As stated , gvfs is extremely slow when browsing smb shares.Mount cifs runs in a third of the time gvfs takes.Often gvfs hangs up while listing.I've searched and see tons of noise about it but no real signal.Does anyone here have any info on gvfs as to why it's so slow browsing?"Name : gvfsArch : x86_64Version : 1.6.2"
View 1 RepliesWhen I use nautilus open my home directory, everything is OK except that the file contents in the home directory are not presented. It seems that nautilus is still waiting and busy.
After that, I try to enter the user's home directory by the Terminal and succeed. I can use 'ls' to display the file in the home directory, But when I use 'ls -a' to print the hiden files, again the Terminal seem to be lock. the 'ls -a' is locked, I fail to 'kill' it.
At last, I find that everything that connects to the behavior which need to enter, delete or just dsplay the /home/$USER/.gvfs will fail and lock, and without any error message.
Recently upgraded to F12. K3B can't burn DVDs. Drive was working fine in Fedora 10 before the upgrade, and I've applied all updates.
Here is the output when run from console:
Code:
lsof: WARNING: can't stat() fuse.gvfs-fuse-daemon file system /home/SlowCoder/.gvfs
Output information may be incomplete.
(K3bDevice::HalConnection) unlock queued for /org/freedesktop/Hal/devices/storage_model_DVD__RW_GA10N
First sec data area: 43:41:33 (LBA 196608) (402653184
[code]....
1.crash & warning showed as soon as dekstop was prepare ( note that i had not even installed f14...i was about too but this error drive me crazy and make me confuse ? )alright i got that , here is all u need ...gnome disk utility 2.32.0-1fc14reson process/usr/libexec/gdu-notification deamon was killed by signal 6(SIGABRT)crash count :11.crash & warning showed as soon as dekstop was preparegvfs crash 1.6.4-2,fc14reason process/usr/libexec/gvfs-gdu-volume monitor was killed by signal 6(sigabrt_crash count :2so now tell wheather i should install f14 frm this cd or make another ?
View 1 Replies View RelatedI just converted to Fedora from Ubuntu and I have some questions:
1. How can I install nvidia driver? There is no 'jockey-gtk' in my fedora :3 (video card is nvidia 7200GS)
2. whats the equivalent for 'ubuntu-restricted-extras' in fedora? (ubuntu-restricted-extras is a package for A/V codecs, Java, microsoft fonts and Flash plugin)
3. I just move data from other hard disk to the fedora ones and now all the folders are locked (lock icon).
I try with:
su
chown -R fedora:fedora /home/fedora
but the permissions are denied for gvfs.
Firefox opens file listing instead of Nautilus opening file listing.When I access a folder via "Places" -> "Home Folder" or "Places" -> "Downloads", Firefox opens and list the contents of the directory.I have re-installed Nautilus, un-installed Firefox and then going to "Places" -> "Home Folder" or "Places" -> "Downloads" launches Nautilus and I can view the contents normally. Anybody else had this problem with Firefox ? Anybody know how to fix this Firefox problem ?Running Ubuntu Desktop 9.10 64bit.
View 2 Replies View Relatedafter update f12 to f13 geany stopped to work correctly on remote storage (sftp). Geany opens file correctly, but when I try to save, it saves empty file. I tried "notepad" and "gedit", they work good on f13. Geany on f12 worked correctly too.
View 3 Replies View RelatedI installed Fedora 12 x64. Now everytime I start my Linux the .gvfs directory in my /home/Razorblade -dir is corrupted. So I have to reboot and start an Linux LiveCD, mount my home partition and delete this folder. After that I can login normally. Symptoms: I am able to login normally, start a browser, start my mail client, list the contents of subfolders of /home/Razorblade/... - everything fine. But as soon as I want to list the contents of my /home/Razorblade folder - nothing but this turning blue thing around the curser. The command line does nothing after "ll /home/Razorblade", sometimes even crashes and closes. As root I am able to do "ll /home/Razorblade" And this is what I get:
[Code]....
Is the command "ls -d" meant for only listing directories? Because i tried it and it ALWAYS display just a blue dot. If not what is the correct way to show only directories? I.e. MSDOS equivalent "dir /ad".
View 2 Replies View RelatedI have want to list sub-directories with spaces but am facing the following problem:
My subdirectories are:
FirstDirectory
Directory with spaces
if I use
Code:
for directory in "`find . -type d`"
[Code]...
