Ubuntu :: Install A Touch Screen Driver - Xorg.conf Location
Nov 10, 2010
I have a 3rd party driver that is trying to install a touch screen driver, it is looking in /etc/X11 for xorg.conf and it isnt there. The Ubuntu docs pointed me at a diff folder which also didn't contain xorg.conf. c is it located? I will just sym link it during install them remove the link once its done. EDIT: Should probably mention that I'm running ubuntu 10.10 (Which was upgraded from 10.04). And I'm running Desktop Edition
[Code]...
View 4 Replies
ADVERTISEMENT
Oct 31, 2010
Just a quick question - with 10.10 where do I save the Xorg.conf?
Is it :-
a) /etc/X11/
b) /usr/share/X11/
[code]....
View 2 Replies
View Related
Jan 26, 2011
I've read the how-tos (thank you oldcpu!) and wikis about how xorg.conf take precedence over the section configuration files in etc/X11/xorg.conf.d/, if it exist. I also understand that the xorg.conf can be partial. If it is missing some sections, these will be taken from the corresponding xorg.conf.d section config file. Currently I'm using a xorg.conf generated by nvidia-settings in one of my home machines, due to a dual-monitor setup. After generating xorg.conf, the device sections are:
in xorg.conf:
Code:
Section "Device"
Identifier "Device0"
Driver "nvidia"
[code]....
My question is if the Option "UseCompositeWrapper" "True" will be used or not. In other words, if a section exist in xorg.conf then it's correspondent in xorg.conf.d/ will be completely ignored *or* only the lines in xorg.conf.d/ that already exist in xorg.conf will be ignored?
View 5 Replies
View Related
May 26, 2010
i have VIA UniChrome Pro IGP grapgics. When i install linux max resolution 800x600@60hz and xorg.conf file are blank
some time ago i used fedora "xrandr" works great. But i don't liked fedora, as ubuntu
so i need program thats have option "Model"
Example: LCD 1028x768 or other
View 2 Replies
View Related
Dec 11, 2010
I've just done a fresh install of Lubuntu 10.10 on an older Sony Vaio laptop. Having learned the hard way about editing xorg files, I wanted to create a backup of the xorg.conf file so that I dont have to do another install when I screw everything up. In a terminal, I typed
[Code]....
View 8 Replies
View Related
Apr 9, 2010
I have installed Kubuntu 8.04.2 on a USB stick with persistence to keep any changes I make after a reboot and it works fine. I then installed the 185 Nvidia driver to give me higher resolutions and it works fine.
But each time I reboot, my updated xorg.conf is replaced with the default xorg.conf that ships with that version of Kubuntu and a backup is made of my updated xorg.conf (the correct one) which looks like xorg.conf.20100409135913. I have to put the backup xorg.conf back in place to get my Nvidia driver to work with the correct screen resolutions again. Otherwise my screen resolution is too low.
What could be causing this behavor? I'm sure it not the persistence feature of the USB stick failing since a backup is made of my original xorg.conf.
I might add more information. The xorg.conf that gets changed after a reboot says "This file was generated by dexconf, the Debian X Configuration tool, using # values from the debconf database." #
View 11 Replies
View Related
Feb 16, 2011
1. What is the difference between files (xorg.conf and xorg.conf-vesa)
2. No matter how hard I try I can't change keyboard layout in xorg.conf-vesa (I change it in file ) but there is no actually anything changing, it starts to get annoying - for example - below goes my xorg.conf-vesa, if I uncomment and set line from
[Code]...
View 3 Replies
View Related
Jul 24, 2011
Is it possible to add more than one graphic device driver to xorg.conf and it will load automatically? It is important to autodetect because I am using the configuraiton read only. This is because it's a custom LIVE CD.This is what I currently have, and it works!
Problem is if I put my Live CD in my brothers machine, it fails to load because it uses a Radeon driver!I can preinstall the ati packages I need, so all i need to know is how do I make it work?
View 1 Replies
View Related
May 3, 2010
I'm running the ubuntu based Green OS and cant get my video card properly configured. i've already gone through the forums to figure out what i need to do to get my ATI card working but my system wont let me access the xorg.conf file. i can see it using the the GOS file editor but it wont let me save the modifications. when i attempt to edit from a terminal window with su privelages it tells me that /etc/x11/xorg.conf does not exist. i've even tried booting into recovery mode and using the root instead of the sudo command. nothing i've tried will let me open the file.
View 3 Replies
View Related
Jun 13, 2010
I have a ATI Radeon HD 4000 PCIe card in my Debian system. I got the proprietary ATI drivers working (fglrx) but a kernel upgrade killed that. I was unhappy with this driver due to the very high memory usage. The card works with the non-proprietary drivers but I can only clone my desktop. I want a single desktop on two monitors.
I booted with Ubuntu Lucid and my dual monitor desktop worked out of the box without the proprietary drivers so I thought that I could emulate what Ubuntu does in Debian. But I can't.
My issue is that I don't know whether I am missing a module in the kernel or I need to set up a brand new xorg.conf. Ubuntu doesn't have an xorg.conf to copy. My default Debian doesn't either.
I have messed around with my own xorg.conf and added various drivers eg "ati" and "radeon" but I can't get it to work with a single desktop dual monitor display.
View 3 Replies
View Related
Apr 27, 2010
Pretty much what the title says.. a few more details:
- I installed 10.04 using the alternative install so I've been doing all this in safe mode
- I installed a newer kernel (2.6.33) and still black screen
- I tried to install an updated Intel xorg driver, but I kept getting dependency errors (xorg, x11, something else)
I read another thread on this forum from a user who is using the same platform (Intel HM55), and I got stuck at the last point (can't get Intel xorg driver to install).
View 4 Replies
View Related
Feb 12, 2010
I am looking for a generic vesa driver xorg.conf file that will work with most any 1024x768 monitor.
This is for a network appliance and our field people have many different type of monitors.
This product will mostly be used "headless" but sometimes our field people will plug in a monitor.
The intel driver will not even start x without a monitor plugged in so I found it necessary to go to the vesa driver.
Code:
View 1 Replies
View Related
Feb 13, 2010
I'm trying to get my screen resolution set in Mythbuntu 9.10, but there is no xorg.conf on my system! I'm trying to figure out what to do (the xfce tool on mythbuntu doesn't offer the correct resolution, and I'm not even sure what driver I'm using). I've seen other threads saying to run nvidia-setup or somesuch. I assume the appropriate tool in my case would be aticonfig (I saw that elsewhere too) as I'm using an ATI Radeon 9600XT, but that tool says:
Code:
aticonfig: No supported adapters detected
View 4 Replies
View Related
Aug 4, 2009
I am using Linux 2.6.29-020629-generic #020629 SMP Tue Mar 24 12:03:21 UTC 2009 i686 GNU/Linux ubuntu.
I have a widescreen lcd laptop and the current resolution is set at 1280x768 pls see output of xrandr here for more information [url]
I want to change the resolution to 1024x768. I can do in ubuntu' display tool. The problem is that once I change it, the output does not take up the whole screen it has blank spots on the left and right side
For a better understanding please have a look at [url] and [url]
In open suse the system sets it at 1024x768 without any blanks on the left and right corner. You can have a look at it here [url].
My current xorg.conf is details is at [url].
Please also find my xorg.0.log at [url]
The lcd does not have any controls to tweak.
View 3 Replies
View Related
Dec 11, 2009
monitor is a Optiquest Q19wb. I normally have is set on 1280x1024, but fedora will only go to 800x600. It has detected the monitor correctly. Not sure if being connected to KVM will cause issues. The xorg.conf does not exist. Have installed system-config-display but have not run yet.
View 1 Replies
View Related
Jun 18, 2010
I installed debian 5 in a pc with a Intel 4 series VGA. The optimal resolution for the monitor is 1360x76, but the system does not allow that. I tried to change my xorg.conf, but got no success.In my xorg.conf I used this:
Section "Screen"
Identifier "Default Screen"
Monitor "Configured Monitor"
[code]....
View 9 Replies
View Related
Mar 2, 2011
I have set up my Ubuntu virtual machine and am trying to adjust the screen resolution because it's stuck at 800x600 presently and there are no higher resolution options. I've looked at numerous similar forms and tutorials online and they all seem to involve editing /etc/X11/xorg.conf. However, for whatever reason, this file seems not to exist on my machine. I found another tutorial on how to add a screen resolution using xrandr --addmode which added the resolution I want to the list that appears when I type the command xrandr, but when I try to apply it I get an error about CRTC 262 failing.
View 8 Replies
View Related
Sep 24, 2010
I have Ubuntu (running Jolicloud) on my HP dv2000 laptop, connected to my Sony AV Receiver through HDMI to use the TV as an external monitor. However, the resolution seems to be slightly off as the outer edges of the screen are cut off. Is there a way to fix this by editing the xorg.conf file? My current setup is below. I tried adding the line "Virtual 1244 700" to the subsection "display", but when I restarted it threw me into low graphics mode. Is there anything else I can try?
I also tried setting up the resolution at 1920x1080 on the TV and kept the default resolution on the monitor as 1280x800, and as you would expect displays the entire desktop in a smaller version on part of the tv. However, the desktop is still offset, leaving the top and left margins cut off. So, perhaps I need a way to offset the screen? Is this possible in xorg.conf?
View 8 Replies
View Related
Jul 10, 2010
I've been using ubuntu on a new desktop for a couple of months, but i had an old HP that was given to me in my basement. It has 384Mb of ram, and thats because i had a 256Mb stick laying around. I installed debian becuase it is more suited for older hardware (at least from what I've read). It installed fine, but it boots to a blank screen, and pressing ctrl+alt+F2 bring me to the command line. I checked /etc/X11/xorg.conf to change the driver to vesa, to find out my video card isn't even shown. I ran lspci and I found that it says my graphics card is Intel Corporation 82810E DC-133 (CGC) Chipset graphics controller (rev3) In the device section of xorg.conf, it merly says Identifier"Configured Video Device"
View 12 Replies
View Related
Aug 4, 2010
Been trying to setup my xorg.conf file to have a 1920x1200 screen.Strange behavior: when my X starts up, I see my mouse cursor, can move it around. It's small enough to suggest the 1920x1200 resolution took, is working.However, the rest of the screen remains black. No login prompt.I've looked at /var/log/xorg.conf, no errors.Is there something else I can look at?
View 1 Replies
View Related
Dec 31, 2010
I have been working for a few days to try to get a PIX CIR touch screen working. I discovered what it was by running:
Code:
lsusb -v
and looking for the identifier
[code]....
View 2 Replies
View Related
Jan 18, 2010
Anyone experience with multiseat configuration in combination with openSUSE 11.2. Looking for a howto since we don't use xorg.conf to configure X and everything is autodetected by HAL.
View 1 Replies
View Related
Aug 29, 2011
I have the nVidia driver on my desktop kernel set-up but have to change /etc/X11/xorg.conf from nVidia to nv to get a X to run in Xen. Whilst this works, is there a way to tell Xen at boot time to use nv rather than nVidia so I don't have to edit xorg.conf each time?
View 2 Replies
View Related
May 22, 2011
I have used nVidia my entire linux life (about 5 years clean and sober from M$). Recently, I have switched over to an ATI Radeon HD 5550 card. After many trial and error setups, I finally got the resolutions and screens set properly with a xrandr command, which I have now added to a shell script in ~/.kde4/Autostart. It has worked for me for a while now, but I really would like to get it set in the xorg.conf.d files so that I don't have to wait that extra few seconds after login for the screens to fix themselves.
Is there an easy way to take what xrandr does and export it to the xorg.conf.d files? If my video card recognizes my default monitor as DFP2 and the tv that I only sometimes use with this computer as DFP1, how can I ensure that the login screen for openSUSE/KDE4 appears on my default screen (an issue that drove me nuts a few months ago when I tried Ubuntu to see what all the fuss was about)?
My xrandr command that I use to fix it all is:
xrandr --output DFP2 --auto --pos 0x0 --primary --output DFP1 --auto --right-of
I am using the proprietary Radeon driver from the ioda repository. DFP2 is a monitor which has a optimum resolution of 1920x1200, and DFP1 is an 1080p HDTV. I can not reverse the output plugs for the screens even though my monitor is an HDMI monitor because I use the actual HDMI port on the video card to output audio to the television and the other plug is a DVI that I convert to HDMI for the monitor.
View 1 Replies
View Related
Nov 1, 2010
Up through Slackware 13.0 I used xorg.conf without trouble. On Slackware 13.1 I am caught between two unacceptable alternatives. If I don't use xorg.conf at all I can't adjust the screen density between e.g., 640 x 480 and 1024 x 768 by hitting <ctl><alt>+ or <ctl<alt>- If I use the same xorg.conf that I have used for years I gain the above facility but when I go to a console session via <ctl><alt>F1 the monitor complains that it is being fed bad information. If I can't resolve this conflict I will have to retreat to Slackware 13.0.
View 2 Replies
View Related
Jan 16, 2010
I have an Asus z9100 laptop with an Intel 855GM integrated graphics chip, which is running Karmic (the purpose of the laptop is to be a MythTV frontend so my understanding is that it needs to run 9.x in order to connect to the MythTV 0.22 backend - I have installed and configured this using the installable Mythbuntu package) and the laptop is subject to this bug which causes random freezes:
[URL]
So, following advice for similar freezes I've seen, I have added the following options to my grub menu.lst on the kernel line:
nolapic nomodeset
and I have edited xorg.conf so that it makes use of the vesa driver instead of the Intel driver. This results in no freezes and if I wanted to watch Myth on the laptop screen I'd be squared away. However, the laptop has a damaged screen so the point was always to output the signal to an external monitor via its VGA out.
When I attach the external monitor and boot with the setup as described, the external monitor is never detected. But I noticed that if I remove the "nolapic nomodeset" from the kernel boot line, it is detected. However, signal is only output to it during the earliest part of boot (when the Ubuntu logo is in the center of the screen before the full-screen graphic with the animated progress line), after which the external monitor goes black and all the display output goes to the laptop screen. The external monitor power button is still lit up green as if it has been detected and is receiving signal, but it's just a black screen.
get the signal out to the external monitor after the initial part of the boot process, using the vesa driver? Here is the current state of my xorg.conf:
Code:
Section "Device"
Identifier "Configured Video Device"
Driver "vesa"
EndSection
[Code].....
View 2 Replies
View Related
Jul 15, 2010
Here goes the problem: I have a Amilo M7400 notebook with an Intel 82852/82855 GME video card, and X is a bit uncompatible with it.I've tried using the vesa driver in the xorg.conf, but when i start Xserver, it hangs hard in a blank screen. I can't open a new terminal and control+alt+backspace won't work.
what can i do? is there a log file for X which details the initialization of it?
View 8 Replies
View Related
Jan 21, 2010
I am trying to install xorg-driver-fglrx using apt--get but it return error which says btw i am using ubuntu8.10 Desktop distribution
Code:
root@VAIO:/home/miriyala# apt-get install xorg-driver-fglrx
Reading package lists... Done
Building dependency tree
Reading state information... Done
[Code]...
View 2 Replies
View Related
Jun 18, 2011
I found in my xorg.0.log the the xorg ATI driver is failing ALL options.
Code:
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 8.942] (WW) The directory "/usr/share/fonts/TTF/" does not exist.
[ 8.942] (WW) The directory "/usr/share/fonts/OTF/" does not exist.
[ 8.942] (WW) The directory "/usr/share/fonts/TTF/" does not exist.
[Code].....
View 9 Replies
View Related
May 12, 2009
I am wondering, what is the status of Intel GMA X4500 driver on Fedora 10.
View 2 Replies
View Related
