how can I make KDE applications to use duplex printing as default? In CUPS, I changed the default settings to "long edge binding". It works in non-KDE Applications like Openoffice, but in e.g. Okular I always have to set it every time I print. I'm using Suse 11.3 with KDE4.
View 2 Replies
I'm trying to figure out how to change the default settings for my printer under Firefox. I'm mainly interested in changing the default print resolution and the pages-per-side layout setting I can change the settings for all KDE applications through [URL], but I can't seem to be able to find the respective dialog for Firefox / GTK applications.
Firefox itself doesn't seem to have a dialog for the printer default settings; I've looked into about:config but all the value names are rather confusing.
My system environment:
openSUSE 11.3
KDE 4.4.4
Printer: Brother MFC-7420
Using openSUSE 11.2 & 11.3, where should I look for the default printer settings?
I have a Brother HL-1440 laser which for some reason prints right down to the bottom of the page cutting off the top part of the last line on that page. The default settings for the top and bottom margins are 0.50 inches. During installation using Yast2, the test page printed with correct borders.
When I change the bottom margin in options (from Ctrl-P), the page prints with the bottom margin set to 0.50 inch. The problem is I have to reset that margin every time I print a new document.
Where can I change that default setting? I've searched in /etc, /var, and /home but can't find it.
Whenever I open a Konsole via the control panel widget the font in the console window is Monospace 8. Increasing the font via settings remains in place only for the time the window is active. When opening Konsole again the font is set to tiny Monospace 8 again. I have checked the settings in the *.profile files in ~ /.kde4/share/apps/konsole. They all contain my preferred font. Still, Monospace 8 comes up. Where else should I look. I have checked all *.rc files too, that are related to konsole.
View 1 Replies View Relatedwhere the printer icon is hiding so that I can stop a printer from printing something? I can't find it anywhere even though the printer itself works just fine.
View 2 Replies View Relatedafter fresh install of Opensuse 11.2 and online update, the window decoration settings disappeared from my "configure desktop" appletNow I'm doomed to some default window decorations.
View 9 Replies View RelatedI have found the way to do this for KDE 3.x.x but not for KDE 4. Konqueror is the default web browser which opens when you click a link, but I want to use FireFox instead. Where must I go for KDE4 to change the default web browser to something else?
View 7 Replies View Relatedwhat I need to do to the firewall in order to make a shared printer available to other machines on my network?
I have the printer set up and have tested it with the firewall switched off, but as soon as I restart the firewall, the printer is inaccessible.
I thought that all traffic on the internal network was allowed, but it seems that I need to create an explicit rule in order to get the shared printer working. Unfortunately, I haven't been able to figure out how to do that yet.
When I try to change some settings of my printer using HPLIP it tells me to add myself to the lp an sys group. Is that safe ? What are those groups used for ?
View 9 Replies View RelatedI have two 11.3 systems, one with my printers set up. Is there a basic method to export or transfer my printers' settings and drivers to the other system? Running Gnome on both.
View 1 Replies View RelatedI have about 5 users for our desktop computer, 1 adult, 3 kids and me (I don't count as an adult ).
There are some settings I want to have each of the environments default to, where they can then change them as they wish on their own.
Instead of setting them one-at-a-time, is there a way to modify the settings on the template of what goes into a user's /home directory when they are created?
Examples:
Set it so when I add a person to the system theirdefault browser is set to Firefox starting home page is to our local server Open/Libre Office defaults to MS Office formats And others, less important ones like their pictures are placed in a centralized directory, not their own ~/Pictures.
After this initial setting, they are able to change any and all of these settings on their own, but to have these as default helps me set up their environments to get them started.
