Slackware :: Install 13.X To A Separate USB Hard Drive
Jun 18, 2011
I am taking a course to truly learn Linux and am attempting to install Slackware 13.X to a separate USB hard drive. The intent is to keep Windows while learning Linux, and all I have to do is insert the USB drive when needed. I am using cfdisk and have no difficulty getting to the point where it wants me to partition the hhd. However, whether I have the USB connected or not, it will always present the HDA for partitioning. How do I tell cfdisk to recognize and set partitions on the USB hard drive? (i.e.) What is the command?
View 9 Replies
ADVERTISEMENT
Feb 5, 2010
I am helping my pal to get into Debian (yes first timer).He is running W7 on a 500G SATA HDD and he has another 250G SATA HDD that he wants Debian to go to.Will Debian install grub on the master bootloader even if the installation is going on a separate hard drive?I have dual boot before but on the same hard drive.
View 6 Replies
View Related
Apr 4, 2010
I am hoping to find some-one to help me install Slackware on a USB hard-drive and get it to boot. I get it installed just fine, except, when I go to boot into it, I get a kernel-panic --error message. I am sure its the kernel and that I need to some-how set up a initrd, however, I am a little rusty these days and can not quite seem how to do it. I have a Western Digital Passport external (USB) hard-drive. I will joy-in all help, and, I'll keep looking.
View 2 Replies
View Related
Dec 16, 2010
After I complete a big project I'm working on I'm going to be wiping and re-doing my desktop machine, probably in the next day or three. I'm going to be setting up a dual-boot; my first in about three years. I'll be using separate hard disks for this, and installing Slackware second on the bigger of the two drives. When I've done this in the past I've used Grub; Is there anything I need to know or pitfalls I need to avoid doing it with Lilo?
View 5 Replies
View Related
Feb 15, 2010
I have a file on a separate hard drive and it wont allow me to delete it.how I navigate to it in the terminal so I can remove directory there? I plug my usb lead in and go /hoome/boo/Iomega_HDD (name of the hard drive)but I cant get there,it doesnt show up as a directory.
View 3 Replies
View Related
Oct 21, 2010
I recently had a laptop die on me. I, of course, then to recover the hard drive. I wanted to install slackware to a partition on my drive, so I can have a linux distro with me( also I have a FAT32 partition for shared space) I have a Slackware 13.1 disk one (which i need, since I don't need a graphical environment or anything), and proceedd to follow setup program. I have a 5GB '/' partition, a 10GB '/home' partition, and a 2GB swap partition. My ROOT partition is bootable. The setup program seemed to complete succesfully, but it won't boot. When I choose to boot from my hard drive (in the bios), it reverts to the slackware disk, if present, or the standard windows drive.
I installed LILO to the superblock of my external, because according to the setup the MBR option installs to "The MBR of your first hard drive", and I wasn't sure if that was right, since my first hard drive is my windows one. Since i'm not even seeing LILO, I think it has to do with installing to the superblock. I want to be able to boot a basic linux distro if needed from whatever computer I want. I'm not sure if slackware was the right choice, but it was one that I had worked with installing before, and knewthat you didn't necasarraly have to instal all the graphics stuff. I just want a shell. Sorry if my question sounds retarted, I'm new to the whole "Multiple drives, and operating systems" thing
View 3 Replies
View Related
Mar 4, 2010
I'd like to install Lucid on a spare hard drive I have, so I can do my bit for testing it. I have a feeling that if I just burn the latest alpha .iso and install from that, it will replace my current GRUB, whereas I would prefer to simply add the Lucid install as an option in my current GRUB.
Of course I might be wrong, I just wanted to check before I went ahead with it. I was unable to find the info I needed via searching.
View 6 Replies
View Related
Jul 28, 2010
I would like to have 1 hard drive operate with Ubuntu 10.04 and another with Windows 7 Pro, with a proper boot selection menu when I boot up my computer.
View 5 Replies
View Related
Sep 29, 2010
I have Windows 7 x64 on a RAID0 Setup and have a separate 120GB Hard Drive and want to DualBoot with Ubuntu! How do I go by doing that seeing that LiveCD is not detecting Windows 7 Loader?
Twitpic : [URL]
View 3 Replies
View Related
Jan 22, 2010
one would have to exclude certain folders / directories but would the backup be possible if the system is up and running in its native "live" state ? Which directories could be excluded ? Does swap need to be turned off ? I would like to make incremental backups on a separate partition of the same hard drive. I will endeavour to backup the MBR/ Partition table using dd.
View 6 Replies
View Related
Feb 20, 2010
I'm getting a netbook with no cd/dvd drive but it boots off of usb, so I've made a slackware 13 usb stick to start the install. I also have a usb hard drive I was going to copy the packages to. I'm wondering... should I boot with the usb install stick and then connect the usb hard drive afterwards?
View 4 Replies
View Related
Oct 22, 2009
I need to install windows xp and linux in separate hard disk on my computer.Is it possible?