I've plugged a usb stick into my server.
cat /proc/partitions
8 0 1981440 sda
8 1 990720 sda1
8 2 436288 sda2
However when I do:
ls /dev/sd*
/dev/sda
/dev/sda1
/dev/sda2
/dev/sdb
/dev/sdb1
/dev/sda2
I'm sure I got no other devices connected that /dev/sdb would point to
cd /sys/block/sda
[root@footy sda]# ll
lrwxrwxrwx 1 root root 0 Jul 18 16:27 device ->
../../devices/pci0000:00/0000:00:03.2/usb1/1-1/1-1:1.0/host0/target0:0:0/0:0:0:0
[root@footy sda]# cd /sys/block/sdb
[root@footy sdb]# ll
lrwxrwxrwx 1 root root 0 Jul 18 16:27 device ->
../../devices/pci0000:00/0000:00:03.2/usb1/1-1/1-1:1.0/host0/target0:0:0/0:0:0:1
What does this imply, sdb linked to sda?
How do I find the complete specification listing for my RAM? I am getting ready to order another card--need to know what to order.
View 3 Replies View RelatedWithin the mv() command is there any way to not need to type the entire directory location? In the example there are directories with varying depths... I want to move a file from depth 2 to a directory of depth 3 when the directory of depth 3 is within the directory of depth 2. Basically, can I cp() andor mv() a file to a subdirectory without having the enter the entire directory location?
Code:
[root@xxx dir]# ls
dirD1
[root@xxx dir]# cd dirD1/dirD2
[root@xxx dirD2]# ls
[code]....
I am preparing for RHCE. While doing the lab I renamed /etc/grub/grub.conf as grub1.conf. Now (obviously) system boots on grub> prompt. Can I recover without using a bootable CD? Another problem that I encountered was, while doing lab for fdisk, I used command umount -al. Now, fdisk -l is not listing the partitions but giving a message:- /proc/partitions does not exist. If I reboot the system this is restored.
View 1 Replies View RelatedDoes anyone know of a script / program that will give me a listing of all the content on my hard drive(s)? I have two drives that I keep my content on (which is re-downloadable if I lose a drive). In the event that I lose a drive, I would like to have a list that I can refer to so I know what I need to re-download again.
It would be good if it doesn't list *every* file but maybe only the relevant folders and files. For example, many folders are extracted archives of 100's of files. If it just gave me the folder name that would be better than all the files (less stuff to sift through).
I have this:
Code:
root@MyDesktop:/home/username# ls -lisa
ls: cannot access .gvfs: Permission denied
[code]....
I've been using ubuntu earlier and when connecting to a samba shared folder it appeared in /home/user/.gvfs folder. I can browse the samba share, it's ok, but I prefer Midnight Commander than Nautilus when copying files. So, where does it reside in Debian?
View 7 Replies View RelatedI have a Debian testing box with Xfce (no Gnome, no Nautilus). It has all gvfs-related stuff installed, including all backends and fuse interface. But any attempts to gvfs-mount anything (like sftp://... or smb://...) fail with error opening file: Operation not supported, and gigolo shows only 'unix device (file)' in the list of supported protocols.My ~/.gvfs has rwx permissions, and I'm a member of fuse group; other fuse-related stuff works for me.
View 1 Replies View RelatedI loved Gnome's Nautilus and FTP integration and being able to mount a remote FTP directory as a regular bookmark/directory, and double clicking any remote files to open in any unmodified program. I also loved editing text files with GVim.
However, if I double clicked file on Nautilus to open a text file in Gvim, then saving a file will take about 10 seconds and GVim will hang for that amount of time. The major irritant is that I cannot continue editing while the text editor is waiting for the write to finish, this delay interrupted my workflow and thought process and saving becomes a painful process. The other problem is that I don't think simply uploading a file should take that much time.
I'm aware of GVim's internal FTP support, but they are not as well integrated with Nautilus's FTP and it suffers from the same problem.
So a few question:
Is there a way to make GVim or GVFS to save in background while I continue editing?
Why is GVFS so slow? Is there any way to set GVFS to use a single persistent FTP connection instead of creating a new FTP connection each time?
I'm on Gentoo Linux x86-64.
When I plug in my digital camera, it mounts it as a gvfs-mount. I have a few problems with this:
- It takes 2 times: I have to plug it in, wait, unplug it, plug it back in before it shows on the desktop
- Don't have command line access: Nothing in ~/gvfs after mount and I cant do anything with gphoto2://[usb....]
- Cant access it from another desktop instance: gvfs-mount -l lists it when I'm on a terminal on the desktop, but not when I'm ssh'ed into the system.
Really I just want to mount, rsync photos for backup, unmount and be done with it (all this in 3 lines of a shell script that I'll add to udev so its fired when ever the camera is plugged in)
dmesg: usb 1-5: new high speed USB device using ehci_hd and address 8. Configuration #1 chosen from 1 choice
lsusb: Bus 001 Device 008: ID 04a9:3176 Canon, Inc. PowerShot A590
How can I mount it as a normal mount (perhaps something that automatically shows up in /media or something).