Trouble with cups - Opensuse 11.3 x86-64
Hplip installed
prrinter = HP photosmart 4280
No way I can set the printer as default printer in cups as in 11.2. Now hp-device-manager. Part of hplip is complaining "set the default printer"
I'm using OpenSUSE as a guest OS in VMware. Display settings are 1400x1050@60Hz but I want to change them for 1440x900. Using root account I go to Configure Desktop -> Display -> 1440x900. The first problem is that I can't choose 60Hz, only "Auto" or "0.0". I click Apply and the resolution changes, but if I reboot the computer or just logoff... resolution goes back to 1400x1050. My card and monitor properties: [URL]. Another strange thing is that if I click Ok on the Card and Monitor properties (changing from one resolution to another), I can choose to "Test" it, and xfine2 appears but... it ALWAYS says "1400x1050". An screenshoot of xfine2: [URL].
View 2 Replies View Relatedwhere I could lok to resolve this conflict?The command-line: lpotions -p printer -lReports the saved values with an "*" and (for evample: PageSize=Letter, InputSlot=MPT) seem to be in effect. However, the desired page size has been set and subsequently reports in both the web-based CUPS and the YaST printer utilities, as A4
View 7 Replies View RelatedEverytime i login my screen resolution is 640x480_60 Then i in a terminal change resolution to 1680x1050
Code:
cvt 1680 1050
xrandr --newmode "1680x1050_60.00" 146.25 1680 1784 1960 2240 1050 1053 1059 1089 -hsync +vsync
xrandr --addmode VGA-0 "1680x1050_60.00"
xrandr -s "1680x1050_60.00"
How can i make these settings default everytime i login?
I just upgrade kde4 in fedora 12 and the right click option for "appearance settings" is gone!
View 1 Replies View RelatedDid you play too much with compiz and after-a-while you realize that certain functions are not working anymore?
Well, just follow the steps below:
Quote:
gconftool-2 --recursive-unset /apps/compiz
Then,
Quote:
Restart your PC / lappy
[URL]
I am looking for a way to make my setting available to all the users in the system in KDE4 (even to those users which I may create letter).
View 1 Replies View RelatedI wanted to know a way to transfer all my KDE4 settings to all users in the system. I have tried to copy the settings to /etc/skel but the only problem I am having is whenever any new user tries to access their home folder, they come to my home folder because link to home folder is "file:///home/<my user name>".
View 1 Replies View RelatedI am trying to switch to KDE4.4.5 on my main machine. I installed the KDE packages and also the german language file. Everything works fine except the language settings. When I try to start it crash and a KDE crash dialog opens that gives this "developer information":
Code:
Application: System Settings (systemsettings), signal: Segmentation fault
Traceback (most recent call last):
File "/usr/share/gdb/auto-load/usr/lib/libgobject-2.0.so.0.2200.5-gdb.py", line 9, in <module>
from gobject import register
[code].....
It works on my netbook. I run on both machines Slackware 13.1. The only difference I can think of is that KDE was pre-installed on my netbook and I just upgraded it. On my main machine I installed all packages except the packages of kde and kdei.
I installed openSUSE on one of my work system. The network port wasn't working when I was installing, but works fine now (checked in Windows). But for some reason, I am not able to configure the network. I used both Dynamic and Static IPs (both work fine in Windows) but still no go. I am using Yast Control Center for this purpose. I can't even ping the default gateway when I am using custom settings. When I use dynamic settings, it says Unreachable Network.
View 7 Replies View RelatedCurrently my partner is printing on my Epson Stylus Photo R265 from her XP system. I am attempting to convert her over to Lucid but every attempt so far to replicate the printer settings fails miserably.I had a look at Picasa which on first view appeared to give me exactly what I wanted being an A4 print without any border. However when I attempted to produce the final result it failed miserably, quality was wishy washy and displayed print lines across the paper.I raised the matter on the Picasa forum only to be informed that the method used by them is to forward the print to the printer. The responder assumed that it was via Cups and suggested that I look to the print settings in Ubuntu.
When I access the printer via the System settings all it gives me is connectivity details. Where should I be looking to access the settings where I can set the printing details. I am aiming to have the best photo quality on premium glossy paper and printing without borders.Is this possible to achieve ?? I have been round the houses with F-Spot, Photoprint, Shotwell etc etc. Please dont mention Gimp as it is well over my head. Surely there must be some way of setting print quality within Ubuntu. I feel that I am so near to my aim and would like to achieve it as even she who must be obeyed is getting cheesed off with windows.
