OpenSUSE Install :: 11.3 On A Separate Partition - Hangs
Oct 24, 2010
I want to get into the Linux world and trying to install openSuse 11.3 on a separate partition, so I can start getting familiar with it. Installation started and PREPARATION was OK. INSTALLATION WAS OK. While doing Automatic Configuration after a little while the program stops (it hangs). I have to restart the computers by pushing the hdw reset button.
At next reboot, at the partition menu I choose openSUSE option; the program starts and after a while it says that previous installation failed and ask me if I want to retry. I do choose yes, but than again same thing happens - hangs and does not complete automatic configration (which by the way seems to be the last step of the installation). PC is a 2,8GHz, 1GB RAM, Windows OS XPHome and Service PAck3, and now partially loaded openSUSE11.3. OS
P4 2.4gHZ 2.0GB Ram I have tried to do some reading on this by googling and such, but it is all a bit overwhelming and so many posts/articles want to deal with dual booting which I am not planning to do on this machine. I am trying to find some info on whether it is better to have a separate boot partition. As in, separate from root partition. I have read that a separate boot partition makes for a quicker start and better recovery if system crashes. I will shortly be installing openSuse 11.2(KDE) [currently on 11.0] and I want to optimise the partition scheme so that it is the most efficient. I have a 160GB HDD that will be housing this new installation, so space is not a problem. I am only user on this machine. Currently, it is just partitioned as such:
2.0GB - swap [because I read it should equal Ram] 32.0GB - / 40.0GB - /home 76.8GB - extra storage [Not really necessary as I have 2 other HDD on system 1 - 320GB and 1 - 200GB]
Also, is it recommended to have separate partitions for /tmp /var or any other /nnn ?
I have a dual boot system with Vista and OpenSUSE 11.3 . Linux is distributed over 2 partitions: one for /home and one root partition for all the rest. As this root partition is getting filled, I thought of taking a 10 GB partition from the Vista partition and using this for the /usr folder (= 6 GB). This partition is a primary partition, while the rest of Linux is on secondary partitions.To be save, I renamed the existing /usr to /usr-old and created an empty /usr as mount point. I changed fstab to load the root partition, the /usr partition and then the /home partition.But when I started the system, there were a lot of errors about files not found in the /usr folder, lthought this folder and is content were clearly present when browsing the filesystem. What went wrong? Hard links? Other system configurations to change? Not possible to put /usr on a separate partition?
I'm trying a fresh install of 11.2 but I couldn't figure out how to make the whole installation on the same logical extended partition.
It always wants to create a separate /home partition.
I have a second HDD with NTFS only for backup purposes, but the installer puts a grub entry for it too (windows 2). And this HDD is not even bootable. I don't have the balls to try to boot from it and see what happens. How to get rid of it?
Saw a reference to putting the swap partition on a separate drive--just minutes after I was considering that approach. Can't find anything recent on the topic, so asking: Is there an advantage to having /swap on a separate HD from data on /home? My thought was that both disks could be active at once, perhaps speeding up a busy application.
I am setting up a LAMP server for my home LAN. I want to move the data out of / into a new disk partition for ease of backup and especially away from any clean installation I might do. What
I have in mind: Shut down MySQL and Apache Make a new partition, format as ext4 Mount new partition on /mnt Copy all of /srv to /mnt Copy MySQL stuff from /var/lib/mysql to /mnt/mysql Update /etc/my.conf to point to /srv/mysql Unmount /mnt Update /etc/fstab to mount new partition on /srv mount /srv Start mysql, apache
Will a fresh install or upgrade keep its fingers out of /srv, in the same way as /home? Or will those parts of apache installed in /srv/www be updated?
using Opensuse 11.3, I have used Ubuntu 9.10 in the past and have had a blast with Linux. I have to rehash some of my old skills that I have forgotten in the past several years..I installed 11.3, everything is working fine. However, I just releazed that after I installed it, I used my whole partition (Not Windows 7, or I would've been in hell). My Windows 7 is in Raid 0. My second HDD is 1 TB and 11.3 is on there. So, how can I trim down let's say 100 GB and just give the rest to Windows (800gbs). I need that much because I do editing for videos, etc. So, once again, how can I trim my partition and use it for Windows 7.
How would I go about moving a separate home partition back to /, and be able to delete the /home partition? I'm assuming I would have to copy the contents of /home to the root partition, and change fstab at the very least.
I just bought a new hard drive so that I could convert my XP-only machine into an XP-Ubuntu-Windows 7 triple boot machine.Since the drive is absurdly huge (1 TB) I wouldn't mind throwing ReactOS into the mixtoo.I just found out that master boot records are limited to 4 entries, meaning 4 primary partitions. I had Windows XP set up on my old drive as a boot partition, a program files partition and a media partition. Since I really didn't want to install XP from scratch, I cloned this setup on my new drive.
This leaves me one MBR partition entry for installing Windows 7, Ubuntu and ReactOS. I'd like to avoid having to install XP from scratch like the plague, partly because it's supposed to be a safety net in case things go wrong with my other OS's and because I've invested a lot of time getting it set up exactly the way I like it.Here are the options I've considered and why I don't like them:Install Windows 7 on my media partition. This would work, but I prefer to keep my media partition completely separate from any OS, so that I can reformat an OS partition without affecting my media partition at all.
Use wubi or something to install Ubuntu in the same partition as something else. Again, this is brittle.Move all my media to a logical drive on an extended partition. Create another logical drive on this extended partition for Ubuntu. The problem here is that extended partitions are rather brittle--if you nuke one, it renders the rest useless.Just put the old drive back in my computer and run XP off it. Use the new one for the other OS's. The problem here is that the old drive is slower and uses extra power, generates extra heat, etc.
I recently put ubuntu on my laptop in hope that most of my games would run through wine, some did and some didn't.
Anyway, long story short, I have ubuntu on my laptop and I want to re install windows onto a separate partition, keeping my ubuntu instillation in tact and set as my deafault OS.
I'm very new to ubuntu and the only guides i've seen are fairly complex. I was just wondering if anyone could point me in the right direction? p.s. Is there maybe a way to create an image of my current ubuntu nstillation/settings/apps etc. just in case I do something wrong and lose everything?
Where can I install grub? I know it can be installed to the mbr of a hard drive. I also know it can be installed to a /boot partition. Can I install it to a lvm partition? Does it have to be /boot? grub-install --root-directory=/boot /dev/hda Does this command install grub to a partition and link it to a separate /boot? I have fedora, but this is a live cd. I need to learn where I can install grub2 to boot
I've read several accounts of users who upgraded Ubuntu versions and ran into problems. I read that putting /home on a separate partition can make it easier to do upgrades. But it seems to me application versions and even the default applications themselves change so much between Ubuntu releases that I question whether it's a good idea to have all the "OLD" config files and settings that get stored in /home sitting around when running a new Ubuntu release.Does anyone think it's a better idea to just put the whole Ubuntu install (i.e., / and /home) on the same partition? And then when upgrading, backup, and then just fresh install everything (to get the cleanest possible installation)?
Looks like I missed defining a /home dir during installation. It's been a while I have a spare partition now that I'd really love to use. Can you specify this still, or is it only allowed during an install?
install fedora 11 on Vista I want to keep the windows boot loader and also install on a usb drive or a seperate partition that has 10GB free "install doesn't see partition's". Recently I installed ubuntu and had a major problem with booting, without having the usb drive connected I couldn't boot windows so uninstalled it. I'm trying to install now but install does'nt give me any option to select partitions from my drives one 320GB "portable, 3 partitions" and 80GB "main os 2 partitions one partition has 10GB free"
My debian 5 is up and running smoothly and act as file-server in the middle of windows network jungle using samba the only problem is, after backup an external hdd (213 GB) to my /home partition, I end up with message say that I'm running out free space. Fyi my debian installed on 1TB SATA disk, and I separate my /home partition from system what happen to my free space ? here is screenshot of my disk, using disk usage analyzer: is there is a way to get my space back or something missing on my setup.or I have to reinstall my debian and use LVM when partitioning my disk?
Will the above procedure accomplish this objective, without crippling openSUSE ? The second swap partition has never shown any activity (on SUSE). I understand (from Using shared swap files) that a single swap partition may be shared. Since these areas are relatively small, It is not inconvenient to maintain separate swap partitions.
We were trying to install w7 on a reserved partition. W7 did not like the partition (whatever we tried).
Since we had 3 hard-drives, on the allocated drive we deleted all partitions and set the partition table type new to MSDOS (yast etc.....).
W7 installed fine. We did not time it, but it appeared that 11.3 installs faster plus considering 11.3 installs quite a number of applications.
There are plenty of postings re integrating W7 to the Grub-menu.
This system went through several Suse updates, hardware upgrades, basically was all over the place.... we did a "new" install of 11.3 allocating its own hard-drive.
Install......fine, and Grub entered W7 to the menu. Worked ! Mounted the windows partition to /home/yourusername/windows
So, if you really (?) need W7 and have a spare hard-drive, this maybe is a clean solution.
I was surprised not to find an existing thread on this anywhere, as I would expect this to be a common problem: I have the following partitions on my eee PC 100HE:
10GB Windows XP 5GB Linux Mint 8 5GB Ubuntu 9.10 NBR (awesome distro by the way!) 130GB Home partition shared by Linux Mint and Ubuntu NBR 2GB Swap partition shared by Linux Mint and Ubuntu NBR
I installed Ubuntu NBR after Mint. Immediately after install, the panel layout, menus and colour scheme were slightly messed up - presumeably because they had been "adopted" from the Mint settings in the home folder. I corrected them easily, but now I have the same problem in Mint. Is there any way I can get both distros to use the same /home folder, but different settings (i.e. the /home/username/. folders)? Can I get these settings folders put on a different partition for example?
