Ubuntu Servers :: Vnc Doesn't Work Unless Monitor Is Connected

Feb 17, 2011

Last night I was able to set up my server so that I can just connect vnc. I even was able to be connected at the log on screen so I could select which user I wanted to log in at. For some reason today, I have to have the monitor plugged in all the until the logon screen comes up before vnc will connect. Once the logon screen is up, I then can connect via vnc & select which user I want to logon as. It's odd because it worked last nigh, but today - Nope nada, it doesn't work & I can't explain why. I did clean up - Removing some applications I don't need on my server. (I'm hoping that isn't the problem) It's odd as well because I don't have to be logged on as a user to connect via vnc, I just have to wait until the logon screen is available...Then I can unplugged the monitor & logon.

View 1 Replies


ADVERTISEMENT

Fedora :: Can't Get Monitor Which Is Connected To Nvidia Gt218 To Work Properly

Sep 6, 2011

I have 3 monitors and two video cards. In my ATI HD 6750 I have the DVI going to monitor one and the VGA for that card going to monitor 2.

[burnyd@dynamips ~]$ lspci | grep VGA
01:00.0 VGA compatible controller: ATI Technologies Inc RV710 [Radeon HD 4350]
03:00.0 VGA compatible controller: nVidia Corporation GT218 [ION] (rev a2)

The second card (Nvidia GT218) I have the DVI connection going to monitor three Monitor one and two for the ATI work perfect but I cannot get monitor three which is connected to the nvidia gt218 to work properly. I tried editing my own xorg.conf file but that did not work, I have a windows 7 install on this box that works properly. I cant seem to make this work with the third monitor and the nvidia video card.

View 1 Replies View Related

Ubuntu :: Monitor Doesn't Work After Upgrade To 11.04

Apr 29, 2011

Before ubuntu can even boot I get this on my monitor Out of range set to 1280x1080 60Hz I get that a grub. I'm not even sure if ubuntu can even boot because my monitor won't let me see anything. I'm using the driver off the nvidia website, not the stock one that came with ubuntu.

View 1 Replies View Related

General :: Monitor Doesn't Work / Get That?

Feb 27, 2011

I've installed Linux suse 11.3 on my laptop, but the monitor doesn't work. my laptop is a VAIO one and it's graphic card is NVIDIA GEFORCE 310m, so
what should i do?

View 1 Replies View Related

Ubuntu Multimedia :: VGA Monitor Doesn't Work With Dongle

Feb 18, 2010

I am experiencing a strange problem. I have two vga monitors and a ATI Radeon HD 3300 embedded on my motherboard. My embedded graphics card has a vga and dvi output. When I plug my monitors in (one uses a dvi to vga dongle) only the one with out the dongle gets a signal. I can swap which monitor uses the dongle and still only the one that does not use the dongle gets a signal (both monitors work, only if they are not using a dongle). Both Ubuntu and Windows are having trouble displaying video, but no trouble detecting the monitors (display settings show both monitors but do not tell me good resolutions for them). My friend has a different dvi to vga dongle, his only has about half of the dvi pins while mine has all the pins. Could the problem be that my dongle has all the dvi pins

View 5 Replies View Related

Ubuntu Installation :: Monitor Doesn't Work After Upgrade?

Apr 29, 2011

Before ubuntu can even boot I get this on my monitor

Out of range Please set to 1280x1080 @ 60Hz

I get that a grub. I'm not even sure if ubuntu can even boot because my monitor won't let me see anything. I'm using the driver off the nvidia website, not the stock one that came with ubuntu.

View 2 Replies View Related

Ubuntu :: CPU Frequency Scaling Monitor Doesn't Work?

Jun 1, 2011

I have recently installed Ubuntu 11.04 on my PC with these configuration:CPU: AMD Athlon 7750 Black EditionRAM: 2GB 1066 MHzVGA: ATI Radeon HD 3200 (on AMD 780G)After I installed Natty Narwhal I felt that my CPU runs at the highest clock all the time (2.7GHz), even if I don't have any program run. I tried all settings for AMD Cool'n'Quiet from mainboard BIOS, but nothing's changed. I installed "CPU Frequency Scaling Monitor" to manually change CPU clock. It recognizes two clock for my CPU, 2.7GHz and 1.35Ghz plus 4 other options; Conservative, Ondemand, Performance and Powersave but the CPU indicator doesn't change on every option!

View 9 Replies View Related

OpenSUSE Multimedia :: External Monitor Doesn't Work?

Dec 21, 2009

I am using Open Suse 11.2 on my HP DV6 notebook. I am connecting my television to the notebook with a HDMI cable and the television is unable to find any signal. Am I missing anything here? Shouldn't it be simply connecting the HDMI cable finding the source channel on the television and then I get sound and picture..

View 3 Replies View Related

Ubuntu Installation :: Dual Monitor Setup Doesn't Work Anymore

May 1, 2010

It used to work perfectly on Ubuntu 9.10 but I get "input not supported" in the secondary monitor.

View 9 Replies View Related

Ubuntu Servers :: Ssh Doesn't Work From Internet

May 2, 2010

I can't connect to my ssh-server (on ubuntu 10.04) from any external address. The error in putty is "connection timed out". From my internal network, everything works fine, even if I select my external IP address and port in putty as the destination.

This is what I have done so far:

installed open ssh with the ubuntu server 10.04 cd
set up port forwarding (11041) in my router (seems to work ok, port is open according to "shields up")
configured ssh to use port 11041 in /etc/ssh/sshd_config
changed tcp and udp ssh port in /etc/services to 11041
enabled UFW and did sudo ufw allow ssh

[Code].....

View 4 Replies View Related

Ubuntu Servers :: Website Doesn't Work With Www

Nov 27, 2010

I have added a domain to my new vps account but i notice that the website doesn't work with www so how can i redirect www.example.com to example.com. (bind9, apache2, webmin, ubuntu server 10.04 lts)

View 9 Replies View Related

Ubuntu Servers :: VirtualHost, Doesn't Work When Use Www

May 19, 2011

Ive made a site on my Ubuntu server and link the folder where it is with VirtualHost. The problem is, when i place mypage.com works, when try www.mypage.com goes to the apache "It Works" page.

View 4 Replies View Related

Ubuntu Servers :: Tomcat Manager Doesn't Work?

Jul 31, 2010

I'm really new with Ubuntu and have the following problem:I installed successfully sun-java6-jdk using apt-get install sun-java6-jdk Then set up the JAVA_HOME environment variable to "/usr/lib/jvm/java-6-sun-1.6.0.20"

And then installed successfully tomcat6 using apt-get install tomcat6 apt-get install tomcat6-admin tomcat6-examples tomcat6-docs Everything seem to be right, when I try the browser with http://localhost:8080 return a webpage with "It works !" and other text

But, if I try http://localhost:8080/manager/html then returns 404 error, the error is something like "The required resource (manager/html) is not available" (that is my translation from the spanish text "El recurso requerido (/manager/html) no est disponible")

[Code]..

View 1 Replies View Related

Ubuntu Servers :: Vsftpd Doesn't Work Anymore

Nov 27, 2010

I recently installed vsftpd on my system and it was running fine for my system users. Now I wanted to add virtual users so I googled it, I found this tutorial: [URL]

I did what they've been saying over there but when I restarted the vsftpd I couldn't login with the virtual user and also not with the system user anymore. This is the error ( with the system user who could login before ):

Code:
Status:Verbinden met 109.230.234.21:21...
Status:Verbinding aangemaakt, welkomstbericht afwachten...
Antwoord:220 (vsFTPd 2.2.2)

[Code]...

View 9 Replies View Related

Ubuntu Servers :: Apache2 Alias Doesn't Work

Nov 29, 2010

I'm trying to set up 2 aliases with PHP files in it. But in both cases I get a 403 Forbidden error. This is what the /etc/apache2/conf.d/alias file looks like:

[Code]....

View 9 Replies View Related

Ubuntu Servers :: PHP Error Reporting Doesn't Work?

Apr 5, 2011

I am developing/testing a PHP app on my netbook. For some reason apache/php are returning nothing but a "500 internal server error" response when there is a problem with my php script. For example, if there is a semicolon or closing brace missing, it should cause the script to die with a hint about which line caused the script to stop working. Instead it displays nothing but a "500 internal server error" message.

View 5 Replies View Related

Ubuntu Servers :: VSFTPD With NIS Environment Doesn't Work?

Apr 11, 2011

I installed Ubuntu 10.04 64bit server on DELL R710 server recently.

The basic:
[System Model] --- PowerEdge R710
[Ubuntu] ---
root@pek-mcbuild2:~# cat /proc/version
Linux version 2.6.32-21-generic (buildd@yellow) (gcc version 4.4.3 (Ubuntu 4.4.3-4ubuntu5) ) #32-Ubuntu SMP Fri Apr 16 08:09:38 UTC 2010
root@pek-mcbuild2:~# uname -ar

[Code]...

View 1 Replies View Related

Ubuntu Servers :: Software RAID Doesn't Work?

Jul 2, 2011

I'm trying to put two identical disks in Raid 1 for a homeserver. I got Ubuntu 11.04 server 32 bits on a USB stick. Installated till partition menu. Now I get the question how I want to partition my disks. I choose manual, and two times entire disk, one for both. It looks like this:

(iPhone quality)

I go to configure software Raid, and select Raid 1, 2 active disks, 0 spare disks, and get this:

I can't choose the other 2TB partition. I think I have to configure Raid three times, one for each partition. Not?

I click the missing 2TB partition, and get this:

But I think there's no RAID device at all, I see this again when I go to Configure Software Raid, en try to delete a RAID device:

How do I get Disk 1 and Disk 2 together in Raid 1? [URL]

View 3 Replies View Related

Ubuntu Servers :: Cgi Doesn't Work With New Apache Site Configuration?

Mar 24, 2010

I installed apache on my local machine to test my sites. I have one problem:I created a new site configuration in /etc/apache2/sites-available and enabled it. The problem is that cgi is not working, it just prints the content of the files. (The default location for cgi, /usr/lib/cgi-bin works without problem.)Here is the content of the site configuration file:

Code:
<VirtualHost *site1:80>
ServerAdmin webmaster@localhost

[code]....

View 4 Replies View Related

Ubuntu Servers :: FA120 Doesn't Work - Works In Desktop

May 24, 2010

I recently moved from Ubuntu Desktop to Ubuntu Server. I have a Dell D600 acting as a three prong firewall. I use a Netgear FA120 USB NIC for the third prong. After converting to Server, the NIC detects as Eth1. I'm able to configure an IP, but the NIC never sends or receives packets. The same NIC works great in Ubuntu Desktop. Dmesg never shows the NIC being ready.

View 3 Replies View Related

Ubuntu Servers :: Phar Stream Wrappers Doesn't Work?

Oct 16, 2010

I have a problem with phar: simply, stream wrappers doens't work. I've followed all tutorials on php.net but the error is always the same. Maybe something wrong on my ubuntu server?

Quote:

Ubuntu 10.04.1 LTS / Apache/2.2.14 (Ubuntu)

Quote:

PHP 5.3.2-1ubuntu4.5 with Suhosin-Patch (cli) (built: Sep 17 2010 13:41:55)
Copyright (c) 1997-2009 The PHP Group
Zend Engine v2.3.0, Copyright (c) 1998-2010 Zend Technologies

[Code]....

View 4 Replies View Related

Ubuntu Servers :: Samba Folder Doesn't Work In Vista

Mar 27, 2011

I got ubuntu samba server on server 10.04 username:user1 , Home folder: /home/user1 This user connects from a macbook pro no problem. I followed the same steps to set up user2 username:user2 , Home folder: /home/user2 This user does not connect from windows vista. I have the correct ports open, 137-139 & 445, and can connect from the macintosh, but not vista. The error says that the username or password is in correct. If you need some log files or config files, just let me know where to go and they're all yours!

View 9 Replies View Related

Ubuntu Servers :: Lmsensors Snmp Doesn't Work After Dist-upgrade

May 5, 2010

I have a small problem with lmsensors and snmp since I upgraded my small server from 9.10 to 10.04. I use cacti to monitor my servers usage, disk space as well as temps and fans.
This was running very fine before the upgrade, but now I don't get data anymore from lmsensors. It seems that SNMP doesn't give this information as before. (Cacti log says: "No sensor data was returned from SNMP")

sensors give the following output:

Code:

w83627dhg-isa-0290
Adapter: ISA adapter
Vcore: +1.12 V (min = +0.00 V, max = +1.74 V)
AVCC: +3.41 V (min = +2.98 V, max = +3.63 V)

[code]....

View 3 Replies View Related

Ubuntu Servers :: Send Mail Doesn't Postfix SASL Work

Nov 27, 2010

I'm running a server with Ubuntu 10.04 and I have installed postfix and courier. The server can recieve mail and I can fetch them using POP, but when I try to send mail it doesn't work. Postfix itself can send email if i telnet from localhost and I am using my ISP as a relay because they block port 25. I'm using outlook 2007 on my client computer and it just says that the server rejects the login attempt and tells me to check my username and password. Postfix listens on port 12 as well because the client connection also has outgoing on port 25 blocked. I have tried to use telnet to connect to the server, and I can connect. This is what I get:

[Code]....

Now what? I've tried searching for the answer but all I can come up with is AUTH PLAIN or AUTH LOGIN, but I don't know what to type after that.

View 2 Replies View Related

Fedora Servers :: Can't Use Tftp \ Remotely It Doesn't Work?

Jul 29, 2009

Server: CentosClient: F11Remotely it doesn't work

Code:
tftp 10.0.0.2
tftp> status

[code]....

View 4 Replies View Related

Fedora Servers :: Sshd Within Xinetd Doesn't Work

Aug 21, 2010

I recently installed Fedora 13 on VMware 7 environment without X window. sshd did work fine, but when I tried to put it into xinetd, it doesn't work any more. Here is what I have done so far :

I stopped sshd. #service sshd stop

and I configured xinetd.conf like below.

Quote:

#
# This is the master xinetd configuration file. Settings in the
# default section will be inherited by all service configurations
# unless explicitly overridden in the service configuration. See
# xinetd.conf in the man pages for a more detailed explanation of
# these attributes.

[Code]....

I don't know what I did wrong with them. I configured xinetd.conf, and I made service configuration file 'ssh' in /etc/xinetd.d, and I restarted xinetd.

What am I supposed to do to make a life on my sshd within xinetd ?

View 1 Replies View Related

Ubuntu :: Xorg Doesn't Detect Monitor / Won't Display Higher Than 800x600 On A 1400x900 Monitor

Apr 3, 2010

I installed Karmic on an older PC I had laying around, and the only trouble I am having is with screen resolution. It uses an old ATI chipset (onboard) for video, and it doesn't seem to do EDID correctly, so I can't display anything higher than 800x600. I have tried creating an xorg.conf, but it's still not working. How can I tell Xorg to ignore the fact it can't detect a widescreen monitor and display something larger than 800x600? I noticed the log says the sync's are out of range, but I am not sure how to fix it.

Here is my current xorg.conf.

Code:
Section "ServerLayout"
Identifier "X.org Configured"
Screen 0 "Screen0" 0 0
InputDevice "Mouse0" "CorePointer"
InputDevice "Keyboard0" "CoreKeyboard"
EndSection

[Code]....

View 1 Replies View Related

Ubuntu Servers :: Created A New Virtual Host In Apache Using Webmin - Doesn't Work ?

Nov 14, 2010

I created a new virtual host in Apache using Webmin and am having trouble getting it to work. When I created it, I opted to create the config file as a "New file under virtual servers directory /etc/apache2/sites-available". So now I have a default config file /etc/apache2/sites-available/default and a new one created by Webmin at /etc/apache2/sites-available/webmin.1412323.conf. It seems like the settings in that new Webmin config file aren't being picked up by Apache -- when I try and browse to mywebsite.com it shows my root /var/www folder, not the subdirectory /var/www/mywebsite.

Is there a way I can tell Apache to include the new Webmin config file for the virtual host or should I just copy the directives into the default file at /etc/apache2/sites-available/default? It seems like Webmin should automatically configure Apache to work with any newly generated config files.

View 4 Replies View Related

Ubuntu Servers :: Bind9 Views - Reverse Lookup Zone Doesn't Work ?

Apr 1, 2011

I'm at a loss to why my reverse lookup zone doesn't work for me.I've got two views. One internal and one external. My domain is isp2.datornatverk.se. Public IP: 130.240.133.81.

dig -x @8.8.8.8 130.240.133.81

gives me:

;; Got answer:
;; ->>HEADER<<- opcode: QUERY, status: NXDOMAIN, id: 2917
;; flags: qr rd ra; QUERY: 1, ANSWER: 0, AUTHORITY: 1, ADDITIONAL: 0

I've set it up so that the internal subnets gets the domains resolved to the internal IP-addresses. When querying from external addresses I will get public IP.My named.conf.local file:

Code:
acl internals {
127.0.0.0/8;[code]..........

I don't know whether the views has messed something up. It worked before I added the views.

View 3 Replies View Related

Fedora Servers :: DYNDNS Changed Public Key - Now Scp Doesn't Work

Apr 9, 2010

A week ago or so neither ssh nor scp were working when attempting to connect to my on-campus computer from home. ssh was complainig about the key not matching and I figured out I could just delete the config file it was reading the (now old) key from and let it create a new one with the updated key upon prompting me whether or not to trust the remote host.

However, even though ssh is now working, I can no longer use scp. I issued scp -v and discovered a bunch of errors. scp prompts me for the remote password and even prints the message of the day on the remote computer but then just hangs and doesn't seem to be copying any files. I'm sure the issue is with the whole key change issue but I can't quite figure out why ssh would be working just fine and scp would be failing.

View 1 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved