Ubuntu Installation :: Using A 500gb Sata Internal Hard Drive?
Sep 15, 2010
I have appealed to anyone on this forum site for any help on installing Unbuntu 10.04.1 LTS on a MACBOOK PRO (Mid 2007 Model. Basically I've followed a few threads & posts on how to Quad boot a Macbook Pro & it seems pretty straight forward,however. Ubuntu is not playing ball for some reason?? The first attempt I tried I had the partitions as follows:
I am using a 500gb sata internal hard drive.
WIN 7 - 125gb
STORAGE - 15gb
WIN XP -125gb
MAC OSX - 180gb
FREE SPACE 50gb - Formatted DOS - Which would become the EXT4 & SWAP FILE partition.
After following instructions:
http://hydtechblog.com/2009/01/26/du...windows-vista/
[Code]...
View 7 Replies
ADVERTISEMENT
May 28, 2011
ubuntu 8.04 server can not detect seagate sata hard drive 2tb or sata Lg dvdrw x22 sata drive .is it possible to install it without buying a pci ide sata card?is it possible to get a driver for sata driver and sata drive that can be recognise by ubunto 8.04 server ?or to get the files for 1.44 floppy diskdoes the late edition of unbutu recognise sate hdd and sata cdrw drive automaticly during the installation of the unbutu?
View 1 Replies
View Related
Nov 1, 2010
if the Iomega 500gb minimax external usb hard drive is compatible with Linux Ubuntu 10.10, and does anyone have an opinion of the drive. Would I have to reformat it to get it to work with Linux.
Tony044
DELL INSPIRON 6400 LAPTOP
RAM: 1gb
HDD: 1gb
OS: Linux Ubuntu 10.10
View 2 Replies
View Related
Apr 5, 2010
I have a Desktop system using the Intel DG45ID motherboard with integrated graphics. I can't install from the 9.10 LiveCD. It can't find the Hard drive which is on the chipset's SATA controller.However, I can install 9.04 just fine. I can even do the 9.10 upgrade without a problem.Does anyone know if this bug has been reported. I'm hoping 10.4 has this fixed. I'll test the beta to see
View 9 Replies
View Related
Jul 13, 2011
I purchased a Seagate Goflex 500GB external hard drive yesterday and tried to connect it with my Fedora machine. Unfortunately my machine could not mount the drive. I have never had such problems earlier with other USB drives.PLease, how to use this ext disk on the fedora machine.
View 7 Replies
View Related
Sep 26, 2010
I've just put together a new machine and as I expected, there are some issues with hardware. I've just tried to set up the installation of ubuntu, got to the partitioning section and only my external hard drive is being picked up. The internal hard drive is a 1TB SATA drive plugged into a 6GB/s DATA port on my m/b (Gigabyte GA-P55A-UD4 running Intel i5 760 processor). I'm probably going to try the alternate CD to see if that works, but does anyone know if this is a common problem for any of my hardware? (I did a google but couldn't find anything).
View 3 Replies
View Related
Feb 21, 2010
I have been trying to install Ubuntu on my main computer for some time. I think I have two problems: my hard drive and video card. I started with Ubuntu 9.04 but got nowhere. I am now trying Ubuntu 9.10 32 bit. I can at least use the live cd if I put the video on safe mode. Just in case you are wondering, I have tried other distros: Fedora, OpenSUSE, Slitaz, Wolvix, etc. Only Slitaz and Ubuntu 9.10 works on a live cd.
Information on my computer:
OS: Trying to install Ubuntu 9.10 32bit
Motherboard: ASUS M3A78
CPU: AMD Phenom 9500 Quad Core
Video Card: Galaxy Geforce 9500 GT 1GB 128 bit DDR2 (Nvidia) Hard Drive: Hitachi 1 TB Sata Drive 3 Gb/sec 7200 RPM Ram: 4 GB (I think, its been awhile since I built this thing) DVD Burner: LG I think I have two problems: the Sata Hard Drive and the Video Card. When I go to install it, I can get to the install menu but from there all I get is a blank screen. I have tried to put the video in safe mode then install it but I get the same result: a blank screen.
