Center to change the resolution. Strangely enough, the ATI Catalyst Control Center tells me that 1920x1200 is the "Preferred" resolution. I select the preferred resolution, and it stays at that resolution until I reboot. On re-boot, the resolution changes back to 1440x900. Suspected theory is as follows:
1. Computer starts up. Computer says "do I have VGA signal"? If so, display in VGA for the BIOS setup, boot menu etc.
2. Gnome kicks in and determines it's in VGA mode. VGA likes to use 1440x900 because it feels like it. Computer changes resolution to 1440x900.
3. Gnome says "I should be using DVI mode, change to DVI".
4. What Lucid Lynx forgets to ask is "what resolution should I be using for DVI" - and uses the VGA resolution instead.
I tested this theory by removing the VGA cable from the monitor and re-booting. For the first time ever, Ubuntu booted into 1920x1200. I don't consider my work-around to be a fix, because I'm putting wear and tear on my VGA cable - as without VGA, I don't have fall-back if the DVI display driver stops working again.
I'm facing bit of a conundrum with my new server. It is essentially a distributed-virtual Plesk Virtuoso container with a rather simple LAMP setup (PHP5 etc) and virtual hosting. Running 10.04 LTS.
The issue is that on each reboot, the /etc/hosts and /etc/hostname files are reset with their original configs causing the virtual hosting to break, i.e. rather than hosting the vhosts correctly, it essentially routes all traffic to /var/www, or essentially 000-default ~ this beats the whole point of vhosting in the first place!
Is there any way to get around them being overwritten at boot? A very crude workaround would be to set a script to load at boot via init.d and have it rewrite both files to their correct configs - of course, I have no idea as to the point during boot at which they get replaced.
Every time I start up my webcam in cheese, a folder is created called 'Webcam' in my home folder, and if this folder is deleted, it will be recreated when another session is started, i would ideally like to just have this folder hidden but if i do that then it will be recreated, so is there anyway of having the folder created as a hidden .Webcam? there is no option for this in the cheese menu.
View 6 Replies View RelatedWhen I sudo apt-get install['ed] kolourpaint, I had to download all the stuff necessary for a KDE environment, I think. When I restarted the machine, everything went from black to light grey. Even NetworkManager went from the three or four curves to the pair of blue monitor computers. How do I restore the desktop environment settings?Since things changed after a command-line instruction, feel free to post the appropriate command-line instruction.
View 2 Replies View RelatedI'm setting the root window background to a gradient with the following command:
Code:
DISPLAY=:0 fbsetroot -gradient Elliptic -from blue -to black
What I would like to do next is to display a small logo in the center of the background without resetting the root window background color. Right now I tried the following two commands and they both reset the root window to a solid color... I would like to keep the gradient color.
Code:
vmsetbg -e logo.png # resets the root window
fbsetbg -c logo.png # also does the same thing
I cannot use just a single image because the same image has to look good on all screen sizes from netbooks to 52" TVs
My issue is like this: I have a laptop (dell vostro 1400, NVidia 8400M video card) running Fedora 12 up to date. My desktop is KDE 4. I usually run the laptop connected to the power outlet, so my power profile is set to "performance". This power profile sets the screen brightness to the maximum. However, when I'm in the dark, I want to lower the screen brightness. The shortcut keys work, and the screen brightness is lowered. However, for some reason, after about 30 seconds it resets itself to the highest brightness setting. No matter how I set the brightness, it will always reset itself. Any ideas what can i do to correct this?
View 3 Replies View RelatedI've got on board HDA ATI SB using VIA VT1708S chipset. I have to get into Alsamixer everytime I reboot the computer to reset the 'Master' volume level so that I can hear the sound on my computer. I also have a Logitech 9000 webcam with built in mic also.. It is my understanding they may both may be conflicting with one and another. They both work. Alsamixer doesn't have a setting that allows you to save your levels once they have been adjusted, just 'esc'. How can I set alsa mixer up to keep my settings so that I don't have to continually reset them when the computer is rebooted?
View 5 Replies View RelatedI have been running Fedora 15 on an IBM Thinkpad R61 for some time now.Wireless has an intermittent problem. Icon shows me being connected nut unable to view anything. This is easily rectified by resetting wifi.Whilst this is intermittent it does get a little annoying.Not sure what information anyone would need from me to assist as I am a bit of a newb.
View 9 Replies View RelatedI was away for about a week, and on being back home I got on my notebook MAC but to find my MAC could not get to the internet! The Modem and the router were already switched on. Usually, this gave no problem. However, this time after repeated tries I was very sure something must be wrong. To cut the story short I managed to find a friend who knows another guy who is a qualified computer techy. He actually helped reset the whatever settings and upon getting it all done I asked what was the root of the problem. His explanation was "things like this does happen and we need to reset the system".
Just to make sure I will not need to bother my friend and his friend should thing like this crop up again, I really appreciate to get a guide on what you actually do to reset whatever that needs to be reset.
/etc/passwd permissions keep getting reset to 600. When I set it to 644 as su, it eventually changes back.This occurs on my openSuse10.2 machine but not the openSuse 11.1 machine, but I assume that is irrelevant. Is there something that got tweaked that I need to change in Yast to stop this from happening?
View 5 Replies View Related