Ubuntu :: Why Cannot Resume From Hibernate

Mar 28, 2010

I found this line in dmseg when I was checking out another problem.
"[0.104467] ACPI Warning: Incorrect checksum in table [OEMB] - 03, should be FA 20090521 tbutils-246"
Could this be why I have never been able to resume from hibernate on this machine?

View 1 Replies


ADVERTISEMENT

Ubuntu :: 10.04 Does Not Resume From Hibernate

Oct 14, 2010

I have ubuntu 10.04 installed on a 50 gb partition on my hard drive I have given a 3.5 gb partition for swap which is > 3gb ram i have. Druing the installation of ubuntu I had specified the swap partition and its hibernate was working fine sometimes before. But I had to delete the swap partition and recreate it because of some reasons so I did that and again created a 3.5 gb partition for swap space usig ubuntu live cd.

But after restart ubuntu no longer detected the swap partition it was ok as its uuid had changed so I specified the swap partition to be mounted automatically by adding an entry in /etc/fstab and then also added the same UUID in /etc/initramfs-tools/conf.d/resume so that it could resume. After restarting ubuntu after adding the entrly in /etc/fstab i got the option of hibernate but after hibernate everything goes well but after hibernate when i start laptop again ubuntu first tries to resume but it does not and without giving any message it shows the login screen.

View 8 Replies View Related

Ubuntu :: Slow Resume From Hibernate

May 3, 2010

I'm experiencing very slow resume from hibernation. Last one was nearly 3 minutes. Sure, there is 2GB of RAM to read from disk (no SSD) to memory but that long?What could I check/do?

View 4 Replies View Related

Debian :: Cannot Resume After Hibernate

May 21, 2015

My system cannot resume after hibernation. I have done all as described here [URL] ...

My have set up swap file "/swap_debian".

I have 3 partitions: sda1: windows boot partition. sda2: windows 8.1. sda3 : debian

I have the only linux distro installed: debian.

I have read lots of web pages. I have managed to set up suspend 2 disk. After dancing 2 days at the computer the system still cannot resume. I am getting "clearing orphaned inode" msgs while booting, and when booted to ram was not recovered.

Swap file is 4000 MB, RAM is 3860 something MB

My current grub is:

Code: Select all# If you change this file, run 'update-grub' afterwards to update
# /boot/grub/grub.cfg.
# For full documentation of the options in this file, see:
#   info -f grub -n 'Simple configuration'

[Code] ....

And yes, I did update-grub.

My current /etc/uswsusp.conf is:

Code: Select all# /etc/uswsusp.conf(5) -- Configuration file for s2disk/s2both
resume device = /dev/sda3
compress = y
early writeout = y
image size = 1855258869
RSA key file = /etc/uswsusp.key
shutdown method = platform
resume offset = 31606784

My current /etc/fstab is:

Code: Select all# /etc/fstab: static file system information.
#
# Use 'blkid' to print the universally unique identifier for a
# device; this may be used with UUID= as a more robust way to name devices
# that works even if disks are added and removed. See fstab(5).

[Code] ....

View 0 Replies View Related

Ubuntu :: Computer Will Not Resume From Hibernate/suspend?

Apr 7, 2010

I just got a Dell Inspiron 1764 and am dual booting it with Win7 and Ubuntu 9.10.Whenever I hibernate or suspend, it goes through everything fine, but then when I resume it just boots to a black screen and I have to do a hard shutdown. Is there a fix for this? I know it's a fairly common issue.

View 1 Replies View Related

Ubuntu :: Continuously Resume A Session From Hibernate

Apr 13, 2010

So I'm having this weird problem where my computer wants to continuously resume a session from hibernate no matter how I shut it down. I think it started when I tried to hibernate my computer with the battery really low. Somehow it messed it up. In any case, it can't resume properly, but gets stuck somewhere in the middle (I think when it's trying to sort out the resume image). Each time I power it on I have to boot it, restart in the middle of the boot so the boot menu comes up as it starts up again, edit commands before boot and add the "noresume" option so it will boot up normally.

View 2 Replies View Related

Ubuntu :: Thinkpad - No Suspend / Hibernate Or Resume

May 9, 2010

I've got a Thinkpad X31 with ATI M6 Ly card. Since Karmic, and Lucid, I get no suspend/hibernate/resume. If/when I select resume or close the lid, Lucid goes through the suspend cycle, and for approximately half a second it actually seems to go into suspend, then the screen comes back on, black, but definitely on, and absolutely no response to any keyboard input - have to hard-shutdown by holding down the power button. I've read that the problem is with the Ubuntu kernel, and that installing/compiling 2.6.33 fixes the issue, but causes other ones.

