OpenSUSE :: Change Some Settings Of Printer Using HPLIP?
Apr 30, 2011When I try to change some settings of my printer using HPLIP it tells me to add myself to the lp an sys group. Is that safe ? What are those groups used for ?
View 9 Replies
ADVERTISEMENT
Fedora Networking :: HPLIP Port Settings - Printer Not Recognized
Aug 5, 2010I have recently installed Fedora 13 on my netbook. I wish to use my HP Officejet via the HPLIP utility. The problem with this is that when I have the firewall turned on, the printer is not recognised at all during setup. When the firewall is switched off, the printer is recognised. The printer in question is an HP Officejet 8500a which is connected via Ethernet cable to a wireless router. I would like to know if there are any network ports (that's used by HPLIP) that I could 'turn on' in the firewall that could let my computer recognise the printer.
[Code]....
Ubuntu :: Printer Software - Change From HPLIP To Brother?
Mar 9, 2011I plan on changing brands in printer from HP to Brother in the near future. Will I need to completely remove HPLIP before installing Brother printer software pkg on Ubuntu 10.04?
View 6 Replies View RelatedOpenSUSE :: Change Default Printer Settings In Firefox (GTK Applications Under KDE)?
Jul 25, 2010I'm trying to figure out how to change the default settings for my printer under Firefox. I'm mainly interested in changing the default print resolution and the pages-per-side layout setting I can change the settings for all KDE applications through [URL], but I can't seem to be able to find the respective dialog for Firefox / GTK applications.
Firefox itself doesn't seem to have a dialog for the printer default settings; I've looked into about:config but all the value names are rather confusing.
My system environment:
openSUSE 11.3
KDE 4.4.4
Printer: Brother MFC-7420
Ubuntu :: Warning: Printer Is Not HPLIP Installed. Printers Must Use The Hp: Or Hpfax: CUPS Backend To Function In HPLIP
Feb 15, 2010Deskjet-F4400-series
--------------------
Type: Unknown
Installed in HPLIP?: No, not using the hp: or hpfax: CUPS backend.
Device URI: usb://HP/Deskjet%20F4400%20series?serial=CN9C1CK70705C5
PPD: /etc/cups/ppd/Deskjet-F4400-series.ppd
[code]....
how do I get the printer installed in hplip? I can print but cannot scan. xsane will not recognize printer. Jaunty 64bit 2GB Ram 350GB HD
OpenSUSE :: HPLip Stops Communicating With Printer?
Feb 10, 2010Everytime I get HPLip working with my printer, it will only work until I shutdown the computer. On next restart, it no longer works and the only way to get it to work again is to delete the printer configs in hplip and re-create them!
View 2 Replies View RelatedOpenSUSE :: 11.3 - Hplip Complaining (Set Default Printer)
Nov 15, 2010Trouble with cups - Opensuse 11.3 x86-64
Hplip installed
prrinter = HP photosmart 4280
No way I can set the printer as default printer in cups as in 11.2. Now hp-device-manager. Part of hplip is complaining "set the default printer"
OpenSUSE Hardware :: HPLIP With 11.2 64-bit - OfficeJet Pro L7680 - Don't Get The Printer To Work
Dec 5, 2009after an update to 11.2 (from 11.1), 64 bit, I don't get the printer to work. I reinstalled the driver and checked in cups: it says that the printer is available and waiting for a job. When I send something to the printer, nothing happens. The priont job will be stopped immediately. The printer is properly connected: xsane finds the scanner, that is part of the printer, without a problem. The printer is also ok: I can copy documents, it just works fine.
[Code]...
OpenSUSE Hardware :: 11.3 Hplip Printer Queue Setup Failed?
Jul 31, 2010I just installed opensuse 11.3 and was configuring the printer (via http) as usually using the HP Device Manager. But this time I got these error message:Printer queue setup failed. Please restart CUPS and try again
These lines were generated in the error-log of cups:
E [31/Jul/2010:23:30:35 +0200] [cups-driverd] Bad driver information file "/usr/share/cups/drv/sample.drv"!
E [31/Jul/2010:23:30:35 +0200] [cups-driverd] Skipping "/usr/share/ppd": loop detected!
[code]....
Hardware :: 10.10 Installing HP Deskjet 1000 Printer - Error "Printer Requires The 'foomatic-rip-hplip' Program"
Feb 6, 2011I have Ubuntu version 10.10 and I'm trying to install the HP DeskJet 1000 J110a printer. I have HPLIP version 3.11 (the latest version I believe). The printer shows up but when I try to print the error message reads: Printer requires the 'foomatic-rip-hplip' program but is not currently installed.
View 2 Replies View RelatedFedora :: Hplip Block On LPT Printer
Oct 15, 2009I installed a LPT1 printer a hp office jet T65 to add this printer was requested hplip I install the software that should de printer driver, when I print a file the file remain only in processing it wont go forwarder then that.I hope I was explicitly enough.
