Ubuntu :: After Updates - Stayed To Black Screen Then Filled Up With Error Messages Like About Trace Call
Nov 5, 2010
Two days ago I downloaded and installed new updates after upgrading from 10.04 to 10.10. After the update I was informed I needed to restart. Once my laptop booted up again it stayed to a black screen and then filled up with error messages like something about trace call or call trace?
I had no way to get into my system but I did have some minor success starting in an old kernel. However after a while it would freeze like the graphics driver was going wrong.
Two attempt later of reinstalling 10.10 from disc after deleting the drive content and after updating it would go back to the same.
So I have now disabled updates as I haven't a clue on which one(s) is causing these problems.
I am on a HP Pavillion dv7 with nVidia graphics card and running 64amd Ubuntu.
View 1 Replies
ADVERTISEMENT
Mar 1, 2011
Why is it that I kept getting error messages that basically were saying that could not connect to the Ubuntu servers to do download of updates to Ubuntu that is until I switched to the MAIN ubuntu server at which point it worked fine.I tried several of the Ubuntu servers other than the MAIN server and kept getting error messages. Is there some problem with those other servers ?
View 1 Replies
View Related
Jan 20, 2010
I burnt the Ubuntu 9.10 ISO to CD and installed on a freshly nuked Dell 2350. It is pentium 4 at 1.8 MHZ with 512 RAM. Just a spare machine I have sitting there. Install went fine, restarted box, boot from hard drive. I get the little white Ubuntu symbol on a black screen and then a black screen with un-occupied white tool bars at top and bottom of screen and a functional mouse pointer, then nothing. It freezes there.
If I restart by holding the power switch in it occasionally shows multiple CPU overtemp messages and freezes with totally black screen. I can run the CD live and everything works like a champ. I'm going to like Ubuntu once I have this sorted out. If I boot from CD and choose the run from first hard drive option, everything loads and works fine. I was able to remove CD, update and save preferences, etc..
On one occasion, I was able to restart and boot from hard drive and it worked fine but usually it freezes at previously mentioned black screen with white bars top and bottom with mouse pointer. Please excuse my ignorance as I have very little knowledge of the inside workings of computers. I didn't even know about burning ISO's or changing boot orders until reading online. For what it's worth, the computer worked fine with no known hardware problems when it was running XP. It also is completely stock with no mods or added/replaced hardware.
View 4 Replies
View Related
Mar 25, 2010
As a newcomer to Linux I recently installed F12 (2.6.31.5-127) from a full installation DVD and all worked well until I decided to download a bunch of updates. When I next booted up I had a second kernel (2.6.32.9-70) and the usual other option for my XP dual boot (which still works!).Selecting either kernel leads to the Fedora logo on a blue screen and then a black screen with a small underscore cursor in the top left and no other text. This is not a command line or a text editor but it simply displays key depressions - the alpha/numeric section of the keyboard in upper and lower case as normal and then the function keys and numeric key pad as control codes commencing with As both kernels yield the same behaviour, am I right in assuming that it is one of the program updates that is causing the problem? The only way I have found to get out of this screen is ctrl.alt.del which gives a short list of programs being stopped and then the machine reboots. I don't know how to pause this screen to get the details before they disappear.I have been through loads of stuff on this forum but nothing seems to fit. From the command line terminal off the boot options screen I tried su -c yum clean all and also yum clean all but all I get from Grub is error 27 unrecognised command.
As you can tell I'm a complete beginner, but I am willing to learn. The thing is I don't know where to go from here. All I want for now is to get back to the Gnome environment I can handle, then I can explore the command line at my pace instead of being thrown in at the deep end!
View 5 Replies
View Related
Jun 16, 2010
I'm running Fedora 13 64 bit. Everything has worked fine, until today. The latest updates killed the video.
As the bar at the bottom of the screen starts to go across and say Fedora 13 the whole bar starts to flash then goes solid white. No errors or nothing, just a black screen. What causes this?
Nvidia drivers are installed. Maybe it's them. I've had trouble with video after updates with the last 4 versions of Fedora.
How to fix this mess?
View 10 Replies
View Related
Jan 4, 2010
I have an alienware m17 with an Ati graphics card. I was able to log on and install all current updates as well as the card driver update where I was then prompted to restart. Upon doing so, I get the grub loading plus splash screen. My screen then goes blank followed by a noise in my laptop. I have tried nomodeset as well as taking out splash nothing has worked. Also, upon booting up I get lucky if I can get into Recovery mode.
View 2 Replies
View Related
Jan 25, 2010
Everything went fine this morning on the Install. Then the box said there were 121 updates. I click YES to update. After an hr updates had finished, and reboot was necessary. Only a black screen came up. I have 2 lights on my keyboard blinking, no hard drive activity light. Waited several minutes, nothing. So I did a reboot back into my WinXP. Any suggestions?
View 2 Replies
View Related
Jun 20, 2010
After finally getting flash taken care of, now after reboot I have a black screen and this error:
Fatal Module - nouveau not found.
How do I get the video working again? What would the command be?
running Debian Squeeze 64bit. nvidia 6100
View 5 Replies
View Related
Jun 30, 2010
I've been able to print with other distros (Mint, Sabayon) without problem so I'm guessing the way my printer is configured with Slack must be wrong. My CX6600 is recognized and when I try to print, it responds, but by printing a page filled with black ink. I have tried printing in Okular, Firefox and OpenOffice with the same result.
View 1 Replies
View Related
Sep 25, 2010
When I do the routine updates, which come every few day, I get the following message.(Please see the attached image.)
View 3 Replies
View Related
Jul 8, 2011
where the printk messages are stored when we call a insmod? I'm using Slackware, and I think my distro can store these messages on others place.
View 3 Replies
View Related
Apr 27, 2011
This happened when I was trying to install Ubuntu 11.04 from a disc, when I boot from the USB or CD I create of Ubuntu it gets past the selection menu and then I get stuck at this screen, keyboard is completely frozen, no HDD activity light or anything. This happened the same way when trying to install Ubuntu 10.10 This is an ASUS g60jx laptop, I would have assumed this was fixed by now, is their a special graphic mode I have to enter when installing?
View 6 Replies
View Related
Nov 9, 2010
Just installed Debian 5 Lenny on my PC and found myself in front of strange problem: 3/4 of my screen is filled by graphics on default, i mean 1/4 of screen is just GREY on logon screen, and then when GNOME starts i got the lower pannel on the bottom of 3/4 of screen, but suddenly i can take it and put it on the bottom, like it should be.
same stuff with maximizng the windows. when i maximize by just pressing one of those right-top buttons - it just fills 3/4 of screen. but if i maximize it by hands at first and THEN press the button - everything feels great.
something inside me says that i should post xorg.conf
[Code].....
View 1 Replies
View Related
Mar 6, 2010
I was messing around with the screen orientation and thought it would be funny to orient it sideways. Big mistake The screen went black.I can force a shutdown, login and I get the same black screen. I tried hooking up an external monitor and the monitor showed no input so I'm guessing my laptop doesn't have that capability with Fedora.This is my main computer.
View 14 Replies
View Related
Apr 14, 2011
Ok so i have just searched and searched and i have minecraft on my cumputer and i run it and click run offline and it goes black and after about 5-10 seconds this error comes up in the minecraft window
--- BEGIN ERROR REPORT a1dce528 --------
Generated 15/04/11 12:49 PM
Minecraft: Minecraft Alpha v1.1.2
[code]....
View 3 Replies
View Related
Jan 19, 2010
I decided I wanted to give ubuntu a go by installing it on a 4GB USB drive.
I installed it using this guide url.
I booted up and it hung on the 'mounting file system', I left it for ages and eventually it goes to a black screen and prints out an error message, I can't type anything on my keyboard.
View 3 Replies
View Related
Jan 24, 2011
I have ubuntu CD. When I try to install it inside the window through wubi installer. I choose install inside the window. After installing when computer reboots. I got two option. When I choose ubuntu for boot. After 5-6 seconds a black screen appears like command and installation stopped here. {This screen is full of lines, somthing like...Kvasprintf..//.... acpi,,??//. It says lots of about ACPI. What should I do. When I boot through ubuntu cd, same problem arrives. I am new to ubuntu.}
View 1 Replies
View Related
May 1, 2011
3/4 of the way through the install the reboot black screen : The disk drive for / is not ready yet or not present continue to wait; or press S to skip mounting or M for manual recovery . neither works, was running Ubuntu 10.4.
View 1 Replies
View Related
Aug 30, 2010
For anyone interested in testing new xorg stuff, here it is: [URL]. The good news is that this package set should work fine in either 13.1 or -current. The build box is 13.1, so I know they're compatible there; however, I'm running them on both 13.1 and -current systems, so I'm pretty sure they'll work on either. Be sure to read the NOTES file before you go digging around in PACKAGES.
View 14 Replies
View Related
May 19, 2011
I have the normal OS choices menu (Windows XP or Unbuntu) but when I choose ubuntu I get an instant flash of an error message on a black screen so quick I cannot read the whole thing but I caught "error" and "format" and then the computer reboots. I have no problem getting into Windows.
View 5 Replies
View Related
Jul 9, 2009
I'm trying to install Fedora 11 on a Dell Latitude c810 (PIII 1ghz, 256mb ram, GeForce2 GO)
When trying to boot from the Live CD it goes to the first fedora boot screen where it counts down from 10 then tries to boot.
It then says "IO Apic resources could not be allocated" then moves onto a fedora loading bar which completes... but the next screen is completely black, I've tried letting it stay there for 10 or so minutes but nothing happens.
View 7 Replies
View Related
Oct 8, 2010
I managed to get following config up and running very nicely with an 11.3 installation. But recently I did a clean install of the OS and hoping to preserve my data in the home HD (2TB) partition I did the following operation which resulted in black screen screen with error 15: file not found.
Config: one SSD root (90GB) and swap (30Gb) second HD for home (2TB)
During the installation I reformatted and mounted the SSD with root and swap as above. I left the home HD (2TB) unformatted and mounted as home.
When I did my first boot up, it worked perfectly - Even Fire Fox booted up with my recovered pages as of my last install! However after installing my multi-media codecs, and security updates, etc. to the fresh install I rebooted the system only to discover that I am unable to get past GRUB!
I don't have to lose my data every time I do a fresh install to new ISO release.
View 9 Replies
View Related
Jan 1, 2010
Im newer in ubuntu i try to install ubuntu 9.10 in my Laptop HP DV5 Core2Duo 4Go Ram rin Windows 7 32bits and in Disc C: already windows 7 install on then i want install the both in th same HDD, like the same operation i make it in my Desktop Dell and it work perfectly, but now i have a error message please see Screenshot and I try to boot from CD and install Ubunto also i have screen black with 1000 ligne error
View 7 Replies
View Related
Jul 1, 2010
When i boot my pc there is a black screen and then a message appears (initlymouth-splash main process(856) terminated with status 1) Some other times only this appears '' _ '' blinking (i don't remember how it is called in english,sorry) I hold Ctrl+Alt+Delete and then the screen where i choose profile comes up. I have 10.04 since they came out,and didn't have any problem except one issue with my belkin adaptor,but now i can't sync my iphone with rhythmbox or detect any flash sticks.
View 1 Replies
View Related
Feb 28, 2011
When I am using emacs under GNU Screen, if I call C-x C-s screen hangs and does not respond to any keyboard input.
I can't reproduce this, but at least one time per day I have to kill my screen session and restart it.
View 1 Replies
View Related
Jun 2, 2011
I install UBUNTU 1104 on HP Desktop PC, but now it doesnt start. Just appears a Black screen with this msg: Error Code = 1001.
I want reinstall but PC is not reading CD, But the CD drive is working.
I install UBUNTU 11 in other 6 PCs, and work fine.
PC inf.: HP Compaq dc5800 Small Form Factor
I never install Windows on this PC. The original OS was UBUNTU 9.04 and updates.
View 2 Replies
View Related
May 12, 2010
I can't seem to get Ubuntu to run on my old Dell Dimension 2300. It boots to a purple screen then it goes to a black screen with a load of writing nothing else happens after this screen. [URL] Could someone advise how I can get it to work?
View 1 Replies
View Related
Aug 19, 2010
I am experiencing a problem with the DVD reader/burner... At first, I would come up to my office and noticed that the DVD tray was opened... Strange because I never use it and did not remembered to have used it. When it happened, I simply closed the dvd tray and I was all set (until the next time). This issue occurred several times within the last month... Today, it happened again, but this time, I close the tray, it stayed closed for 8-10 seconds and reopens by itself again! It happened 5 o 6 times in a row until 5 minutes ago, I closed the tray and it stayed closed...
View 11 Replies
View Related
Dec 8, 2010
I turned on my Acer laptop and during bootup it seemed normal. After it passed the blue Acer logo, all I could see is a black screen and a black cursor outlined in white in the shape of an X. Thinking it would be a one time thing, I turned it off again.it still was a black screen.
View 14 Replies
View Related
Feb 21, 2010
Few days after installing Ubunto 9.10, during installation of gstreamer, the installation utility got stuck, and with it the whole desktop icons. (I think the gstreamer has nothing to do with it). When I tried to execute some icon, like the terminal, it will not open. After restarting the computer, I get a tty1 login terminal and not the graphical one (tty7). When pressing Ctrl+Alt+F7, nothing happens. It switches to a black screen. "sudo startx", gives some error log. I already reinstalled the X-server, ubuntu desktop and other stuff.
What can be the problem? Is it related to my video card (nvidia 7600 GT)? I didn't install any nvidia specific driver. This happened to me earlier and I reinstalled Ubunto. I think maybe I should move to some other distribution.
View 1 Replies
View Related
