I have Sony Vaio nw23 ne laptop. This came with window 7 home basic 64 bit, so my question is that can I install Ubuntu over window 7 in a separate partitions
View 2 Replieshow to do a fresh install of Ubuntu and Windows on two separate partitions? When I install windows and leave a partition for linux, the "Side by side" setup isn't what I'm looking for. Manually doing it made me a little uneasy.
View 5 Replies View RelatedOn my triple-boot PC:
Code:
SuLinux:~ # fdisk -l
Disk /dev/sda: 250.1 GB, 250059350016 bytes
255 heads, 63 sectors/track, 30401 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
[Code]....
Will the above procedure accomplish this objective, without crippling openSUSE ? The second swap partition has never shown any activity (on SUSE). I understand (from Using shared swap files) that a single swap partition may be shared. Since these areas are relatively small, It is not inconvenient to maintain separate swap partitions.
im trying to install ubuntu 11.4 onto an xp laptop with 3 partitions, c, d, e and i would like the 11.4 on the d partition but i get to the point where it says the partitioning thing but cant figure how to place it in the (d) ,
View 4 Replies View RelatedI want to create a separate partition for /home.inuxMint is *already* installed.PartedMagic be used for the same, NOW
View 14 Replies View RelatedI have a netbook with limited storage. 8GB internal and a 16GB SD card. Right now I have Ubuntu installed on the 8GB internal storage with a few directories mounted on the 16GB SD card. (/usr and /usr/local). This has worked out fairly well for me as having the entire installation on just the 8GB drive was too limiting. When I tried this I didn't know how big to make the partitions I was mounting in. These partitions are 7.06GB for the root (on internal storage) 2.8GB for /usr/local and another 2.8GB for /usr (both 2.8GB partitions are on the 16GB SD with the extra space being media storage for me). It seems I didn't make these partitions big enough because I can no longer perform updates. I'd like to redo all of this from scratch. how would you recommend I partition this next time around? Do I need individual partitions for the separate mount points that aren't root? Are those the directories I should be mounting on the SD card?
View 1 Replies View RelatedI am trying to install Fedora 12 on my laptop. But every time it loads the screen rez is way off and I cant see the bottom of any window. And its in 4 wierd sections. I have trying usb and cd on both Ub. and Fe. My laptop is an HP DV6629wn NVIDIA GeForce 7150M / nForce 630M
View 1 Replies View RelatedI am running ubuntu 9.10, on a Lenovo laptop. Has been working perfectly until now. But now my screen is split into 6 very small screens which all work in synch. That is - I have 6 mouse pointers - it is really like having 6 very small screens. All software is still working. However - I need to go back to only one screen in full-size. Has anyone ever experienced this. Using Nvidia accelerated graphics driver.
View 4 Replies View RelatedI have PC with following specs:
Intel E7500 CPU / Intel G31 Motherboard
Kingston 800MHz 2GB RAM
Hitachi 500 GB SATA HDD + Seagate 160 GB SATA HDD
I initially had only 500 GB HDD. I installed two installations of Windows 7 Ultimate - one 32-bit and one 64-bit installations. Both working fine.
Later on I installed the 160 GB HDD and installed Fedora 13 in it in a partition. The rest space of the 160GB I am using with Windows for storing data.
Now, the boot entries of both Windows installations are in the Grub Loader of F13. Means, if I remove the 160GB HDD, I cannot boot into my Windows installations.
Now I want to remove the 160 GB HDD and install a new 2TB hard-drive. That way, I cannot log into my Windows. And I do not want to lose the Linux installation also.
How can I remove the 160 GB HDD and install a new one without sacrificing my Windows installations?
OR...Is it possible that I can copy complete image of F13 on to the new HDD, so that things are same for the Windows installations?
I have just installed F11 and want to change Nautilus to default Ubuntu and not open each folder in separate window. But I can't go to Edit/Preferences.Nautilus keeps crashing and I get this report:Quote:
Distribution: Fedora release 11 (Leonidas)
Gnome Release: 2.26.3 2009-07-07 (Red Hat, Inc)
BugBuddy Version: 2.26.0
[code]....
I have a msi cr610 laptop. I installed fedora 13 and tried to access internet but fails. I have wireless internet in my apartment (WAP& WEP). Can I buy a separate usb wireless adapter and plug in. Will it work? Will fedora detect wireless points?
View 3 Replies View RelatedI was yesterday evening experimenting inserting a script into /boot/grub/grub.cfg. Well I broke grub.cfg and had to try to boot from a grub2 prompt.I have separate /boot and / partitions on /dev/sda1 and /dev/sda2 respectively.Working out the correct syntax for the boot to work was a little complicated, so I thought it would be useful to post the correct procedure here, in case anyone else has the same set up that I do (separate /boot and / partitions)At the grub prompt code:
grub> set prefix=(hd0,1)/grub
grub> insmod linux
grub> set root=(hd0,2)
[code].....
