General :: Create Separate Partitions For Directories AFTER Installing?

Sep 28, 2010

I want to create a separate partition for /home.inuxMint is *already* installed.PartedMagic be used for the same, NOW

View 14 Replies


ADVERTISEMENT

Ubuntu Installation :: System Directories On Separate Partitions - Redo All From Scratch

Feb 23, 2010

I have a netbook with limited storage. 8GB internal and a 16GB SD card. Right now I have Ubuntu installed on the 8GB internal storage with a few directories mounted on the 16GB SD card. (/usr and /usr/local). This has worked out fairly well for me as having the entire installation on just the 8GB drive was too limiting. When I tried this I didn't know how big to make the partitions I was mounting in. These partitions are 7.06GB for the root (on internal storage) 2.8GB for /usr/local and another 2.8GB for /usr (both 2.8GB partitions are on the 16GB SD with the extra space being media storage for me). It seems I didn't make these partitions big enough because I can no longer perform updates. I'd like to redo all of this from scratch. how would you recommend I partition this next time around? Do I need individual partitions for the separate mount points that aren't root? Are those the directories I should be mounting on the SD card?

View 1 Replies View Related

General :: Installing Multiple Distros - Create Another / And /home Partitions For The New Distro?

Nov 20, 2010

My partition layout is as follows:

sda1: 14GB / ext4
sda2: 10GB /iso ext4
sda3: 4GB /home ext4
sda4: 86GB Extended
sad5: 2GB swap

I have 84GB free space on this hard drive and want to install another distro. Will I be able to create another / and /home partitions for the new distro?

View 6 Replies View Related

General :: Create A Backup Directory And 3 Directories Within That And Some Files Within The 3 Directories And Then Back Them Up Ot Restore Them?

Dec 19, 2009

i am in need of linux help. iam at college and i need this back/restore script to pass this final part of an assessment. i require a backup script that will not only backup but also restore files to the relevent directories. e.g. users are instructed to store all wordprocessor files in a directory named wp. so i am needing to create a backup directory and 3 directories within that and some files within the 3 directories and then back them up ot restore them. l know i should/have to do this myself by been trying to get/understand info for the last few days and came up with zero.

View 14 Replies View Related

General :: Multiple Users To Create Directories Over SFTP So The New Directories Keep The Same Permissions?

May 15, 2011

I want to make a webserver with multiple users allowed to login through SFTP to a specific folder, www.Multiple users are added, lets say user1 and user2, and all of them belonging to the www-data group. The www directory has an owner www-data and a group www-data.

I have used chmod -R 775 on the www folder, but after I try to create a folder test through my SFTP server (using Filezilla) the group of the directory created has only r and x permissions, and I am not able to log in with the second user user2 and create a directory within www/test due to a lack of w permission to the group.

I also tried using chmod 2775 on www directory, but without luck. Can somebody explain to me, how can I make it so that a newly created directory inherits the root directory group permissions?

View 2 Replies View Related

General :: Directories That Often Stored On Their Own Partitions?

Jun 14, 2011

What directories are often stored on their own partitions?

View 2 Replies View Related

Programming :: Link Objects In Separate Directories Using KDevelop?

Oct 4, 2010

Using: Open SUSE 11.0 64 bit, KDE 3.5.9 (release 49) and KDevelop 3.5.1. Problem: A singleton was created in subproject A, and so an object file is created in subproject A. In subproject B, I want to use that object file. We have not been able to find a way to link that object file created in subproject A with subproject B. Also, the subprojects are in different directories. We created a symbolic link to the ".h" and ".cpp" files in directory A. And the project compiles and links just fine after adding the symbolic link to the header and cpp files in subproject B. My concern is, that two objects of that singleton will be created. The whole idea of making a singleton is so that there is only one instance at a time.

View 8 Replies View Related

General :: Cannot Create User Home Directories?

Jun 4, 2010

Why when I command "useradd -m barth" do I get the error message: "cannot create directory /home/barth"? It only does this when a partition is mounted to /home.

View 14 Replies View Related

General :: Create Directories From A File List?

Jun 30, 2011

I am trying to write a script to pick the directory name from a list of file. Here is a detailed picture.Have a file name LIST which contains the follwing for example/apps/oracle/product/test1/apps/oracle/product/test2/apps/oracle/product/test3I need a script that reads these line from LIST and creates foldersin /apps/oracle/product/test1/backup/date/test1 after reading the first line
/backup/date/test2 after readin the second line/backup/date/test3 and so on.

View 15 Replies View Related

General :: Installing Mint 8 On Separate Partition?

Feb 16, 2010

want get Linux mint8 on to a separate partition but when i go into advance in the partition menu and and chose the partition i want,in this case (e),(c) having windows xp on it.it says ...no root file system is defined.

View 6 Replies View Related

General :: Virtualbox - Can't Create Directories In Virtual Box Shared Folder?

Jul 28, 2011

I'm mounting a shared folder in an arch linux guest on a windows 7 host in Virtual Box. The shared folder's filesystem is ext3 and is mounted in windows 7 with Ext2Fsd. I mount the shared folder at boot with this fstab:

D_DRIVE /home/tony vboxsf rw,gid=1000,uid=1000,auto 0 0

I believe my user in the guest OS has the right uid and gid:

[tony@kiwi ~]$ id uid=1000(tony) gid=1000(tony) groups=1000(tony),1002,(vboxsf)

I can create files and remove them fine, but I can't seem to create directories.

[tony@kiwi ~]$ mkdir foo mkdir: cannot create directory `foo': Protocol error

Its weird because the directory looks like its there, sort of.

[Code]...

View 1 Replies View Related

General :: If Some Users Modify/delete/create Files/directories?

Oct 25, 2010

i've been wondering how do i know if some users create/modify/delete file/directory in linux, i've been using pyinotify in python script.this script like the example from the manual:

Code:
#!/usr/bin/python
import pyinotify, os, time

[code]...

View 10 Replies View Related

General :: Command Line - Create Directories That Don't Exist While Creating A New File?

May 8, 2010

I can do:mkdir messages and then: touch messages/hello.txt Is there a command that will do both - create the directory if it doesn't exist, and then the empty file? Something like: touch -p messages/hello.txt

View 1 Replies View Related

General :: Slackware 10 Will Not Let Me Create Partitions

Oct 27, 2010

OK, trying to install Slackware version 10 on the Athlon XP Shuttle PC and been hit back hard at the very first hurdle.In short I can't create a partition in Linux.At all!CD boots up OK. Loading in basic kernal.I try and create a partition using either fdisk or cfdisk.BOTH apps reports that the partition table cannot be written to! Both apps run read only mode.So I am unable to create any partitions in Linux.

I booted up a Windows 98 floppy and checked the partition table.Two x30GB partitions.I deleted both of them in case Linux did not like a Fat32 DOS/XP partition table.Tried again. Same read only messages.Attempt to use 'w' in fdisk reports the partition table cannot be written to.Viewing the partion table returns nothing, no matter how I set it up in DOS/Windows.

Only clue is that to my surprise, the DVD RW drive is the Primary master and the 60GB HD is the secondary master. I must have slipped up installing the drives years ago and Windows didn't care. Would Linux? Other than that, nothing in the BIOS that gives a clue. I turned off ACPI support in case. I also tried the ACPI kernal. No joy there either. But DOS/Windows quite happy to build partitions.Cfdisk states that no partition tables exist even after Windows has just created one.So I am at a loss.Any clues? This is a Shuttle PC so the tech is a bit propritory but nothing that various renderings of Windows have not handled.

View 6 Replies View Related

General :: How To Create Partitions On OS Running?

Mar 15, 2011

i have server and there is no option from my control panel on data center to make os reload with partitions i need for Openvz , so how can create partitions ? the server have 2 hard.

View 5 Replies View Related

OpenSUSE Install :: Maintain Separate Swap Partitions?

Sep 9, 2010

On my triple-boot PC:

Code:
SuLinux:~ # fdisk -l
Disk /dev/sda: 250.1 GB, 250059350016 bytes
255 heads, 63 sectors/track, 30401 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes
Sector size (logical/physical): 512 bytes / 512 bytes

[Code]....

Will the above procedure accomplish this objective, without crippling openSUSE ? The second swap partition has never shown any activity (on SUSE). I understand (from Using shared swap files) that a single swap partition may be shared. Since these areas are relatively small, It is not inconvenient to maintain separate swap partitions.

View 9 Replies View Related

Ubuntu :: Install In Laptop Over Window 7 In A Separate Partitions?

Jan 6, 2010

I have Sony Vaio nw23 ne laptop. This came with window 7 home basic 64 bit, so my question is that can I install Ubuntu over window 7 in a separate partitions

View 2 Replies View Related

Ubuntu :: Fresh Install Of Windows On Two Separate Partitions?

Jan 25, 2010

how to do a fresh install of Ubuntu and Windows on two separate partitions? When I install windows and leave a partition for linux, the "Side by side" setup isn't what I'm looking for. Manually doing it made me a little uneasy.

View 5 Replies View Related

General :: Automatically Create Windows Partitions?

Mar 19, 2010

How to automatically create windows partitions(fat/ntfs) through Linux. I have all the required information for partitions to be created.

For example:

Size
Flag
Partition Type
etc.

View 2 Replies View Related

General :: How To Manage / Create Partitions For Multiple OS

Aug 3, 2011

How do I divide my hard drive into multiple OS'es/partitions for my test machine? For example:
Win XP
Win 7
Gentoo
Ubuntu
Storage
Can Linux'es share swap area? I was told to leave the first primary for the grub and linux cores.

View 1 Replies View Related

General :: Cannot Create Logical Partitions Without Errors

Jan 14, 2010

I have run into a Gparted problem that I am not familiar with. I've never seen it before.

I cannot create logical partitions without errors or not at all. I have two choices:

1) not checking 'round to cylinders' - I will get an error* and it will not partition

2) check 'round to cylinders' - it will partition but I will also obtain 4MB of unallocated space (each time)

This applies to Primary partitions, too, I think. At least, #2 will happen.

Imho, this is ridiculous. Why would I retain 4MB of unallocated space? In other words, the two choices above are not choices.

The error message doesn't explain much if anything either. *"Unable to satisfy all constraints on the partition"

View 9 Replies View Related

General :: Create A Boot Cd That Will Mount Some Partitions?

Sep 26, 2010

I want to create a boot cd that will mount some partitions, copy a file, run lilo, then eject the cd and reboot the computer.

View 1 Replies View Related

General :: Create A RAID Set Up And Merge Partitions?

Aug 7, 2009

I have three hard drives in my computer That I want to make RAID 0. All of them already have partitions and data on them. What I want to know is if I can, without losing data, add the disks to RAID and then merge the partitions? All the partitions are of the same type. Or would it easier/better/possible to do this with LVM? Even if I'd have to shrink partitions and copy data to a new LVM one to get it set up properly, would it be better than RAID 0?

View 2 Replies View Related

General :: Create A Bash Script To Remove All Partitions On Harddrive Via Fdisk?

Jul 19, 2010

I would like to remove/create partitions on a harddrive without going into the menu of fdisk.

can one pass options to fdisk to create and delete without going into the menu? So that I can write a script to do that automatically.

Or if fdisk isn't capable, what other alternatives do I have?

View 5 Replies View Related

General :: Partitions Don't Appear While Installing Ubuntu 10.04

Apr 27, 2011

My computer is currently running on Windows 7 and I had a spare partition formatted as ntfs. At first I tried to install ubuntu to that partition. Everything was fine, ubuntu recognized my previously installed OS and all partitions. At some point during the installation, however, it is recommended to have another partition formatted as swap.Then I split the partition into two parts and formatted one as swap and one as ext3 using Acronis Disk Director.

Then I restarted my computer to install ubuntu to new partition. This time it did not recognize any of the partitions and said that "there are no operating system on this computer." The whole disk was appearing as one partition.At that time, I quitted installation and go back to Windows 7, it was working properly. I booted using Acronis Disk Director and partitions were in their proper place.I tried formatting back to ntfs and then to swap and ext3 again, nothing changed. (I also tried several other combinations, nothing worked.)

View 2 Replies View Related

General :: Access Old Partitions After Installing Ubuntu?

Jun 10, 2011

This might be a really silly question, but I installed Ubuntu yesterday (which is awesome) but I can't seem to locate any of the other drives that I had hooked up. It's as if the partition with the install is the only one in existence. Is there some trick of the trade I'm not aware of or what's up?

View 1 Replies View Related

Ubuntu :: How To Create New/Separate User

May 5, 2010

I want to try out KDE on Lucid, but I don't want to install KDE on top of ubuntu, because I will end up with two sets of applications and software that is gnome specific to load in the KDE environment.SOOOOO, I want to create a separate user that is only KDE and a user(my current one) that is only gnome. Different names, different environments and applications.

Also, if it is possible, I will need instructions to remove a user as well, so in the future I decide which one I like better, I can delete the other user account.

View 3 Replies View Related

Ubuntu :: Create A Launcher That's Doing Two Separate Commands

Sep 23, 2010

I'm trying to create a launcher that's doing two separate commands. Here's currently what I have.

Code:

rm ~/Games/Nintendo DS/NO$Zoomer.ini; wine ~/Games/Nintendo DS/NO$Zoomer.exe

Now, the reason I have to delete the .ini file, is for some reason the file gets corrupted every time (it's a well known problem, from what I've read.) and I can't start up the program until it's removed. Now, it works fine in Terminal, but when I run it through my Launcher icon, it does nothing.

View 4 Replies View Related

Software :: Create A DVD With A Separate Chapter For Each .avi File?

Mar 2, 2010

I use DeVeDe a lot, and it works great for general conversion and DVD authoring. I don't know, however, how to create a DVD such that each of the original .avi files will be their own chapters. In other words, I have about six or seven .avi files (episodes of a season of a television show) and I want to create a DVD with those episodes that I can navigate separately. Do I first convert each .avi? How then do I create a single DVD with six or seven chapters/episodes?

View 2 Replies View Related

OpenSUSE Install :: Create A Separate /home Partition?

Mar 3, 2010

I'm trying a fresh install of 11.2 but I couldn't figure out how to make the whole installation on the same logical extended partition.

It always wants to create a separate /home partition.

I have a second HDD with NTFS only for backup purposes, but the installer puts a grub entry for it too (windows 2). And this HDD is not even bootable. I don't have the balls to try to boot from it and see what happens. How to get rid of it?

View 2 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved