General :: Find A Way Of Getting These Pc To As Such Login To The Domain?
Jun 17, 2010
I have installed a Clearos box (believe this is based on redhat/centos)in our office as this is an easy setup to try and replace a windows box. We can add our windows pc so it as it acts like a domain controller.I would like to get a couple of Linux machine on the network such as Mint, Debian Lenny or ubuntu. The problem here is I need to find a way of getting these pc to as such login to the domain so they authenticating with the clearos box to login. Is there an easy way of doing this.
View 1 Replies
ADVERTISEMENT
Feb 12, 2010
For example, given the range:172.128.0.0 - 172.191.255.255I need to find some domain that resolves to an IP-adress within the range. Is it possible ? I'm using a Linux system.
View 3 Replies
View Related
Aug 17, 2009
I want to give Administrator privileges to Root user in Linux Domain Controller
View 12 Replies
View Related
Jun 4, 2011
I want to host 5 websites on my new virtual server so I have created 2 nameservers that point to my virtual server's IP addresses as a glue record. What confuses me is when I create a new domain on my server it gives the new domain it's own nameservers (ns1.thenewdomain.co.uk etc) do I need to change these records so they use the nameservers I created earlier? If I do? Which particular records should I change? I'm running a Unix virtual server with a Plesk control panel.
View 2 Replies
View Related
Jun 3, 2010
In my system , there are 800 users in it , can advise if I want to find the user(s) who do not have login to the sytem over 180 days ( in the past 180days ) , what is the best way ? thx
View 4 Replies
View Related
Mar 10, 2011
extracting a list of all vsftpd users with last login time.
ie,
USER NAME : LAST LOGIN TIME
View 1 Replies
View Related
Feb 21, 2010
i was looking for a way to find out all subdomains of a domain and i have found dig.But it doesn't seam to work how i sow in those tutorials.this is what i get:
PHP Code:[code]....
Is there other way that i can find out all subdomains of a domain?
View 1 Replies
View Related
Aug 6, 2010
I used Likewise (specifically, likewise-open-gui) to add my computer to the Windows domain at work. I can log into the computer with my domain credentials.
Until I reboot.
If the computer ever shuts down fully, I get an authentication failure when I log in using the domain account. But if I log in using a local account and run likewise-open-gui again from there, everything works. I don't have to rejoin the domain, only launch the program, close it, and log out of the local account. This seems to allow me to log into the domain afterward.
Is there something in specific that I can add to my startup scripts that will connect me to the domain before login?
View 4 Replies
View Related
May 21, 2011
I'm trying to integrate my Ubuntu PC into an Active Directory domain using Samba, Kerberos and Winbind. The task I'm trying to accomplish now is to automatically connect user folder from DFS server when domain user logs in. I created a simple (contains one line ) script to do that:
Code:
#!/bin/bash
mount //<server.domain>/Users$/$1 /media/dfs_user -o rw,user=<domain>\$1
I need to run this script with root privileges and parameter $(whoami) after domain user logs in so it results in command:
Code:
mount //<server.domain>/Users$/<username> /media/dfs_user -o rw,user=<domain><username>
What should I do? Is there any other better way (seems little unsecure like this)? I was thinking about adding this into /etc/fstab file, but don't know how to tell it what is the actual name of logged in user... I'm using Ubuntu 10.04 x32.
View 2 Replies
View Related
Jul 21, 2011
With Kerberos it's possible to join and login in Windows domain. The easiest way to do is this or I think so...
When installing likewise-open, it installs Kerberos also. I have no idea what are those realms and other stuff. There's some guides (also by Microsoft!), but it's gibberish for me. My native language isn't English, so half of those words go in one ear and out from the other.
I'm running Windows Server 2008 R2 Enterprise SP1 and I'm able to join the domain with my Windows clients. Now I want to join with Ubuntu but I have no idea what to do.
Like what's FQDN how to find out domain's FQDN Whats Kerberos realm and what it should contain how to install Kerberos correctly and so on
View 1 Replies
View Related
Sep 7, 2010
USE(SUSE 11 AS)system to existing windows 2003 domain...but now the problem is...i m not able to login using the domain users although i can see the users list if i run wbinfo -u
View 34 Replies
View Related
Jun 27, 2011
I joined my Ubuntu 1004 LST to Windows 2003 AD.
it always frozen my ssh login window when the DC crashes. when the DC crashes, the putty won't give me the password prompt and will go inactive directly after a while no matter what username(local or domain users) I give
is it possible to avoid to check domain users before it gives me the password prompt? or, we can make it to check if the user is a local user first?
View 2 Replies
View Related
Jul 15, 2010
I have set up Samba to act as a domain login for a Windows 7 PC. The Windows 7 PC has the two correct registry compat entries.
So, I've added "root" to smbpasswd and the Windows machine tries the "LINNIS" server. Authentication is successful, as stated in the Samba log but the Windows machine fails with the following:
"The specified computer account could not be found. Contact an administrator to verify the account is in the domain. If the account has been deleted, unjoin, reboot and rejoin the domain."
I feel like I'm doing something dumb, but the authentication passed so what is it talking about?
Slack 13.1 (Samba 3.5.x)
View 11 Replies
View Related
Apr 14, 2010
I planned to use Squid on my W2k3 network, because I'm tired of ISA2k6.it's a factory in itself. So, I just installed a VM with OpenSuse 11.2 and joined it to my AD W2k3 domain. After correcting the clock problems, everything is running fine except a strange feature that I was not able to solve.After a reboot, I'm not able to login with a domain account. I enter the username/password, choose the domain then it the input fields become grey for 1-2 seconds then the password field is reset and nothing happens.The most strange part comes when you logon with the local root account. You login as root, then logoff and login with any domain account : works like a charm..
View 3 Replies
View Related
Jun 3, 2011
I have installed OpenSUSE and could able to join to Windows 2008 domain but I am not able to login to SUSE system using domain ID. It is showing "Unable to authenticate user."
View 2 Replies
View Related
Apr 16, 2010
I have the following problem: I can't authorize with my central WinNT 4.0 domain controller. I set up all parameters in YaST, but still can't see any shares or get inet access.I am using gnome and it shows several windows workgroups. While I am trying to open it, gnome shows a window to request my login credentials. I am setting up all thing right and then it shows it again. I tried smbclient utility to login, but still can't login.What can I do about it?Also I have some problems with my http proxy: suse doesn't sent it my login/password while I can easily work with proxy, that doesn't request it
View 1 Replies
View Related
Apr 9, 2011
I joined my computer to a Samba directory and I would like to have that domain as default in the login screen rather than <LOCAL> but I cannot figure how to do it.
View 3 Replies
View Related
Jun 25, 2010
I have configured Samba+Ldap domain controller in 8.04 server.
In client side i have installed ubuntu 10.04 desktop. i have joined the client to server. i am able to login with domain user. but thunderbird 3.0 is not openning.
View 1 Replies
View Related
Jul 20, 2010
I've just rolled out about 60 ubuntu 10.04 desktops. All of them are joined to our windows domain using likewiseopen.
At the gnome login screen, the users have to click "other" and type in their windows username and password.
Is there any way to bypass this and just have the username displayed?
View 1 Replies
View Related
Dec 11, 2010
I did a fresh install of the netbook version of 10.10 on a Gateway CX2618. I ran all updates and then rebooted. I installed LWO 5.4 from the repository and joined the domain. I put in a kerberos realm (same as my domain) but I don't know for sure if I have a kerberos realm. I successfully joined the domain with the GUI. I rebooted, per instructions.
I tried to login with domain username and password (DOMAINusername). It takes a couple seconds to think and then kicks me right back to the GDM login screen. I have tried several times with the same login and have tried other domain users. It doesn't say "authentication failure" but I should have tried to use the wrong password to see if it would do the same.
I'm stumped. Is there a ppa I need to add? Is Likewise-Open supposed to work with the maverick netbook edition. I saw the previous notice on the Likewise site about OpenLDAP but I thought that was resolved in the updates and no longer in effect. Should I install LWO 6.0? If so, from where? From a ppa somewhere? From the Likewise site?
