Software :: Fglrx & Debian Squeeze Not Letting Xorg Start?
Feb 16, 2010
A few days ago I ditched the user friendly world of Ubuntu and installed Debian Squeeze amd64 (testing) over it. I did not install the suggested Gnome 'X desktop' in favour of booting to the terminal and starting X once logged in as a user.
Everything was fine except for the fact Xvesa was used instead of Xorg as the system did not have the required Fglrx driver. I'm using an Acer ASPIRE 5536 with an ATI Radeon HD 3200 Graphics stuffed in it, which certainly beats intel GMA.
Unfortunately the drivers for it are proprietary.
On Ubuntu this was automatically detected and I was asked if I wanted to sell my soul and enable the restricted drivers. On debian however I have to download a shell-script of the ATI website to install the fglrx module.
Following this guide I downloaded the correct file (Under motherboard/something) and ran it as root.
I couldn't run it with any --buildpky Debian/XXX option, they all failed.
Code:
==================================================
ATI Technologies Linux Driver Installer/Packager
==================================================
Generating package: Debian/testing
cp: cannot stat `/root/fglrx-install.tCX8nC/x710_64a/*': No such file or directory
Package build failed!
[Code].....
View 5 Replies
ADVERTISEMENT
Jul 31, 2010
Here is my xorg.conf when I attempt to use fglrx:
Section "Device"
Identifier "ATI RADEON HD4850"
# Driver "ati"
Driver "fglrx"
EndSection
Also, doing /etc/init.d/start/ gdm3 says Starting GNOME display manager: gdm3 but it doesn't do anything. I tried pressing ctrl+f1 all the way to ctrl+f12 and nothing. What does work however is sudo gdm3 (with the "ati"/"radeon" driver --- nothing works at all with fglrx).
I am trying to get fglrx working because I want to fix this compiz issue I've been having here which could be related to the shortcomings of the "ati"/"radeon" driver: viewtopic.php?f=10&t=40991&p=312577#p312577
View 9 Replies
View Related
Jul 23, 2015
I cannot get my X working with fglrx.
Additional info:
Code: Select all# cat /etc/X11/xorg.conf.d/20-fglrx.conf
Section "Device"
  Identifier "Advanced Micro Devices, Inc. [AMD/ATI] Seymour [Radeon HD 6400M/7400M Series]"
  Driver "fglrx"
EndSection
[Code] ....
View 9 Replies
View Related
Jul 23, 2011
From the wiki page I know the ATI Mobility Radeon X1400 card is no longer supported by the new fglrx driver in squeeze. Is there a way to use the older driver from lenny? I'm on the radeon driver and the glxgrears performance is pretty low.
View 2 Replies
View Related
Nov 11, 2010
I recently installed Debian Squeeze on Acer Aspire 5542 , it has a Ati Radeon HD 4200 graphics card
I want to install the fglrx drivers , I apt-get install fglrx-driver, fglrx-glx & fglrx-control , The packages & dependencies download fine but when apt tries to install them the fglrx-modules-dkms fails .
The Kernel is 2.6.35.
View 2 Replies
View Related
Dec 17, 2010
I am trying to build the ATI fglrx 10.12 driver using the ATI installer on debian Squeeze 64bit.
Todo this I run the following command:
./ati-driver-installer-10-12-x86.x86_64.run --buildpkg Debian/testing
Which produces this output:
Created directory fglrx-install.oFbosX
Verifying archive integrity... All good.
Uncompressing ATI Catalyst(TM) Proprietary Driver-8.801
Generating package: Debian/testing
cp: cannot stat `/home/nojan/Downloads/fglrx-install.oFbosX/x710_64a/*': No such file or directory
Package build failed!
Package build utility output: .....
dh_install: Compatibility levels before 5 are deprecated.
cp: cannot stat `./usr/X11R6/lib64/modules/linux': No such file or directory
dh_install: cp -a ./usr/X11R6/lib64/modules/linux debian/fglrx-driver/usr/lib/xorg/modules/ returned exit code 1
make: *** [binary] Error 2
dpkg-buildpackage: error: debian/rules binary gave error exit status 2
Removing temporary directory: fglrx-install.oFbosX
As you can see it fails during the build.
View 10 Replies
View Related
May 27, 2010
From aptitude log
[UPGRADE] acpi 1.5-1 -> 1.5-2
[UPGRADE] acpid 1:2.0.4-1 -> 1:2.0.5-1
[UPGRADE] cron 3.0pl1-110 -> 3.0pl1-111
[UPGRADE] initscripts 2.87dsf-10 -> 2.88dsf-5
[UPGRADE] libavcodec52 5:0.5.1+svn20100427-0.0 -> 5:0.5.1+svn20100512-0.1
[UPGRADE] libavformat52 5:0.5.1+svn20100427-0.0 -> 5:0.5.1+svn20100512-0.1
[UPGRADE] libavutil50 5:0.5.1+svn20100427-0.0 -> 5:0.5.1+svn20100512-0.1
[UPGRADE] libcue1 1.3.0-1 -> 1.4.0-1
[UPGRADE] libpostproc51 5:0.5.1+svn20100427-0.0 -> 5:0.5.1+svn20100512-0.1
[UPGRADE] libswscale0 5:0.5.1+svn20100427-0.0 -> 5:0.5.1+svn20100512-0.1
[UPGRADE] sysv-rc 2.87dsf-10 -> 2.88dsf-5
[UPGRADE] sysvinit 2.87dsf-10 -> 2.88dsf-5
[UPGRADE] sysvinit-utils 2.87dsf-10 -> 2.88dsf-5
[UPGRADE] xserver-xorg-video-vesa 1:2.3.0-2 -> 1:2.3.0-3
I start my box from startx but after getting these updates, x tries to start, I see a mouse and a screen for a second and then it drops out again. I'm running the latest nvidia drivers from nvidia and have tried reinstalling them and they install fine, but no go.
Only thing I can find in xorg.log is:
(II) Power Button: Close
(II) UnloadModule: "evdev"
(II) Power Button: Close
(II) UnloadModule: "evdev"
(II) Logitech Logitech BT Mini-Receiver: Close
(II) UnloadModule: "evdev"
(II) Logitech Logitech BT Mini-Receiver: Close
(II) UnloadModule: "evdev"
(II) MLK wireless combo set: Close
(II) UnloadModule: "evdev"
(II) MLK wireless combo set: Close
(II) UnloadModule: "evdev"
(II) IR-receiver inside an USB DVB receiver: Close
(II) UnloadModule: "evdev"
(II) IR-receiver inside an USB DVB receiver: Close
(II) UnloadModule: "evdev"
(II) Macintosh mouse button emulation: Close
(II) UnloadModule: "evdev"
My xorg.conf file is void of anything related to input devices and has been working a treat. So it would seem one of these updates has screwed evdev. I've tried reverting back to earlier versions, but I get the same issues. I was running squeeze with kernel 2.6.32-4-amd64 when all this happened. It was running like a trooper. I've now tried 2.6.32-5-amd64 but still no go.
View 3 Replies
View Related
Feb 7, 2010
After going from Debian Lenny to squeeze, everything was going OK, apart from 8 broken packages of which I was easily able to fix 7 of the packages. The last one is x-org core, which comes up with the error message /var/cache/apt/archives/udev_150-2_i386.deb returned an error. From all my research it indicates that an update from kernel 2.6.26-2-686 to a later version is required due to 150 udev requiring the support of the CONFIG_SYSFS_DEPRECATED. My next question is where to start, do I need to add a linux-image repository in sources.list and then use the command-line or am I headed in the wrong direction.
View 3 Replies
View Related
Mar 23, 2010
I recently upgraded from lenny to squeeze and have subsequently lost system beeps in X. What I don't understand is, system beeping works properly in console, such as when I backspace an empty line or in tab completion, but in X terminals it does not. While in xterm I can do 'xkbbell' and get a bell / beep, but get no bell if I do 'tput bel' or 'echo -e 'a' ' or ^G.
pcspkr is loaded.
the 'pc speaker' volume is maxed and unmuted.
xset has bell volume at 100.
There was a bug in xorg that seemed to describe this problem really well a month or three ago [URL], but it appears to have been fixed as of version 1.7.0 (vs the 1.7.5 on my machine). There's been some talk recently of eliminating/disabling pc speaker beeps by default, but I'm not sure what came of it? Anyway, this issue is for me as irritating as it is minor, and failing a solution I'd at least like to know why.
EDIT: Can someone running Squeeze/2.6.32-3-686 and pcspkr loaded try and do a ctrl+g in a x terminal and tell me if you get beep
View 1 Replies
View Related
Apr 24, 2010
I just did a fresh install of Lucid, activated medibutnu repositories, installed libdvdcss2,w64codecs and it won't let me rip my DVD's.
View 9 Replies
View Related
May 15, 2010
I installed a new pc with testing debian. It says that the Xorg cannot start due to resolution and ddc. But where is gone the xorg.conf? there is nothing into /etc/X11 no /usr/share/X11 ...? What happens to that file?
View 6 Replies
View Related
Jan 21, 2010
I am trying to install xorg-driver-fglrx using apt--get but it return error which says btw i am using ubuntu8.10 Desktop distribution
Code:
root@VAIO:/home/miriyala# apt-get install xorg-driver-fglrx
Reading package lists... Done
Building dependency tree
Reading state information... Done
[Code]...
View 2 Replies
View Related
Feb 20, 2010
i was recently trying to run some opengl apps on ubuntu, and installed new drivers for intel. The problem is that now, every time it reaches login screen it crashes. I'd like to remove it, but i can't. Recovery console asks for root password. Is there a way to do it from a livecd?
View 1 Replies
View Related
Jun 19, 2010
I've just built a new system, the motherboard has an inbuilt ATI 4290 video (part of AMD GX890) and I'm using it with a Dell 2405 monitor. I've installed the latest Catalyst driver (10.6) from the AMD site, I can build the driver and X starts OK. The control panel for Catalyst says it will support 1920x1200 for a DVI connected screen - which mine is. When I start X it's always 1600x1200 and if I set the resolution via the Catalyst control panel, I get a display that has a black edge on the right of the monitor - about 1/4 of the screen.
At this point, I haven't tried setting any Modelines in xorg.conf as the fglrx driver is getting the information from the monitor via DDC and I'm assuming (probably a bad idea) that this data is correct.
Can anyone make any suggestions regarding this? Should I be setting Modelines regardless of what the driver gets from the monitor? Log files available if requested. Other that the 1600x1200 limitation, the system (AMD X6 1090t) runs very well.
View 3 Replies
View Related
Aug 4, 2011
I've been using Fedora 15 LXDE for a few weeks (its been great), and decided to install the ati proprietary drivers (I used the tutorial in one of the general strickies). As soon as I rebooted, I now get the following message:
Code:
Started SYSV: Late init script for live image... ATI external events daemon. into universal adresses I can type stuff using the cursor, but it doesn't do anything. I've tried adding 'runlevel 3' to the boot options in Grub to try and prevent fglrx conflicting with Xorg but it doesn't seem to work, unless I'm doing something wrong.
View 1 Replies
View Related
Feb 25, 2015
My hp does not want to start X for some reason. I have so many errors. I made an account to just see this problem be fixed. Now when I type "startx" I get back, "bash: /usr/bin/startx no such file in directory". I have to use GRUB due to the fact I forgot my login. Although, I do remember my password.
View 7 Replies
View Related
Oct 12, 2010
I just upgraded one of my non-mission-critical servers to squeeze just to see how it would go. Since the upgrade NFS is broken. When I try to start it I get:
Starting NFS kernel daemon: nfsdrpc.nfsd: unable to resolve ANYADDR:nfs to inet address: Servname not supported for ai_socktype
rpc.nfsd: unable to set any sockets for nfsd failed!
I've tried searching on those errors, but all I've found is that this has happened to others when no network interfaces are started; this is clearly not the case with this server, since other services are running and working on both interfaces.
View 1 Replies
View Related
Mar 5, 2011
After upgrading to squeeze I have now X Server 1.7.7 installed and it won't start.
When I try to run startx script, monitor gets blank for few seconds and then I get back to command prompt and no errors is displayed.
When I try the same as root, system locks up with blank screen and no functioning keyboard.
Initially I had kernel 2.6.28 which worked fine with earlier Lenny's X Server and Matrox P650 AGP video card. After upgrade I found, that Matrox P650 is not longer supported in new xorg and I swapped it to Matrox G550 AGP card.
Tried mga driver's many options, upgraded to kernel 2.6.37.2, tried with Matrox G200 PCI and Savage 4 Pro AGP card but without a success.
With kernel AGP support turned on I got both with Matrox G550 and Savage card an MTRR error: "error setting MTRR, Invalid argument (22)". Without AGP support in kernel, Matrox G550 gets initialised as PCI card and no errors and X still not working. Same with Matrox G200 PCI card.
With vesa driver the behavior is also the same and output at the end of Xorg.log file is almost the same.
So I understand, that this is some X server problem?
Nothing special in xorg.conf file and tried without it also.
End of the Xorg.0.log file:
>>
(II) MGA(0): YDstOrg is set to 0
(II) Loading sub module "fb"
(II) LoadModule: "fb"
(II) Loading /usr/lib/xorg/modules/libfb.so
[Code].....
View 6 Replies
View Related
Feb 11, 2011
I just upgraded to Debian 6.0 squeeze 32 bit XFCE from Ubuntu on my old Dell PC. Installation went well, however, i can't get into X windows after reboot, the screen just displays garbage
Specs:
Dell dimension 600Mhz/384M RAM/10G HDD
ATI RAGE pro 128
Any pointers on what should I do?
View 10 Replies
View Related
Oct 10, 2010
I just installed squeeze on a raid 1 set of partitions via netinst. gde works fine. I have installed kdm and all of its dependencies (I believe), but when I select it and log in, I see the kde startup screen for a moment, then it goes blank, and goes back to the login screen. My /var/log/kdm.log is:
[Code]....
View 3 Replies
View Related
Mar 2, 2011
I recently upgraded to the 2.6.35-27 kernel, but it seems that the X-server will always segfault if I try to load the ATI driver for it. If the ATI driver is turned off then nothing bad happens but then I'd be running without graphics acceleration.
I'm currently using ATI Mobility Radeon HD 5870. For now, to avoid this issue I'm still using the older 2.6.35-25 kernel, in which the driver seems to work just fine.
I wonder if there's anyone else having the same issue?
Crash log below, if you can find some useful info from it:
Code:
View 9 Replies
View Related
Feb 24, 2010
I'm trying to fix this problem: [URL] I have a problem with fglrx driver since Catalyst 9.9. After installation and reboot I get only black screen when X tries to start and keyboard doesn't work however when I press power button then the system shuts down properly after a while. I have noticed this for the first time on Hardy after installing Catalyst 9.9 and since then I have the same problem on Karmic and Catalyst 9.10/9.11 as well. I don't understand the bold text, What is this X he's talking about?
View 7 Replies
View Related
Apr 10, 2011
I am still running the linux-image-2.6.32-5-686 kernel a computer with squeeze. I installed squeeze on it when it was unstable. I would like to bring up to the new stable state.Should I do apt-get install linux-image-2.6.32-5-686or should Iapt-get dist-upgrade
View 1 Replies
View Related
Aug 15, 2011
this evening I updated my 11.4 via KpackageKit then logged out when I did Xorg died and I was dumped on the text console.
Looking in the logs I see
-- /var/log/messages
Aug 15 17:59:49 linux-vg3v acpid: 1 client rule loaded
Aug 15 17:59:49 linux-vg3v kernel: [22090.925299] NVRM: API mismatch: the client has the version 275.21, but
[Code]....
Unfortunately I didn't check the update list too closely. The above seems to indicate that an Xorg component was updated but the kernel module wasn't.
View 4 Replies
View Related
May 13, 2010
I'm running desktop Ubuntu 9.10 on my Dell laptop. Previously it was Ubuntu 9.04. After some period of time (lets say 3-4 months) my X fails to start automatically after some restart calls. If that takes place my network manager applet doesn't start either (after I do startx).
I get a perfect server boot meaning there's no Xorg started. Command line interface is all I get starting from login and further.
View 1 Replies
View Related
Jun 7, 2011
My PC running 11.04 was showing a blank screen after every 10 mins while watching BBC iplayer (with all the screensaver and power saver settings switched to over 1 hour). The picture returned when I moved the mouse but it was still annoying.
So I googled for a solution and found this page [URL]. Based on this, I did the following in terminal:
"sudo gedit /etc/X11/xorg.conf"
Then when the text editor came up, I deleted 'EndSection' from the xorg.conf file, and added the following lines:
Section "ServerFlags"
Option "blank time" "0"
Option "standby time" "0"
Option "suspend time" "0"
Option "off time" "0"
EndSection
My problem: upon rebooting the computer, I just got a purple screen with the Ubuntu logo, it went no further. I tried booting with the livecd and removing the lines I added, but it wouldn't let me save the file. I also tried booting into recovery mode but I'm not very adept at the command line navigation stuff, so I don't know how to find or re-edit the file.
View 9 Replies
View Related
Sep 25, 2010
I'm using slackware-current and I followed the instructions on how to upgrade the xorg-server from 1.7.7 to 1.8.1.
But when I tried to start X, there's the error:
Cannot find module "intel" (module requirement mismatch)
Cannot find module "vesa" (module requirement mismatch)
Cannot find module "fbdev" (module does not exist)
It looked like I have to recompile the whole X package,but I don't know how to recompile the package as well on which package to recompile.
View 3 Replies
View Related
Jan 20, 2010
I want to run some xulrunner based program on EC2 - it will run automatically but it needs some display as far as I understand. That probably requires X11 with some dummy screen driver.
View 3 Replies
View Related
Apr 19, 2010
/etc/init.d/xorg start : No such file or directoryWhen the server boots i get a blinking cursor.
View 2 Replies
View Related
Oct 28, 2010
I am running Debian 5.0.6 and trying to install an ATI FirePro V3750 graphics card. I am unable to compile the fglrx driver. if there is some way to manage to install the fglrx drivers.
cpus amd64 dual quads
motherboard tyan 2927
video ati V3750
kernel 2.6.26
headers and gcc fully installed.
View 1 Replies
View Related
