Saw a reference to putting the swap partition on a separate drive--just minutes after I was considering that approach. Can't find anything recent on the topic, so asking: Is there an advantage to having /swap on a separate HD from data on /home? My thought was that both disks could be active at once, perhaps speeding up a busy application.
View 1 RepliesOn my triple-boot PC:
Code:
SuLinux:~ # fdisk -l
Disk /dev/sda: 250.1 GB, 250059350016 bytes
255 heads, 63 sectors/track, 30401 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
[Code]....
Will the above procedure accomplish this objective, without crippling openSUSE ? The second swap partition has never shown any activity (on SUSE). I understand (from Using shared swap files) that a single swap partition may be shared. Since these areas are relatively small, It is not inconvenient to maintain separate swap partitions.
Does one need to Check the Swap filesystem, from time to time
View 4 Replies View RelatedI recently installed Cent-Os on a server and changed the default partitioning to have 2 partitions - 1 main area for everything and a swap partition of 8Gb After installation I cant see the swap as a separate partition although there is a 16GB tempfs mounted as /dev/shm Is this right ?
fdisk -l shows :-
Device Boot Start End Blocks Id System
/dev/cciss/c0d0p1 * 1 13 104391 83 Linux
/dev/cciss/c0d0p2 14 17844 143227507+ 8e Linux LVM
(first partition being non-lvm boot)
install fedora 11 on Vista I want to keep the windows boot loader and also install on a usb drive or a seperate partition that has 10GB free "install doesn't see partition's". Recently I installed ubuntu and had a major problem with booting, without having the usb drive connected I couldn't boot windows so uninstalled it. I'm trying to install now but install does'nt give me any option to select partitions from my drives one 320GB "portable, 3 partitions" and 80GB "main os 2 partitions one partition has 10GB free"
View 3 Replies View RelatedP4 2.4gHZ 2.0GB Ram I have tried to do some reading on this by googling and such, but it is all a bit overwhelming and so many posts/articles want to deal with dual booting which I am not planning to do on this machine. I am trying to find some info on whether it is better to have a separate boot partition. As in, separate from root partition. I have read that a separate boot partition makes for a quicker start and better recovery if system crashes. I will shortly be installing openSuse 11.2(KDE) [currently on 11.0] and I want to optimise the partition scheme so that it is the most efficient. I have a 160GB HDD that will be housing this new installation, so space is not a problem. I am only user on this machine. Currently, it is just partitioned as such:
2.0GB - swap [because I read it should equal Ram]
32.0GB - /
40.0GB - /home
76.8GB - extra storage [Not really necessary as I have 2 other HDD on system 1 - 320GB and 1 - 200GB]
Also, is it recommended to have separate partitions for /tmp /var or any other /nnn ?
I want to get into the Linux world and trying to install openSuse 11.3 on a separate partition, so I can start getting familiar with it. Installation started and PREPARATION was OK. INSTALLATION WAS OK. While doing Automatic Configuration after a little while the program stops (it hangs). I have to restart the computers by pushing the hdw reset button.
At next reboot, at the partition menu I choose openSUSE option; the program starts and after a while it says that previous installation failed and ask me if I want to retry. I do choose yes, but than again same thing happens - hangs and does not complete automatic configration (which by the way seems to be the last step of the installation). PC is a 2,8GHz, 1GB RAM, Windows OS XPHome and Service PAck3, and now partially loaded openSUSE11.3. OS
I have a dual boot system with Vista and OpenSUSE 11.3 . Linux is distributed over 2 partitions: one for /home and one root partition for all the rest. As this root partition is getting filled, I thought of taking a 10 GB partition from the Vista partition and using this for the /usr folder (= 6 GB). This partition is a primary partition, while the rest of Linux is on secondary partitions.To be save, I renamed the existing /usr to /usr-old and created an empty /usr as mount point. I changed fstab to load the root partition, the /usr partition and then the /home partition.But when I started the system, there were a lot of errors about files not found in the /usr folder, lthought this folder and is content were clearly present when browsing the filesystem. What went wrong? Hard links? Other system configurations to change? Not possible to put /usr on a separate partition?
View 9 Replies View RelatedI'm trying a fresh install of 11.2 but I couldn't figure out how to make the whole installation on the same logical extended partition.
It always wants to create a separate /home partition.
I have a second HDD with NTFS only for backup purposes, but the installer puts a grub entry for it too (windows 2). And this HDD is not even bootable. I don't have the balls to try to boot from it and see what happens. How to get rid of it?
