Ubuntu Networking :: Gvfs-mount Doesn't Work Through Ssh?
Jan 26, 2010
setup consist of three machines: 2 servers (A and B)(ubuntu) and my local laptop Server A is a company controlled server which holds project data Server B is our office local server, which we use for development purposes. The problem occurs when i ssh from my local laptop to server B. After loggin in, i execute a script to transfer data from A to B. This script mounts server A using gvfs-mount. It fails to mount completely and gives me the following error
Code:
Error mounting location: volume doesn't implement mount
However if i log onto server B, using the servers keyboard and monitor (using a gnome session) i can execute the line. To verify that it's something related to the ssh login, i tried the following: (My local laptop is also running ubuntu) from laptop open a terminal. See the gvfs mount work as expected. open another terminal and ssh localhost tried to execute gvfs-mount from the local ssh session and i get the above mentioned error. After googling a bit, i found that it might related to dbus (which i know _nothing_ about) and i tried
Code:
dbus-launch gvfs-mount and then tried to gvfs-mount server A, but it fails again.
View 9 Replies
ADVERTISEMENT
Jun 4, 2011
I have the gvfs-fuse package installed, and if I understand it correctly it should make GVFS mounts appear in ~/.gvfs.
However it doesn't, when I mount something with GVFS (e.g. my Canon digital camera using PTP), I can only access the files from Nautilus, not from command line.
I have a ~/.gvfs directory, but it remains empty.
View 2 Replies
View Related
Dec 14, 2010
I have a samba based domain controller which has a share with limited privileges for different usernames. When I log in the gvfs wizard in ubuntu everything is all good and I can access all the files I am supposed to be able to.
I suspect it has to do with the owner and group of the directory not being a user in the local machine. When mounted via gvfs the owner and group are the local user and group whereas when mounted via the mount command the user and group are foreign uids and gids.I had thought that gvfs would have relied on mount() system call under the bonnet but is this not the case as gvfs mounts don't appear in the list when you type 'mount'.Can this be solved in the standard smbfs mount or is gvfs simply a better implementation that does some magic behind the scenes to set the owner and groups in accordance with the smb protocol?
View 1 Replies
View Related
Nov 27, 2010
I installed 10.10 yesterday and all seemed fine. Now I made an NFS mount in /etc/fstab like I use to in 10.04
Kaapstad:/admin /mnt/Kaapstadadmin nfs defaults 0 0
but get this:
# mount -a
mount: wrong fs type, bad option, bad superblock on Kaapstad:/admin,
missing codepage or helper program, or other error
(for several filesystems (e.g. nfs, cifs) you might
[Code]....
In /mnt, /etc/hosts everything is set as should be. In other posts I'm reading other problems with nfs as well. Is there a bug?
View 2 Replies
View Related
May 29, 2010
I installed ifuse (a utility to mount your iPhone or iPod touch via the USB cable) and I want this to be the default way my iPhone is mounted when I connect it. Currently, when I connect it, it gets mounted by the gvfs (Gnome virtual file system) at ~/.gvfs/iPhone. Either one change should be made (the 'default command to execute when this device is connected') or two changes (tell gvfs not to mount, and tell ifuse to automount). I don't know how I can get this to work.
View 5 Replies
View Related
Jul 1, 2010
-Lucid Lynx
-Likewise-open to connect to an AD
-add all network shares to the nautilus favourite places
-our script is working fine if you are running the script manually from an opened session
-it's not working when placed in /etc/profile.d
What the script is doing:
-reading the .bat script name from the AD using the user login
-mounting the netlogon share
-reading the content of the netlogon script
-finding the network share names and adding them to the nautilus favourite places
What is failing: it does not mount the netlogon share using gvfs-mount Maybe because it's run too early in the process? note that a new user may log in any time, and we want this to be entirely automatic. So we cannot put the script in /home/login/*, as the home is not created yet at first login.
View 6 Replies
View Related
Jul 7, 2009
When I use nautilus open my home directory, everything is OK except that the file contents in the home directory are not presented. It seems that nautilus is still waiting and busy.
After that, I try to enter the user's home directory by the Terminal and succeed. I can use 'ls' to display the file in the home directory, But when I use 'ls -a' to print the hiden files, again the Terminal seem to be lock. the 'ls -a' is locked, I fail to 'kill' it.
At last, I find that everything that connects to the behavior which need to enter, delete or just dsplay the /home/$USER/.gvfs will fail and lock, and without any error message.
View 3 Replies
View Related
Mar 22, 2010
Recently upgraded to F12. K3B can't burn DVDs. Drive was working fine in Fedora 10 before the upgrade, and I've applied all updates.
Here is the output when run from console:
Code:
lsof: WARNING: can't stat() fuse.gvfs-fuse-daemon file system /home/SlowCoder/.gvfs
Output information may be incomplete.
(K3bDevice::HalConnection) unlock queued for /org/freedesktop/Hal/devices/storage_model_DVD__RW_GA10N
First sec data area: 43:41:33 (LBA 196608) (402653184
[code]....
View 5 Replies
View Related
Feb 2, 2016
On my debian jessie "testing" I have set in fstab some line to mount folder located on my pc server...
When pc boot up the error is
Code:
Select allFailed to mount /mnt/Web
See 'systemctl status mnt-web.mount' for details...
CIFS VFS: cifs_mount failed w/return code = -101
Then, after logging in, if I run mount -a all works correctly...
Maybe error was LAN that is not started? In this case how to resolve?
View 11 Replies
View Related
Aug 31, 2010
I have a hard time mounting two external drives on my Suse 11.3. When I use the device notifier gadget both drives get mounted in /media/<drive name>, the vfat drive is read-only though. However, I would like to mount both drives under /<drive name> in separate directories and rw. I looked at the devices in /dev/ and entered the device name to fstab, set the mount point, file system (vfat, and ntfs-3g) and set 'rw,noauto,exec,user,sync 0 0'.
This way I could mount my vfat drive read-only under /<drive name>, but not the ntfs one. After a reboot i noticed that the external drives get different IDs in /dev. E.g. what I had in my fstab under /dev/sdc1 got /dev/sdf1, and /dev/sdc was unknown. I am doing something wrong here, what worked in 11.0 does not seem to work here.
[code]...
View 2 Replies
View Related
Sep 28, 2010
Using Fedore 12 I am trying to mount on a server with the following command: # mount -t cifs //samba-pool-suse/pool-suse /mnt -o user=xxxx I was waiting that the system askme the user password and thats all, but the answer is: mount: wrong fs type, bad option, bad superblock on //samba-pool-suse/pool-suse, missing codepage or helper program, or other error (for several filesystems (e.g. nfs, cifs) you might need a /sbin/mount.<type> helper program) In some cases useful info is found in syslog - try dmesg | tail or so using:# dmesg | tail returs: CIFS VFS: cifs_mount failed w/return code = -22
View 3 Replies
View Related
Apr 23, 2009
I have this annoying problem since day one.I am testing out Red Hat RHEL5, everything is fine except DNS look up.If I ping www.google.com, it doesn't work, ping ip address it all works;if I bring up browser, put www.google.com it doesn't work, can't find the name, however, simply put ip address there it works.My DNS seeting seems ok, and the DNS works from Windows box.
View 2 Replies
View Related
Jul 14, 2010
I have a usb 1tb drive that I want to share over my netowork, but when i share it through nautilus, it doesn't mount right on other computers, ect. Is there a way to mount it. The location of the drive is /media/FreeAgent Drive___
View 3 Replies
View Related
Jan 28, 2011
Hi Linux Forum People! This is my first post. Somehow I'm not able to mount directories from other machine using autofs. Autofs maps successfully loaded into NIS client, but autofs does not recognize them. Please see belowI'm running RHEL4
[root@linux2 etc]# ypcat -k auto.master
/hs /etc/auto.hs
/home /etc/auto.home
[code]...
View 19 Replies
View Related
Sep 25, 2010
I have the following problem: There are three NFS mounts in /etc/fstab, which are automatically mounted. The network connection runs over NetworkManager. Since NWM brings up the network asynchronously, NFS doesn't mount correctly on the first try, but is loaded soon enough since mount automatically retries until it works.
I can live with the fact that I have an error in my boot messages, since everything is up in time for the user. But, I need a (selfmade) upstart script which depends on the NFS mount being up. Even using "remote-filesystems" as the trigger doesn't help, because the trigger is apparently sent after the first failed try (I checked with cat /proc/mounts in my script, the nfs mounts are clearly not up.) Can I somehow force the remote mounts to wait until NWM is up, or make the NFS mount emit an event when the mounts really get mounted?
View 6 Replies
View Related
Jan 23, 2010
I have a bunch of nfs mounts from my MythTV backend to my netbook, both running 9.10. Due to the lousy Atheros wireless driver, it typically loses connection at least every half hour. The nfs mounts are mounted soft,intr, so programs should get an error trying to talk to a server they can't contact, and the request should be interruptable. Instead, they just lock up, can't be interrupted, and the netbook can't even shut down after the network failure because it hangs trying to clean up before shutting down.
So do these nfs options actually work in Ubuntu? 'mount' shows the nfs directory mounted with the correct options, so it doesn't seem to be any kind of configuration problem... it just doesn't do what I'm telling it to do.
View 2 Replies
View Related
Nov 29, 2008
I have a script which runs a few other scripts (in subfolders of the first script) in order to mount some unix/linux shares) Anyway, when I run the file from rc.local and try to pipe the output into a file the file is empty and the shares are not mounted. however when I run the file it mounts everything.... Also, the script doesn't work on my wireless clients...
View 1 Replies
View Related
Jun 9, 2010
I have recently installed ubuntu 10.04. After some days of trying I can say that ekiga doesn't work with 10.04. With the same computer I was perfectly able to use ekiga with ubuntu 8.1, the 10.04 gives me connections problems.... it simply say says "Could not register (Failed)".I'm trying to connect with my voip provider (12voip.com) but it seems that I can't. I have even tried other programs like empathy, Twinkle, QuteCom but with none of them I can connect with my voIP provider. I think there are some connection problems but I really don't know how to face them. We have to configure router in 10.04 for sip connection? Actually I can't phone at all.
View 4 Replies
View Related
Jul 27, 2010
I've tried to use netcat in the past and assumed it was my stupidity that was preventing it from working... but this is getting ridiculous. I'll execute nc -l 3333 on a server at 192.168.0.105 (after opening it on the firewall of course) then I run nc 192.168.0.105 3333 on my laptop (from 192.168.0.101). and nothing happens... i start typing and nothing comes up on the terminal.
I run nc -z 192.168.0.105 80 which should ideally do a port scan of port 80 on that server (of which I'm running a web server that clearly works) but it doesnt even give me any feedback. Nothing happens. Now when I use the verbose flag i see that I am indeed connecting to the specified port on the server successfully (so the port scan one is a success but only with the verbose flag... which shouldnt be the case I believe). But still once I have the server listening and the laptop connected... I type in both windows and nothing happens...
View 1 Replies
View Related
Aug 30, 2010
I have JVJ 3G modem,one from Singapore. I have try out as [URL]... But it doesn't work. Has anyone try it before?
View 4 Replies
View Related
Aug 31, 2010
I am networked to a Windows machine. I can see and open files across the network. I can see and add my HP 6000 printer (it is on the Windows machine). On my Ubuntu machine this printer has a check mark by "Enabled" and "shared" but I cannot set it as default (that option is ghosted) and when I try to print a test page it says "unable to connect to CIFS host" I downloaded the HP Linux setup program. That program cannot locate the networked printer at all.
View 7 Replies
View Related
Nov 15, 2010
I'm running Ubuntu 10.04 on my laptop. Up until about a week ago, my wireless worked fine, but now it rarely connects. Sometimes the connection indicator shows that I am connected, but when I click on it it doesn't show any active networks. Even when I use a wired connection it doesn't always work.
View 3 Replies
View Related
Dec 22, 2010
i have had my bluetooth keyboard and mouse working fine for a little while now, then one day.. seemingly out of the blue (no pun intended) it stopped. heres what i deduced:
Mouse works fine, always keyboard doesnt.