View 2 Replies
View Related
Oct 7, 2010
We were trying to install w7 on a reserved partition. W7 did not like the partition (whatever we tried).
Since we had 3 hard-drives, on the allocated drive we deleted all partitions and set the partition table type new to MSDOS (yast etc.....).
W7 installed fine. We did not time it, but it appeared that 11.3 installs faster plus considering 11.3 installs quite a number of applications.
There are plenty of postings re integrating W7 to the Grub-menu.
This system went through several Suse updates, hardware upgrades, basically was all over the place.... we did a "new" install of 11.3 allocating its own hard-drive.
Install......fine, and Grub entered W7 to the menu. Worked ! Mounted the windows partition to /home/yourusername/windows
So, if you really (?) need W7 and have a spare hard-drive, this maybe is a clean solution.
View 7 Replies
View Related
Jul 31, 2010
This question is somewhat open ended, so I'll describe the specific issue, what I want to accomplish in general, and what I tried to do. It'd be a little long, but hopefully not too daunting.For quite a while my approach to multi-OS boots has been to install each OS to a separate disk. When I want to boot a specific OS I change the boot drive in the BIOS. I find this convenient for several reasons, but mostly because I don't get boot manager conflicts. If I remove a disk or change the OS on it, this doesn't affect the booting of other OS's.
Note that when I say multi-OS, this meant until now multiple versions of Windows. I've occasionally tried some linux distros on VirtualBox, but now I want to do a full install, and see if I can use it as a main OS. (What prompted this was the recent release of Wine 1.2 and the fact that my new job doesn't involve any Direct3D or DDI work. I've always been partial to the open source movement, but I'm also fine with Windows and never before felt I could make the move without losing key abilities). My plan was (still is, if I can get it to work) to use Linux for everyday e-mail, web browsing and such, play Windows games over Wine, and install Windows 7 in VirtualBox for Windows development.I currently have two disks, one with my main Vista x64 installation, and the other with a Vista x86 installation which I used for my previous job and I no longer need. This is the disk I want to use for the Linux installation. It has a lot of partitions but quite a bit of free space (since I copied a 80GB disk and 250GB disk into a 500GB disk and haven't taken advantage of the extra space).My first choice of distro was Linux Mint, since it's known to be friendly to new users, and I like the software installer on it. I installed Linux Mint in the past in VirtualBox, and the latest version also installed fine, and I found installation instructions explaining how to provide my own partitions, but the installation failed during the "configuring hardware" stage. If you're interested, more details are available in this thread on the Linux Mint forums. I didn't get any reply to that thread.
I thought then that I'd try openSUSE 11.3. The live CD looked usable enough, but when I tried to install I couldn't tell how to make sure that I don't get a boot manager which will try to give me access to the Windows versions on the disks. I don't want this, and what I'm really afraid of is that an install will screw the booting of Vista x64 on the other disk (which, granted, I can disconnect for the install, but I'd rather not). At that point I decided to post a question here.So hopefully you understand what I want to achieve. I don't much care which Linux distro I install, but I'd rather have one which gives me as much usability out of the box (or easily installable) as possible.
View 5 Replies
View Related
May 5, 2010
Saw a reference to putting the swap partition on a separate drive--just minutes after I was considering that approach. Can't find anything recent on the topic, so asking: Is there an advantage to having /swap on a separate HD from data on /home? My thought was that both disks could be active at once, perhaps speeding up a busy application.
View 1 Replies
View Related
Mar 29, 2011
I have a dual boot computer with slackware_64 13.1 and windows.
I have a 120G ide hard drive that I need to add to my computer.
Adding this hard drive changes the drive device id's and slackware won't boot.
as installed, my drives look like this:
When I add the extra hard drive, it looks like this:
I know there is a way to make an initrid and to use the uuid identifications for the drives, and even use labels instead of the long uuid's, but I'm unfamiliar with this process, so I was hoping somebody that's done this before might point me in the right direction.
View 11 Replies
View Related
May 18, 2010
The hardware is a psystar box with 2 drives for os x and ubuntu respectively. I attempted install of ubuntu over older version of xubunut without physically disconnecting the os x drive After install I could not boot into either system. THEN I remembered something about the install problem that 10.4 has and installed ubuntu again, this time following the instruction regarding booloader install. Now I can boot ubunut fine, but of course when I select drive holing os x it hangs on 'Verifying DMI pool data....' I've been looking at some thread on here about dual boot problems with Win7 and such, but are any of the recommended diagnostic and repair steps relevant to my case, specifically testdisk and bootinfo scripts?
View 1 Replies
View Related
Jun 24, 2010
I have two SATA hard drives in my slackware 13.1_64 Desktop.
On 1. Drive I have 3 partitions for Win 7:
/dev/sda1 - Some Win 7 boot partition
/dev/sda2 - Win7
[code]....
