My system is a intel Pentium 4d 3.0 Mhz hyperthreading , ECS mobo RC410L800m , 4gb ram, 450 watt atx power supply, 1 TB seagate Barracuda lp hdd , xpx GeForce 9500 GT graffix card .fter choosing three options(F6) before trying ubuntu first it loads and functions sweet but it is when I restart after install that it all goes away and i have to put in the disc again
I have a small question for you my friends."HOW CAN STOP BOOT SCREE AND RESTART ,WHAT KEYS ARE NEED?"I want to say thisC starts and I want to stop in whatever one point to read the messsage ,especially when I see "failed".I have 2 points with failed I can't have enough time because it's going fast.Of course I read the boot messages from /var/log but they are too long and to be honest evan I used in "gedit" the option "find" to search of raws with "failed" I can find some ,but other not.That's I think when PC start and if I can stop/PAUSE the boot process using some key combination I note and after I cancel "PAUSE" and PC continue the booting process.
i got a new laptop today, i bought it just to use linux. i but the iso on my usb and it works fine on the pc, but when i try it on my new laptop i am getting 'boot error' and must restart and remove usb. iso: ubuntu-10.10-desktop-amd64.iso laptop: [URL]
I've been using ubuntu for a couple of years rather successfully on my dual-boot Vista/Ubuntu. It upgraded to 8.0(4?) LTS, 10.04LTS and I kept it there until this afternoon I followed the instructions on the ubuntu site to open up a terminal and update-manager --somearg to provide me with a nice little "Upgrade" button on the update manager. I clicked said button per the instructions, let it do it's downloading and whatever else it does. The last step of the installation is a system reboot. I let it do that, and then my grub menu comes up as more-or-less this:
If I select the top one, I get: Code: Starting up ... with a blinking cursor under the S for a LONG time (used the power switch after ~40 mins). I tried the second 2.6.32-32 option for recovery mode. It spit a bunch of gibberish to the screen for a couple seconds and then stopped, presumably doing the same thing, just with 100% more gibberish. I tried booting into Vista, that worked fine. Just to reiterate, I've not yet seen a 10 LTS login screen or desktop, and can't get one yet (just a "Starting up ...") Just to add, I did try searching, but since the only info I had to go on was 8 LTS to 10 LTS upgrade, and "Starting up ...", well those are just hard keywords to get any meaningful info.
I successfully installed 1.4 last night. ran perfectly. Asked me to install the NVidia graphics driver. Not problem, still worked fine. Had to reboot, no problem worked just fine. Shut the machine down and two hours later the machine starts, goes through Bios, says booting OS, then restarts. just stays in this loop.I also installed virtualbox, which opened fine when tested. I did not add a new OS.I re-inserted the usb drive i did the original install from and it the install program loaded fine.Is there a way to role back to the last known good configuration?
I have a new Dell 3500 laptop with a dualboot Windows 7 and Kubuntu 10.04. Directly after installing Kubuntu the pc was able to restart without problems. However having shutdown the pc once and restart again it fails to boot in Kubuntu.
No error messages are shown, nothing at all. What happens after selecting Kubuntu in OS's, for a couple of seconds a bar ("-") flashes upper left corner of the screen. After that the screen goes entirely black (as if it were shut off).
how to dual boot XP, Win7 and F13? I ask this because I tried it a few weeks ago and I couldn't boot into XP. I installed XP, Win7 and Fedora in that order and when I tried to boot into XP from grub I got the message Code: Boot Mgr not found. Press Cntrl-Alt-Del to restart
I have a three monitor set-up under 9.10, the monitors are connected to a pair of nvida 512MB GT240s, two on one, one on the other. After booting, I get the logon screen but only two of my monitors have a picture; to get the third running I need to login and restart gdm within a terminal and then login again. I'm using the proprietary nvidia 185.18.36 drivers (which oddly report my cards as 1024MB GT230s), with Xinerama. My xorg is included below.
Whenever I start my PC, the information of 'First Boot device' in BIOS changes from hard disk to CD-Rom. It happens with new start, I mean, if I restart my computer after resetting First boot device to hard disk, then priority does not change. Just as I switch on computer, a black screen appears with the message: CMOS - checksum error - defaults loaded press F1 to continue, DEL to enter setup
Recently it used to happen, that PC was not reading my hard disk containing GRUB. I have 2 hard disks. I switched the power cables of two hard disks. After that, both hard disks were shown by BIOS but the above mentioned error started appearing. Also grub takes too much time to load. It takes almost 20 seconds. Earlier I was using 'Puppy Linux'. In that, Grub was loading in fraction of second.
I installed Lucid Beta a few days ago and was happy with the way everything worked. The system wanted an update on Thursday night, I installed it and then carried on using it for about an hour, it was then shutdown normally with no errors. On Friday morning it would not boot. I pressed the "on" button it came on, all the other lamps lit ie Caps and Num Lock, the battery light is on anyway, but the hard drive light is not flashing, it's as though it isn't being accessed, but I can hear it? There is no display on the screen. I'm running an Acer Aspire One. My initial thoughts are bios related, but I can't see how that would have changed, then I think maybe the Harddrive is knackered.
