I have tried to hibernate the system through the menu kde -> leave -> hibernate.The problem is that nothing happens and the system doesn't hibernate.Do I have to configure something? How can I investigate and solve this issue?
I've got a problem with hibernating my laptop. It manages to copy everything to swap memory, but when it finishes, it won't power off my laptop. I have to manually turn it off (by pressing the power button for a few seconds). If I restart, everything is still there, so the hibernating itself works, but not the powering off part. My laptop is an Asus notebook K52F with Ubuntu 11.04 and Gnome 3.
Machine is a Dell Optiplex GX260, Pentium 4 with ATI Radeon RV200 QW [Radeon 7500]. I believe this is an AGP graphics card. I also believe that the graphics card is the root of my problem. In Karmic, I could get the computer to suspend. but it would not resume. The monitor would not initiate and it seemed as though the system froze. Only way out was a hard reboot. Hibernate worked for me without any problems, so it was no deal breaker. Now in Meerkat, Suspend behaves exactly as before. However, I can not get the system to go into hibernation.
The monitor goes down, but the system seems to freeze and never go down. I have tried editing the options in the acpi-support file to no avail. I have tried disabling compiz (which works amazingly well with this card), to no avail. I am using the open-source drivers and I have not tried the closed-source drivers in this system. I tried the closed-source drivers in Karmic and they made no difference. I may try un-installing the ATI card and fall back on the on-board Intel chipset to see if that solves the problem. Only then, I will loose 3d effects, etc.
I'm using CentOS 5.6, kernel version 2.6.18-238.12.1.el5xen, and the Hibernate and Standby options don't even appear in the System menu. How can I get them to appear?
The funny thing is that before I reset my system to a clean install of CentOS 5.6, I was able to see those entries and execute them just fine. (I think that in that previous installation, by doing some updating of packages I got another kernel version and booting into that one showed the menu items.)
Could it have something to do with the fact that it's a xen kernel? Even though I've disabled xend, it doesn't appear.
i dont know why my system dosnt resume from suspend sstate.i it goes in suspend state.it doesnt resume .i have to poweroff then restart it again.and when i get logged in it gives me Following Error: Resume problem: Your system did not appear to resume correctly from Suspend/Hibernate. This may be a driver problem or a hardware problem. Check the GNOME Power Manager Manual for common problems.
do you think it is because of batterry.i have a problem in my By Battery .IN DOS operating system.when i check my battery icon . A red Cross constantly blink on lower right side of the battery and it says (your Battery consider Replacing).i have notice one thing .And My battery timing hias become Decreased. Do you think this Resume problm is cause of battery problm.Or there is some problm in my Os software.
wifi card:atheros ar5007egOS: openSUSE11.4My laptop can't connect on network after system hibernate. It has been asking me for enter the wifi password. But when I input the wifi password it still can't connect on network. I have to reboot it.
OS Ubuntu 10.04 Error occurred as system was attempting to hibernate Some error codes appeared Then I was returned to desktop environment. Question: Want to know how to copy the error to post
I'm using pm-hibernate, and would like to reboot the machine after it's done hibernating, rather than having the machine turn off.Is there a way to do this with pm-hibernate, or any other Linux hibernate thing?
Just got Ubuntu 9.10 and I'm liking it a lot, but my computer refuses to go into hibernate or suspend. I have a Dell M1530 but I don't really think it's a dell hardware issue because it's not just when I close the screen, it's also when I click suspend or hibernate from the menu.
I don't know why "hibernate" disappear.It has swap on my fedora before.But I delete swap partition by accident.Does my problem has something related to this?
I found this line in dmseg when I was checking out another problem. "[0.104467] ACPI Warning: Incorrect checksum in table [OEMB] - 03, should be FA 20090521 tbutils-246" Could this be why I have never been able to resume from hibernate on this machine?
I recently installed Ubuntu 10.04 Lucid Lynx. When I partitioned my HDD, I ran out of available partitions and so couldn't make a Swap Partition.I pushed on anyway, because I read here that you can create a Swap File instead of a partition that does the same thing. I've made the Swap File and it's activated (I know because during shutdown there's a message that flashes very quickly that says "Deactivating Swap [OK]".
But here's the real problem. My Ubuntu refuses to Suspend or Hibernate. The screen just goes black and the backlight stays on. Since one of the main functions of the swap file is to facilitate Suspend and Hibernate,I upgraded from 9.10 Karmic Koala, which suspended and hibernated normally.
I have ubuntu 10.04 installed on a 50 gb partition on my hard drive I have given a 3.5 gb partition for swap which is > 3gb ram i have. Druing the installation of ubuntu I had specified the swap partition and its hibernate was working fine sometimes before. But I had to delete the swap partition and recreate it because of some reasons so I did that and again created a 3.5 gb partition for swap space usig ubuntu live cd.