I can still login with a local admin account.
My ultimate goal is to automatically mount network windows shares for various students, based on their login credentials and using CIFS. I almost had this figured out before this fresh install.
View 8 Replies
View Related
Aug 26, 2010
I use OpenSuse 11.3 and I successfully built a samba/openldap server. However the raoming profiles were not working so I removed the roaming profile part of the samba and the openldap using ldap account manager. I also rejoined a couple of the computers back to the domain successfully (it was not an instaneous join, it took a good minute or 2 to join each pc). Now I cannot cannot login to any of these computers with the domain credentials. I can share using the UNC path no problem and this was working find about 1 week ago.
On 1 of the computers Iw as able to finally get a log file saying this:
View 2 Replies
View Related
Apr 1, 2010
I have Ubuntu Server installed in one machine and ubuntu desktop in 3 more machines. What I would like to have is, authenticate the clients using a central user DB and also the home folder for a user should be available in any client machine in which he logs. I see that openLDAP takes care of authenticating clients but what application to use to mount the user's home folder from the server to the client machine on logging.
View 2 Replies
View Related
May 7, 2010
I have a server x86 architecture and my problem is lost my username & password. Hope anyone can help about this matter as i need to log in to the server for maintenance purpose.
View 1 Replies
View Related
Jun 4, 2010
I have ldap authentication working and the machine is joined to the domain, but I have to append the domain name to my login every time I log in. example: user@domain.I've been unable to find away to log in without appending the domain name to the username. Any ideas on how I can force the machine to automatically append the name for me?
View 2 Replies
View Related
Nov 12, 2010
Have recently setup Samba on a fresh install of Fedora 14 so that I can use it as a workstation in a Windows 2003 (win2k3) domain.
The install of Samba seems to have worked as I can connect to the Domain using ADS and kerberos. selinux and firewall have been disabled until I have it working 100%
The problem lies when i try to login to Gnome or TTY. It begins to create the home directory for the domain user logging in but after a certain process Fedora logs the user out of the system.
Have looked through several log files (/var/log/messages, log.winbindd, log.winbindd-dc-connect) but am unable to debug it any further.
Have posted the config files below which shows the Fedora machine is successfully connected to the domain as it lists its groups, users and validates logon credentials - it just won't logon!
Where i can go about debugging. Also if you need additional configs.
View 1 Replies
View Related
Oct 25, 2010
When i try to login with AD credentials on Ubuntu 10.10 and the user has is password almost expire, the gdm hang and display the message "your password will expire in ... days"
If i login with any other user without that restriction, it works flawless. does anyone know what configuration file i need to change to bypass that problem.
View 2 Replies
View Related
Sep 27, 2010
i have a windows domain and linux ftp server. OSs windows 2003 server and centos 5.5. i would like to integrate this file server to windows domain. And would authenticate users from windows domain.
View 4 Replies
View Related
Jun 9, 2010
I was wondering if there is any way to enable an MS Windows client that is otherwise unable of joining a domain to join a domain controlled by (open)SUSE? Is that inability only for joining a Windows based domain but a client that runs XP Home Edition or similar domain- incapable version of Windows could join a domain if it was controlled by Linux?Pardon my newbie style, but answer doesn't have to be detailed step-by-step, just yes/no answer with some pointers would do. I am not new to linux but new to network services... search engines weren't friendly when asked this question at the search bar...
View 2 Replies
View Related
Apr 12, 2011
iam using centos5.2.configured qmail,vpopmail. while adding domain form vadddomain<domain.co.in> At first time domain folder get created in domains directory.and also postmaster user also get created by default.And also in mysql. Now the problem is after some times or rebooting system domain get erased automatic.also in /var/qmail/users/assign file domain name get erased.
View 1 Replies
View Related
Apr 7, 2011
i had created domain but not getting domain in /var/qmail/user/assign file.also it error /home/vpopmail/bin/vdominfo abc.co.inInvalid domain name
View 2 Replies
View Related