View 4 Replies View Related

Slackware :: Resume After Hibernate - Current?

Oct 17, 2010

I'm using stock 32 bit current on a AAO D250 netbook. I'm running into a video issue after upgrade to the recent 2.6.35.7 kernel that doesn't exist after resume from suspend. The condition shows as a broken display that shows a black screen on the left with the KDE desktop partial exposed on the right side. Weird! My only fix so far is to blindly ctrl-alt-f6, login as root and reboot. The screen does not show the console screen during this reboot process

The pm-suspend logs show a clean hibernate and a clean thaw so that's no help. I've checked modprobe.d and don't have any alterations to any of the modules. The video module loaded is the intel_agp which sound right. I'm stumped at the moment.

View 14 Replies View Related

Ubuntu Networking :: No WiFi APs After Resume From Suspend / Hibernate

Aug 30, 2010

After I resume from hibernate with my cpu frequency manually set to the highest settings (2ghz) the network manager shows not wifi APs. "wlan0" shows under both ifconfig and iwconfig but "iwlist wlan0 scan" says no results. "sudo iwlist wlan0 scan" also says no results. I've tried rmmod then modprobe with no luck. Rebooting is the only way I can get WiFi working.

I can get wifi working again by:
- rebooting
- changing the cpu scaling to a lower setting then hibernate/resume
- changing the cpu scaling to a lower setting then 'sudo rmmod ath9k; sudo modprobe ath9k;'

I am using Ubuntu 10.04 with Atheros ar5008 (AR5BXB72) using ath9k drives
Code:
$ lspci |grep Atheros
0e:00.0 Network controller: Atheros Communications Inc. AR5008 Wireless Network Adapter (rev 01)
Code:
$ uname -r
2.6.32-24-generic

View 9 Replies View Related

Ubuntu :: Resume From Hibernate Stops In Half Of Process

Jul 9, 2011

I have problem with resuming after hibernate, it is about 50% chance that computer restart when I want resume, then it starts boot normally and all my work is lost.
Acer aspire 3820tg
Ubuntu 11.04
Builtin hibernate on partition
I try uswsusp s2disk ... on resume it always stops in half of process. I used mainly hibernate, but I'm lost now.

View 9 Replies View Related

Fedora Security :: Resume From Hibernate - Terminals Still Logged In?

Mar 12, 2010

I am pretty new to Linux, but this can't be the way the system is supposed to operate.

Fedora 12
KDE 4.4
kernel 2.6.32.9-70.fc12.i686
Toshiba satellite L305D

As of updating KDE to 4.4 and a kernel update from two weekends ago hibernate/resume works perfectly. The problem is I feel that all terminals should be locked/logged out automatically upon suspend/hibernate. Through bug reporting at KDE found that an additional setting is required in KDE to lock the desktop before suspend/hibernate. But any of my other terminals that are logged in remain logged in upon resume. Is there an additional setting that I have to flip to secure the terminals? Would this be considered a security hole? Is there anything short of me manually logging out that I can do to automate locking/logging my terminals?

View 1 Replies View Related

OpenSUSE Network :: No Internet After Resume From Hibernate Or Suspend?

Mar 13, 2011

The good news: 11.4 seems to have much better support for my radeon graphics driver which makes many of my workarounds for 11.3 unnecessary

The bad news: whereas previously for 11.2, 11.3 using traditional ifup meant that I could easily restore internet (either wlan0 or eth0) with ifdown/ifup now this seems to have no effect. I haven't investigated further yet since without internet on hibernate or suspend 11.4 is not my grub of choice at the moment

There seem to be quite a few glitches with the 'stable' release of 11.4 but this seems to be the main problem for me. (Minimizing the beta 4 Firefox windows closing them is another...)

View 4 Replies View Related

Software :: Tool For Auto Resume After Hibernate/standby?

Jan 28, 2010

I am looking for a tool in fedora which can hibernate/standby and also resume after a few seconds automatically with a command. If we have that option by default in fedora.

View 1 Replies View Related

CentOS 5 Hardware :: System Did Not Appear To Resume Correctly From Suspend / Hibernate

Feb 19, 2011

i dont know why my system dosnt resume from suspend sstate.i it goes in suspend state.it doesnt resume .i have to poweroff then restart it again.and when i get logged in it gives me Following Error: Resume problem: Your system did not appear to resume correctly from Suspend/Hibernate. This may be a driver problem or a hardware problem. Check the GNOME Power Manager Manual for common problems.

do you think it is because of batterry.i have a problem in my By Battery .IN DOS operating system.when i check my battery icon . A red Cross constantly blink on lower right side of the battery and it says (your Battery consider Replacing).i have notice one thing .And My battery timing hias become Decreased. Do you think this Resume problm is cause of battery problm.Or there is some problm in my Os software.

