I have encoutered a problem I selected Hibernate which Laptop did, Then I could not get it to start again, I hard Shutdown then restart It then just sits at Grub page when I hit enter to enter system it then loads to a black screen with blinking cursor. I have tried all other options recovery + 2 other earlier kernals all Kernals give same response.
View 4 RepliesMy laptop freezes when I boot it after a hibernate. The ubuntu logo shows and then there's a text that says "trying to resume from /dev/disk/by-uuid/8879ds7e-f2e1 (then it continues with a lot of numbers and slashes)" And then nothing happens.
View 3 Replies View RelatedI just installed the ubuntu 10.10 along with a dual boot of win7 and running toshiba m511, the problem is when I am using ubuntu I cant sleep, all I get is a black screen and then nada, the fans still on etc etc, I cant push any buttons and have to hard reset it, for it to start working again.
View 4 Replies View RelatedI've re-partitioned my existing windows xp disk to do a dual boot with Ubuntu 10.04 Lucid. The installation went fine and I am able to use both the operating systems just fine.
But when I boot into windows xp I donot have the hibernte/sleep options available anymore.
debug the issue and get back those options ?
Note: I have made the windows as default boot option in grub.
I had a dual boot umbutu 9.04 & xp Toshiba laptop satellite A15-S1292, (old bad battery). I use it mostly in linux but had been working in Windows, it may have hibernated and the next boot may have been to Linux. Now it boots straight into Ubuntu login screen that looks like it is may be returning from hibernate (don't use it normally). On boot don't see the normal BIOS announcement or screen allowing the selection of boot device. Doesn't boot Live CD from CD Rom or Suber Grub CD. When I examined the Windows mount receive warning that it could not be mounted as it was hibernated. I followed the suggested mount -t -ntfs -3g -o remove_hyberfile /dev/sda1 and can now access the windows partition. Boots still return to the same linux login screen. Don't seem to be able to boot from anything else.
View 1 Replies View RelatedI never turn off my laptop so I never noticed this, Debian never ask me my user password ! I reboot my pc several time to be sure. However, If I lock the pc or hibernate, then Debian ask me my user password.
View 4 Replies View RelatedI'm using pm-hibernate, and would like to reboot the machine after it's done hibernating, rather than having the machine turn off.Is there a way to do this with pm-hibernate, or any other Linux hibernate thing?
View 2 Replies View Relatedpm-hibernate and pm-suspend only work the first time after booting into runlevel 5. This behavior is reproducable. pm-hibernate starts out correctly but then hangs the system bevore it gets to save the image from memory to disk. The computer locks up and does not power down.
pm-suspend: on wake up there is no signal on the screen (pm-suspend called from X environment or text terminal shows same result). I spent some time reading information on s2ram s2disk and added the follwing options:
S2RAM_OPTS="-f" in
/etc/pm/config.d/00meine.config
(display adapter is GForce4 nvidia with the closed source nvidia driver for accel)
splash = n in
/etc/suspend.conf - to get some more information during the suspend / hibernate.
Any ideas to get pm-hibernate / pm-suspend to work more than one time after boot??? Hibernate would be a great start for daily work and for energy saving.
horstausdemwald PS: In runlevel 3 pm-hibernate works various times from a text terminal. Under the same condition pm-suspend leads to a scrambled text terminal after resuming (some help on this: using vga=normal in Grub). The computer continues to work - though without visual aid - when the text terminal is scarambled. For example Runlevel 5 can be called blindly from the text terminal.
I have Debian 6 (squeeze), I have also seen this under Ubuntu (can not remember how I fixed it).
I can hibernate, but when I switch on the system cold boots (it does not restore previous session).
Note suspend works fine. Have looked in /var/log/pm-suspend.log Shows for each suspend suspend block a resume suspend block, but hibernate hibernate' is not followed by resume hibernate` ( I assume that this is not correct. )
Update on what I have discovered: I have discovered that the uswsusp package is missing from debian squeeze. I could get it from testing or unstable repository, but have to be careful about not pulling in other dependencies. I would like to know if it will fix it. Is uswsusp needed for hibernate. Or should pm-utils be enough. (suspend it ram is working fine.)
Just got Ubuntu 9.10 and I'm liking it a lot, but my computer refuses to go into hibernate or suspend. I have a Dell M1530 but I don't really think it's a dell hardware issue because it's not just when I close the screen, it's also when I click suspend or hibernate from the menu.
View 2 Replies View RelatedI have been running Ubuntu 9.04 on my netbook for quite some time.
Everything was fine hibernation and suspend both worked.
I changed out one of the hard drives (SSD) that contained my swap partition for a bigger one.
I recreated the swap partition to twice the amount of RAM
I finally got around to figuring out how to reactivate the swap file and using free it shows up.
When I set it to hibernate and close the lid I can tell by the hdd LED that it is hibernating then powers down.
But when I restart the system just boots normally instead of coming out of hibernation.
I found this line in dmseg when I was checking out another problem.
"[0.104467] ACPI Warning: Incorrect checksum in table [OEMB] - 03, should be FA 20090521 tbutils-246"
Could this be why I have never been able to resume from hibernate on this machine?
I recently installed Ubuntu 10.04 Lucid Lynx. When I partitioned my HDD, I ran out of available partitions and so couldn't make a Swap Partition.I pushed on anyway, because I read here that you can create a Swap File instead of a partition that does the same thing. I've made the Swap File and it's activated (I know because during shutdown there's a message that flashes very quickly that says "Deactivating Swap [OK]".
But here's the real problem. My Ubuntu refuses to Suspend or Hibernate. The screen just goes black and the backlight stays on. Since one of the main functions of the swap file is to facilitate Suspend and Hibernate,I upgraded from 9.10 Karmic Koala, which suspended and hibernated normally.
i dont need the password after hibernate,how i can disable request it in administration-login window selected auto login my name
View 5 Replies View RelatedI have tried to hibernate the system through the menu kde -> leave -> hibernate.The problem is that nothing happens and the system doesn't hibernate.Do I have to configure something? How can I investigate and solve this issue?
View 3 Replies View RelatedI have ubuntu 10.04 installed on a 50 gb partition on my hard drive I have given a 3.5 gb partition for swap which is > 3gb ram i have. Druing the installation of ubuntu I had specified the swap partition and its hibernate was working fine sometimes before. But I had to delete the swap partition and recreate it because of some reasons so I did that and again created a 3.5 gb partition for swap space usig ubuntu live cd.
But after restart ubuntu no longer detected the swap partition it was ok as its uuid had changed so I specified the swap partition to be mounted automatically by adding an entry in /etc/fstab and then also added the same UUID in /etc/initramfs-tools/conf.d/resume so that it could resume. After restarting ubuntu after adding the entrly in /etc/fstab i got the option of hibernate but after hibernate everything goes well but after hibernate when i start laptop again ubuntu first tries to resume but it does not and without giving any message it shows the login screen.
i have a dell mini 9 (1GB RAM) and hibernation does not work. It just comes up with an error saying that there is not enough space i have just done a fresh install and formatted everything though!
View 7 Replies View Relatedi have ubuntu 10.10 running on an ibm thinkpad T43p.
when i try to hibernate, this fails very often. sometimes i just get back a login screen (as if i had locked the screen) after about a minute of harddisk activity, sometimes the screen goes black but discs and fans keep running.
and - yes - sometimes it just works as it should.
I'm using Xubuntu 10.10 on a Toshiba laptop. Since I upgraded to Maverick, I noticed that the gdm login screen does no longer offer the option to hibernate my computer . The bottom right button can be used to "stop, "restart" or "suspend" but no "hibernate" option. I looked at the option the gconf-editor can toggle for simple-greeter, but no mention of "hibernate" option anywhere. Do you have the same issues on your laptop? How to make that "hibernate" option reappear ?
View 6 Replies View RelatedWhen I click on the "shutdown, logout, suspend etc."-button in the upper right corner there is no option to hibernate my machine. I've got suspend, reboot and shut down, but no hibernate. What would be the reason for this?
If it should tell anyone anything, my computer is a Packard Bell TJ71 laptop with the following lspci output:
Code:
00:00.0 Host bridge: Advanced Micro Devices [AMD] RS780 Host Bridge Alternate
00:01.0 PCI bridge: Acer Incorporated [ALI] Device 9602
00:04.0 PCI bridge: Advanced Micro Devices [AMD] RS780 PCI to PCI bridge (PCIE port 0)
[Code]....
What am I missing ? I can't get my computer to hibernate. Each time I click on hibernate it begins to do so then just as quickly comes back into run mode. I tried various options from ideas presented in Ubuntu forums but always I get the message "not enough free swap" despite the fact that I've allocated 2Gb for a swap partition. FYI .. I have 512 Mb of ram.Can anyone help or is this problem unsolvable ?
View 9 Replies View RelatedMy netbook does not hibernate when lid is closed. Sometimes it does but usually not. At first I was thinking it was getting confused after recharging, thinking it was still in AC mode. I suppose it could be some process running in the background but don't know how to identify which one would cause that. If that were the case, would I be able to manually go to Hibernate?
I've checked my preferences and "On Battery Power" "When Lid is closed" is set to Hibernate.
I have an ASUS 1000. I recently upgraded to Ubuntu 9.1 karmic.
I'm using Ubuntu 9.10 and recently installed Virtualbox PUEL edition that I downloaded from the Virtual box website. So I installed a virtual windows XP and it works fine. However, when the virtual XP is running, my computer can't go to hibernate when I click the hibernate button.The screen just turns black for several seconds and then brings me back to the login screen. When I shut down the virtual xp, the computer can go to hibernate the normal way.Why is it that running the virtual machine prevents my pc from hibernating?Is there a setting to enable hibernation while the virtual machine is running?
View 4 Replies View Relatedkubuntu 9.10, KDE 4.4.1, Nvidia driver 195
jeff@jeff-lappy:~$ sudo hibernate hibernate:Warning: Tuxonice binary signature file not found. Some modules failed to unload: nvidia hibernate: Aborting suspend due to errors in ModulesUnloadBlacklist (use --force to override).
I even installed this tuxonice thing but to no avail...
I'm experiencing very slow resume from hibernation. Last one was nearly 3 minutes. Sure, there is 2GB of RAM to read from disk (no SSD) to memory but that long?What could I check/do?
View 4 Replies View RelatedI can Suspend or Hibernate my Gateway notebook but I have no idea how to wake it up.The power button is set to suspend or hibernate....I not sure which it does, but I can't wake the computer up.
View 9 Replies View RelatedI have recently installed OpenSuse with GRUB boot-loader on my Vaio FW series laptop. I had to uninstall it because it caused Windows 7 to be unable to hibernate. I installed other distros (Fedora 11 and others) and the same problem recurred. This lead me to the conclusion that the problem is with the boot-loader (as my research suggested)..It has been months now, and I have not found any proper solutions to this yet. Linking this to Ubuntu, I recently downloaded and burned Ubuntu 10.04 LTS, however, I am still reluctant to install it until I know a solution is available. Has anyone had Linux-Windows 7 dualboot and also faced problems with hibernation/stand-by?
View 3 Replies View Relatedmy Eee PC has various troubles with the current Lucid kernel (2.6.32). These include, that the wifi won't work and that I can't use hibernate. A netbook without wifi is a little bit useless I even tried the usual bugfixes, that you can find in the web (installing the original RAlink drivers, updating to 2.6.33), but nothing really worked.As a consequence, I downgraded to Karmic again, were everything just worked fine.My question is now, is it possible to run Lucid with the older kernel available in Karmic?
View 1 Replies View RelatedMy suspend and hibernate buttons are not working. When I try to return from a suspend, I do not get a kernel panic, but nothing loads onto the screen.
View 7 Replies View Relatedwhen i try and hibernate it says the space is not large enough however i have 4GB of space free and ONLY 1GB of RAM (it's a netbook).how can i get it to hibernate?
View 6 Replies View Related