Ubuntu :: During Install Can Only See The 500gb HD And None Of The Other
Aug 12, 2010
I made a post about this issue a while back and it's still happening in 10.04 ubuntu, I have 4 disks 2x120gb 1x250gb and 1x500gb, during install I can only see the 500gb HD and none of the other, I get an LVM drive during install for 250gb but that's no good (see attachment)
Now if i run the install with "nodmraid" the raid goes away but it only sees the 500gb I can however see the other drives in GPartion but I cant install to it.
I get the exact same thing in fedora 13 however when I run the install with "nodmraid" I can see all the drives and install to it.
I did a backup and the files I got had a lock on them so i changed the permissions and deleted them somehow. Now I look at the harddrive and it says I only have 90GB left when I should have like 400. Whatsup with this???
I've got 1 * 250 and 2 * 500GB HDDs.I mounted the 250 as '/' and 1 * 500GB as '/home'. What should I mount the final 500GB as (and how do I mount it after I've now installed it). I only want the 500GB as general storage.Also is it worth repartitioning the 250 with a dedicated section for 'swap' etc?
I'm installing Fedora 11 onto 4 500GB HDs....and I want it to be a RD5.
What would be the best way to do this?
1 - software raid each 500GB into a RD5, then create a LVM boot/swap/and / partitions? Is it even possible to do this? And performance wise, is this ok?
2 - the first two 500GBs into a RD0 and load the OS onto this raid, create a RD0 onto the second two 500GB, then just use rsync to mirror the first RD0 onto the second RD0...which I know isn't REALLY a RAID, but will be more of a backup onto the second raid. This probably will show the best performance, but isn't a raid.
Because the /boot has to be on a mirror drive I think my options are pretty limited.
I would like to know if there's a way to copy my 500GB HDD data onto a 1TB HDD. Is there a quick way to do this?? Or will I have to install CENTOS on the 1TB HDD and then move the data across? Reason for doing this is because I am running out of disk space.
I installed CentOS on a IBM server. The server has 4 HDD of 537 GB each. On one HDD, OS is installed and i am creating a partition of 500GB on other HDD. The partition is created but whenever i am going to format it by using: mke2fs -j /dev/sdd or mounting it by using:mount -a Then, it returns an error "/dev/sdd is already mounted or busy".
I have appealed to anyone on this forum site for any help on installing Unbuntu 10.04.1 LTS on a MACBOOK PRO (Mid 2007 Model. Basically I've followed a few threads & posts on how to Quad boot a Macbook Pro & it seems pretty straight forward,however. Ubuntu is not playing ball for some reason?? The first attempt I tried I had the partitions as follows:
I am using a 500gb sata internal hard drive.
WIN 7 - 125gb STORAGE - 15gb WIN XP -125gb MAC OSX - 180gb FREE SPACE 50gb - Formatted DOS - Which would become the EXT4 & SWAP FILE partition. After following instructions: http://hydtechblog.com/2009/01/26/du...windows-vista/
I've have been playing around mounting ISO movies, and found that my external HDDs now won't mount. I run UBUNTU Lucid Lynx, and want to change distros, but need to put everything to my external drives before that change.
I am trying to format a usb attached 500gb sata hdd, I have tried all options CLI, KDE/GNOME partition managers but the format always fails. In /var/log/messages I get:
if the Iomega 500gb minimax external usb hard drive is compatible with Linux Ubuntu 10.10, and does anyone have an opinion of the drive. Would I have to reformat it to get it to work with Linux.
I purchased a Seagate Goflex 500GB external hard drive yesterday and tried to connect it with my Fedora machine. Unfortunately my machine could not mount the drive. I have never had such problems earlier with other USB drives.PLease, how to use this ext disk on the fedora machine.
How long does hardware Raid card (raid 1, 2 drives)take to mirror a 1 TB drive (500gb used)?Is there a general rule of thumb for this?4 hours? 12 hours? 24 hours?
I have two external hard drives. One is a 2.5" 80GB USB HDD and the other is a Seagate 3.5" USB 500GB HDD. Both hard drives are mounted properly and I can access the data on both hard drives. I can access the small 80GB HDD via ssh from another computer and delete files, but when I try to access the 500GB drive via ssh it says access denied. When I try to access it with root, I can access it but I cannot see any files listed.
Tried to install Gnome after the minimal server (console based) install.I would like to install a graphical GUI now What to do? wich packages? tried zypper gnome-desktop (or something similar) but it wasn't enough.
If I install the factory release now, can I easily convert my system to a normal 11.3 point release later, after 11.3 is out? If so, how would I do it? (11.2 has an issue that affects me. It's fixed in 11.3 already, so I have to use 11.3 if I'm going to use openSUSE.)