And is this problem due only to the fact that these are 2 Ubuntu-based distros? Or will I have the same problem if/when I replace Mint with another distro, such as Fedora or Moblin?
I recently tried to upgrade my openSuSe 11.1 system using the instructions at:
SDB:System upgrade - openSUSE
I successfully got the system to 11.2, but the upgrade from 11.2->11.3 went awry. The installation froze during the update, and I had to start it over. The first issue I had to deal with was the fact that rpm had been upgraded and zypper hadn't, so zypper wouldn't function because older rpm files that it would search for had been deleted. After rolling back rpm to a previous version, I managed to complete the upgrade to 11.3 and everything looked good. However, when I rebooted the system, it hangs at a blank screen. More precisely, the system seems to get through all of the BIOS stuff and then hang while loading the OS (I assume). Although I've worked on Windows boxes for a long time, I'm a complete novice at OS installations/upgrades for Linux systems, so I'm not even quite sure where to begin to troubleshoot this. Ideally, I'd like to be able to fix the installation on the system to save the data on the hard drives, but I realize this might not be possible. My first thought was to use a recovery tool that I'd seen on some Linux installation CDs, but I see that for openSuSe 11.3 and on that utility has been dropped. I can, however, use the disk to get to the "Rescue" command prompt, so maybe there's something I can do from there?
I keep my /home on a separate partition. After every clean install of Ubuntu my old panel configuration is loaded. Meaning, shortcuts on my panel and different applets I've put on my panels as well.
what file in the /home folder is keeping these settings? Simply, I'd like to delete so I can have that "fresh" install feeling on my desktop.
is their a boot partiton that need to be kept seperate in ubuntu? Screenshot.png those are my partitons in the pic above am i okay to merge them all into the dev/sda2 or is it like windows and i need to keep a small section back for the boot?
I have installed various distros/releases of linux over the past few days and have read of a few people keeping separate partitions for their /home folders. I have a few questions:
1) I assume /home is installed with the OS and would always be on the OS partition.
2) Can I repartition the drive even though I am already installed to allocate space or would I have to start from scratch, create the partitions, and reinstall the OS?
3) How much space would one need for a home folder? Majority of hdd right?
I have a Dell Inspiron M5030 and ran the live Gnome CD. everything works until I install. The install goes fine and it boots fine but when i log in it just hangs at the desktop with a spinning cursor. No menus no nothing just the wallpaper?
I run several OSes (all Linux) on my computer. I set a separate partition for each one. I want to run Fedora 13 LXDE mainly for a game or two that are in the Fedora repos but not in any others, so I will not need a lot of space. But I want to make sure there is enough room for the OS.
I want to be able to play CloneKeen, so I will need enough space for that. I may find some other games, as well, so I will need some extra space. I have my other two OSes on six GB apiece, and Peppermint actaully uses barely half of that. Will 6GB be enough for a basic Fedora install with a few games installed? I will not really use Fedora for anything else, probably.
I'm about to reinstall Ubuntu and one thing I'd like to do is create a separate partition for /home. also what are the exact benefits of that?upgarding ubuntu doesn't necessarily delete your files right?is it just as a security measure in case the kernel becomes corrupted?
I have ubuntu installed as my main operating system with a separate home partition, I also have windows 7 here, although I haven't used it since I installed it. I was planning on using it a bit more, since I'm getting a bored of ubuntu, so I thought I'd get a little variation Anyway, I have this separate home partition (ext4) formatted, that I logically can't access from windows. So I thought I'd make a "shared" partition (NTFS) with my files on it, so I could access them from both ubuntu and windows. Now, can I revert to having my home partition on my Ubuntu partition, or do I have to reinstall or something?
I've been wanting to do this for awhile now, But just got around to having the time/energy to do it.Getting a separate /Home partition is my main goal,But Ive got a couple others as well.
I've never really done much work manually editing/extending/creating of partitions, Soo Im going to need really simple, noob-like instructions if possible. I'd love to get this on the first try without having to start all over.. So I come to you first, before I just jump in and start clicking things.
I have a 320gb USB hard drive, one partition for my files, one for playing Wii games, and one which I would like to use for an Ubuntu instillation.o do this, I partitioned my disk accordingly using Windows, then booted from the Ubuntu CD to install the OS to my external hard drive partition. It asked me where I wanted to install the boot loader, so I selected the hard drive itself, rather than the specific partition, reasoning that it would scan the hard drive for a boot record.However, when I booted it (with USB boot selected) it simply said "No Operating System found, replace system disk and press en
I have a 320gb USB hard drive, one partition for my files, one for playing Wii games, and one which I would like to use for an Ubuntu instillation. To do this, I partitioned my disk accordingly using Windows, then booted from the Ubuntu CD to install the OS to my external hard drive partition. It asked me where I wanted to install the boot loader, so I selected the hard drive itself, rather than the specific partition, reasoning that it would scan the hard drive for a boot record. However, when I booted it (with USB boot selected) it simply said "No Operating System found, replace system disk and press enter" or something similar.
