Debian Hardware :: 8.0 Doesn't Detect Second Monitor
Apr 7, 2016
Debian Jessie does not detect one of my monitors (I have two) when I use the default drivers (nouveau) for my NVIDIA graphics card. It does work when I install the proprietary drivers, but then, after a couple of reboots, I get many problems (when I log in, it does not manage to load the desktop environment). I've tried this a couple of times unsuccessfully.
How to make the machine recognize the dual screen with the default drivers?
View 9 Replies
ADVERTISEMENT
Apr 3, 2010
I installed Karmic on an older PC I had laying around, and the only trouble I am having is with screen resolution. It uses an old ATI chipset (onboard) for video, and it doesn't seem to do EDID correctly, so I can't display anything higher than 800x600. I have tried creating an xorg.conf, but it's still not working. How can I tell Xorg to ignore the fact it can't detect a widescreen monitor and display something larger than 800x600? I noticed the log says the sync's are out of range, but I am not sure how to fix it.
Here is my current xorg.conf.
Code:
Section "ServerLayout"
Identifier "X.org Configured"
Screen 0 "Screen0" 0 0
InputDevice "Mouse0" "CorePointer"
InputDevice "Keyboard0" "CoreKeyboard"
EndSection
[Code]....
View 1 Replies
View Related
Sep 14, 2010
I'm running 10.04 on a Radeon HD 4650 card with fglrx. The driver installation went without a hitch, and the log file contained no errors.
When I try to run
Code:
aticonfig --initial
i get the response
Code:
Found fglrx primary device section
Unable to find any supported Screen sections
Running
[Code]....
My best guess is that I have to write an Xorg.conf file, in which I say what type of monitor I have.
I cannot do that, as I need to shut down the Xserver in order to make it generate my xorg.conf file. When I shut it down I get the black screen.
View 3 Replies
View Related
Apr 25, 2011
When I'm connecting second monitor to the laptop, Display Settings applet (and xrandr -q) does not detect full list of supported resolutions. I need to restart my system or perform Log off while monitor is connected to make full list available.openSUSE 11.4 32 bit, Ati Mobility Radeon HD 3450, proprietary ATI driver 11.3 8.831.2-110308a-115935C-ATI.External monitor is FullHD SyncMaster B2330 (1920x1080)I wonder is there any other workaround to access full resolution that does not require restarting of the system?
View 7 Replies
View Related
Jan 29, 2016
I just switched from Ubuntu to Debian and I am having trouble doing something that I found easy to do with Ubuntu. I have a Radeon R9 graphics card from MSI with dual DVI ports and I'm trying to get xrandr/arandr to detect my dual monitors but it only detects one. I've installed all the drivers and even installed the "amdgpu" driver from the Ubuntu repository but still not detecting. What drivers am I missing?
View 1 Replies
View Related
Jan 11, 2011
I just purchased a Logitech ClearChat Comfort USB Headset. It works fine in Windows but unfortunately the same can't be said for Linux. It doesn't even seem to be detected as when I use the command cat /proc/bus/input/devices I get
I: Bus=0003 Vendor=0b38 Product=0003 Version=0110
N: Name="USB-compliant keyboard"
P: Phys=usb-0000:00:1d.2-1/input0
S: Sysfs=/devices/pci0000:00/0000:00:1d.2/usb8/8-1/8-1:1.0/input/input0
U: Uniq=
[Code]....
I checked Volume control and I have Headphone checked, and in switched Headphone is also checked. Actually... Maybe it is being detected... In the Device dropdown menu in Volume control I see "Logitech USB Headset". I checked that and the volume is turned up, speaker and microphone are selected in preferences... Sound is still coming out of my monitor's speakers though.
View 7 Replies
View Related
Apr 17, 2011
I downloaded this "debian-6.0.1a-amd64-netinst" iso image....But on the partitioning screen, after selecting the manual partitioning, it shows the whole hard disk without detecting the XP partitions.
View 2 Replies
View Related
Apr 12, 2010
I tried to do Debian netinstall from minimum iso image in my brother's pc. My Network Interface card is Intel 82578DC GIGABYTE Network Connection. The installer gives a list of drivers to install but I don't know what to do. Should I download and install from first CD/DVD? Will it have appropriate drivers then?
View 5 Replies
View Related
Apr 20, 2010
I am now using Ubuntu 9.10. The prob is I am not able to increase the resolution of display. It is showing only 800 x 600 display. While trying to increase the resolution it is showing "Unknown Monitor". So, how can I detect the monitor so I can increase the resolution of my system.
View 3 Replies
View Related
Dec 19, 2010
I am trying to install Debian Lenny (64 bit) on my brand new Toshiba laptop (intel i3, 3 GB RAM) and for some reason the installer cannot detect the ethernet card. This is the error message I get:"No Ethernet card was detected. If you know the name of the driver needed by your Ethernet card, you can select it from the list."And then there's a list which is quite long -- and I cannot replicate it here. But I want to know why the installer cannot find the ethernet card on its own or find the appropriate driver. In any case how can I fix this problem?
View 14 Replies
View Related
Jul 14, 2010
I just got myself a Dell Inspiron 1440. And decided to install my favorite distro Debian. I got the installation to go with no issue and all seems to be working fine. However the wireless isn't working. NetworkManager doesnt even detect a wireless card. I followed the instructions here and installed the b43-fwcutter and then issued the modprobe b43 and modprobe b43legacy commands. Then I issued the iwconfig command and this was the output.
[Code]...
View 8 Replies
View Related
Sep 7, 2010
I've installed Lenny with no problem, but I tried switching to Squeeze, and grub for some reason didn't pick up on the Windows partition this time - it just shows the two Linux options (debian and debian single-user). I check the menu.lst file (which I've edited under Lenny with no issues), but for some reason it doesn't exist at all in this install. Is it in a different location with Squeeze maybe?
why grub didn't pick up on my Windows install?
View 3 Replies
View Related
Jul 14, 2010
I just got myself a Dell Inspiron 1440. And decided to install my favorite distro Debian. I got the installation to go with no issue and all seems to be working fine. However the wireless isn't working. NetworkManager doesnt even detect a wireless card. I followed the instructions here and installed the b43-fwcutter and then issued the modprobe b43 and modprobe b43legacy commands. Then I issued the iwconfig command and this was the output.
[Code].....
Also, I've been doing some research and found out about some file located /etc/udev/rules.d/70-persistent-net.rules. So I looked in mine and found out that only my eth0 is added.
[Code].....
View 1 Replies
View Related
May 29, 2011
I've installed Squeeze 2.6.32-5-amd64 on my laptop (Alienware M17X R3, Intel i7 Sandybridge, ATI Technologies Inc Broadway [ATI Mobility Radeon HD 6800 Series])The screen is 17", with maximum resolution of 1920 x 1080. After a default install of the operating system, the maximum resolution I can select is 1280 x 1024.My research so far has suggested that I need to edit the /etc/X11/xorg.conf file and provide xorg with the necessary resolution.
Again, by default, the xorg.conf file is not created. This leads me to believe that xorg is scanning my hardware at startup and providing me with whatever it thinks is appropriate. I tried following these instructions to generate an xorg.conf file. This process created an xorg.conf file under /root/.
When I copy this xorg.conf file to /etc/X11, I get a blank (i.e. black) screen. Deleting this file restores the default resolution 1280 x 1024.This system is dual booting with Windows 7. Under windows I am able to get a 1920 x 1080 resolution, so I know my hardware is up to it.At this stage I have yet to install the drivers for the Radeon graphics card.What are my options regarding configuring xorg to give me a higher screen resolution?
View 6 Replies
View Related
Jan 12, 2010
Code...
To find the appropriate firmware without knowing the make or brand of your wireless chip, you can use the command:
#fw-detect
But apparently debian package do not offer this useful tool, well, certainly for sidux exclusively.
Is there a package of fw-detect eventually?
View 5 Replies
View Related
Oct 11, 2010
upgraded to ubuntu 10.10. now my monitor is not detected by the OS. tried pressing the detect monitors button but it does nothing and cannot change resolution(1024x768(4:3) or the refresh rate(currently at 0)?in 10.04, the monitor was called "dell 15"".
View 6 Replies
View Related
Sep 10, 2010
I run Fedora 13 in Oracle VM VirtualBox. Version 3.2.8 r64453
I did not realize that you had to install Guest Additions but after much reading I finally got it done. After I was done the max size I could go to was 1024x768. Using detect monitors I still get "Unknown" as a result.
I really don't know what else to try as I am not to proficient with the OS. I would like to run it at my monitors native resolution so I can have it on my other monitor. IE: Monitor 1-Vista. Monitor 2- F13
Monitor: Dell 1907FP native resolution. 1280x1024
Video Card: Dual Radeon 4800HD
I thought it might be something with the video card but I can not get the ati drivers to load at all. I have been unsuccessful finding drivers for the monitor.
Ok, so I got really bored and started trying it with other OS's. I installed Ubuntu and after I added the User Additions I was unable to get anything over 1024x768. Fedora is still stuck 1024x768. I also installed XP and it works like a champ.
View 2 Replies
View Related
Apr 28, 2011
I am using ubuntu 10.04 on a desktop PC. I have connected my 17" Dell LCD monitor with webcam (using the monitor's USB cable).
Ubuntu does not detect the webcam at all (I tried Skype and Cheese, both say no device found). (The monitor webcam works fine in Windows).
How do I make the webcam work?
View 1 Replies
View Related
Aug 29, 2010
I've got a headless server (32 bit 9.04/9.10, can't remember) that started refusing SSH and HTTP connections a few days ago, and I'm just getting around to hopefully fixing it. The problem is that I can't even connect to the darn thing. I've plugged in a mouse, keyboard, and monitor, but the monitor tells me that it has no signal. I know the monitor works with the computer, as I used the same one to set up the server.
Just for kicks, I even tried to put in a live CD, but that didn't help. Any ideas on how I can connect to this thing?
[Code]...
View 2 Replies
View Related
Jun 6, 2011
I occasionally connect my laptop to my TV and watch shows on the larger screen.After upgrading to 11.04, "Detect Monitors" no longer detects my TV. This worked in 10.10 and 10.04, and possibly in earlier versions.
View 1 Replies
View Related
Dec 27, 2010
This has been happening with the majority of screens I try to plug into, but the proprietary nvidia driver never detects the correct resolutions -__- the open-source driver works perfectly with a little xrandr magic, but I'd like to have some 3D acceleration going on. I'm using the desktop version of Nvidia ION and ubuntu 10.10, with the current nvidia driver (from the repositories). The native resolution is 1440x900 @60 Hz. Any thoughts on this? Again, the nouveau driver is great but I'd like to have VDPAU and the like working. code...
View 9 Replies
View Related
Feb 15, 2011
My brother got a new 120hz monitor, but can only get the old one to work. If he boots up with both of them connected in windows xp they work fine, but in Ubuntu 10 only the old one works. If he tries to detect the monitor in Display Preferences, nothing happens. The old monitor is connected to vga output (lcd with vga only) the new monitor is connected to dvi with a dual-link dvi cable. We know the graphics cards cannot provide 120hz, for now we run the monitor at 60hz until he upgrades the rest of the pc (sandy bridge i guess).The 120hz monitor worked fine until he changed graphics card from a ATI radeon 9200 to a geforce 3 ti 500.
He has tried
sudo dpkg-reconfigure xserver-xorg
and detect monitor in Display Preferences but no dice. Could he try restricted drivers?
System specs:
Ubuntu 10.04 32bit
athlon xp 1700mhz
1GB ram
ati radeon 9200
geforce 3 ti 500
lg w2363d
View 1 Replies
View Related
Apr 13, 2011
My netbook DOES seem to know when I plug in or remove an external monitor. Can I get it to simply auto-switch?
View 4 Replies
View Related
Aug 22, 2011
After installing Debian for the first time earlier today, I tried to setup my display for a 1440x900 resolution. However, the "Monitor Preferences" setting won't allow me to set a resolution higher than 1280x1024.
View 3 Replies
View Related
Feb 24, 2010
I have several RHEL 5 installed on ProLiant DL380, they all can't detect the CD/DVD hard dirve when i insert the CD. Do you now why is that, how can i fix it?
View 1 Replies
View Related
Apr 9, 2011
My little 40 GiBs hdd is kind of small by current standards. When I start running out of space, I always wondered what else I could do with those hundreds of music videos? Put 'em on dvd!
But 11.3 doesn't detect the dvd-rom, much less the disc. 11.4 did and the sound was much better than with my other Linux os. How can we fix this?
View 9 Replies
View Related
Jul 16, 2011
what will i do? so that i can install ubuntu on that partition?
View 2 Replies
View Related
Oct 16, 2010
I've installed Ubuntu 10.10 on my Macbook Pro 5,5. Everything is running fine with some tweaks. Just one thing bothers me: when I tell Nvidia X Server Settings that I want to use my external screen as primary screen it doesn't put the gnome panels to the other screen, well... sometimes it does after a couple times but most of the time it doesn't.is there a way to automatically detect when I connect a monitor instead of going to the Nvidia settings? Just the way Mac OS X does?
View 1 Replies
View Related
Jan 18, 2010
Upgraded my laptop from 2Gb to 4Gb RAM and ubuntu doesn't detect it. I've read all the posts on this issue and I have:
1) installed a PAE kernel and made it the boot option. Output from uname -a is: Linux tensor 2.6.31-17-generic-pae #54-Ubuntu SMP Thu Dec 10 17:23:29 UTC 2009 i686 GNU/Linux
2) removed all the non PAE kernels (a post I found mentioned this if the PAE kernel doesn't sort it out after a reboot)
3) tried to install the linux server image & headers but this didn't work. I later found articles discussing how you couldn't do this under Koala anyway.
[Code]...
View 7 Replies
View Related
Feb 20, 2010
I installed sun-java6-plugin and copied the symlink of /usr/lib/jvm/java-6-sun/jre/plugin/i386/ns7
[Code]...
View 2 Replies
View Related