View 3 Replies View RelatedHardware :: HPLIP - Printer Does NOT Work
Nov 4, 2009I have Ubuntu 9.04, and a HP laserjet 1018 printer.
I install the printer using:
And when it ask me about plugin I give the path to it. (the 3.9.2 version of the plugin, because Ubuntu 9.04 has the 3.9.2 version of hplip)
well I install the printer, everything works perfectly. .... but, when I turn off the PC, and turn it on again, the printer does NOT work!, I send work for being printed but mothing happens , Ubuntu tells me that the job was printed but ... no case, my printer does not print it. I have to install it again since cero. what can I don to stop install it every time I turn off the computer ?
Fedora Installation :: Use HPLIP-Gui But It Doesn't Even See The Printer At All
Jun 14, 2009I did an upgrade using preupgrade program and it went very well. However, I have lost my HP 1020 printer. Can anyone assist with this. I tried to use HPLIP-Gui, but it doesn't even see the printer at all. The other problem is that I get the following message when trying to use Yumex:
Failure getting http://rpm.livna.org/fedora/11/i386/...ta/repomd.xml:
13:09:06 : --> [Errno 14] HTTP Error 404: Not Found
13:09:06 : Trying other mirror.
13:09:06 : Failure getting http://livna.cat.pdx.edu/fedora/11/i...ta/repomd.xml:
[Code].....
Ubuntu :: Printer Won't Work After HPLIP Upgrade?
Jan 27, 2011I'm running Ubuntu 9.10. The Update Manager did an update to HPLIP, the Hewlett Packard Linux Internet Printing software, one or two days ago. When I went to print today, the HP Officejet 4500 printer showed up in Open Office when my mouse pointed to the printer icon. But, the printer wouldn't work. Then I noticed that the HPLIP Toolbox icon was moved from the Applications - Accessoires folder, to the System - Preferences folder. I reinstalled all the HPLIP software, using the Synaptic Package Manager. When I click on the HPLIP Toolbox & run the HP Device Manager, it says "No Installed HP Devices Found".I was a little surprised to see the software upgrade caused the HPLIP toolbox to move fromhe Applications folder to the System folder. Because of this, I suspect there may be a bug in the upgraded software? Is anyone else having this problem?
View 1 Replies View RelatedUbuntu :: HPLIP Option Not Present When Setting Up Printer?
Apr 20, 2010I just built a system and put a fresh install of ubuntu 9.10 on it. I have two other systems with 9.10 as well. On both of them the printer (an HP Officejet Pro 7680 set up directly on the network) is shown as an HPLIP printer with a URI that starts with hp:/net/ . When trying to set up this printer on the new machine the option for HPLIP is not present and the URI starts with dnssd://. I can only set up as and LPD Network Printer or an Appsocket/JetDirect network printer. Yes I have the hplip stuff installed on the new machine. My main concern is actually using the scanner function with Xsane. The other two machines scan just fine, the new one can't find any devices. I think this must be connected with the lack of HPLIP functions. This is with the AMD64 bit version of 9.10
View 1 Replies View RelatedDebian :: HPLIP Network Printer On Lenny System
Oct 18, 2009I just installed HPLIP using Synaptic package manager. One of the configure parameters (shown by 'hp-check -r') is
Code:
Am I correct in assuming that this means that a network printer will not work? Is there a way to override this while still using synaptic package manager? Would I then be able to use a network printer?
I have my eye on the HP photosmart plus B209A - and it looks like HPLIP supports it (there is a ppd file for it).
Software :: Install The Printer Hplip Raises The Error ?
May 25, 2009I have an HP printer - C4200 series; Works fine in Slackware.
I am trying to get it to work in mepis-8.
Last thing done: hplip and cups were both un-installed and re-installed with no errors
When I try to install the printer hplip raises the error:
Quote:
printer queue setup failed. Please restart cups and try again.
This was done more that once; the last time after removing and reinstalling both cups and hplip.
I tried to install the printer using cups and get the error:
Quote:
Slackware :: CUPS And HPLIP Duplicating Printer Entries - 13.1
Jul 18, 2010I have an HP Photosmart USB printer that I configured with HPLIP (which seemingly "exports" into CUPS). All is well until the printer is turned off and then back on again sometime later: somebody, somewhere automagically adds the printer to CUPS so that I have two, count 'em, printers defined.
Code:
Some UDEV rule, some other thing?
OpenSUSE :: Printer Default Settings In KDE4?
Nov 2, 2010how can I make KDE applications to use duplex printing as default? In CUPS, I changed the default settings to "long edge binding". It works in non-KDE Applications like Openoffice, but in e.g. Okular I always have to set it every time I print. I'm using Suse 11.3 with KDE4.
View 2 Replies View RelatedOpenSUSE :: Firewall Settings For Shared Printer?
Apr 6, 2011what I need to do to the firewall in order to make a shared printer available to other machines on my network?
I have the printer set up and have tested it with the firewall switched off, but as soon as I restart the firewall, the printer is inaccessible.
I thought that all traffic on the internal network was allowed, but it seems that I need to create an explicit rule in order to get the shared printer working. Unfortunately, I haven't been able to figure out how to do that yet.
OpenSUSE Hardware :: How To Transfer Printer Settings
Jan 5, 2011I have two 11.3 systems, one with my printers set up. Is there a basic method to export or transfer my printers' settings and drivers to the other system? Running Gnome on both.
View 1 Replies View RelatedSlackware :: --current - Hplip Won't Setup To Network Capable Multifunction Printer
Mar 14, 2011I'm wondering if anyone else has this issue before I send a note off to Slackware on this.
The --current hplip package can't seem to actually complete the installation of a networked hp printer that has the printer physically plugged into the network.
The hplip app initially does detect the device, then I click next, then it says installation failed as it can't connect to the device.
Perhaps I'm doing something wrong.
I am however able to build, and run an older hplip that --current used a while back and it works splendid for adding a printer over the network.
I'm using version hplip-3.9.4b-i486-1 but I know that's not a big help to the project.
Fedora Hardware :: HP Printer - HPLIP Driver In The Repo Doesn't Work Correctly
Apr 22, 2010I recently had problems with my HP printer in Fedora 12, where as I never had a problem with it in any other distrubution.... For some reason, the HPLIP driver in the repo doesn't work correctly... I don't know why... but I kept getting errors with "error: Printer queue setup failed. Please restart CUPS and try again."
I tried every suggestion I found... which was installing extra dependencies, disabling firewall, disabling SELinux and a whole bunch of other stuff... but nothing worked... THEN finally I decided to use the HPLIP driver from the HP website... it was a .run file... and I executed it, and my printer has worked perfect eversince..... my question is.... has anybody successfully installed their hp printer from the hplip driver in the repo's..??? I don't know why it didn't work for me, and i've seen other fedora users complain of the same thing? maybe theres something wrong with the package? or its not pulling in a needed dependency? I don't know...
Ubuntu Installation :: Install Hplip To Enable Hp Printer Driver, Understood That 9.04 Is Obsolete And No More Support For It?
Jun 11, 2011I have ubuntu jaunty 9.04 installed in my system(thats my only OS.. no dual boot). When I tried to install hplip to enable hp printer driver, I understood that 9.04 is obsolete and no more support for it. I want to upgrade now. Update manager shows '10.04' for uogradation but it seems I cannot jump from 9.04 to 10.04 without getting into 9.10.
View 2 Replies View RelatedOpenSUSE :: How To Change Email Settings
Jun 4, 2010Virgin has decided to change its email settings, but doesn't support Evolution, so I am not clear on how to implement some of the changes.This is what it asks us to do:Sending mail (SMTP)
SMTP server name
smtp.virgin.net
SMTP SSL
[code]....
OpenSUSE Network :: Want To Change DNS Settings
Feb 26, 2010I want to change DNS settings. How do I make it from yast?
View 1 Replies View RelatedOpenSUSE :: How To Change Font Settings For Other Languages
Jul 17, 2010I just installed openSUSE 11.3 (Gnome). I am using Korean language, but I don't want to make Korean language as my default language. So I installed Korean lang as secondary language. It works well.But the problem is Korean font. Actually BEFORE installing the language, the font look much nicer. But as soon as I installed the language, the font became ugly.Even if I uninstal the language, the font still remains the same (ugly).
Where is the font setting for other languages stored? It would be nice if I can set default fonts for Korean language manually.
OpenSUSE :: 11.4 KDE Change Power Settings For Display?
May 15, 2011how to disable the power settings for my monitor so that it always stays on.
View 2 Replies View RelatedOpenSUSE :: KDM Login Settings Grayed Out. Can't Change KDM Theme?
Jul 5, 2009I'm on openSUSE 11.1 KDE 4.3 RC, and I'm using the kde-branding-openSUSE with KDM from the factory KDE repo, and factory community repo - everything is up-to-date.For some reason my KDM login settings screen is ALL grayed out, so I can't change the theme/settings. I know that you can change it by going to yast and editing the /etc/sysconfig thinghich I actually tried doing, and failing, which is odd because I changed it once a ltime ago to glassified, but can't manage to do now...) I don't want to use a theme, though, but actually use my current wallpaper and set the settings in the login manager to something of my preference.
View 9 Replies View RelatedOpenSUSE Hardware :: Unable To Change Nvidia Settings?
Sep 4, 2010I'm having the following problem with SUSE 11.3 and my Nvidia Geoforce 7300 GT. I have the driver installed but am unable to change the resolution in the Nvidia configuration X-Server. It seems it is limited to the following 640x480 and 320x200. fix this as it looks awful and I know that I should have greater resolutions.
Please find my xorg.conf listed below
# nvidia-xconfig: X configuration file generated by nvidia-xconfig
# nvidia-xconfig: version 256.53 (buildmeister@builder97.nvidia.com) Fri Aug 27 20:55:22 PDT 2010
Section "ServerLayout"
Identifier "Layout0"
Screen 0 "Screen0"
[Code]...