I installed ifuse (a utility to mount your iPhone or iPod touch via the USB cable) and I want this to be the default way my iPhone is mounted when I connect it. Currently, when I connect it, it gets mounted by the gvfs (Gnome virtual file system) at ~/.gvfs/iPhone. Either one change should be made (the 'default command to execute when this device is connected') or two changes (tell gvfs not to mount, and tell ifuse to automount). I don't know how I can get this to work.
View 5 Replies View Related-Lucid Lynx
-Likewise-open to connect to an AD
-add all network shares to the nautilus favourite places
-our script is working fine if you are running the script manually from an opened session
-it's not working when placed in /etc/profile.d
What the script is doing:
-reading the .bat script name from the AD using the user login
-mounting the netlogon share
-reading the content of the netlogon script
-finding the network share names and adding them to the nautilus favourite places
What is failing: it does not mount the netlogon share using gvfs-mount Maybe because it's run too early in the process? note that a new user may log in any time, and we want this to be entirely automatic. So we cannot put the script in /home/login/*, as the home is not created yet at first login.
I have the gvfs-fuse package installed, and if I understand it correctly it should make GVFS mounts appear in ~/.gvfs.
However it doesn't, when I mount something with GVFS (e.g. my Canon digital camera using PTP), I can only access the files from Nautilus, not from command line.
I have a ~/.gvfs directory, but it remains empty.
I have a problem that I'm not sure how best to debug. About every other time when I boot my system, I get a condition where listing the files in /root locks up that xterm session.This can be cleared by opening another xterm window and killing the listing command. This happens on "ls -a", "find", "tar" and I think "stat" also. The locked up xterm echo's chararcters but does not respond to any control sequences. This is new with FC11.This has only been seen to happen for root. And once a system is booted with this problem it seems to persist until you get it booted without the problem.
View 8 Replies View RelatedHow do I stop gvfs-afc-volume from running on my computer? What exactly is it?
My system:
CPU: AMD Sempron(tm) Processor 3100+
RAM: 1.4 GiB
Linux 2.6.34.10-0.2-default i686
openSUSE 11.3 (i586)
(KDE 4.4.4
setup consist of three machines: 2 servers (A and B)(ubuntu) and my local laptop Server A is a company controlled server which holds project data Server B is our office local server, which we use for development purposes. The problem occurs when i ssh from my local laptop to server B. After loggin in, i execute a script to transfer data from A to B. This script mounts server A using gvfs-mount. It fails to mount completely and gives me the following error
Code:
Error mounting location: volume doesn't implement mount
However if i log onto server B, using the servers keyboard and monitor (using a gnome session) i can execute the line. To verify that it's something related to the ssh login, i tried the following: (My local laptop is also running ubuntu) from laptop open a terminal. See the gvfs mount work as expected. open another terminal and ssh localhost tried to execute gvfs-mount from the local ssh session and i get the above mentioned error. After googling a bit, i found that it might related to dbus (which i know _nothing_ about) and i tried
Code:
dbus-launch gvfs-mount and then tried to gvfs-mount server A, but it fails again.
I am having a problem with a script I am developing to restore a profile from a snapshot. It is part of a deployment strategy for patron computers at our county library. Every night I run the script to restore the "guest" account from a a preset snapshot. Basically this is what the script does:
1 Kill the guest login session if logged in
2 Copy Firefox places.sqlite to backup # preserve for audit trail
3 Remove /.backup/guest.Backup # previous CYA copy of guest account
4 Move /home/guest to /.backup/guest.Backup # New CYA backup of guest
5 Un tar snapshot of guest to /home/guest
6 Copy saved Firefox places.sqlite from step 2 to guest account
The problem I am having is I am getting an error:
rm: cannot remove `/.backup/guest.Backup/.gvfs': Is a directory
What is the best approach here. I wouldn't think killing the gvfs-fuse-daemon is the solution. I think I just want to temporarily disable it to the restore and prevent the error being generated. I want to get this script ironed out, because I want to deploy this on about 15 workstations.
Looking at the processes running I have:
21575 ? S 0:00 /usr/lib/gvfs/gvfsd
21576 ? S 0:00 /usr/lib/gvfs/gvfs-gdu-volume-monitor
21580 ? S 0:00 /usr/lib/gvfs/gvfs-gphoto2-volume-monitor
[code]....
I recently upgraded to Squeeze and in general I'm loving it.One problem I'm having is that I can no longer open remote files via SCP/SSH using GVFS from Geany.This functionality still works in gedit.I've checked the syslog and can see no clues, and I also can't find any references on Google.
View 5 Replies View RelatedI have a UUID file that has grown to 8.4 gigs... and I don't know what to do. Its sucking up all the free space in the partition. I guess I will have to delete the file but I don't know how to do it properly.I suspect this is a backup of all the data I have been moving around between drives recently.
View 2 Replies View Related