View 9 Replies
View Related
Aug 16, 2009
install fedora 11 on Vista I want to keep the windows boot loader and also install on a usb drive or a seperate partition that has 10GB free "install doesn't see partition's". Recently I installed ubuntu and had a major problem with booting, without having the usb drive connected I couldn't boot windows so uninstalled it. I'm trying to install now but install does'nt give me any option to select partitions from my drives one 320GB "portable, 3 partitions" and 80GB "main os 2 partitions one partition has 10GB free"
View 3 Replies
View Related
Jun 30, 2011
Can Slackware 13.37 boot from a USB 320gb hard drive?
View 5 Replies
View Related
Aug 25, 2010
At first I thought it was the daily cron jobs, but it's been at it for like 3 or 4 hours. It's driving me crazy locking up my system. I suppose I should get off the computer anyway, no real reason to be on for so long.
The only things that look weird in system monitor is kwin, virtuoso-t and X seems to be higher CPU usage than it should. And CPU usage is 20-50% when I'm not doing anything. It was indexing my files.
View 2 Replies
View Related
May 17, 2011
Currently I'm running a smaba on slackware 13.1 with a 1TB Hard drive for dumpng files rather than sharing. My partition table is as follows:
#####################################################################
/dev/sdb2 swap swap defaults 0 0
/dev/sdb1 / ext4 defaults 1 1
/dev/sdb3 /home ext4 defaults 1 2
[code]....
Now that i need to add 2 more 1TB hard drives and I want to stripe these two drives to make one partition for large space.
View 4 Replies
View Related
Nov 29, 2009
Just installed Slackware 13 this morning. It's been a long time since I last tried Linux, but Slack works (a lot easier than Slack 8 did back when I last used it!) quite well. I'm using the XFCE desktop and it's smooth as silk except for one odd problem-I cannot get any of my USB drives to mount. I just plugged in my Lexar 4GB USB flash drive and received an error message. Here's from /var/log/messages from when I initally plugged in the drive (I have a 500GB WD MyBook USB external drive that is always plugged in):
Any ideas or suggestions of what to look at? I'm not familiar with HAL in Linux although I've seen plenty of discussion about it and have an idea of what it's supposed to (or break! ).
View 1 Replies
View Related
Jul 19, 2011
Long time Slack user, thought I would try to update my old laptop (Toshiba Satellite with AMD K6-2 333 MHz, 128 MB RAM, 40 GB hard drive) from 10.2 to 13.37 in celebration of the newest version :-)
By update, I mean a complete wipe and reinstall, just to be clear.
So 10.2 runs well, everything looks shiny (XFCE of course) but when I try to install 13.37 I run into trouble. I figured out to boot with huge.s instead of hugesmp.s, but when I try to run 'setup' I get an error that says I have no partitions. mkay, I try fdisk (or cfdisk), but I get literally NO response - no error, no nothing but a return to the command promt. It is exactly as if fdisk does not recognize there is a hard drive there at all.
I boot back into 10.2,check the BIOS, everything looks fine, I have a drive mounted at /dev/hda1, swap at /dev/hda3. Are there some additional parameters I should be booting with? Does it matter that the hard drive is ATA?
View 11 Replies
View Related
Apr 22, 2010
I have Slackware 12.2 installed on my computer, as well as a Windows Xp. I have a hard drive named '/fat-d', which is formatted to be 'fat' and is normally used under XP. This drive can also be accessed under Slackware, both as root and the normal user.I can not write to the directory '/fat-d' when I am not root, it is normal since 'ls -l' shows that its owner is root and other users have no permission to write. The problem is that, when I tried (as root) to change the owner to the normal user:# chown [normal_user_name] /fat-dI got an error: chown: changing ownership of '/fat-d/':Operation not permittedBut how can the root have no permission to change the owner?
View 6 Replies
View Related
Oct 1, 2010
I just lost over 300gb of files due to my external hard drive crashing.There was an error with the files system.I tried formatting on Slackware but cfdisk didn't work for me.I'm looking for something much easier with a GUI or something similar to the Disk Utility that you get in Ubuntu.And also which format do I format my external harddrive to?Something even more stable than ext4 or ntfs? Cause I do not want my external hard drive to crash again.
View 7 Replies
View Related
Mar 25, 2010
I just partitioned and installed slack on a 1TB hard drive. I then run KDiskFree under KDE, and saw that I am missing about 300Gig! Is it just a simple thing between bytes and bits like MS. Or is this an issue I can not ignore? I have 3 partitions. One is my swap, one is ext4(slackware is on) the last is a jfs partition.
View 7 Replies
View Related
Mar 12, 2011
I have a desire to boot Tripel windows7 arch and Slackware but unsure how to partison my hard drive??
View 5 Replies
View Related
Jun 29, 2011
how to on enable ling separate X sessions with dual monitors in slackware? In rhel all I have to do is enable it under the nvidia-settings... In slackware it does not work that well... to what I understand you have to configure a separate x session...
View 11 Replies
View Related
Jan 25, 2010
I got a dell inspiron 1501 laptop with a 80Gb sata drive what is the best solution to add data storage space for someone that love to have multiples operating systems at hand Note: I use mostly linux so I won't need to change my laptop for many years maybe ...
View 2 Replies
View Related