But after restart ubuntu no longer detected the swap partition it was ok as its uuid had changed so I specified the swap partition to be mounted automatically by adding an entry in /etc/fstab and then also added the same UUID in /etc/initramfs-tools/conf.d/resume so that it could resume. After restarting ubuntu after adding the entrly in /etc/fstab i got the option of hibernate but after hibernate everything goes well but after hibernate when i start laptop again ubuntu first tries to resume but it does not and without giving any message it shows the login screen.
i have a dell mini 9 (1GB RAM) and hibernation does not work. It just comes up with an error saying that there is not enough space i have just done a fresh install and formatted everything though!
i have ubuntu 10.10 running on an ibm thinkpad T43p.
when i try to hibernate, this fails very often. sometimes i just get back a login screen (as if i had locked the screen) after about a minute of harddisk activity, sometimes the screen goes black but discs and fans keep running.
I have encoutered a problem I selected Hibernate which Laptop did, Then I could not get it to start again, I hard Shutdown then restart It then just sits at Grub page when I hit enter to enter system it then loads to a black screen with blinking cursor. I have tried all other options recovery + 2 other earlier kernals all Kernals give same response.
I'm using Xubuntu 10.10 on a Toshiba laptop. Since I upgraded to Maverick, I noticed that the gdm login screen does no longer offer the option to hibernate my computer . The bottom right button can be used to "stop, "restart" or "suspend" but no "hibernate" option. I looked at the option the gconf-editor can toggle for simple-greeter, but no mention of "hibernate" option anywhere. Do you have the same issues on your laptop? How to make that "hibernate" option reappear ?
When I click on the "shutdown, logout, suspend etc."-button in the upper right corner there is no option to hibernate my machine. I've got suspend, reboot and shut down, but no hibernate. What would be the reason for this?
If it should tell anyone anything, my computer is a Packard Bell TJ71 laptop with the following lspci output:
What am I missing ? I can't get my computer to hibernate. Each time I click on hibernate it begins to do so then just as quickly comes back into run mode. I tried various options from ideas presented in Ubuntu forums but always I get the message "not enough free swap" despite the fact that I've allocated 2Gb for a swap partition. FYI .. I have 512 Mb of ram.Can anyone help or is this problem unsolvable ?
My netbook does not hibernate when lid is closed. Sometimes it does but usually not. At first I was thinking it was getting confused after recharging, thinking it was still in AC mode. I suppose it could be some process running in the background but don't know how to identify which one would cause that. If that were the case, would I be able to manually go to Hibernate?
I've checked my preferences and "On Battery Power" "When Lid is closed" is set to Hibernate.
I have an ASUS 1000. I recently upgraded to Ubuntu 9.1 karmic.
I'm using Ubuntu 9.10 and recently installed Virtualbox PUEL edition that I downloaded from the Virtual box website. So I installed a virtual windows XP and it works fine. However, when the virtual XP is running, my computer can't go to hibernate when I click the hibernate button.The screen just turns black for several seconds and then brings me back to the login screen. When I shut down the virtual xp, the computer can go to hibernate the normal way.Why is it that running the virtual machine prevents my pc from hibernating?Is there a setting to enable hibernation while the virtual machine is running?
jeff@jeff-lappy:~$ sudo hibernate hibernate:Warning: Tuxonice binary signature file not found. Some modules failed to unload: nvidia hibernate: Aborting suspend due to errors in ModulesUnloadBlacklist (use --force to override).
I even installed this tuxonice thing but to no avail...
I'm experiencing very slow resume from hibernation. Last one was nearly 3 minutes. Sure, there is 2GB of RAM to read from disk (no SSD) to memory but that long?What could I check/do?
I can Suspend or Hibernate my Gateway notebook but I have no idea how to wake it up.The power button is set to suspend or hibernate....I not sure which it does, but I can't wake the computer up.
I have recently installed OpenSuse with GRUB boot-loader on my Vaio FW series laptop. I had to uninstall it because it caused Windows 7 to be unable to hibernate. I installed other distros (Fedora 11 and others) and the same problem recurred. This lead me to the conclusion that the problem is with the boot-loader (as my research suggested)..It has been months now, and I have not found any proper solutions to this yet. Linking this to Ubuntu, I recently downloaded and burned Ubuntu 10.04 LTS, however, I am still reluctant to install it until I know a solution is available. Has anyone had Linux-Windows 7 dualboot and also faced problems with hibernation/stand-by?
my Eee PC has various troubles with the current Lucid kernel (2.6.32). These include, that the wifi won't work and that I can't use hibernate. A netbook without wifi is a little bit useless I even tried the usual bugfixes, that you can find in the web (installing the original RAlink drivers, updating to 2.6.33), but nothing really worked.As a consequence, I downgraded to Karmic again, were everything just worked fine.My question is now, is it possible to run Lucid with the older kernel available in Karmic?