I am using a Canon MP560 and every time I try to print something I have to go back into the printer settings and change the settings from "From Driver" to grayscale and it is really annoying. How to I set it so it stays like that?
View 1 Replies View RelatedI have recently installed Fedora 13 on my netbook. I wish to use my HP Officejet via the HPLIP utility. The problem with this is that when I have the firewall turned on, the printer is not recognised at all during setup. When the firewall is switched off, the printer is recognised. The printer in question is an HP Officejet 8500a which is connected via Ethernet cable to a wireless router. I would like to know if there are any network ports (that's used by HPLIP) that I could 'turn on' in the firewall that could let my computer recognise the printer.
[Code]....
I have a triboot windows suse 11.3 stable and suse 11.3 factory pc, I would like to share the browsers and email settings between the suse stable and factory, I succeed with thunderbird and firefox moving the /home/.thunderbird and /home/.mozilla in an ext3 shared partition and linking these in the respecive /homes, I found that there isn't a /home/.chromium folder, I found probably /usr/lib64/chromium could be the same as /home/.mozilla for firefox, but I don't know if is secure or can damage my system to move this in a ext3 partition and then link this to the respective /usr/lib64/chromium, /usr/lib64/chromium has root owner, root group, visible and modifiable for root and only visible for group and other.
View 5 Replies View RelatedI am unable to add my USB printer via the YaST2 Printer Configuration setup tool in openSUSE 11.3. The printer, a Dell Color Laser 1320c, was last used with openSUSE 11.2, and setup was entirely uneventful. No driver is provided by Dell, so I used the Fuji Xerox DocuPrint C525A Linux driver. The problem: To add a print queue in 11.3, a Connection must be specified (parallel, USB, network, etc). However, the configuration wizard fails to show the presence of the USB print device.
[Code]...
This printer was working just eight weeks ago under 11.2, and 11.3 is obviously able to detect its presence and identify it correctly. I feel certain the solution is simple, but I haven't found documentation that provides the answer.
Is there a way I can save system settings and have yast revert to a config file in case I ever need to reinstall the system again? I hate having to configure the firewall, runlevels, samba shares, samba workgroup, apparmor, and all the other junk after every install. It's not like I install often, but should suse 11.5 or 12 roll out, I'd like it to be a snappy upgrade.
View 6 Replies View RelatedI have access to a "virtual" Windows server terminal, which I can access through my Ubuntu Linux via tsclient or rdesktop. Additionally, there are printer shares on this network, which can be accessed from any Windows PC on the network (including the "virtual" terminals); lets say the address is [URL]. Now, I open \printshares.company.com in the "virtual" terminal in rdesktop (avoiding tsclient since it has a Bug #94743 in tsclient (Ubuntu): Terminal Server Client isn't able to copy to/from clipboard) - and I can see all printers fine.. However, when I'm on my Linux machine directly on the work network, I try and do something like:
$ ping printshares.company.com
PING printshares.company.com (192.168.0.200) 56(84) bytes of data.
^C64 bytes from 192.168.0.200: icmp_req=1 ttl=124 time=10.4 ms
[code].....
Is it possible to retrieve the - let's call them "connection settings" - from the Windows terminal session, so I could replicate them under Linux when running smbclient? the IT department running these Windows servers is quite irritated by people using Linux; and will offer no support to those kinds of "customers". Furthermore, if obtaining those settings requires some installation on the client session, since I don't have permissions to install anything on the Windows terminal session.
I messed with Ubuntu WAYYY too much. How do I restore the OS back to it's original settings?
View 5 Replies View RelatedI need the command for returning my ubuntu netbook remix (newest version) to default settings. The problem is that when I installed a theme, the next time I booted the OS the screen starts blinking and when I enter my admin password, no icons appear. My laptop is Dell 1525.
View 4 Replies View Related