I'm using a logitech dinovo edge
and i can manually force the keyboard to connect by putting the keyboard into discoverable mode (press the button on the back of it) and using hidd:
Code:
hidd --connect XX-XX-XX-XX-XX-XX
but who the heck wants to do that on every reboot or resume from sleep! yikes..
firstly, i noticed that bluetoothd was segfaulting alot:
Code:
ec 22 17:26:09 hostname kernel: [21329.811149] usb 2-6.2: new full speed USB device using ohci_hcd and address 6
[Code]....
View 1 Replies
View Related
Jun 15, 2011
i've installed it on my parents old computer, mostly for downloading. But wired internet did work all the time but then i had to reset our router because of some problems and now it doesn't work anymore! But the strange thing is, if i put the cable on my own laptop with windows on it, then it works as normal.
So i guess its some kind of DNS problem, but i'm very new with ubuntu and also not so good with computers. Our network is simple just an modem connected to an router: Sitecome WL-341.
View 4 Replies
View Related
Aug 25, 2009
Networking on Fedora 11 doesn't work for me on various machines. Fedora 10 does, but only if you don't do an update.Why does Fedora get worse the more you keep it up-to-date?
View 1 Replies
View Related
Jan 4, 2010
I just upgraded from 9.04 to 9.10. When I restarted, I admired the new login menu, then went to Firefox. I noticed that my wireless didn't work (it did in 9.04) Thinking I'd just need to reinstall the drivers, I plugged in the computer to a working Ethernet outlet with a working cord. I noticed that Ubuntu didn't tell me that Auto eth0 was connected. It didn't tell me anything. And then I went to Google and realized that the wired connection didn't work either. Then I came here on an iPod Touch and you know the rest.
Edit: And other devices work too on the network.
View 2 Replies
View Related
Jan 10, 2010
I really want to convert over to ubuntu and use ubuntu netbook remix on my new netbook but I've had a hell of a time trying to get it to access the internet, I've tried installing drivers but I don't really know how.
My Netbook Details:
MSI U130
1.66 Intel Atom N450
1GB DDR2 Ram
Windows 7 Starter
802.11 bgn 1r1t Mini Card Wireless Adapter
View 3 Replies
View Related
Feb 21, 2010
On my HP TX2500 laptop, dual-booting Vista and 9.04, Ubuntu installation found the WLAN and it works fine.I installed VirtualBox with Vista as the host and 9.04 as the guest. Wired Ethernet works fine but it didn't seem to find my WLAN. What more do I need to do?
View 1 Replies
View Related
Feb 26, 2010
I try to do wireless man-in-the middle attack with my ASUS laptop and I've alreay got two wlan adaptors, a built-in Atheros NE-785H and a TP-LINK TL-W322G USB wireless adaptor. Either of them is to act as a rogue access point (soft AP). The biult-in adaptor works well but I just can't get the TP-LINK working properly.
I have alreay visited the threads below No Wireless with TP-LINK TL-WN322G found Problems with a TP-LINK TL-WN322G 54g Wireless USB Adapter (ZyDAS zd1211b Chipset ) HardwareSupportComponentsWirelessNetworkCardsTP-Link tp-link WN322G Wlan mit TP-LINK TL-WN322G
I'm running Karmic with 2.6.31-19, according to the Ubuntu help page it should work out of the box, but it just wouldn't work for me. I only got it working with ndiswrapper, which is clearly not what I want to use since it's not supported by aircrack-ng.
Here are results after running modprobe -v zd1211rw
Code:
WARNING: All config files need .conf: /etc/modprobe.d/ndiswrapper, it will be ignored in a future release.
insmod /lib/modules/2.6.31-19-generic/updates/cw/zd1211rw.ko
then lsmod | grep zd
[Code].....
View 6 Replies
View Related
Mar 10, 2010
I have a desktop pc with xubuntu 9.10 32bit installed. I don't have direct access to this machine, but they told me that internet is not working (firefox, synaptic,etc...), but only skype works! If they reboot on windows, everything works well, so it's not a matter of connection or dns.It's very important because they work with that computer. How can i solve the problem? and what could be the cause of this strange anomaly
View 3 Replies
View Related
