i was looking for a way to find out all subdomains of a domain and i have found dig.But it doesn't seam to work how i sow in those tutorials.this is what i get:
PHP Code:[code]....
Is there other way that i can find out all subdomains of a domain?
I have installed a Clearos box (believe this is based on redhat/centos)in our office as this is an easy setup to try and replace a windows box. We can add our windows pc so it as it acts like a domain controller.I would like to get a couple of Linux machine on the network such as Mint, Debian Lenny or ubuntu. The problem here is I need to find a way of getting these pc to as such login to the domain so they authenticating with the clearos box to login. Is there an easy way of doing this.
View 1 Replies View RelatedFor example, given the range:172.128.0.0 - 172.191.255.255I need to find some domain that resolves to an IP-adress within the range. Is it possible ? I'm using a Linux system.
View 3 Replies View RelatedI have ldap authentication working and the machine is joined to the domain, but I have to append the domain name to my login every time I log in. example: user@domain.I've been unable to find away to log in without appending the domain name to the username. Any ideas on how I can force the machine to automatically append the name for me?
View 2 Replies View RelatedI have a DNS server on my LAN at 192.168.140.25. Going by the example in the O'Reilly DNS and BIND book I bought, I set up the domain movie.edu and toystory.movie.edu. To my great surprise and delight, I can access toystory.movie.edu in a browser from another PC on the LAN (as long as I add 192.168.140.25 to the DNS servers). Encouraged by this victory, I decided to try to set up another subdomain at coupon.movie.edu. This kind of worked but not completely. Interestingly, I can get to both toystory.movie.edu and coupon.movie.edu on my server, but on my PC, I can only get to toystory.movie.edu, not coupon.movie.edu.
Here is my db.movie.edu:
Code:
$TTL 3h
movie.edu. IN SOA toystory.movie.edu. al.movie.edu. (
1 ; Serial
3h ; Refresh after 3 hours
1h ; Retry after 1 hour
1w ; Expire after 1 week
1h ) ; Negative caching TTL of 1 hour
movie.edu. IN NS toystory.movie.edu.
movie.edu. IN NS coupon.movie.edu.
;
; Host addresses
;
localhost.movie.edu. IN A 127.0.0.1
toystory.movie.edu. IN A 192.168.140.25
coupon.movie.edu. IN A 192.168.140.25
And here is my named.conf:
Code:
options {
directory "/etc/bind";
};
zone "movie.edu" in {
type master;
file "db.movie.edu";
};
zone "140.168.192.in-addr.arpa" in {
type master;
file "db.192.168.140";
};
zone "0.0.127.in-addr.arpa" in {
type master;
file "db.127.0.0";
};
zone "." in {
type hint;
file "db.cache";
};
#include "/etc/bind/named.conf.options";
include "/etc/bind/named.conf.local";
#include "/etc/bind/named.conf.default-zones";
I'm doing development on a site, let's call it mysite.com. mysite.com and www.mysite.com works fine, but proxy.mysite.com and dev.mysite.com point to the LAMP stack running on my computer. Pinging mysite.com gives me:
Code:
64 bytes from server.myhost.com (64.64.0.102): icmp_req=1 ttl=47 time=47.4 ms
Whereas dev.mysite.com gives me:
Code:
64 bytes from localhost.localdomain (127.0.0.1): icmp_req=1 ttl=64 time=0.031 ms
Subdomains of any other site work fine. I am absolutely baffled. What in the world could be causing this? I haven't been messing around in /etc/hosts or anything like that.
I have set up a dedicated server running Ubuntu Server Edition. I have apache2 installed and running great. I wish to let friends and family host their individiual websites on it, but I'm running into a bit of a dillema. It seems that my server automatically redirects them to my home page and not theirs.
[code].....
I am trying to add subdomains on ubuntu 9.10 desktop edition and and I am not sure whether I need to add some info.(such as 127.0.0.1 sub1.example.com and so on) to the /etc/hosts file like the windows' windows/system32/drivers/etc/hosts file. I used to use the wamp-server(on Windows 7), I needed to edit 3 files, httpd.conf, httpd-vhosts.conf and hosts. And almost every edit is made in the httpd-vhosts.conf file on wamp-serveriles should be edited? or what else should be done that I didn't mention?
View 1 Replies View RelatedI am quite interested in one thing. I am trying to code my dns server that when I connect to one of my subdomains it connects not only to an ip address but to an ip : port address. For this I tried using SRV record, but with lack of success.