I am setting up a LAMP server for my home LAN. I want to move the data out of / into a new disk partition for ease of backup and especially away from any clean installation I might do. What
I have in mind:
Shut down MySQL and Apache
Make a new partition, format as ext4
Mount new partition on /mnt
Copy all of /srv to /mnt
Copy MySQL stuff from /var/lib/mysql to /mnt/mysql
Update /etc/my.conf to point to /srv/mysql
Unmount /mnt
Update /etc/fstab to mount new partition on /srv
mount /srv
Start mysql, apache
Will a fresh install or upgrade keep its fingers out of /srv, in the same way as /home? Or will those parts of apache installed in /srv/www be updated?
using Opensuse 11.3, I have used Ubuntu 9.10 in the past and have had a blast with Linux. I have to rehash some of my old skills that I have forgotten in the past several years..I installed 11.3, everything is working fine. However, I just releazed that after I installed it, I used my whole partition (Not Windows 7, or I would've been in hell). My Windows 7 is in Raid 0. My second HDD is 1 TB and 11.3 is on there. So, how can I trim down let's say 100 GB and just give the rest to Windows (800gbs). I need that much because I do editing for videos, etc. So, once again, how can I trim my partition and use it for Windows 7.
View 7 Replies View RelatedHow would I go about moving a separate home partition back to /, and be able to delete the /home partition? I'm assuming I would have to copy the contents of /home to the root partition, and change fstab at the very least.
View 6 Replies View RelatedThis is the 1st time I am installing SUSE and I wanted to clear some of my doubts:I have the following computer specs:Core i32 GB RAM320 GB HDDATI Mobility Radeon 43301. Is creating a swap partition necessary while installing Suse 11.2?2. Will I be able to install 64-bit version of Suse on my computer?3. Will I be able to run Windows 7 side by side?4. Will I have any compatibility issues with my Display Adapter since I have had problems previously on Ubuntu with my onboard ATi Graphics..
View 9 Replies View Relatedwant to install 11.2 version. my machine config is as belows. pentium 4 with 1.8 gz, 512 ram and 15 gb hard disk. i want to know what should be the partition size specially for swap, root ,home etc.and what version i.e genome or kde should i install.
View 1 Replies View RelatedI got a new laptop, a Dell D400. I want to swap my hard-drive from my old laptop into the new one, and did so... but then got an error stating that my CPU didn't support PAE.
As far as I was aware I hadn't actually installed a kernel with PAE enabled [as I always pick a real-time kernel for audio work]: but then read that lots of the newer distibutions are enabling PAE by default [which is what's caused the problem].
Is there an easy way of disabling PAE in the existing kernel? Or would it be easier to downgrade to another version of OpenSUSE? I'm on 11.2.
I'm a "new" Linux user, have been using Ubuntu for the last year with no problem but I decided to try out a different distribution to get more experience. So I decided to go with openSUSE (which I have been using on a VirtualMachine back at work). I have download the ISO, created an liveUSB (because my laptop dvd isn't working properly) and wanted to install openSUSE on the hard drive partition where currently Ubuntu is. So, I suppose that in order to do this I should choose the option "Import mount points" and select the Linux partitions (drive and swap) and that would be it.
View 2 Replies View RelatedI want a subset of files on a usb to be less likely to corrupt or, have any contact with/ acess to, the rest of the files on the usb.
Q: is there any advantage in putting the subset on a separate partition within the USB drive?
one would have to exclude certain folders / directories but would the backup be possible if the system is up and running in its native "live" state ? Which directories could be excluded ? Does swap need to be turned off ? I would like to make incremental backups on a separate partition of the same hard drive. I will endeavour to backup the MBR/ Partition table using dd.
View 6 Replies View RelatedI just bought a new hard drive so that I could convert my XP-only machine into an XP-Ubuntu-Windows 7 triple boot machine.Since the drive is absurdly huge (1 TB) I wouldn't mind throwing ReactOS into the mixtoo.I just found out that master boot records are limited to 4 entries, meaning 4 primary partitions. I had Windows XP set up on my old drive as a boot partition, a program files partition and a media partition. Since I really didn't want to install XP from scratch, I cloned this setup on my new drive.
This leaves me one MBR partition entry for installing Windows 7, Ubuntu and ReactOS. I'd like to avoid having to install XP from scratch like the plague, partly because it's supposed to be a safety net in case things go wrong with my other OS's and because I've invested a lot of time getting it set up exactly the way I like it.Here are the options I've considered and why I don't like them:Install Windows 7 on my media partition. This would work, but I prefer to keep my media partition completely separate from any OS, so that I can reformat an OS partition without affecting my media partition at all.
Use wubi or something to install Ubuntu in the same partition as something else. Again, this is brittle.Move all my media to a logical drive on an extended partition. Create another logical drive on this extended partition for Ubuntu. The problem here is that extended partitions are rather brittle--if you nuke one, it renders the rest useless.Just put the old drive back in my computer and run XP off it. Use the new one for the other OS's. The problem here is that the old drive is slower and uses extra power, generates extra heat, etc.
I recently put ubuntu on my laptop in hope that most of my games would run through wine, some did and some didn't.
Anyway, long story short, I have ubuntu on my laptop and I want to re install windows onto a separate partition, keeping my ubuntu instillation in tact and set as my deafault OS.
I'm very new to ubuntu and the only guides i've seen are fairly complex. I was just wondering if anyone could point me in the right direction? p.s. Is there maybe a way to create an image of my current ubuntu nstillation/settings/apps etc. just in case I do something wrong and lose everything?
I am taking a course to truly learn Linux and am attempting to install Slackware 13.X to a separate USB hard drive. The intent is to keep Windows while learning Linux, and all I have to do is insert the USB drive when needed. I am using cfdisk and have no difficulty getting to the point where it wants me to partition the hhd. However, whether I have the USB connected or not, it will always present the HDA for partitioning. How do I tell cfdisk to recognize and set partitions on the USB hard drive? (i.e.) What is the command?
View 9 Replies View RelatedWhere can I install grub? I know it can be installed to the mbr of a hard drive. I also know it can be installed to a /boot partition. Can I install it to a lvm partition? Does it have to be /boot? grub-install --root-directory=/boot /dev/hda Does this command install grub to a partition and link it to a separate /boot? I have fedora, but this is a live cd. I need to learn where I can install grub2 to boot
View 3 Replies View RelatedI've read several accounts of users who upgraded Ubuntu versions and ran into problems. I read that putting /home on a separate partition can make it easier to do upgrades. But it seems to me application versions and even the default applications themselves change so much between Ubuntu releases that I question whether it's a good idea to have all the "OLD" config files and settings that get stored in /home sitting around when running a new Ubuntu release.Does anyone think it's a better idea to just put the whole Ubuntu install (i.e., / and /home) on the same partition? And then when upgrading, backup, and then just fresh install everything (to get the cleanest possible installation)?
View 9 Replies View RelatedI just added a 2nd SATA drive to my openSuse 11.2 desktop. What do I do now to partition and format? I want to partition some of the new drive for linux, and leave some of it unpartitioned for Windows (I dual boot). I want to leave my existing 1st drive as is. What tool do I use? How do I proceed?
View 4 Replies View RelatedI am new to linux , I installed Suse 11.3 a week ago on my new iMac 27'' core i7 and my experience have been wonderful so far. However I would like to install windows beside Suse (for games and windows only apps). I used bootcamp to create a 200G partition for Suse, and I would like to partition the bootcamp further to install windows beside Suse, and choose the OS at boot time using rEFIt. I searched google and couldn't find a guide for installing windows 7 when linux is installed first.
1- I want to learn how to partition the boot camp drive using suse to create an empty partition for windows install.
2- I want to learn how to install windows 7 on the mentioned partition without harming any boot configurations, as I said I want to be able to choose from the OSes at boot time using rEFIt bare in mind that the current installed OSes are suse 11.3 and OS X.
The hardware is a psystar box with 2 drives for os x and ubuntu respectively. I attempted install of ubuntu over older version of xubunut without physically disconnecting the os x drive After install I could not boot into either system. THEN I remembered something about the install problem that 10.4 has and installed ubuntu again, this time following the instruction regarding booloader install. Now I can boot ubunut fine, but of course when I select drive holing os x it hangs on 'Verifying DMI pool data....' I've been looking at some thread on here about dual boot problems with Win7 and such, but are any of the recommended diagnostic and repair steps relevant to my case, specifically testdisk and bootinfo scripts?
View 1 Replies View RelatedI just wonder how to best partition a harddrive with essential folders.
My current installation has a layout like this.
The rest is in '/' integrated.
Does it make sense to give more folders a own partition? And if so, how much should you apply to each folder?
There are 2 users on the computer and there is nothing special or big installed.
I have currently 2 more harddrives which host music/picture & movie data's.
The reason for my question is just that i want to save my data in case of one folder failing.
I would like to ask you if there is a robust way to mount as a drive a ext4 partition inside windows 7 and if it is possible to use it also to storing window's 7 data.
View 3 Replies View RelatedLooks like I missed defining a /home dir during installation. It's been a while I have a spare partition now that I'd really love to use. Can you specify this still, or is it only allowed during an install?
View 3 Replies View RelatedI tried two times to make an new partition (after the FAT partition on it) on my external hard drive with YaST>Partitioner.Fist I had tried ext3 now I have ext2 on it.Both times the partition (or the corresponding folder in /media) was only writeable to the superuser/root but not to a normal user (readable to the normal user). Root is the owner.The FAT-Partition on the same external drive is owned by the normal user who was logged in as I plugged the USB-cable in.I can unmount both partitions als normal user in natilus.1. Can I start nautilus as root to change the permissions?2. What have I done wrong? Should I use an SuSE Live-CD or an CD with an special partitioning-program instead?ng X20) openSuse 11.1 and Gnome 2.24.1 (mostly, 1 account is using KDE) and Kernel Linux 2.6.27.45-01.1-pae. "/home" is on an separated partition (as part of an extended partition). I have also 2 NTFS partitions for Windows XP (System and Data), and a FAT, a root (/) and a swarp partition.
View 9 Replies View Related