Ubuntu :: 10.04 GRUB Doesn't Boot After Sudden Restart?
Sep 14, 2010
I had Ubuntu 10.04 on my 500GB Samsung drive. Today it suddenly stopped responding, not only X11 but the whole system (Ctrl + alt + f1 didn't worked either) so I had to force restart it. Since then, I can't boot it again - right after memory test and general motherboard splash, the white line cursor goes about 3 lines down of topline and stops there. After about 5 minutes there's still no GRUB menu. Finally I had reinstalled the system (which is not really much pain since my "home" was on other partition than the system, but it didn't helped - still the same. On the other hand, booting USB Live works perfectly fine (I'm using it right now). I have an access to all the partitions, all the data seems to be there, SMART utility says the hdd is healthy ..
Oh, and I tried reinstalling with grub-reinstall before, it said that the reinstallation went fine but didn't helped either
View 8 Replies
ADVERTISEMENT
Jul 23, 2010
[code]...
this is my AGP card. My problem is while using ubuntu.. i experience sudden black screen and when the black screen appears it appears for forever until i restart the my computer, it happens suddenly and many times and im having this problem in ubuntu only never experienced in windows.. as i kicked of windows and using ubuntu so i am having this problem regularly. I am using Ubuntu 10.04 Lucid. Ram 512. And i am 10 days Old in ubuntu
View 2 Replies
View Related
Jan 4, 2011
Ubuntu 10.10 doesn't boot at all. The liveCD only boots once every like 30 attempts, installing from liveCD froze, but the Alternate CD worked and installed ubuntu. Now when I try to boot into it using GRUB, it freezes at the beginning of the boot process.With normal boot it freezes at line: Starting AppArmor profiles Skipping profile in /etc/apparmor.d/disable: usr.bin.firefox.With recovery mode it freezes even before showing me anything
A little kinda like the liveCD, if I try like 30 times, it might manage to boot once in normal mode.That line keeps on repeating, the the xxx.xxx integer changes each time, and this goes on forever.I tried removing my floppy drive, but it didn't help.I tried to boot with fd0=noprobeThe one time it booted, when I restarted, it froze while trying to restart.
View 9 Replies
View Related
Mar 21, 2011
I have used CentOS for a while and have never run into this issue. I searched all over and didn't see a similar issue anywhere, I did an install of CentOS as a server (no GUI) with only the base. Partition is /boot ext3, size of 100MB. The rest of the drive is partitioned as / with ext3. This is being done on a CompactFlash card of 32GB in size. The BIOS sees it as an IDE drive.
When the install completes and the system reboots, the grub stops at the grub> prompt. There is no menu for OS options. If I do the following commands:
grub>root (hd0,0)
grub>kernel /vmlinuz-2.6.18-194.el5 root=LABEL=/
grub>initrd /initrd-2.6.18-194.el5.img
grub>boot
View 19 Replies
View Related
May 13, 2010
I want to use my QTCurve theme for GTK apps. This has worked great for several months on opensuse 11.2, and suddenly it broke. I do not know what made it broke, purhaps some kind of system update...The gtk-Qtcurve engines are installed (both 32 and 64 bit). I tried linking the gtkrc file from /usr/share/themes/QtCurve/gtk-2.0 towards /etc/gtk-2.0 but that didn't help either. I can change the GTK themes to whatever theme, except to QTCurve...
View 7 Replies
View Related
Nov 23, 2010
I have tried hours of followed fixes for my situation to no avail.I am stuck in grub line command and cannot get out.I have tried everything under the sun and nothing. every command comes back with disk read error, unrecognized command, etc.I am about ready to throw the mini 9 through the wall.
View 4 Replies
View Related
Apr 5, 2010
Whenever I choose "Restart" from the GDM screen, GDM appears to shutdown, and the first TTY is displayed with a login prompt at the bottom (assuming I haven't used that TTY). I am by no estimation a patient individual, but I waited a solid minute or two for something to happen, but nothing ever did. I end up logging in as root on that TTY and running "shutdown -r now" to get the job done. This is a shared computer, and ideally any user should be able to perform shutdown options graphically from GDM.The only mentioned workaround doesn't apply to me as I am using the nvidia driver, not intel.
View 1 Replies
View Related
Jun 27, 2011
Computer: Toshiba Satellite Pro L510 laptop, 10.10.This has always happened but I have gotten around it by time-out and putting my menu.list in order. When I first boot the machine (switch on for the day from computer being off) I get to the grub options to select a kernel and I have no keyboard. No up/down arrows so have to go with the kernel on top of the list (not always desirable).
When I get to the log-in screen if I hit restart and go back to the grub screen I have a keyboard and can select any kernel. If I login to the kernel I have full keyboard, no problem. If I then restart, I have keyboard at the grub list.
Nutshell: It is only when starting the computer fresh that the keyboard is dead at grub menu (and then only). Any time after that, once the computer has been switched on, if I restart I have keyboard at grub menu and can select different kernels. (Of course, if I switch the computer off and back on again, no keyboard ...)
View 6 Replies
View Related
Feb 26, 2010
I loaded Kubuntu 9.1 and got a mess in the Grub 2 Boot Menu, which I can't correct.
I get extra choices in the Boot menu, and the first few, which are supposedly for Kubuntu Karmic Koala all put me in a shell, which ends in a black screen, then shows up a shell once I hit "enter". Then I just have a "intramfs" (?) prompt.
So I went into Grub2 to change it, and it refuses to do it. All I get is a screen full of error messages every time I try, with no change. Apparently it is looking to access drive sdb8, which is non-existent. I DO have a drive sda8, though.
So with all the wonderfulness of the indirect system to change Grub 2 how am I supposed to set it right? The old Grub worked fine, and just took simple changes to the menu.lst file.
Can't somebody write a program that lets Grub 2 be changed from within the program, rather than all this running around trying to find what file to change, and how to get the change to work?
Just to be clear, here are the errors as they show up when grub-update is flailing around:
"error: cannot open '/dev/sdb' while attempting to get disk size
error: cannot open '/dev/sdb' while attempting to get disk size
Generating grub.cfg
error: cannot open '/dev/sdb' while attempting to get disk size
[Code].....
View 9 Replies
View Related
Aug 9, 2010
I want to change my default boot to Vista.I follow https://help.ubuntu.com/community/Gr...hangeDefaultOS
I try
Code:
gksudo gedit /boot/grub/menu.lst
[code]...
View 8 Replies
View Related
Nov 3, 2010
I have Win7 installed in my notebook, after I install WinXP, after I install Ubuntu 10.10
I need WinXP to my project...
I re-install Grub2 with live CD and the WinXP doesn't show up...
So I re-install WinXP... Re-install Grub2 and WinXP doesn't show up again...
So I custumise Grub2 and I put one line for WinXP (doesn't work)
But Now, Win7 line in Grub2 boot WinXP
Code:
Boot Info Script 0.55 dated February 15th, 2010
============================= Boot Info Summary: ==============================
=> Grub 2 is installed in the MBR of /dev/sda and looks on the same drive in partition #6 for (,msdos6)/boot/grub.
[Code].....
View 5 Replies
View Related
Jul 28, 2011
I just added a 3rd hard drive, but now when I boot my computer grub doesn't load at all, it just boots to Windows. I've tried holding down Shift, and I've tried holding down ESC but it didn't work. I believe I have grub2.
View 2 Replies
View Related
Jul 17, 2010
Since upgrading to Lucid (I think), I can't boot into Windows. When I select the Windows Vista entry in GRUB, the screen goes blank for a moment before returning me to the GRUB menu.I have tried pressing 'e' to edit the GRUB entry before booting, and what I find is that it says the root is hd0,1Since my Windows partition is sda1 in GPartEd, should that translate to, for example hd0,0 ?The only reason I want to boot into Windows in the first place is to install a BIOS upgrade from HP, which only works with their Windows software. If someone can suggest an alternative way of doing this then I won't need to boot into Windows at all.