Dns server specification:
OS Ubuntu server 10.10 and using bind9
I have configured everything so that my subdomains work on an ip address, but I need some of them to work on ip : port too. In my brfconcept.lv.db file i used: (what I mentioned below isn't the full content of the file)
Code:
_http._udp IN SRV 0 5 27017 testing.brfconcept.lv
testing IN A 83.99.211.134
in my rev.0.168.192.in-addr.arpa i used: (what I mentioned below isn't the full content of the file)
Code:
134 IN PTR testing.brfconcept.lv
What I would want is not just for 1 service to aim at at the 27017 port but all services if its possible, when you enter testing.brfconcept.lv Is that possible and what am I doing wrong?
Here is my network setup:
Internet <-> [public IP] Router [192.168.x.x] <-> Local
Local <-> DMZ
Local <-> HostB
Local <-> HostC
I have a system set up as a DMZ which works great for accessing SSH and other various services. I have a dyndns account that points to my public IP and allows me to access my DMZ box from around the world. I would like to make a subdomain of my current dyndns account and point it to HostB so that it can host a webserver on it, and have another subdomain point to HostC with a separate webserver on it. each would have SSH, FTP, Etc and have to not conflict with one another behind one IP. I don't even know if it is possible, but it seems like if there is a request for dev.host.homelinux.com that packet would have to hit [URL]and could be iptable'd to be routed to the appropriate local machine somehow.
I work as webdeveloper and I and my co-workers have one rule - if we are done with any project, we comment them with underline at the end of the directory name. For example we have domain 'devel.domain.com' and our projects are located on projectname.devel.domain.com' . Commented project looks like thisAnd here is the problem. I can not acces subdomains ended with underline. It works last time in 9.10 (i think), but since 10.04 gives me the browser only SERVER NOT FOUND. We are using this comment-method for 7 years without problems. Why is this problem in last two editions of Ubuntu?note: there is no problem with accessing ended projects under windows or osx.
View 2 Replies View RelatedI am not using cpanel or anything, just SSH PuTTY client. my domain is [URL]now I want to craete a sub domain i.e [URL] , how will I create this ? so I can upload files to the sub domain
View 1 Replies View Relatedjust wanted to know how to add subdomains, how to add users to those subdomains to send and receive mail in fedora 13.
View 3 Replies View RelatedI have a DNS server on my LAN at 192.168.140.25. Going by the example in the O'Reilly DNS and BIND book I bought, I set up the domain movie.edu and [URL]. To my great surprise and delight, I can access toystory.movie.edu in a browser from another PC on the LAN (as long as I add 192.168.140.25 to the DNS servers). Encouraged by this victory, I decided to try to set up another subdomain at [URL].
This kind of worked but not completely. Interestingly, I can get to both [URL] and [URL] on my server, but on my PC, I can only get to [URL] not [URL]. Here is my db.movie.edu:
Code:
$TTL 3h
movie.edu. IN SOA toystory.movie.edu. al.movie.edu. (
1 ; Serial
3h ; Refresh after 3 hours
[code]....
I have a server with multiple domains and a DNS service (bind9) my main domain is registered with GoDaddy and it's A-record points to my server, it then has CNAME records with ns1 and ns2. I use ns1 and ns2 to point my other domains to the DNS server I host, which then manages what happens.
Anyway, what I would like to do is enable the DNS server to manage the subdomains on my main host. For example, if the domain was example.com and I use admin.example.com in the DNS server, it will not follow through unless I set the cname up, whereas my others will. How do I do a similar thing for my main domain.
I run my own DNS servers and host my own domains. I'd like to host a few subdomains of one of my domains on a server with a dynamic IP. Is there a way to do this? I *believe* that I can host one subdomain by using a CNAME record and a dynamic DNS service.
[code]....
How can I host more than one subdomain on a server with a dynamic IP address?
When I first encountered this problem, I though it would be a simple solution, but i must just be missing something obvious.i have a few name based hosts configured in apache.when i go to "www.adomainname.com" i get the first website on this list, not "adomainname.com", as i would like. Does anyone have any ideas on how to fix this?here is the relevant part of my config files:
Code:
<VirtualHost *:80>
DocumentRoot "/var/www/httest"
[code]....