I had Ubuntu 10.04 on my 500GB Samsung drive. Today it suddenly stopped responding, not only X11 but the whole system (Ctrl + alt + f1 didn't worked either) so I had to force restart it. Since then, I can't boot it again - right after memory test and general motherboard splash, the white line cursor goes about 3 lines down of topline and stops there. After about 5 minutes there's still no GRUB menu. Finally I had reinstalled the system (which is not really much pain since my "home" was on other partition than the system, but it didn't helped - still the same. On the other hand, booting USB Live works perfectly fine (I'm using it right now). I have an access to all the partitions, all the data seems to be there, SMART utility says the hdd is healthy ..
Oh, and I tried reinstalling with grub-reinstall before, it said that the reinstallation went fine but didn't helped either
First off, i have ran 10.10 for the past 6 months without any problems. Then last week i decided to try 11.04. I installed using Wubi. Now the problem is the computer only freezes when I am using a web browser (firefox). it completely freezes where I can do nothing, so I will kill it with the power button. When i try to restart, not even the bios will boot up, just a blank screen with the num/caps lock key flashing.
But after trying to restart several times the bios and boot loader will eventually come up and will start up normally until the same thing happens. I decided to reinstall using wubi so when i tried to boot itno windows, the windows partition was corrupted. I fully restored windows and installed 11.04 with wubi again only to have the same freezing problems.
I will be trying 10.10 again and see if it just a 11.04 issue, but thought this problem should be out there if anyone else has a similar experience
I have downloaded linux mint using a USB followed all instructions and removed the USB stick as requested but it failed to boot on restart. it boots ok with the stick connected. i have changed it to boot from the hard drive and still no joy. i can access the terminal when the stick is on and all i need are the instructions to enable it to boot without the usb stick.
Samsung N210 10.1 inch notebook 1GB Ram 250 HDD
Came with windows 7 and i selected to use the whole disk when i installed Debian on it, the same when i installed mint and removed debian.
I had recently installed the kernel sources so that I could compile the VirtualBox kernel module to use well but I had not restarted afterwards. I had been using my system problem free until tonight when I decided to restart. I had no internet connection and through ifconfig showing only lo and ifup eth0 returning "device eth0 is not accessible", I discovered I had a bigger problem than at first thought. Then I discovered that no PCI devices other than video were working, and so I referred to /var/log/messages and discoverd a line stating that "/lib/modules/2.6.37.6-0.5-desktop/modules.dep : no such file or directory.
All other entries in that directory were some version of 2.6.37.1-1.2.
Unfortunately I had to end up reinstalling because witho
The system worked fine for me until one fine day, when I boot up I get this message: BOOTMGR is missing Press Ctrl + Alt + Del to restart
I checked the BIOS to make sure it ran the correct drive first but no go. I tried reinstall ubuntu but it doesnt seem to work. I dont have windows running on this machine.
I have a Dell desk top PC, running WinXP and Ubuntu 10.04 LTS with a Ge-Force FX 5200 video card. In trying to get both monitors to work properly I thought it would help to reinstall Nvidia binary X.Org driver V173. After I removed the driver I tried to restart the computer with Umbuntu, it hangs up at the Ubuntu logo. I can boot with the live disk, I also tried to reinstall the Nvidia driver But the machine still will not boot from the hard drive, it will boot into Win XP normally.hould I just reinstall Ubuntu or fix the problem I created? My skills working in Terminal are minimal
I installed 10.04, and now i cant get back to windows. I have Ubuntu on one hard drive and windows on the other one. When i try to boot up, unless i go to the boot menu and select the hard drive with Ubuntu on it i get the message boot-mgr is missing, press Ctr - Alt - Del to restart.
I have just finished the upgrade of the latest version and I'm at the point of my system restating.
My system automatically tried to restart but on the restart I got the 'terminal' view. It stopped when asking for my username (it never normally asks for this before the grub menu) and then password. I didn't get any further than that.
I now have on my screen (still in the terminal view before the grub menu)
"name@name-desktop:...$ "
I'm on my phone now so I don't actually have the symbol for before the dollar sign but your know what it is. The raised S on a 90 degree angle.
I downloaded the 7 Cds .iso and I proceed to make a copy in a cds. I change the boot in my PC and restart the PC to read the cds. But the program instalation not running. What I need to do?
This morning I attempted to 'clean' up some old files/programs from my dual mounted (Vista/10.04) laptop. All seemed ok until I tried to run Vista and I got the following: /windows/system32/winload.exe status Oxc000000F missing or corrupt
I then tried to reboot into Ubuntu but it keeps trying to load windows. It looks like I have somehow lost my grub, so now I have lost Ubuntu and Vista. I tried my Vista Start Up disk and at the command prompt I entered: Bootrec.ext /fixboot Bootrec.exe /fixmbr on restart it went back to the 'missing or corrupt' information. Is there some way I get get back to normal?
I've tried to install 11.04 on my Macbook Pro (5,4) today. I had two drives in the machine, an SSD as my main drive, and an HD. I installed rEFIt before attempting to install Ubuntu. I moved my Snow Leopard install to the secondary HD & made sure I could boot to it. Then, I used the live CD & gparted to clear the 1st drive (the SSD), create the swap space, create the Ubuntu partition, and launch the install, where I used what I had just created on the SSD. The install completed okay (but with no option to select where the GRUB installer went, like some tutorials tell you to look out for). This seemed to go okay, so I went to restart at the end of the install, but the machine didn't come back up.
Instead, the power came on & I could hear the drives, but the screen stayed black, the battery light flashed a load of times really quickly (too quickly to count, but at least 10 times), and then the machine let out 1 long beep and stayed on the black screen. I forced it to power down & tried again, and just got a black screen, the battery light shining steadily, and no beep. I forced it to power down again, and got the same, then again, and got the same, and then a 4th time, which actually allowed me to boot. And this has been the pattern since then. I shut down, and my first attempt to restart gets me the flashing light and the beep, with the black screen. I try 3 more times to power down and restart, and just get the black screen. Then, *every* time on the 4th time, I'm allowed to boot.
The same routine will be gone through the next time I power down and try to restart. I've tried totally clearing the disk in gparted, restoring the OSX install from TimeMachine, everything I could think of, but all to no avail. Finally, thinking that maybe the OSX install I had safe on the secondary HD might still be okay (looking at it in gparted showed an EFI boot section & everything), I opened up my MBP, swapped the drives around so that the HD is now the main drive, and the SSD the secondary, and renamed the drives so that the primary HD is now called 'Macintosh HD' and is first in the list of drives that appear when I manage to boot each 4th attempt. But, to my great disappointment, I still got exactly the same error. Can anyone offer any advice on how to:
1) Get my machine booting to a safe Snow Leopard install on the (now primary) HD? 2) Safely install Ubuntu on the (now secondary) SSD?
Obviously the first is a top priority, as I need my machine in order to work! Then I can concentrate on moving my dev environment to Ubuntu, which I've been dying to do for ages.
I wanted to put 11.04 on my wife's Win 7 Toshiba laptop so thought I would live boot and see everything worked first. Well it does seem to but I didn't have time to install it then so just shut down. Well on restarting without CD in it failed to boot windows and had to let the recovery process fix it. Now I want to set it up for dual boot at least to start with so until I can get some answers I don't want to risk it. Is there some problem with win 7? Will I be able to shrink the Win7 partition to put ubuntu on? Will Win 7 have an error each time she boots it after 11.04 is installed and run?
I have a suspend problem in my laptop. Sometimes, when resuming from suspend, the network adapter is down (that is, the network does not work and the light of the network adapter is off). Restarting the network service doesn't work, because I think that the system forgot about the hardware, and probably the driver should be reloaded.Does anyone knows how to do that?(ps. /etc/init.d/networking restart does not work, because the hardware driver is not being recognized anymore).
I'm currently running Fedora 13, after I updated the kernel to 2.6.34, I have to run (as a superuser) "service NetworkManager start" in order to start my network manager, is there are way I can run this on startup?
Also my ethernet connection seems to only work when I restart/boot up my computer, when I wake my computer up from being asleep, the ethernet stops working.
I've had Windows XP Home installed on my netbook (Toshiba NB205) and I've just tried to install squeeze via net install. In particular, I installed grub. Everything seemed to go ok during the installation, but when I boot up, all that appears is a blank screen with nothing but at "j" and a cursor. One thing I can think of that might offer a clue, is that when asked to installed grub, the installer said it recognized two operating systems: Microsoft Windows XP Home, and Windows NT/XP. The latter is not really an operating system, but the backup partition.
I don't know how this might affect grub's functioning. What does this "j" mean? Looking at this: [URL]. Could this have some thing to do with boot flag? Should I switch it to my NTFS partition instead of my root partition? Doing that at least let's me boot into Windows. But that's not what I want. I've never dual booted before. So I booted back up with my USB, intending to reinstall Debian, and it loaded grub instead. So apparently grub is now on my USB. Then it booted me into Debian.
i have installed dhcp,there i declared the subnet and network,i used command include "/etc/dhcpd.conf.jutu1"; to start and other files, but it show me this error when i want to restart the DHCP, if you need more information contact me, i have configured this file too jutu1, but it don't let me to restart dhcp from /etc/init.d/dhcpd restart, this show me this message
Today I installed ubuntu on my second hard drive with the default settings. When it went to do a system restart, it asked me to remove the CD from the drive. I did so and hit enter, and since then it has been stuck on a screen that claims it is restarting:[3766.525721] Restarting System..