Ubuntu :: No Entry For Hibernate?
Jan 8, 2011
When I click on the "shutdown, logout, suspend etc."-button in the upper right corner there is no option to hibernate my machine. I've got suspend, reboot and shut down, but no hibernate. What would be the reason for this?
If it should tell anyone anything, my computer is a Packard Bell TJ71 laptop with the following lspci output:
Code:
00:00.0 Host bridge: Advanced Micro Devices [AMD] RS780 Host Bridge Alternate
00:01.0 PCI bridge: Acer Incorporated [ALI] Device 9602
00:04.0 PCI bridge: Advanced Micro Devices [AMD] RS780 PCI to PCI bridge (PCIE port 0)
[Code]....
View 8 Replies
ADVERTISEMENT
Apr 10, 2010
I'm using pm-hibernate, and would like to reboot the machine after it's done hibernating, rather than having the machine turn off.Is there a way to do this with pm-hibernate, or any other Linux hibernate thing?
View 2 Replies
View Related
Mar 16, 2010
Just got Ubuntu 9.10 and I'm liking it a lot, but my computer refuses to go into hibernate or suspend. I have a Dell M1530 but I don't really think it's a dell hardware issue because it's not just when I close the screen, it's also when I click suspend or hibernate from the menu.
View 2 Replies
View Related
Apr 1, 2011
I have the following error on one of my servers. Is there a way to tell which directory is exactly having the problem? if there is, if i delete that directory, will that resolve the problem or no?kernel: EXT2-fs error (device md(9,0)): ext2_check_page: bad entry in directory #10158084: unaligned directory entry - offset=0, inode=605471640, rec_len=7606, name_len=177
View 4 Replies
View Related
Mar 19, 2010
I just installed archlinux to try it out and need to add the entry to Grub.
I formated the hard drive with the a root partition for arch of 42Gb and ubuntu can see it perfeclty.
When I was installing arch I made a mistake and installed grub again, overwriting my previous grub with my ubuntu and windows entries.
So I fixed and got my working grub back with SuperGrubDisk, but now I want to add the ARCHLINUX entry to Grub and dont know how. I have added the previous entries from the grub that ARCH installed and moved the initrd and vmlinuz files to the /boot directory on ubuntu, but it doesnt work. I did a similar thing with Acronis True Image rescue cds(to avoid having to insert the cd in order to use it) and it worked like a charm, but I am lost in this one.
Here are my partitions, sdb is the one where all my partitions and files are (sdb5 is where ARCH is), the other 2 are backups:
Quote:
Disk /dev/sda: 2000.4 GB, 2000398934016 bytes
255 heads, 63 sectors/track, 243201 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes
Disk identifier: 0xda85214c
[Code]....
View 4 Replies
View Related
Jan 17, 2010
Here is my current setup. I have installed Windows 7 Home Premium 64-bit, Ubuntu 9.10 64-bit, and BackTrack 4 Final in that order. All operating systems are able to boot and all is working well. The only problem I'm faced with is really just an annoyance. Which is BackTrack is showing up with a "Ubuntu 8.10" entry name.
Now I did some research on this. I found out that BackTrack was based on the Ubuntu 8.10 OS so it makes sense why it would show up that way. I found several articles and topics explaining how to modify the GRUB programming files. I guess to change the entry name, but all of them don't seem fool proof to me nor the best way to go about doing things.
One thing I wasn't able to find info on is where GRUB2 actually gets these entry names from. My theory is if I can find out where GRUB gets this info from, I can simply log into the BackTrack partition and change where the "Ubuntu 8.10" entry is to "BackTrack 4" and then run the update-grub2 command within Ubuntu to update the entry names.
View 7 Replies
View Related
Jul 5, 2010
I share a computer with my brother. It runs Lucid Lynx. I want to add an entry to the hosts file that will affect him negatively. Is there a way I can add the entry, without it affecting him, like, is there a user-specific hosts file?
View 9 Replies
View Related
Sep 19, 2010
I seem to be having some issue with GRUB. I installed the kernel update just last night and when I went to turn on my computer today my entry to Win 7 was gone.I am able to boot into Lucid with ease but what happened to Windows 7 all of a sudden? I was using it just y-day and restarted to boot into Lucid to catch up on any updates.
It also appears that my 1 TB HDD isn't appearing either. Kernel update gone bad?
View 8 Replies
View Related
Oct 26, 2010
I have a pc where there was redhat installed, and I decided to put ubuntu in dual boot.The installation went ok, but now I can't log in with redhat anymore. RH was installed on a RAID partition, and I installed ubuntu on an additional HD.
Now I have two problems:
a) I cannot boot red hat, since there is no such entry in the grub
b) this machine had several users, that now cannot access it remotely anymore.
Below you can find the output of fdisk -l and the grub.cfg files, the old red hat one, and the new one created by ubuntu. Not that in any case I cannot reinstall redhat, since there are other people using the machine.
[Code]...
View 2 Replies
View Related
Oct 30, 2010
How do you find out which USB device in lsusb maps to what /dev entry? How do you find out which /dev entry maps to what /device entry? What about drives with multiple partitions?
View 8 Replies
View Related
Nov 15, 2010
I was cleaning old kernels from Grub menu, all sorted except for a vista entry that i could not delete. Ran this line which I found,"sudo chmod -x /etc/grub.d/30_os-prober", to remove unwanted entries, now only the linux entry left in Grub menu, windows 7 entry gone. The vista entry was from an old install which is not there anymore. Running 10.10 at the moment which is dualbooted with win7.
View 7 Replies
View Related
Dec 23, 2010
i just know about this : Boot Info Script 0.55 dated February 15th, 2010
[Code]...
View 9 Replies
View Related
Feb 19, 2011
I have installed Sabayon 5.4 on my laptop besides Ubuntu 10.10. During installation of Sabayon I did not opt for a bootloader as I did not want to disturb the already existing Grub2 on MBR from my Ubuntu installation.After successful installation of Sabayon, I booted into Ubuntu and updated the Grub which detected Sabayon correctly. Then I rebooted and tried to boot into Sabayon but I could not do so. The booting process stopped with the following error -
Code:
Activating mdev
Detected real-root as md device. Setting up device node
Scanning for Volume Groups
[code]....
So evidently, Grub has wrongly taken the values of root as /dev/md0 and swap as /dev/sda2.I again went back to Grub2 screen edited the Sabayon entry by replacing /dev/md0- with /dev/sda4 and swap:/dev/sda2 with swap:/dev/sda8 and pressed Ctrl+x. Now I was able to boot into Sabayon. how do I make these changes permanent. Which files should I edit so that Grub correctly read root as /dev/sda4 and swap as /dev/sda8?
View 4 Replies
View Related
Apr 4, 2011
i have a program showing up in the application tab. Since i need to do the ALT F2 command to use program can i remove it from the app tab.If so how?
View 2 Replies
View Related
Jun 30, 2010
I'm currently dual-booting slack 13.0 and ubuntu 10.04 When slack was originally installed, I had an earlier version of ubuntu on it, and lilo did not pick up the ubuntu. At that time, I didn't care, because I had no use for the 'old' ubuntu. When I installed ubuntu 10.04, the boot config file (/boot/grub/grub.cfg) did include an entry for slackware. Great! I am looking forward to upgrading slack to 13.1, but I want to make sure this time that I can also boot ubuntu, should I need to use it.
1)Slack installation instructions that would enable me to include the other distro in the initial install
2)Instructions on how to edit andprocess lilo.conf after the slack What follows is a dump of df from the ubunutu 'side'..
Code:
tim@bart:~$ df
Filesystem 1K-blocks Used Available Use% Mounted on
/dev/sda6 52866604 6227476 43953640 13% /
none 1478976 300 1478676 1% /dev
[code]....
View 14 Replies
View Related
Feb 16, 2010
I have been running Ubuntu 9.04 on my netbook for quite some time.
Everything was fine hibernation and suspend both worked.
I changed out one of the hard drives (SSD) that contained my swap partition for a bigger one.
I recreated the swap partition to twice the amount of RAM
I finally got around to figuring out how to reactivate the swap file and using free it shows up.
When I set it to hibernate and close the lid I can tell by the hdd LED that it is hibernating then powers down.
But when I restart the system just boots normally instead of coming out of hibernation.
View 2 Replies
View Related
Mar 28, 2010
I found this line in dmseg when I was checking out another problem.
"[0.104467] ACPI Warning: Incorrect checksum in table [OEMB] - 03, should be FA 20090521 tbutils-246"
Could this be why I have never been able to resume from hibernate on this machine?
View 1 Replies
View Related
Apr 13, 2010
I recently installed Ubuntu 10.04 Lucid Lynx. When I partitioned my HDD, I ran out of available partitions and so couldn't make a Swap Partition.I pushed on anyway, because I read here that you can create a Swap File instead of a partition that does the same thing. I've made the Swap File and it's activated (I know because during shutdown there's a message that flashes very quickly that says "Deactivating Swap [OK]".
But here's the real problem. My Ubuntu refuses to Suspend or Hibernate. The screen just goes black and the backlight stays on. Since one of the main functions of the swap file is to facilitate Suspend and Hibernate,I upgraded from 9.10 Karmic Koala, which suspended and hibernated normally.
View 9 Replies
View Related
May 8, 2010
i dont need the password after hibernate,how i can disable request it in administration-login window selected auto login my name
View 5 Replies
View Related
Sep 17, 2010
I have tried to hibernate the system through the menu kde -> leave -> hibernate.The problem is that nothing happens and the system doesn't hibernate.Do I have to configure something? How can I investigate and solve this issue?
View 3 Replies
View Related
Oct 14, 2010
I have ubuntu 10.04 installed on a 50 gb partition on my hard drive I have given a 3.5 gb partition for swap which is > 3gb ram i have. Druing the installation of ubuntu I had specified the swap partition and its hibernate was working fine sometimes before. But I had to delete the swap partition and recreate it because of some reasons so I did that and again created a 3.5 gb partition for swap space usig ubuntu live cd.
But after restart ubuntu no longer detected the swap partition it was ok as its uuid had changed so I specified the swap partition to be mounted automatically by adding an entry in /etc/fstab and then also added the same UUID in /etc/initramfs-tools/conf.d/resume so that it could resume. After restarting ubuntu after adding the entrly in /etc/fstab i got the option of hibernate but after hibernate everything goes well but after hibernate when i start laptop again ubuntu first tries to resume but it does not and without giving any message it shows the login screen.
View 8 Replies
View Related
Oct 17, 2010
i have a dell mini 9 (1GB RAM) and hibernation does not work. It just comes up with an error saying that there is not enough space i have just done a fresh install and formatted everything though!
View 7 Replies
View Related
Oct 22, 2010
i have ubuntu 10.10 running on an ibm thinkpad T43p.
when i try to hibernate, this fails very often. sometimes i just get back a login screen (as if i had locked the screen) after about a minute of harddisk activity, sometimes the screen goes black but discs and fans keep running.
and - yes - sometimes it just works as it should.
View 4 Replies
View Related
Oct 30, 2010
I have encoutered a problem I selected Hibernate which Laptop did, Then I could not get it to start again, I hard Shutdown then restart It then just sits at Grub page when I hit enter to enter system it then loads to a black screen with blinking cursor. I have tried all other options recovery + 2 other earlier kernals all Kernals give same response.
View 4 Replies
View Related
Dec 2, 2010
I'm using Xubuntu 10.10 on a Toshiba laptop. Since I upgraded to Maverick, I noticed that the gdm login screen does no longer offer the option to hibernate my computer . The bottom right button can be used to "stop, "restart" or "suspend" but no "hibernate" option. I looked at the option the gconf-editor can toggle for simple-greeter, but no mention of "hibernate" option anywhere. Do you have the same issues on your laptop? How to make that "hibernate" option reappear ?
View 6 Replies
View Related
Jan 24, 2010
What am I missing ? I can't get my computer to hibernate. Each time I click on hibernate it begins to do so then just as quickly comes back into run mode. I tried various options from ideas presented in Ubuntu forums but always I get the message "not enough free swap" despite the fact that I've allocated 2Gb for a swap partition. FYI .. I have 512 Mb of ram.Can anyone help or is this problem unsolvable ?
View 9 Replies
View Related
Jan 6, 2010
I have installed ubuntu 9.10 and everything was working fine. Just a minutes ago a window popped up telling me that a complete update couldn't be completed, and asked me to go on with a partial update. I did it and then a window popped up (I think it was debconf running) asking me if I wanted to delete phpmyadmin database configuration or if I wanted to keep it... seemed like the updater was removing quite a bunch of packages!
After that I was presented with a long list of packages to be removed (among them apache2, php5, linux headers, etc.) I thought it was going to remove them in order to reinstall them latter, so I let it go) but now there's no ubuntu entry in the grub menu, so I had to boot with windows! Right now I'm downloading ubuntu 9.10 livecd to give it a try...
View 5 Replies
View Related
Jan 14, 2010
My problem is this, I decided to try Pardus since I had the disk space available and learned that it never created a entry for Ubuntu 9.10 64-Bit. I have tried many different boot options and have only gotten it to show the first black and white bootsplash but never can continue to boot. Is there a option I am forgetting to add via Pardus's GRUB editor or is it something else?
View 3 Replies
View Related
Feb 23, 2010
check this out and let me know if you have any ideas or a better way to install this silly thing. At the moment I'm using 185 drivers and I would not mind upgrading to 190 or even 195 versions of the driver.
My video card is a Nvidia 9800 GT 512mb.1- Add repositories to ubuntu 9.04 and 9.10 karmic koala
- For ubuntu 9.10 karmic koala :
You have to add the repository using this command :
sudo add-apt-repository ppa:nvidia-vdpau/ppa
2- Now update or refresh the installation
sudo apt-get update
3- Install the driver :
[Code]...
View 3 Replies
View Related
Mar 10, 2010
Update Mgr got me a bunch of updates today, including a kernel (2.6.31-20). I was doing something else, and when it prompted me to do something with menu.lst, I accidentally accepted the default, which I think was to keep menu.lst unchanged.
As a result, the new kernel was installed but not added to menu.lst, so I guess I can't boot to it.
Is there a way to tell my computer, "make the entries into menu.lst automatically"
I guess I could put the entries in manually, but as a beginner, I'm pretty scared to be messing with that file...perhaps if someone has a link to an exceptionally understandable explanation...
View 4 Replies
View Related