How do I know if Ubuntu recognize the Hard Drive and Video Card? I tried the mount command to see what it sees but I didn't notice any Sata Drives. I was told that I may have to do something with the kernel so it will recognize my Hard Drive. How would I do that?
I have been working on this for awhile now. On a side note, does it matter which Sata Plug the hard drive is on? Right now I have it on the 1st one but I would like to move it to the second one because I want a dual boot system. And yes I know I can use the same hard drive but I would like to keep them separated and use a switch to pick which OS system to use.
While running on the Live Cd, Ubuntu seems to know about my video card and ask to install some drivers but then it asked to be rebooted and it came back up not recognizing anything; video card and hard drive that is. On the live cd I ran the following commands: lswh, lspci, mount, and df. I am not too sure if they will show if the hard drive and the video card are working since I did them on the Live CD. Also on the lspci command, I did this after Ubuntu loaded the driver for the card.
[Code]...
View 9 Replies
View Related
Dec 27, 2010
i have a netbook compaq mini with a sata toshiba hard drive.XP was installed on this machine until the hard drive started to have bad blocks.Then i bought a mypassport500go to install f14 on it.It worked but know the sata hard drive is more and more faulty.When i try to boot f14 it displays :acpi : package has zero elements. So i cannot boot.I tryed rescuecd, does not work either.i tryed many kernel params to disable sata at boot but it seems to be builtin.there is no option in the bios to disable the hard drive.
View 8 Replies
View Related
Jan 25, 2010
I got a dell inspiron 1501 laptop with a 80Gb sata drive what is the best solution to add data storage space for someone that love to have multiples operating systems at hand Note: I use mostly linux so I won't need to change my laptop for many years maybe ...
View 2 Replies
View Related
Aug 24, 2009
I went through the Fedora 11 DVD setup process up to the partition screen, which does show my external SATA drive correct as; /dev/sda when connected by eSATA, but it shows the internal drive which is a standard IDE, as; /dev/sdf , when it should be as; sdb, why ? I did run that fdisk -l in a terminal from one of my other installed Linux, and it did show drives as correct, ( sda, sdb ). I think this may be a issue related to the digital media card reader built into this 2006 Gateway desktop computer being detected as drives like Windows does and assigns drive letters, or is this some bug in Fedora 11 ?
Disk /dev/sda: 250.0 GB, 250059350016 bytes
255 heads, 63 sectors/track, 30401 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes
Disk identifier: 0x826d56f6
Device Boot Start End Blocks Id System
/dev/sda1 * 1 26 208813+ 83 Linux
/dev/sda2 27 1958 15518790 83 Linux
[code]....
View 6 Replies
View Related
Jan 13, 2010
I am trying to format a usb attached 500gb sata hdd, I have tried all options CLI, KDE/GNOME partition managers but the format always fails. In /var/log/messages I get:
[Code]...
View 2 Replies
View Related
Aug 13, 2010
Can SATA 3 (SATA III) Hard disk be run on motherboard which only supports SATA II, except sacrificing the speed (throughput)?
View 2 Replies
View Related
Jan 16, 2010
I have 4 hard drives in my computer. 1 for may root and home partitions. 2 extras for storage and 1 for Windows. I have the hard drive with my root and home partitions set as the first hard drive in the bios. However, in the Ubuntu setup it isn't the first one in the list. I would have thought that the first drive would be get set to sda. That is not the case.
View 1 Replies
View Related
Jan 20, 2010
i currently try to mount 4 internal sata disks using hal on a server installation?
i did
apt-get install hal and copied a .fdi script to /usr/share/hal/fdi/policy/10osvendor/30-storage-all.fdi
as far is i understand now i need a hal/dbus client
gnome-volumen-manager seems to be one
apt-get install gnome-volume-manager
now im stuck there is no such executable like gnome-volumen-manager thus, how does it work? how can i start it? how do i know if and why the .fdi script works or fails?
