I am new to ubuntu, but recently learning a lot I from the past 2 days have been struggling to get my Wi-fi up and running, but there seems to be no success. I can't get the browser to open the ""Belkin Router"" Configuration page. I tried even reading the mannual but dosen't seem to work. I use a ""Belkin Basic N150"" router It is certainly not desinged for Ubuntu
View 2 RepliesFreeze browser wait for end of loading URL datausing Namoroka firefox 3.6.4pre Ubuntu/9.10 karmicproblem started app 2-3 weeks ago, same time working on JAVA update.JAVA test OK .most download locations seems to freeze or not complete loadingonly forced close/reset af browser is helping.how to find the change causing this?
View 1 Replies View RelatedI went to see if the iPhone was connected and it wasn't listed--and she was now on my wireless network, on the Internet. For the past month, I have experienced slow Internet (the Qwest people came over three times to fix the problem, to no avail.) And, when my laptop and desktop are turned off, the modem still shows activity, as if someone was downloading large files. Qwest insists that my network is secure and no one is using my network (and my house was built in 1997, so the wiring is fairly new and I have had NO issues with Internet/phone and had Qwest service longer than I can remember).
To make a long story short, I am concerned that my router has been hacked. I live in a rural area, so there's no teenagers or weird-o's around that I know of that would do that (unlike city/suburban areas)--and my Linksys router is "lying" to me, as my nephew was ON MY NETWORK and the SSID, MAC address and IP number was not listed on the LAN device list--only my laptop/desktop are listed, and she was happily checking emails on my network. I have changed my WPA2 password three times just in case, no fix.
Because of the configuration of my house, I need two routers.I have a DLink ADSL router as my main router and the Belkin N1 as my repeater.I have set up the IP address in the Belkin to be 10.1.1.10 - my DLink is 10.1.1.1. I have disable the dhcp in the Belkin and set the DNS as ISP provided. [URL]..I have set the channel to 11 and in the Ubuntu Network Manger I have set the IPV4 to Link Local Only. I can see the Belkin and connect with my PC.but it will not take me through to the internet.
View 9 Replies View Relatedi have a problem with my new router and ubuntu 10.10. The problem is that my internet connection show me that my laptop had connect to internet but my browser can't open a website ( this problem is the same with my netbook ) to fix it always must turn it off and after on either it never makes.
View 4 Replies View RelatedI've just installed Debian Squeeze from a live CD. When I open a web browser (be it iceweasel or epiphany) and try to go to google.com, it tells me it can't resolve the host name. [Edit: They do, however, allow me to go anywhere on debian.org, minus the search feature] I also get the same error when I try to go to my website running on a local server. However, when I type the server's IP address (192.168.0.10), it goes to the website fine. Basically, any program I run that needs to resolve a host name returns an error, with the exception of the host command:
I've tried changing my DNS server IP from 192.168.0.1 (my router, configured to provide DNS) to 192.168.1.254 (my internet modem, also configured to provide DNS). That didn't help any. Then I changed my DNS server IP to the same one used by the modem, and now everything works.
I've tried googling my way out of the issue, and I've found where someone had the same issue as I've got and fixed it by adding "blacklist ipv6" to their /etc/modprobe.d/blacklist.conf file, but that didn't work for me.
So, recap: Why does resolving domain names fail for certain applications (except the "host" program) when the DNS server IP is that of my router or modem (which works fine for all of my other computers), but suddenly works when I point the computer straight to my ISP's DNS servers, and how can I permanently fix the problem?
I have a new belkin N1 router which I tested in somebody else's flat. It worked fine. When I got home I reset it by pushing a paperclip in the hole for 10+ seconds to erase this flat's internet connection settings (username and password and stuff). After this I plugged it the computer and tried to connect to it (wired connection) using 192.168.2.1 (this is correct for that router, it is not 192.168.0.1). But the browser says it is offline and cannot connect. The lights of the router cycle, the "modem router" light blinks continuously and the others briefly come on and go off again, every few seconds. I tried resetting it again, several times, leaving it off for a few hours, leaving it on for a few hours, etc.
View 2 Replies View RelatedI have just installed 11.04 alongside windows vista. I have been trying to connect my router but it keeps saying disconnected from network. I have ran all of the troubleshooting tips in ubuntu its self and everthing seems in order. is there any settings i need to change on my router or in ubuntu's edit connections programe? I managed to connect to the router once to upgrade from 10.10 to the 11.04 but even before upgrading to 11.04 i had problems connecting to the router.
View 6 Replies View RelatedI joined this forum so I can say my experience with the crappy belkin N150 router. It appears you need to run the setup cd under windows to make the router 'see' the modem. Under linux as someone pointed out you can easily enter the router setup from a browser ( enter 192.168.2.1 ) and connect to the router only (wired or wireless connection) but not the internet. Does anyone have any idea what the windows setup is doing to connect the router to the modem and how to do it under linux in the browser?
View 9 Replies View RelatedHow do I get my ubuntu 9.04 computer to recognise the USB wireless stick and then connect to my wireless d_link router?
View 1 Replies View RelatedUbuntu 9.04.
Belkin Wireless G router.
Has been working fine. Today it is not. I have done nothing to it. It just keeps saying "Looking up *********" and "Cannot connect to server".
I hard wired the pc to the modem and it works fine. Hard wired the pc to the router it works fine. Running wireless, both of my computers are not connecting.
If I remember, one of the lights on the router should be lit solid, just as it is on the modem. However, all lights are blinking. The only solid light is "power".
Last night I jumped into the linux world and finally installed Ubuntu in a dual boot system with XP on board as well (eventually I want to get rid of this). How can I get my wireless Belkin F5D8233-4 router working. I put the install disk in and it shows on the desktop but unable to execute - keep getting an error message. Getting frustrated...
View 6 Replies View RelatedI have a old laptop Dell C600 PIII 800mhz 256mb RAM 20Gb HDD and a floppy drive. It has 1 USB port and no wifi card.
I bought the Belkin F6D4050 v1 usb wireless adapter so that I could use it on the above laptop and connect to my wireless network at home. The Belkin USB wireless adapter has a Ralink xchipset
There was no specific Linux driver available but a workaround for an old driver worked. Some changes to the code and compiling gets the wireless adapter to work.
I have installed Arch on the laptop. I compiled it and its working fine
Questions 1.Arch linux releases new image only once or twice a year I have downloaded the latest available arch image and built froms scratch. When I update Arch (as it is a rolling release) the kernel also gets updated and the compiled driver fails to work. I have to recompile again for the new kernel. Is there a way I can compile this driver in the existing Arch or any other distro kernel and use as long as I can without updating so I do not have to recompile again
I have a Belkin wireless router model F5D7234-4 version 5. I switched to DHCP long enough to access the router via Firefox browser and look at all the settings. I turned off all encryption and other security related functions in order to just get it going. The IP of the router is 192.168.2.1 which is the default for this router. It is set to channel 6. I can not ping the router from either of two machines using regular ethernet or wireless. I have very limited experience with routers and am in need of help so I can use this for wireless connection to my living room box to my laptop in the bedroom about 50 feet away.
I tried changing the gateway from the living room box IP number to the router IP number with no success. I don't have anything connected to the internet port on the router. The living room box and the laptop are connected to the ethernet ports on the router. Ethernet works fine. Wireless does not. I compiled and installed the drivers for my wireless card on the laptop, a Realtek 8176 which uses the kernel modules rtl8192ce, rtlwifi and mac80211. ifup wlan0 brings up the wlan interface with these modules loaded. Right now I just want to be able to ping the router using regular ethernet. That would tickle me pink at this point. I downloaded the manual but I just can't seem to make headway.
I have a newer Belkin N+ router that has a USB port for accessing an external hard drive.I can access the HD with no problem in Windows.I am new to Linux/Ubuntu and cant seem to connect to the HD. In "Network" I have a folder "Windows Share" and within that folder is where I see the HD "CBHD" (name of my drive). I cant click it because when I do, i get an error message along the lines of (cant remember exactly right now) "Failed to mound"I typically access the drive in Windows via : \192.168.2.1
View 1 Replies View RelatedI plan on installing a belkin wifi router. Is there any software to configure it ? also i need to increase the security as max as possible will my wifi be secure? only certain number of devices to access it also any software to display the number of devices accessing it like a radar? i am very fed up of all the command-line thinggy
View 1 Replies View RelatedYou'll need to reply like I'm an absolute idiot. I cannot get the stupid thing to work. WINE won't install, and I'm really confused on how to make it work. If anyone could please give me a step-by-step, that would be great.
View 1 Replies View RelatedDoes anyone have an opinion on the BELKIN F5Z0142uk Enhanced Wireless ADSL Router Network Kit, I want to setup a small home LAN and this kit caught my eye, it includes a usb Wi-Fi dongle for connectivity to a desktop computer, one of my pc's doesnt have a network card so this sounds like a good idea. Whats the build quality like and is it reliable. The link: [URL]
View 2 Replies View RelatedI have an external hard drive connected to my router. From Windows I can access it, but from Ubuntu I can see the hard drive, but when I try to access, I'm asked for a password. However my network does not have a password neither the hard drive.
What must I do?
I recently purchased a TPlink 5 port switch, which for some reason didnt work with windows, only my ubuntu computer, I found a cheap wireless belkin router which also has 4 wired ports. It now works well except that it is slow searching for new servers eg, going to facebook creates a long wait and can even time out but once on the website everything works fast, The connection is 2.89 Mbps which is good for this area and ping is 45ms. What could I do to fix this problem. This affect my ubuntu computer and the windows xp pc as well
View 2 Replies View RelatedI can view a php page only with links browser (a text browser) But when i use firefox i got an error "Content encoding error"
View 4 Replies View RelatedI can't log to any page using Lynx browser, what I see is "403 Forbidden" message everywhere. I think it has sth to do with User-Agent field, I tried both "Lynx..." and "L_y_n_x...", but also "Opera", "Mozilla" etc., but that doesn't help. It could also be related to cookies, but I accept all cookies the browser asks me.
View 2 Replies View RelatedI have created a php page with only
PHP Code:
<? php echo "OK"; ?>
in the code. When I go to that page in a browser, I get a blank page. Is that normal, or am I suppose to see the word "OK" displayed in a browser? When I became curious, I open up Wireshark to capture the packets, I see that my server is giving out a "HTTP/1.0 500 Internal Server Error".
Here's the entire tcp stream:
Code:
GET /services/test.php HTTP/1.1
Host: 192.168.1.5
User-Agent: Mozilla/5.0 (Windows; U; Windows NT 6.1; en-US; rv:1.9.2.3) Gecko/20100401 Firefox/3.6.3
Accept: text/html,application/xhtml+xml,application/xml;q=0.9,*/*;q=0.8
Accept-Language: en-us,en;q=0.5
Accept-Encoding: gzip,deflate
Accept-Charset: ISO-8859-1,utf-8;q=0.7,*;q=0.7 .....
I've installed CentOS 5.3+ xampp 1.7.2 (apache,proftpd and php5) +postgresql 8.4. And some strange errors appear from time to time, but can't reproduce it by wish. For example client opens a webpage on CentOS, the page can be open many times, but in some moment browser gives error as for non-existing page and when I check lampp's logs, there is only a record in error_log "[notice] child pid NNNN exit signal Segmentation fault (11)".
Or another example: client opens ssh-connection and ftp-connection. When ftp-connection got timed out and server closes it, ssh-connection unexpectedly gets closed the same moment without any errors in logs. And again it happens not everytime, but cannot be related to physical network because the same server on the same network with Fedora never had such errors. Possibly xampp-1.7.2 is not too compatible with CentOS 5.3? How to get more info from system in this case?
I'm looking at buying one of the above cards, and was wondering if anyone knew if they worked in master mode (e.g. as an access point). According to the Aircrack-ng site, they support packet injection and monitor mode. Is master mode support solely up to the driver used with the card, or does the card have to physically support it?
View 2 Replies View RelatedI have set up a LAN/WLAN, DDNS server, DCHP server, and a proxy/NAT server using Debian/GNU. Now I would like to redirect the host web browser to a welcome web page so the users of my network can read the terms of use and accept them before having access to the internet. Could some one help me to achieve this?
View 2 Replies View RelatedAs you've probably found out if you searched for this on Google, the new FAFSA page [URL] does not allow any Linux browser access to financial aid forms. The solution I found is to install User Agent Switcher for Firefox [URL] and restart the browser. Right click a toolbar, like the navigation toolbar near the back button, and click 'Customize'. Find the User Agent Switcher icon and drag it to the toolbar. Now you can change the browser's identity by clicking the little globe on the toolbar and select, for example, Internet Explorer 8. You should now be able to get beyond the first page of the new FAFSA website.
View 1 Replies View RelatedI have sendmail running on my centOS 4.6. My lamp server also runs on it. I want to send mail through php mail function. when i execute php page, which fires the mail function, it takes so much long tim1 say even 1 minute, and at last displays that message sent successfully. Suppose, destination address is [URL].... I did not get any mail there. My server is running in LAN. I checked the status of sendmail, it shows me that it ios running. when i issue "nmap localhost" it shows me that SMTP port 25 is open, but when i issue "nmap myserver" (192.168.1.20 myserver ( written in hostfile)), it does not show that SMTP port is open.
I checked the /var/log/maillog, one person in my previous post advice me to see that. There it shows that message is accepted for delivery...but i do not get any mail in my destination, even not in spam folder. One more confusion is that, in my case my server is in LAN and if I am at all enable to open the SMTP port on it, does i need to open SMTP port on my router (which connects my LAN to internet) also needs to open? I think no, because SMTP is application layer protocol, it will wrap my mail in IP packet, which router just need to forward. am i right?
Presently this client access the net through following setup
ADSL modem -> hub -> all computers
Now they want to do some kind of bandwidth control, content filtering. So I tried setting up squid with dansguardian. This is what I did
ADSL -> linux server -> all computers.
The linux server has two NIC cards. One to the ADSL router and another to the local hub. This is how my squid.conf file looks like
http_port 3128
acl ubc src 192.168.1.0/255.255.255.0 (for subnet)
http_access allow ubc
Have set the gateway server as 121.x.x.1. Which is the gateway server of the ISP. Now I can ping the local network, but cant ping the gateway or any other website. Also I am unable to access the router administration page.
I've moved a linuxbox from being my gateway (nat, etc) to behind a new gateway (a DD-wrt router). For transparency purposes, I'd like to continue using the old box services, and just have the gateway in front of it.
Here's what I did:
The newgateway is setup for class C, 192.168.0.0
This configuration works, but sometimes it doesn't and I haven't figured out why yet.
At sometimes, clients on the LAN get throughput rates with very little speed loss (using speakeasy speed test). They will run at 33M on the LAN, running through both the newgateway, and the oldbox, and get about 35M with directly connected to the cable modem.
Other times, it seems nothing can talk with anyone, and I am not sure why.
I know what I have done is a little unconventional, but it's a transitional thing, and I am not sure it is the cause of the problem, although it was the last things changed.