View 9 Replies
View Related
Apr 10, 2011
got myself a new pc, windows 7 installed.. i just got done installing ubuntu10.10. it said to finnish, i had to reboot.. ok, no problem.. i reboot, loading says uuid is not valid.. but, it loads 7 fine.. they are on the same drive, but different partitions. i only got a wireless usb keyboard and when it goes to the shell, it doesnt seen to recognize it.
View 9 Replies
View Related
Feb 6, 2010
I tried to install Ubuntu on an external drive, but it doesn't boot, but it installed GRUB on my main HD, and now I can't even boot Windows. I only get a "grub rescue" prompt. I need to remove GRUB. How to do it?
View 6 Replies
View Related
Jan 1, 2010
My Wubi installation of Ubuntu (version 9.10, I think) that I recently installed was working fine at one point, but now it isn['t. I select Ubuntu instead of Windows from the Windows boot loader, but instead of getting the usual menu of different linux versions (I think 2, as I updated it at same point), and Windows, I get the GRUB command prompt instead.I've looked at th2e Wubi Guide (https://wiki.ubuntu.com/WubiGuide), and I've followed the instructions for "How can I access my Wubi install and repair my install if it won't boot?", but that reveals no problems.For the record, I'm fairly new to linux and ubuntu, but I'm good with computers generally. The main operating system on my computer is Windows Vista, but I'm currently typing this from a Live CD of Ubuntu 9.10. The virtual disk (root.disk), is currently mounted as vdisk, as indicated in the Wubi Guide.
Ideally I would like to get Ubuntu to load as it used to (with a menu). However, if there is a way to boot from the GRUB command line that would be good too. I'm not at all familiar with GRUB, and the commands I've tried (boot and linux, I think), get errors saying no kernel specified, or loaded, or something like that.
View 2 Replies
View Related
Feb 18, 2012
My system doesn't boot anymore, when I turn on the laptop, instead of the normal grub screen, i get the following:
"error: file not found
Entering rescue mode...
grub rescue> _"
I tried also to make a bootable usb w/ unetbootin but all the distros failed to load w/ a syslinux boot error message so I really need to fix the existing debian installation to get access to my files i need for the university, it's debian stable (6.0.4) on hp mini 210 ....
View 12 Replies
View Related
Jan 20, 2009
I am trying to boot kubutu from FC10's grub. FC10 is in MBR, installed kubuntu without grub. Is that a problem for me now? I mean, should I need to install kubutu grub in order to boot from FC10 grub? I tried with these methods but nothing works:
title Kubuntu 8.10 Linux
chainloader +1
title Kubuntu 8.10 Linux
[code]....
View 4 Replies
View Related
Jan 30, 2011
I have windows7 installed in my laptop. I tried installing Redhat linux in it, and I was successful. But then I logged in with windows7 and deleted the partition in which I had installed redhat through computer management. Now my system doesnt boot with windows instead it boots with GRUB. Also to inform that the deleted linux partition I merged with Windows.
View 2 Replies
View Related
Dec 18, 2010
I have freshly installed Xubuntu on my HP compaq nx9010 laptop and grub doesn't boot system. Only minimal BASH-like line scripting is supported. How can I fix it?
View 9 Replies
View Related
Jun 7, 2010
I have an HP Pavilion m7480n PC with Windows XP installed on the C-drive. I successfully installed FC 12 onto the spare USB drive. When I rebooted the PC all I got was a blinking underscore at the extreme upper left position of a totally black screen. After a bit of experimenting I found that if I hit the F1 key during the boot process, go into the BIOS setup, do nothing within the setup, and press ESC to get out of the setup then the PC will go back into the boot cycle a second time. During the second time however a small text message appears with words to the effect "Press any key to enter GRUB..." after which the GRUB splash screen comes up with the choice for FC 12 or "Other" (referring to Win XP). At that point I can boot into either one.
View 4 Replies
View Related
Oct 13, 2010
I've just installed Fedora (F13) for the first time, on a new HDD, to give myself a dual-boot system. So currently I have:
So, at the appropriate stage in the install menu, there is an option for where to install GRUB, and a drop-down to choose which drive is the primary BIOS boot drive.
However, in both cases, no other drive except my new sdc is visible. So, I can install GRUB to MBR of sdc, or to first sector of boot partition - but no option to put it to my primary boot drive MBR on sda.
Likewise, in the GRUB configuration page, if I go to Add another OS, the only option it gives me is my new Fedora install. It doesn't list the Vista OS on sda at all.
The result is that I can boot to either OS by changing the boot drive priority in BIOS.
I guess my question is this:
- is this expected behaviour from the installer, meaning that I'll need to configure GRUB manually somehow? (gulp ) or
- did I do something wrong in the install process? or
- is this some weird bug manifesting itself?
View 12 Replies
View Related
Sep 1, 2011
i have ubuntu 10 and win 7 dual booting on one hdd, all of a sudden grub says error no such partition when i select windows at the boot menu. and i cant get to the win7 partition from ubuntu (to play music and stuff, this used to work, places, mount filesystem, 250 gigs whatever). i've tried the stuff in these links and nothing has worked so farpartition info
sudo fdisk -l /dev/sda
Device Boot Start End Blocks Id System
/dev/sda1 1 29094 233697523+ 7 HPFS/NTFS
/dev/sda2 * 29095 30401 10498477+ 83 Linux
View 8 Replies
View Related
Feb 19, 2010
I'm in 9.10, I had KDE 4.3 now with SC 4.4, and it doesn't reboot or shut down from any graphical way I can access. Power management works otherwise, and I can shut down from the command line.
View 6 Replies
View Related
May 5, 2010
In Ubuntu 10.4 the restart option behaves like log off. It doesn't restart my computer just takes me to a log in screen.
View 2 Replies
View Related
May 25, 2010
I have a huge problem I can't move with. I bought an Asus N61JV laptop and put Ubuntu on it. There was a proprietry software (graphic card booster from nvidia) that asked me to restart the laptop afterwards. I did so, however, the laptop won't boot at all not. It doesn't respond to anyhing, I only hear it working. All I can do is turn it on and off. I'm getting desperate, I've had it for like 2 hours! Please help me, I'm almost crying. I'm not an experienced UNIX user and I totally don't know what to do. It boots until the point where I see Ubuntu writen and then the display like turns off. I can't even put windows there, it dosn't react to f9 or anyhing.
View 4 Replies
View Related
Apr 18, 2011
i kept ubuntu cd into my laptop and then i restart my lap but it doesnt show anything ,again it shows my windows xp,i need to install ubuntu and i dont want delete xp,
View 1 Replies
View Related
Mar 13, 2011
Just attempted to upgrade from 10.04 to 10.10, after having updated everything. Upon completion of the upgrade I was asked to restart, however, when I restarted the PC I was presented with the following:
GNU GRUB version 1.98+20100804-5ubuntu3
Minimal BASH-like line editing is supported. For the first word, TAB lists possible command completions. Anywhere else TAB lists possible device or file completions.
View 2 Replies
View Related
Dec 11, 2010
I'm having a strange behaviour with GRUB, and I don't know much about it. The problem is that GRUB is looking at the wrong place when it starts. I have a /boot partition (/dev/sda1) with everything for booting and grub. This gets updated when I update, say, the kernel, grub, etc. But I also have a /backups partition (/dev/sda4) with a directory /backups/boot/grub that is a copy of /boot/grub. The /backups/boot directory only has the /backups/boot/grub directory, not the kernels, etc.
If I delete the /backups/boot/grub directory, I get a "grub>" console at startup, and system doesn't boot. SO: Why is grub looking at /backups/boot/grub instead of /boot/grub and how can I fix this? This is my grub.conf, identical in both directories, and both pointing to /boot=/dev/sda1=(hd0,0):
[Code]...
View 3 Replies
View Related
Nov 29, 2010
i am trying to change the boot order on the GRUB menu so that the countdown automatically starts on an older kernel. From what i can see all the solutions on the web want me to edit the /boot/grub/menu.lst file. The problem is that i don't have one. Someone also mentioned that if i don't have a menu.lst file then i should look for the grub.conf file. I don't have on of those either. The closest thing in /boot/grub is grub.cfg but that looks nothing like the descriptions i have heard of /boot/grub/menu.lst file
View 5 Replies
View Related