since its a server edition and its purpose should be a very minimized server install i dont want a GUI like gnome fully installed
View 1 Replies
View Related
Aug 2, 2011
I have a number of drives that I am setting up for friends who wish to switch/alternate from Windoze. So far several completed. One particular drive is being a bit difficult. When checked on my system[10.10] by Sata/USB wire it reads OK and gives the following info. 200GB, 768kb used, file sys Ms-Dos
When installed on the Mobo as main drive and machine booted set to boot from HD it sometimes reports 'No Drive Found' Reset the BIOS to boot from CD and Load Ubuntu from DVD- it goes through load routine then reports 'Error- cannot Mount drive[or words to that effect] Tried installing frm CD/DVD drive to the disk via the SATA/USB wire But that failed also with CD Auto load error So the disk seems to need setting up in some way to suit Linux presumably just like FDisk in Dos/Windoze
View 8 Replies
View Related
Oct 20, 2009
I tried to load Red Hat Linux 4 on my PC, which has 945 MB, Core 2 Duo Processor, 2GB RAM, 250GB SATA HDD. But i couldnt do so as it did not detect the hard drive and was asking for drivers. I changed the SATA settings to Legacy but still it didnt recognise the HDD...I have Windows XP SP3 also installed on it.
View 2 Replies
View Related
Jun 1, 2010
Dear OpenSUSE experts: I am a dual boot computer: Win 7 64 bit and OpenSUSE 11.2 64 bit. This computer has 3 hard drives: SSD, 500GB sata II, 1 TB sata 3. SSD contains openSUSE 11.2 500GB sata II contains Win 7.
Win 7 sees the 500GB sata II drive and the 1 TB sata 3 drive. openSUSE sees the SSD drive and the 500GB windows drive. The Motherboard BIOS sees all 3 hard drives. Is it openSUSE not support sata 3 drive? Or do I have to install special driver for it to see it in OpenSUSE?
View 5 Replies
View Related
Jan 22, 2011
I have REHL 6 Desktop. I have a macbook pro 7,1 with nvidia graphics and (I believe)a nvidia sata controller. I have fedora currently installed with no problems during or after installation ( with a few drivers of of course).
When I boot with the disk i burned ( works on other computers) it comes up of a list of devices to select and when i select local CDROM or DVD it goes to select drivers. So, then I tried "burning" the installation files to an external hard drive then I used the DVD to boot and selected Hard Disk then selected SDB1 (path of external HD). With this method I get to the Graphic installation screen and can go to the part were it says custom partitioning. I select ok then it say the only disk that is available is SDB1 (EXTERNAL).
View 6 Replies
View Related
Feb 14, 2010
So when I booted my system up today my second internal hard drive which is formatted to ext4 failed to auto-mount for me(I have an fstab entry for it). When I I tried to manually mount it from terminal it failed and suggested I run dmesg | tail and here is the output from said command:
Code:
dmesg | tail
[ 292.424199] sd 2:0:0:0: [sdb] Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK
[code]....
View 7 Replies
View Related
May 16, 2011
I am running Windows XP on my PC. I installed a new SSD Drive, which is OCZ-VertexII 120GB. I would like to run Windows and Ubuntu 11.04. The Ubuntu 11.04 Live-DVD runs fine, but when I click on Install, I get to the Screen where it ask if I want to install Ubuntu Side by Side with Windows or want to replace Windows, Ubuntu does not recognize the second SSD-Drive. how to install Ubuntu onto the second SSD-Drive and install the Boot loader onto the First Hard-Drive?
View 2 Replies
View Related
Feb 28, 2009
I've just loaded Vector Linux on my computer (it's a Pentium 4/2ghz my father-in-law gave us). It seems to be working well, however, I have a second hard drive in addition to the boot drive. This drive is from a previous computer that ran Mandriva Linux, so I would imagive VL can read it. I can't seem to locate it anywhere using the gui. However, I checked the system settings window under "storage" and the drive shows up. It doesn't show up in the "devices" area of the system tray. I don't think I can navigate to the drive using the "file system" window either..Is there something I can do to -- one, find the drive; and two, add the drive to the devices window so I can mount it when I need to (or, preferably, keep it permantly mounted -- like on a mac or windows computer)?By the way, the drive was the boot drive for the Mandriva computer, but the jumper is currently set to "slave."
