My laptop freezes when I boot it after a hibernate. The ubuntu logo shows and then there's a text that says "trying to resume from /dev/disk/by-uuid/8879ds7e-f2e1 (then it continues with a lot of numbers and slashes)" And then nothing happens.
View 3 Replies
I have encoutered a problem I selected Hibernate which Laptop did, Then I could not get it to start again, I hard Shutdown then restart It then just sits at Grub page when I hit enter to enter system it then loads to a black screen with blinking cursor. I have tried all other options recovery + 2 other earlier kernals all Kernals give same response.
View 4 Replies View RelatedI installed ubuntu 10.10 and ever since then every now and then when i boot up the computer will just freeze. someone told me that it is because my comp is old and that i need to try an older version
View 3 Replies View RelatedI just installed the ubuntu 10.10 along with a dual boot of win7 and running toshiba m511, the problem is when I am using ubuntu I cant sleep, all I get is a black screen and then nada, the fans still on etc etc, I cant push any buttons and have to hard reset it, for it to start working again.
View 4 Replies View RelatedI just installed the ubuntu 10.10 as a dual boot with windows xp. I have a problem of the computer getting stuck, freezing so the mouse nor the keyboard respond. This usually happens when I open multiple tabs on mozilla Firefox...
View 5 Replies View RelatedI've re-partitioned my existing windows xp disk to do a dual boot with Ubuntu 10.04 Lucid. The installation went fine and I am able to use both the operating systems just fine.
But when I boot into windows xp I donot have the hibernte/sleep options available anymore.
debug the issue and get back those options ?
Note: I have made the windows as default boot option in grub.
I had a dual boot umbutu 9.04 & xp Toshiba laptop satellite A15-S1292, (old bad battery). I use it mostly in linux but had been working in Windows, it may have hibernated and the next boot may have been to Linux. Now it boots straight into Ubuntu login screen that looks like it is may be returning from hibernate (don't use it normally). On boot don't see the normal BIOS announcement or screen allowing the selection of boot device. Doesn't boot Live CD from CD Rom or Suber Grub CD. When I examined the Windows mount receive warning that it could not be mounted as it was hibernated. I followed the suggested mount -t -ntfs -3g -o remove_hyberfile /dev/sda1 and can now access the windows partition. Boots still return to the same linux login screen. Don't seem to be able to boot from anything else.
View 1 Replies View RelatedI am having problems with freezing, hanging, blackouts and being unable to boot with 10.4. After having replaced the hard drive 3 times, and after reading much about these problems, have decided to regress to 9.10. How do I do it? I am weary of cleaning my hard disk to download 9.10 in case it freezes in the middle of the process.
View 1 Replies View RelatedI never turn off my laptop so I never noticed this, Debian never ask me my user password ! I reboot my pc several time to be sure. However, If I lock the pc or hibernate, then Debian ask me my user password.
View 4 Replies View RelatedI'm using pm-hibernate, and would like to reboot the machine after it's done hibernating, rather than having the machine turn off.Is there a way to do this with pm-hibernate, or any other Linux hibernate thing?
View 2 Replies View RelatedPerformed the daily update, don't recall which packages were available, and the boot process freezes near the end upon trying to start my VNC server. Using rescue disk removed tiger-vnc server. Oddly upon reboot, selinux reset the files even though initial setting was 'permissive'. have not tried re-installed vnc yet.
View 3 Replies View RelatedWhen i boot from Clonezilla it keeps on freezing at the same point.I boot up and select clonezilla live then select the 600X800 (or whatever it is), I then see text scrolling from the bottom of the screen upwards as it is loading the kernel etc but freezes at a specific point for some reason which means i cant clone my drive. Does any have any ideas on how to fix this issue?
View 1 Replies View RelatedI had Ubuntu working perfectly until I installed updates for the proprietary Nvidia drivers.Now Ubuntu freezes at the Ubuntu loading screen. Im using Ubuntu 10.04 64bit.I used to know how to access the terminal at bootup but I no longer remember.
View 5 Replies View Relatedpm-hibernate and pm-suspend only work the first time after booting into runlevel 5. This behavior is reproducable. pm-hibernate starts out correctly but then hangs the system bevore it gets to save the image from memory to disk. The computer locks up and does not power down.
pm-suspend: on wake up there is no signal on the screen (pm-suspend called from X environment or text terminal shows same result). I spent some time reading information on s2ram s2disk and added the follwing options:
S2RAM_OPTS="-f" in
/etc/pm/config.d/00meine.config
(display adapter is GForce4 nvidia with the closed source nvidia driver for accel)
splash = n in
/etc/suspend.conf - to get some more information during the suspend / hibernate.
Any ideas to get pm-hibernate / pm-suspend to work more than one time after boot??? Hibernate would be a great start for daily work and for energy saving.
horstausdemwald PS: In runlevel 3 pm-hibernate works various times from a text terminal. Under the same condition pm-suspend leads to a scrambled text terminal after resuming (some help on this: using vga=normal in Grub). The computer continues to work - though without visual aid - when the text terminal is scarambled. For example Runlevel 5 can be called blindly from the text terminal.
I just performed my very first linux install. I used the Debian 6.0.1a iso. I made it all the way through the installation with no problems whatsoever. I was able to select the version from the grub screen, still everything seemed to be going fine...then it froze. I attached an image of the screen where the system froze:
Its basically the loading screen, times 4! At the top left in case its too hard to read, it says: Loading Linux 2.6.32-5-686, then...Loading initial ramdisk... This sounds all fine and dandy to me but it freezes here. I've tried searching the forums and google for an answer and have come up empty...I'm sure someone has had this problem but it seems to be a tough thing to search for. Would appreciate all the help I can get! Oh and btw, here are the system specs:
circa 2001ish Dell Dimension 4300
P4 1.4ghz
256 ram
onboard video etc...
I have Debian 6 (squeeze), I have also seen this under Ubuntu (can not remember how I fixed it).
I can hibernate, but when I switch on the system cold boots (it does not restore previous session).
Note suspend works fine. Have looked in /var/log/pm-suspend.log Shows for each suspend suspend block a resume suspend block, but hibernate hibernate' is not followed by resume hibernate` ( I assume that this is not correct. )
Update on what I have discovered: I have discovered that the uswsusp package is missing from debian squeeze. I could get it from testing or unstable repository, but have to be careful about not pulling in other dependencies. I would like to know if it will fix it. Is uswsusp needed for hibernate. Or should pm-utils be enough. (suspend it ram is working fine.)
Just got Ubuntu 9.10 and I'm liking it a lot, but my computer refuses to go into hibernate or suspend. I have a Dell M1530 but I don't really think it's a dell hardware issue because it's not just when I close the screen, it's also when I click suspend or hibernate from the menu.
View 2 Replies View RelatedOnce or twice a day, the entire system just locks up, and the only way I know to undo it is with a hard reset. (The mouse cursor still moves around--but it can't click on anything.) It did this with a clean Lucid install, and still does it with Maverick. Often, it's when I'm in Firefox (and usually a site with Flash), but I'm not 100% sure of that.
Now, one issue is that I don't know how to diagnose this issue. With the system frozen, it's hard to probe anything to see what went wrong. Is there a particular log file somewhere that I should check out, that may say what happened?
I have been running Ubuntu 9.04 on my netbook for quite some time.
Everything was fine hibernation and suspend both worked.
I changed out one of the hard drives (SSD) that contained my swap partition for a bigger one.
I recreated the swap partition to twice the amount of RAM
I finally got around to figuring out how to reactivate the swap file and using free it shows up.
When I set it to hibernate and close the lid I can tell by the hdd LED that it is hibernating then powers down.
But when I restart the system just boots normally instead of coming out of hibernation.
I found this line in dmseg when I was checking out another problem.
"[0.104467] ACPI Warning: Incorrect checksum in table [OEMB] - 03, should be FA 20090521 tbutils-246"
Could this be why I have never been able to resume from hibernate on this machine?
I recently installed Ubuntu 10.04 Lucid Lynx. When I partitioned my HDD, I ran out of available partitions and so couldn't make a Swap Partition.I pushed on anyway, because I read here that you can create a Swap File instead of a partition that does the same thing. I've made the Swap File and it's activated (I know because during shutdown there's a message that flashes very quickly that says "Deactivating Swap [OK]".
But here's the real problem. My Ubuntu refuses to Suspend or Hibernate. The screen just goes black and the backlight stays on. Since one of the main functions of the swap file is to facilitate Suspend and Hibernate,I upgraded from 9.10 Karmic Koala, which suspended and hibernated normally.
i dont need the password after hibernate,how i can disable request it in administration-login window selected auto login my name
View 5 Replies View RelatedI have tried to hibernate the system through the menu kde -> leave -> hibernate.The problem is that nothing happens and the system doesn't hibernate.Do I have to configure something? How can I investigate and solve this issue?
View 3 Replies View RelatedI have ubuntu 10.04 installed on a 50 gb partition on my hard drive I have given a 3.5 gb partition for swap which is > 3gb ram i have. Druing the installation of ubuntu I had specified the swap partition and its hibernate was working fine sometimes before. But I had to delete the swap partition and recreate it because of some reasons so I did that and again created a 3.5 gb partition for swap space usig ubuntu live cd.
But after restart ubuntu no longer detected the swap partition it was ok as its uuid had changed so I specified the swap partition to be mounted automatically by adding an entry in /etc/fstab and then also added the same UUID in /etc/initramfs-tools/conf.d/resume so that it could resume. After restarting ubuntu after adding the entrly in /etc/fstab i got the option of hibernate but after hibernate everything goes well but after hibernate when i start laptop again ubuntu first tries to resume but it does not and without giving any message it shows the login screen.
i have a dell mini 9 (1GB RAM) and hibernation does not work. It just comes up with an error saying that there is not enough space i have just done a fresh install and formatted everything though!
View 7 Replies View Relatedi have ubuntu 10.10 running on an ibm thinkpad T43p.
when i try to hibernate, this fails very often. sometimes i just get back a login screen (as if i had locked the screen) after about a minute of harddisk activity, sometimes the screen goes black but discs and fans keep running.
and - yes - sometimes it just works as it should.
I'm using Xubuntu 10.10 on a Toshiba laptop. Since I upgraded to Maverick, I noticed that the gdm login screen does no longer offer the option to hibernate my computer . The bottom right button can be used to "stop, "restart" or "suspend" but no "hibernate" option. I looked at the option the gconf-editor can toggle for simple-greeter, but no mention of "hibernate" option anywhere. Do you have the same issues on your laptop? How to make that "hibernate" option reappear ?
View 6 Replies View RelatedWhen I click on the "shutdown, logout, suspend etc."-button in the upper right corner there is no option to hibernate my machine. I've got suspend, reboot and shut down, but no hibernate. What would be the reason for this?
If it should tell anyone anything, my computer is a Packard Bell TJ71 laptop with the following lspci output:
Code:
00:00.0 Host bridge: Advanced Micro Devices [AMD] RS780 Host Bridge Alternate
00:01.0 PCI bridge: Acer Incorporated [ALI] Device 9602
00:04.0 PCI bridge: Advanced Micro Devices [AMD] RS780 PCI to PCI bridge (PCIE port 0)
[Code]....
What am I missing ? I can't get my computer to hibernate. Each time I click on hibernate it begins to do so then just as quickly comes back into run mode. I tried various options from ideas presented in Ubuntu forums but always I get the message "not enough free swap" despite the fact that I've allocated 2Gb for a swap partition. FYI .. I have 512 Mb of ram.Can anyone help or is this problem unsolvable ?
View 9 Replies View RelatedEver since I reinstalled Karmic Koala on this PC I've had a problem with random freezing. Initially I believed it to be an issue with my xorg.conf file, however, I disabled it and the crashing still persists..
Hardware:
Processor: Intel(R) Celeron(R) CPU 2.70GHz
Memory: 1GB
Graphics: 82845G/GL [Brookdale-G]/GE rev 01
For what it's worth, I use this same PC for windows XP and do not have this issue.