I have downloaded new version 10.4 of Ubuntu and burn it on CD with power iso, gave it a try to install but after it started from cd and waited to load an error pop up and says it can not install from cd ...then i tried to start live cd and it started Ok with no problem. In live cd mode i tried install again and started well ,1to4 step ok, then at 4 step when it comes to HDD and partitions the window to choose from is blank. No HDD no partitions. but interesting is that in this Os it has partitioning tool in system tools GParted, and whit it i can see my HDD and partitions, even tried format with it a partition for Ubuntu then tried install but problem is the same = blank step 4,.. so on my pc i can not install 10.4
Pc ( Amd 2800+, Mbo ASRock K7Upgrade-600, vga ati 9600pro, rest integrated, hdd maxtor 160gb (Maxtor 6L160M0) I have older version of ubuntu = 8.10 and everything is ok and istall is ok , hdd is visible,installed and works I tried install 10.4 on my friends Pc which has Intel mbo, intel cpu, ati 1550, sound+lan integrated on mbo, 2 hdd on sata 1 on Ata, on his pc i had no problems with install, runs good, sound ok, DSL ok over lan, update ok,..
I have vista and opensuse 11.2 on my computer, the problem is i can't open ext3 partitions from vista but i can the other way. I tried Ext2fsd but the linux partition is always in a read only mood even when i change this option. Also, all folders are empty I downloaded the program as admin and compatable with XP SP2.
View 3 Replies View RelatedI recently got a new laptop and I'm trying to figure out how to divide up its partitions. I was thinking that I would install Ubuntu on a relatively small partition and store all of my files on the NTFS parition, linking them back to Ubuntu.
What's a comfortable size for an Ubuntu parition?
Also, I've tested 64-bit Ubuntu and it doesn't seem to have any major problems. Though I might upgrade, I only have 4 GB of ram right now. Should I install 64- or 32- bit?
Can't I forward a program window from my laptop to my desktop securely, both running Linux?How to ssh -X an existing window program just like the 'screen' program does?This question came up with my friends when watching an episode of 24! "Almeida send me your screen"
View 1 Replies View RelatedI have a troubling issue. I log into Linux Mint 9 (fully up-to-date) on my Samsung Q320 laptop with power connected and after a few minutes it seems like the entire X session dies, I am logged out, all processes are killed and I am presented with the normal GDM login screen. When I first installed Linux Mint, this never happened. I have the NVidia closed-source driver installed and when the system logs me out, it immediately restarts X loading the NVidia driver which flashes the logo on screen. This all happens instantaneously, so it is not a reboot of the machine, just a restart of the display manager it seems.
There does not seem to be any cause for this. I have disabled all screen saver and power management settings that may lead my system to auto-logout of Gnome. The system log doesn't indicate anything unusual happening. Confused about where to to take it from here bar and fresh install of the OS. Perhaps there are some X11 logs I should be checking.
Update: Moved to Ubuntu 10.10 and its recommended NVidia driver and have not experienced this problem since.
I have a toshiba portege m200 without a cd drive or usb boot ( its a pain ) and was wondering if its possible to use my desktop to install ubuntu ( i can connect the laptops hard drive via usb)
View 3 Replies View RelatedI recently put ubuntu on my laptop in hope that most of my games would run through wine, some did and some didn't.
Anyway, long story short, I have ubuntu on my laptop and I want to re install windows onto a separate partition, keeping my ubuntu instillation in tact and set as my deafault OS.
I'm very new to ubuntu and the only guides i've seen are fairly complex. I was just wondering if anyone could point me in the right direction? p.s. Is there maybe a way to create an image of my current ubuntu nstillation/settings/apps etc. just in case I do something wrong and lose everything?
im gonna do a fresh install of ubuntu 10.04 and want to make a separate partition for the home folder.
View 3 Replies View RelatedThe hardware is a psystar box with 2 drives for os x and ubuntu respectively. I attempted install of ubuntu over older version of xubunut without physically disconnecting the os x drive After install I could not boot into either system. THEN I remembered something about the install problem that 10.4 has and installed ubuntu again, this time following the instruction regarding booloader install. Now I can boot ubunut fine, but of course when I select drive holing os x it hangs on 'Verifying DMI pool data....' I've been looking at some thread on here about dual boot problems with Win7 and such, but are any of the recommended diagnostic and repair steps relevant to my case, specifically testdisk and bootinfo scripts?
View 1 Replies View RelatedI've read several accounts of users who upgraded Ubuntu versions and ran into problems. I read that putting /home on a separate partition can make it easier to do upgrades. But it seems to me application versions and even the default applications themselves change so much between Ubuntu releases that I question whether it's a good idea to have all the "OLD" config files and settings that get stored in /home sitting around when running a new Ubuntu release.Does anyone think it's a better idea to just put the whole Ubuntu install (i.e., / and /home) on the same partition? And then when upgrading, backup, and then just fresh install everything (to get the cleanest possible installation)?
View 9 Replies View RelatedDoes the fedora 11 Live CD include an installer as well or do I have to download
a separate ISO to install onto HDD
P4 2.4gHZ 2.0GB Ram I have tried to do some reading on this by googling and such, but it is all a bit overwhelming and so many posts/articles want to deal with dual booting which I am not planning to do on this machine. I am trying to find some info on whether it is better to have a separate boot partition. As in, separate from root partition. I have read that a separate boot partition makes for a quicker start and better recovery if system crashes. I will shortly be installing openSuse 11.2(KDE) [currently on 11.0] and I want to optimise the partition scheme so that it is the most efficient. I have a 160GB HDD that will be housing this new installation, so space is not a problem. I am only user on this machine. Currently, it is just partitioned as such:
2.0GB - swap [because I read it should equal Ram]
32.0GB - /
40.0GB - /home
76.8GB - extra storage [Not really necessary as I have 2 other HDD on system 1 - 320GB and 1 - 200GB]
Also, is it recommended to have separate partitions for /tmp /var or any other /nnn ?
I want to get into the Linux world and trying to install openSuse 11.3 on a separate partition, so I can start getting familiar with it. Installation started and PREPARATION was OK. INSTALLATION WAS OK. While doing Automatic Configuration after a little while the program stops (it hangs). I have to restart the computers by pushing the hdw reset button.
At next reboot, at the partition menu I choose openSUSE option; the program starts and after a while it says that previous installation failed and ask me if I want to retry. I do choose yes, but than again same thing happens - hangs and does not complete automatic configration (which by the way seems to be the last step of the installation). PC is a 2,8GHz, 1GB RAM, Windows OS XPHome and Service PAck3, and now partially loaded openSUSE11.3. OS
I have a dual boot system with Vista and OpenSUSE 11.3 . Linux is distributed over 2 partitions: one for /home and one root partition for all the rest. As this root partition is getting filled, I thought of taking a 10 GB partition from the Vista partition and using this for the /usr folder (= 6 GB). This partition is a primary partition, while the rest of Linux is on secondary partitions.To be save, I renamed the existing /usr to /usr-old and created an empty /usr as mount point. I changed fstab to load the root partition, the /usr partition and then the /home partition.But when I started the system, there were a lot of errors about files not found in the /usr folder, lthought this folder and is content were clearly present when browsing the filesystem. What went wrong? Hard links? Other system configurations to change? Not possible to put /usr on a separate partition?
View 9 Replies View RelatedI am taking a course to truly learn Linux and am attempting to install Slackware 13.X to a separate USB hard drive. The intent is to keep Windows while learning Linux, and all I have to do is insert the USB drive when needed. I am using cfdisk and have no difficulty getting to the point where it wants me to partition the hhd. However, whether I have the USB connected or not, it will always present the HDA for partitioning. How do I tell cfdisk to recognize and set partitions on the USB hard drive? (i.e.) What is the command?
View 9 Replies View RelatedI'm 'trying' to dual boot WinXP and Ubuntu 10.10 from 2 separate HDD's. Currently I'm on attempt number 6 but my patience wore thin about 2 days ago - here's the current state of play: I have WinXP running fine (Was installed first) and I have Ubuntu running fine if I use a boot loader disc. I don't have any boot options at all - if I let the PC boot naturally then it just loads XP as normal. I followed this guide to the letter: [URL]
(For those that don't want to read the link: It get's you to create 4 partitions on a drive - 1: ntfs for winxp (not touched) 2: Linux partition 3: linux-swap partition 4: fat32 osshare partition) then if you get no boot options, it creates an ubuntu.bin file which you move to the C: and edit the boot.ini to include it in the options). But all the difference it makes is I get boot options, I press Ubuntu and my computer sits with a blinking cursor for as long as you let it.
I'm trying a fresh install of 11.2 but I couldn't figure out how to make the whole installation on the same logical extended partition.
It always wants to create a separate /home partition.
I have a second HDD with NTFS only for backup purposes, but the installer puts a grub entry for it too (windows 2). And this HDD is not even bootable. I don't have the balls to try to boot from it and see what happens. How to get rid of it?
Saw a reference to putting the swap partition on a separate drive--just minutes after I was considering that approach. Can't find anything recent on the topic, so asking: Is there an advantage to having /swap on a separate HD from data on /home? My thought was that both disks could be active at once, perhaps speeding up a busy application.
View 1 Replies View Related