View 1 Replies
View Related
Apr 10, 2011
I'm trying to get my work's infrastructure built at home before I go up there and show the boss. It is as follows: VMware esxi installed on the server with:
Windows server 2008
Ubuntu 10.04 server
I've got VMware installed. And I have spent the past 7 hours trying to figure out how to manage it. I found out that vsphere has not nor will ever be supported for Linux; which was my first problem.
Second Problem So I had to dig around for a spare Windows 7 dvd. To my UN-surprise it blue screened before it even got to the Windows installer.
Third Problem So I dug around for my Windows XP disc. Wouldn't find my sata hard drive and I wasn't about to dig around for a floppy drive and disk, in order to install it.
Fourth Problem I remembered that I had a dual boot of Windows 7 downstairs and proceeded to download and install vsphere. It wouldn't install because of some updates that needed to be installed. I installed them and got vsphere installed as well. However upon connecting to my vmware esxi, there was yet another error that had to do with some update. I found out that the error had been existent since 2009 and for some reason NO ONE at VMware has fixed it....
View 4 Replies
View Related
Jul 14, 2011
when I load into Ubuntu 11.04 from my USB drive, why can't I access the files on my internal hard drive? I mount the drive but I cannot see any of the music, videos or documents contained on that drive (which is also an Ubuntu 11.04 drive). I was wondering so I could copy those files onto my external hard drive and reinstall since my Ubuntu crashed.
View 3 Replies
View Related
May 20, 2010
I recognize the obvious need to back up the contents and follow a certain duty of care before attempting to clone my failing pata 250g HD to a 1 tera byte sata. What problems if any could come up when cloning from a failing pata to a sata HD? I'd like to make the switch to sata for many reasons if possible. It is indicated that the HP d530 sff here supports both types.
View 2 Replies
View Related
Mar 6, 2011
I've been thinking of buying a new internal hard drive, mostly because my 40 GB drive is beginning to get a little crowded. I haven't bought a hard drive in many years, so I don't know what brands are currently reliable. Years ago, I heard that the larger drives were much less reliable, but in recent years I have heard that is no longer true, so that it is cost effective to get a larger drive.
View 14 Replies
View Related
Feb 14, 2010
So when I booted my system up today my second internal hard drive which is formatted to ext4 failed to auto-mount for me(I have an fstab entry for it). When I I tried to manually mount it from terminal it failed and suggested I run dmesg | tail and here is the output from said command:
Code:
dmesg | tail
[ 292.424199] sd 2:0:0:0: [sdb] Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK
[ 292.424208] end_request: I/O error, dev sdb, sector 65
[ 292.424456] EXT4-fs (sdb1): unable to read superblock
[ 298.348591] DRS: unkown mode,default use 11N 1S AP
[ 298.348602] DRS: unkown mode (SupRateLen=8, ExtRateLen=4, MCSSet[0]=0x0, MCSSet[1]=0x0)
[ 301.371878] ===>rt_ioctl_giwscan. 1(1) BSS returned, data->length = 80
[ 306.211535] sd 2:0:0:0: [sdb] Unhandled error code
[ 306.211543] sd 2:0:0:0: [sdb] Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK
[ 306.211552] end_request: I/O error, dev sdb, sector 65
[ 306.211581] EXT4-fs (sdb1): unable to read superblock
View 1 Replies
View Related
May 28, 2011
I have an internal hard drive which is NTFS that I have some of my windows stuff on.Ubuntu seems to mount it only after I choose to open it from the places menu.I would love it if it mounted automatically on startup but I can't work out how to do this
View 1 Replies
View Related
May 18, 2010
Is there a tool for Ubuntu that will detect whether I have a SATA or a PATA hard drive interface, even if there's no hard drive inserted?
View 3 Replies
View Related
Jun 13, 2010
I have an old computer that I want to turn in to a backup server. I was planning on using a 1 TB drive connected by a SATA card since the motherboard only has PATA. However when looking everything I've found makes it sound like I need to install the card for it to work. I want to know if I can install Debian to the hard drive through the SATA card or not?
View 6 Replies
View Related
Apr 30, 2011
Recently i bought an external HDD, and unfortunately my internal HDD is not working.
Instead of buying new internal HDD, can i make external HDD work as internal HDD.
View 6 Replies
View Related