In /var/log/warn I can see :Code:Jul 18 19:29:41 Linux1 SuSEfirewall2: Warning: config 'vsftpd' not available I did install vsftpd, but I removed it and install pure-ftpd instead.
i have a backtrack install that i would like to keep while installing suse for an everyday OS; i start the install process but when it gets to partitioning the hard drive, it doesnt seem to recognize anything already being on there; it just gives me the setup for suse, ie: sda1 ext3 = OS sda2 or sda5 = swap. do i have to configure a partition scheme? i installed ubuntu on a desktop alongside windows very easily due to grub graphical install/partition; is there not a similar function for suse?
I have an apparently stable installation of Xubuntu that I've hand-tweaked in a few ways. I'd like to be able to reinstall this system verbatim on this machine should a disk crash happen, etc.Is there a "standard" method to create an install and/or total-backup CD that would be an instantiation of the currently-installed-and-modified system?
I am installing Ubuntu Server 10.10 on and old Dell Laptop. The network connection is an Xircom PCMCIA card.During install, the computer sees and interacts via the network just fine. For example, I can ping the gateway. Also, the command "lspcmcia" works and show the Xircom card.When I reboot, however, there is no network access, and the "lspcmcia" command is not there. When I try "lspcmcia" the OS helpfully tells me that I can "apt-get" pcmciautils, but, without network access, that fails.I tried adding the install cdrom to apt using "apt-cdrom" and then tried to "apt-get" pcmciautils and it got further, installing some dependencies, but acted like it still was unable to locate the pcmciautils package.
Trying to install Ubuntu (tried several releases) on HP Pavillion Pentium 4 Proccessor 515 2.93 Gig 1M L2 cache 533mhz 90nm . Have 1 gig ram and 1Tb hd. Hangs on initial install screen for ever. Tried versions from 8.10 (origional disk) to 11.01. Machine works perfectly on Windows XP but who wants that? The model is pavillion 1000 system number pl397aa.
I downloaded Ubuntu and burned it to a CD-There was no problem with that part. It starts to install asks about the partition then the keyboard. Then it just stops and does nothing.
I'm an OpenSuse user wanting to try something different.Ubuntu Studios caught my attention. I had a brief play with an older version a while ago and liked whatI saw.Im having problems installing though.I've downloaded the 32bit version from the studio website link, and burnt the DVD.However the install always fails at the same stage: Select and install software.The error message is not specific, and no more information is given other than the step has failed.Any ideas what could be causing this? Ive tried to burn the DVD several times, on 2 different machines, but no luck so far.
Installing Ubuntu 10.10 desktop.on a Highpoint rocketraid 2642.Installing Ubuntu, it does not find the drive?How do I install the drivers to install and boot after the installation from the raid drives?
I am on 10.10 using Gnome 2. When I go to install GIMP via Terminal, SPM or USC I get an error about not being able to install libpoppler-glib4. Odd thing is I have the updated version.
I am a rookie. Yesterday, I intended to install a dictionary with the command sudo apt-get install dict-xdict, but it turned out to fail with the error. Then, I quited with Ctrl+ c, and I did not care much till today because when I want install something else today, the error keeps coming out. Therefore, I think I would better remove dict-xdict first, so I use sudo apt-get remove dict-xdict, but the error still appears:
[Code]...
I have already tries sudo apt-get -f install dict-xdict and it doesn't work out. I am hoping to install some other applications now, but I have not idea what I could do to fix this problem or just circumvent it
Toward the end of installing Ubuntu 10.10 32bit (Alt CD) on my iMac 11,1, the installer asked me to type in the location for installing the grub boot loader.
I told it to use /dev/sda3 and it immediately failed. I'm still in the installer. Can anyone suggest a solution?
Here are my partitions on sda:
...from the shell in the installer, there is no grub.cfg in /target/boot/grub.
I'm trying to migrate from Ubuntu to OpenSUSE but for some reason I can't get the install to work. I've tried installing the GNOME live CD both from a CD and a USB but after I select installation it goes to the loading screen for a few seconds and then the screen goes black and it stays like that till I reboot. Is it a problem with my hardware or something or did something miss-write when I burned the CD/USB?
When I run it live, I see KDE4. When I install it off the same disk, it installs Gnome. I can't figure out how to install KDE4. I had no luck with apt-get install kde4 (E: Couldn't find package kde4), no luck with aptitude, no luck with Synaptic (The following packages have unresolved dependencis kdebase-runtime-bin-kde4).