I have working localhost on my Fedora 15. Directory tree look like this
Code:
/var/www/html/default
/var/www/html/projects
/projects/foo
/projects/bar
[code]....
I want to setup a mail virtualserver in apache so that a mail. subdomain whats pointed to the box will automatically goto my roundcube install. i have all of the document root stuff working, however, mail.* doesnt work for a server name.
View 1 Replies View Relatedi have registered two domain names that i want to use to connect to my ubuntu server. I was wondering how to do this i was looking at bind9 but that didn't work that great. The server is behind a router with firewall i can connect to it using the external IP address but i like to use the two domain names if that is possible.
View 3 Replies View RelatedAt work, we run Windows... Windows domain, windows workstations, etc. Today my boss asked me my thoughts on running an Ubuntu lab within the mixture of our existing Windows setup.
Well, that brought several questions to mind. So I understand you can bind an Ubuntu computer to a Windows domain, seems easy enough, whether you do it through Samba or the other guide I read that I kind of forget at the moment, but anyway...
I was just curious how Ubuntu interacts with domain users when on the windows domain. For example, if we have an Ubuntu machine on the Windows domain with a local user "administrator" and that's it, would any domain users be able to log into the Ubuntu work station, similar to how it is on Windows?
The company I work for, as usual, is Microsoft-centric. I'm attempting to integrate my Ubuntu server into the domain to allow domain users to authenticate to the server and access file shares using Samba. Here's my current configuration:
[Code].....
I was wondering if there is any way to enable an MS Windows client that is otherwise unable of joining a domain to join a domain controlled by (open)SUSE? Is that inability only for joining a Windows based domain but a client that runs XP Home Edition or similar domain- incapable version of Windows could join a domain if it was controlled by Linux?Pardon my newbie style, but answer doesn't have to be detailed step-by-step, just yes/no answer with some pointers would do. I am not new to linux but new to network services... search engines weren't friendly when asked this question at the search bar...
View 2 Replies View RelatedI want to give Administrator privileges to Root user in Linux Domain Controller
View 12 Replies View Relatediam using centos5.2.configured qmail,vpopmail. while adding domain form vadddomain<domain.co.in> At first time domain folder get created in domains directory.and also postmaster user also get created by default.And also in mysql. Now the problem is after some times or rebooting system domain get erased automatic.also in /var/qmail/users/assign file domain name get erased.
View 1 Replies View Relatedi had created domain but not getting domain in /var/qmail/user/assign file.also it error /home/vpopmail/bin/vdominfo abc.co.inInvalid domain name
View 2 Replies View RelatedI want to host 5 websites on my new virtual server so I have created 2 nameservers that point to my virtual server's IP addresses as a glue record. What confuses me is when I create a new domain on my server it gives the new domain it's own nameservers (ns1.thenewdomain.co.uk etc) do I need to change these records so they use the nameservers I created earlier? If I do? Which particular records should I change? I'm running a Unix virtual server with a Plesk control panel.
View 2 Replies View Relatedi need to allow window domain controller user to use file share of linux.windows DC user can see the share file and directories of linux file server but not able to access.
below is brief--
I have a Linux machine which is on my network but not on my domain. I have configured SAMBA FILESERVER for file sharing purpose. I have a Windows XP PC which is on the domain(windows server) that I am trying to connect to a share on the Linux box. I supply my credentials but regardless of which login I use I always get Logon Failure. I have created an account on the Linux machine with the same user name and password as my domain account but so far no luck. Can I connect from a domain PC to a non-domain Linux box? Is there something else I should be checking?
I'm working for a smallish non-profit that has gone through some recent growing pains. We have two sites that are currently without a domain controller, and no money for MS licenses, so I was thinking of trying to add a couple of additional Linux machines (we already run Linux for web services internally, and I've set up a test case previously to see if I could get a server to join the domain, which was a success) and was trying to find out if I can get them to act as Domain Controllers without replacing the domain. The main issue that I'm having at those locations is drive mappings are not happening correctly against our DFS file servers. The one other location that had this issue had it go away when we added a local DC. The domain is a Server 2008 domain.
View 2 Replies View RelatedMy customer has a domain hosted by me and he has another domain hosted by another isp. He would like to have this domain am hosted to be forwarded so thwt upon entering the url he should have the website which is hosted by this other ISP displayed (the url of the website be musked). How do i configure my DNS at achieve this?
View 1 Replies View Related