View 3 Replies View Related

Debian Configuration :: Squeeze: Suspend/hibernate Resume Fails With Radeon Graphics

Aug 6, 2010

I am running Squeeze on an older Compaq EVO laptop with radeon graphics.

A few months ago, after an upgrade, suspend and hibernate stopped working. The suspend or hibernate worked fine, but the resume just hung with a black screen. I finally got around to looking into it and found a workaround.

The workaround is to disable Kernel Mode Setting for the radeon. This can be done by adding the boot parameter "radeon.modeset=0" or by editing /etc/modprobe.d/radeon-kms.conf so that it includes the line "options radeon modeset=0".

If you are interested in the details, you can search for problem reports related to radeon kernel mode setting.

View 3 Replies View Related

General :: Can Hibernate / Reboot Instead Of Hibernate / Poweroff?

Apr 10, 2010

I'm using pm-hibernate, and would like to reboot the machine after it's done hibernating, rather than having the machine turn off.Is there a way to do this with pm-hibernate, or any other Linux hibernate thing?

View 2 Replies View Related

Ubuntu :: Suspend Or Hibernate / Computer Refuses To Go Into Hibernate Or Suspend?

Mar 16, 2010

Just got Ubuntu 9.10 and I'm liking it a lot, but my computer refuses to go into hibernate or suspend. I have a Dell M1530 but I don't really think it's a dell hardware issue because it's not just when I close the screen, it's also when I click suspend or hibernate from the menu.

View 2 Replies View Related

Ubuntu :: Can't Resume From Suspend?

Apr 6, 2010

My laptop won't resume after it suspends. It works fine under win 7 so it's not the hardware. The light says it's on and it's pretty much a blank screen. I'm not sure whether it's operational but the screen is off. It has exactly the same resault a waiting for the blank screen except it won't go back on.

View 9 Replies View Related

Ubuntu :: 10.04 Log Out When Resume From Suspend?

May 6, 2010

I've just upgraded from 9.10 to 10.04 via the upgrade manager. Prior to the upgrade I was able to suspend and hibernate without any problems. Now that I have upgraded to 10.04, I can suspend however when I resume I am back at the gdm login prompt, logging in again with a new session.Having just done another test whilst writing this, it actually appears that if I select suspend from the top right I am suspended and can resume my session. If I close the lid on my laptop (which is supposed to suspend) I am logged out and suspended.Also, Hibernate doesn't work as well - sometimes it never actually hibernates (just sits on a black screen) and sometimes it doesn't resume (it's never hibernated and resumed correctly since the upgrade)

View 9 Replies View Related

Ubuntu :: Can't Resume From Standby

Mar 5, 2011

i am running Ubuntu 10.10 i386 on my computer

and i put my computer to standby

but when i tried resuming i couldn't

i pressed EVERYTHING on my keyboard and i still couldn't resume so i eventually had to shutdown the computer and start it up again

View 6 Replies View Related

Ubuntu :: Karmic Hangs On The Resume

Jan 1, 2010

This issue happens on both my Dell D630 and my homebuilt desktop, so I'm pretty sure that its not a hardware issue. Both installs are clean new installs with encrypted home directories. Computers go to sleep just fine but when I wake them, karmic is unresponsive and stuck in IO wait for the majority of the time. How can I gather enough information to submit a useful bug report?

View 1 Replies View Related

Ubuntu :: Laptop Will Not Resume After Suspend

Apr 22, 2010

Whatever way I suspend my laptop (menu, keyboard shortcut, close lid), it seems to suspend just find (no panic lights, suspend LED indicator flashing as expected). However, when i try to resume, the laptop seems to begin the proper wakeup process (for example, the DVD-drive is tested), there's a lot of HDD activity for about 5 seconds, screen does not power on, and then the laptop just shuts off.

System setup:
lucid beta 2, fully updated (just check now)
LG E-500 laptop /w nvidia gforce mobile 8400G
bios version 1.17 from June 2007 (not sure this is important)

Things I tried:
* Completely remove anything to do with gpu drivers and installed nvidia-current driver.
* Suspend stress test described here. this didn't work at all. The first test failed (with ac adapter attached) and the second test suspended but didn't automatically resume (see "the behavior" above). Also, when I booted up again, no apport bug report is created. I tried both with rtc set to utc=yes and utc=no. with utc=yes, the second test did automatically resume, but the same problem happened (laptop shutdown while resuming).
* The debugging steps described here, but I couldn't get the "no_console_suspend" option to work. I tried adding both "no_console_suspend" and "no_console_suspend=1" (without quotes) to the boot script in the grub menu, but when I did pm-suspend in tty1, the laptop really did suspend. I would like to try to do this again if someone could explain how to add this option.

Notes:
* Not sure this is relevant, but when I boot up after a failed resume attempt, wireless network is disabled (this only happens after a failed resume!!!).
* I found a package called nvram-wakeup in synaptic that seems to be related to this. This package is not installed. Should I install it?
In case this is relevant, forgot to mention I'm running ubuntu in dual-boot along side windows7.

View 6 Replies View Related

Ubuntu :: Desktop Will Not Resume From Suspend 9.10 Or 10.04

Apr 25, 2010

I don't have any problems with 9.04 at all with suspend & resume just shutdown (wont power off usb saitek keyboard & razer mouse) but i don't care for that I prefer suspend & resume. However trying 9.10 suspend works while resume gets a black screen & locks up. Now on 10.04 it will suspend very fast but will not power up from resume keyboard & usb power is turned off thats what I can't figure out I have checked bios & changes settings after settings & nothing happens. I know in windows everything works but i do not want windows at all I prefer linux (ubuntu). In my asus eee pc 1001p suspend & resume works with both 9.10 & 10.04.

View 7 Replies View Related

Ubuntu Networking :: Wireless Won't Resume In 10.04

May 7, 2010

I've read many threads here on wireless problems in 10.04. I've got it updated as of this morning.

Symptom: wireless works perfectly - doesn't drop out and starts right up at boot. But if computer (Dell Latitude D505) goes to sleep, wireless won't resume. Network Manager shows wireless networking greyed out after waking.

Here's output that should be helpful:

xxx@xxx-laptop:~$ sudo lshw -C network
[sudo] password for xxx:
*-network:0
description: Network controller
product: BCM4309 802.11a/b/g

[Code]....

I've read in several other threads here that blacklisting the wireless driver file(s) may resolve the problem.

- What driver file(s) on the computer do I blacklist?

View 9 Replies View Related

Ubuntu :: Run A Script After RESUME [LUCID]?

May 15, 2010

here is my workaround on how to run a script after the PC resumes from suspend.

This is at least working on Lucid Lynx.

1. Have a look at folder /etc/pm/sleep.d/ - all scripts within this folder are automatically run as root-user after/before suspend or hibernate.

2. A script needs to look like this example:

Code:
#!/bin/bash
case "$1" in
hibernate|suspend)
ACTION BEFORE SUSPEND/HIBERNATE

[Code]....

View 9 Replies View Related

Ubuntu :: No Screen When Resume From Suspend?

May 21, 2010

When I close my laptop lid (it goes into suspend mode). When I open it again, I can't see anything but a black screen. I have to reset the computer manually to accessUbuntu again.On a related note probably.. for 'some' screensavers, when I click to re-access my desktop, the screensaver freezes, but I can't see the unlock dialogue. I can however still type my password and it will unlock, I just can't see what I'm doing

View 2 Replies View Related

Ubuntu :: Resume From Suspend Without Password?

May 29, 2010

in kubuntu how can i resume from suspend without password? it annoys the crap out of me i have been looking all over and cant find anything in settings to do this

View 3 Replies View Related

Ubuntu :: Crash On Resume From Hibernation

Jun 25, 2010

I am using uswsusp / s2disk and it hibernates fine. Then, on resume, it apparently completes the resume (reaches 100%) but it never progresses to the actual resumed system and gets stuck on this screen: Before upgrading from 9.04 to 10.04 it worked fine. It does not anymore.

View 1 Replies View Related

Ubuntu :: Resume Screen From Ssh That Was Started Without Ssh?

Jul 18, 2010

Like the subject says, I was at my server and logged in directly and started screen. I then started a command and detached the screen.I then logged in remotely through ssh thinking I could resume the screen but when I try "screen -r", it says not screens to resume. I see the screen process still running and when I do go back to the server directly (no ssh) I can resume the screen and things are running just fine.Anyone know how to resume a screen remotely that wasn't started remotely?

View 2 Replies View Related

Ubuntu :: Resume From Suspend Not Working 9.10?

Jul 31, 2010

Karmic 2.6.31-22-generic, Asus M3N78-EM, MCE remote with USB/IR dongle, latest Bios, Bios PM enable and set for suspend S3. IT will suspend but I need to depress case power button for it to resume. I want to use my remote control, I also can not get it to resume from Keyboard/mouse (See Note Below). Only suspend and power button work.

$ lsusb
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub

[code]....

View 1 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved